Printable View
Finally found one worth writing home about:banana:
Mach1 cooled -15 idle, -5 loaded, IC7-G temps are from onboard sensor, so relative at best....
Screenshot is max I've done so far, gonna let it burn for a bit before juicing it.... Guess there is an OC god afterall :D
EDIT: almost forgot, this thing defaults in bios @ 1.475V anone elses do this?
not too shabby! enjoy it
think you can get 4.4 stable?:banana:
nice...cook it all the way!:toast:
Very nice indeed! Is that an abnormal cap cluster on the bottom of the package?
I've seen a few but it's been a while?
its an m0 right? amazing oc! :eek:
mod your prommie and give it more volts! m0s love volts
Look at cpuz... It's not an m0 but sure looks like it. I think it's a new package.
no, its not an M0, its a 3.0C:rolleyes:....... But its an EPA, the new NW. You can only know if you have one when you open the box. Its like some M0s(M0s are EPA) they love voltage like EE and they OC very well......
Nice OC....
Quote:
Originally posted by saaya
its an m0 right? amazing oc! :eek:
mod your prommie and give it more volts! m0s love volts
Its a D1 stepping, bottom of processor looks like M0 though, I got to pick from the box, first one they brought out for me had a few missing on the bottom, looked like my 2.4C.. Told them I didn't want that one, lol..
Poki, as far as I know the bottom is the same as the M0, or the EE processors, but all P4's do not look like that.
My 2.4C is missing 9 components compared to this one.
Those that misse 9 cap are the older, non-EPA ones....
Quote:
Originally posted by skate2snow
Those that misse 9 cap are the older, non-EPA ones....
Uh, yeah, ty, I know..
does it like volts? it DOES look like a remarked gallatin core, so even if its not an m0 stepping its pretty much the same thing.
you could remove the ihs, but it seems to be very hard to do, most people who got a remarked gallatin core killed the chip by removing the ihs, ive only seen one guy who managed to get the ihs off his m0 chip.
erm, why not just use a fishing wire to take off the IHS, it wont damage anything because if the IHS doesnt wanna come off, it wont. Just dont force it.
well afaik the newe P4s are all glued to the ihs with termal epoxy. it wont come off if you dont really pull on it... you just have to know how hard to pull. i think if you steadily increase the pressure very slowly it will come off after maybe half an hour. maybe freezing helps to get the epoxy weakened...
Not sure if it likes Volts yet, I'll run a bit harder in a few days, that processor was only an hour or so old in those screenies...
And nope, not going to try taking off the IHS, not after seeing what a few drops of epoxy can do when applied to it;)
Karnivore
Is it stable @ 4.3?
Quote:
Originally posted by IvanAndreevich
Karnivore
Is it stable @ 4.3?
Yes, it is stable, have been stress testing since I put it together, it feels like it may have some more in it, usually when I get near a P4's limit I can feel it in the way windows acts, even though stable, it just acts different, maybe a bit sluggish... Not sure how to explain it, thats my best shot. windows doesn't feel like its near the edge, I guess the next few days will tell. Even if its the end I'm happy..
Amazing :slobber: !
Ordered one of them, I hope i get one with the M0 style
Amazing overclock.... In percentage quite close to my CPU (comparing apples and oranges, i know) Good luck with the stepping, cant wait to see how it reacts to voltage
Quote:
Originally posted by Karnivore
Finally found one worth writing home about:banana:
Mach1 cooled -15 idle, -5 loaded, IC7-G temps are from onboard sensor, so relative at best....
Screenshot is max I've done so far, gonna let it burn for a bit before juicing it.... Guess there is an OC god afterall :D
EDIT: almost forgot, this thing defaults in bios @ 1.475V anone elses do this?
:rolleyes: hmm.. your Cpu-z says 1.65V at Vcore ??? look self :confused: if you say stock vcore it should be 1.488v in cpu-z
right ????
He meant that the default vcore in the bios is 1,475v
Yes, sorry to confuse, Default Voltage is 1.475, thats not where I was running it....Quote:
Originally posted by cold_ice
He meant that the default vcore in the bios is 1,475v
But here is an update, still runnig to see if its stable, so far it is, typing on it atm, while it primes and folds some old proteins..
I believe this will be near the limit without some serious volts, going to butn it in for a few days @ 4.4 then give it another shot..
that is one hell of a cpu, overclocks better than SL6WU!
bad super pi time at 4500mhz tho.. I got 32sek at 4500mhz 3:2...
Karnivore
:D you are my hero !!! Great Oc there dude :banana: :toast: yeah... 4,5ghz are Respecta
Quote:
Originally posted by dpa
that is one hell of a cpu, overclocks better than SL6WU!
bad super pi time at 4500mhz tho.. I got 32sek at 4500mhz 3:2...
Uhhm , well I'm running Mushkin PC2100, 3:2 3,4,4,8... lol, that might just be the reason, and I wasn't real concerned with SPI times, just stability.. I imagine I could do a bit better once I get some memory in it...
Quote:
Originally posted by PytonOrm
Karnivore
:D you are my hero !!! Great Oc there dude :banana: :toast: yeah... 4,5ghz are Respecta
:D ty for the kind words, but anyone can do the same thing, they just need a bit of luck when picking out CPU:toast:
Karnivore
:D this is what i do with stock vcore, my sweet 2,4ghz and prometeia mach I
http://w1.565.telia.com/~u56506172/Rekord.jpg
Nice 2.4:toast:
hehe, 3-4-4-8 really sucks... is the cpu stable at 4500mhz now?Quote:
Originally posted by Karnivore
Uhhm , well I'm running Mushkin PC2100, 3:2 3,4,4,8... lol, that might just be the reason, and I wasn't real concerned with SPI times, just stability.. I imagine I could do a bit better once I get some memory in it...
:D my vapochill runs fine and i will put on my Nb !!
http://w1.565.telia.com/~u56506172/DSCF0001.JPG
poor Prometeia mach I runs a lot
http://w1.565.telia.com/~u56506172/IMAG0009.JPG
could you give batch numbers, stepping, and pack dates please?
Very nice. Now get some memory and enjoy your system.
SL6WF
L311A875
Malay
pack date ? my box are not here.... i think it was 05/12/2003 ??? :confused:
Yes it is stable so far @ 4.5, sorry no pack date, was not a boxed processor, the pics in the original post represent all the info I have...
Nice OC guys........ @ 4.5 mine starts to boil ......:p:
haha don't think so farbror but it would be
kewl ;)
Then bring on the volts :D Id like to see what that could do with a better phase changer, do you have a Mach II, or are you going to recharge that Mach I?Quote:
Originally posted by Karnivore
Yes, sorry to confuse, Default Voltage is 1.475, thats not where I was running it....
But here is an update, still runnig to see if its stable, so far it is, typing on it atm, while it primes and folds some old proteins..
I believe this will be near the limit without some serious volts, going to butn it in for a few days @ 4.4 then give it another shot..