Printable View
D22 Alpha 1 bios tested by Mr Dani
System Spec & Setup:
Motherboard: Abit NF7-S v2.0
Bios : d22Alpha1
Processor : Barton 2500+ ( 254 x 12) = 3056MHz
Memory : 2x256Mb Kingston Hyper-X PC3000
Timing: 2-2-2-5,
CPU Interface : ON
Cooling:
Cpu :High Pressure CO2 gas -> dry ice Cooling
NorthBridge: 80 Watt Peltier + Watercooling
http://downloads.modlabs.net/bios/pic/dani1.jpg
http://downloads.modlabs.net/bios/pic/dani2.jpg
PiFast33 = 20.37sec
http://downloads.modlabs.net/bios/pic/dani-pi.gif
Super PI 1M = 33sec
http://downloads.modlabs.net/bios/pic/dani3.gif
Hexus PI Fast V4.3 32M = 149.41sec
http://downloads.modlabs.net/bios/pic/dani-32m.gif
great job :toast:
this period seems to be the a32@3.0ghz period :D
ya that is normal barton... hope he can grab some Mobile barton run it on Dry Ice...
an vtt mod may help him go at higher FSb than that hopefully :)
Dani got some nice results out of that chip.
VTT mod- is that the same as VBT mod for 1/2 of vdimm?
Seems noone knows of a vbt mod for the NF7...........
Nice results man, very nice.
Next, you oughta hook up some chilled water to teh videocard and run some 3dmark. :)
ya Vtt = vbt = 1/2 vdimm volt
the vtt/vbt stuck @ 1.54V(2.9V in bios) even after vdimm mod
so we assume that Vtt/vbt voltage limitng the FSB....
he just plan for high fsb n high clock speed....
not sure if he dare to put his 9800xt on it... or it will end dead...hehehe :D
254x12 CPU-int ON?!
Is that bios magic or what...
Awesome OC!
dry ice coolers are such a beautiful thing!!
sweet clocks man
one word: awsome:toast:
Very nice man. :toast:
Good job. :toast:
awesome bro
is this Mr. Dani a member of these forums? if not he should register so he can comment on the results himself
ya ...HellFire if u find the right way to Vtt/Vbt mod let me know will pass it to mr Dani... he need it very badly...heheheQuote:
Originally posted by Hell-Fire
Very nice man. :toast:
Ya he is here... but i'm not sure what is his nickname here..... :D
nice chip he's got there and one hell of an oc :)
Whoa awesome!
How fun! All this dry ice action this week... FUN!!
C
Very nice and g8 finish.
but was the pelt. really needed or is that just for showoff :toast:
Ok, I have to ask now... whats up with you dry-icers attaching the jedi bit? I thought it was just charlie's thing but is there some kind of reason?
Exactly what I was thinking. Sounded like he was talking about Charlie, but now theres someone else thinking he can use that name too? :rolleyes:Quote:
Originally posted by texuspete2k2
Ok, I have to ask now... whats up with you dry-icers attaching the jedi bit? I thought it was just charlie's thing but is there some kind of reason?
Quote:
Originally posted by Soulburner
Exactly what I was thinking. Sounded like he was talking about Charlie, but now theres someone else thinking he can use that name too? :rolleyes:
followers tugging on my pant leg.... :stick:
The one and ONLY, I've frozen P4, Prescott, Athlon AND Sledgehamer.......
C
ok i will change the title...
tictac,
no big deal! BTW, my latest XP-M overclock to 3133mHz is using one of your BIOS!!
C
ya ... abit just release D23... have u try it.... they said it have better 3d mark score on it...
Bios Setting
**********
Vcore = 2.25V
APIC Mode : Disable
SATA Controller : Disable
Firewire Controller : Disable
USB Controller : Disable
80watt peltier cooling... just to make sure the NB temp didnt holding his FSB Back....
lol... sorry curiousity has just been getting the better of me. Not calling anyone a copycat. Thought there might be a reason. Charlie's says "the original" so there could have been a pack. I never knew charlie's reason but thought there could be a "dry ice jedi's 3d team" for all I know.
:toast:
ya... sorry i didnt know there is certain people only can use JEDI word...
sorry i'm new here... correct me if i'm wrong
Charlie...... the D23 SUB-Zero ready for u to dry ice it.... GL
D23 SUB-ZER0
SATA 4247
http://downloads.modlabs.net/bios/be...BZER0-4247.zip
SATA 4227
http://downloads.modlabs.net/bios/be...BZER0-4227.zip