Printable View
http://www.maxvla.com/host/sl6wk.JPG
http://www.maxvla.com/ebay/p4label.jpg
1.75v
who needs a SL6WU when a SL6WK is just as good? :D
Thermalright SLK947U + 92mm 3krpm panaflo
need to put my bh5 ram in so i can run 2 2 2 5 5:4 instead of 1:1 3 4 4 8 like in the pic
3.8 with good aircooling isn't all that :D
4 GHz on teh boxed cooler, now were talking.
many people run there SL6WU @ 3.8Ghz and stock volt.. with BOXED cooler..
SL6WU IS better than yours.. sorry mac..
nice to know i can count on rude comments.Quote:
Originally posted by Crankster
3.8 with good aircooling isn't all that :D
4 GHz on teh boxed cooler, now were talking.
so far i've only seen 1 person with 4ghz on the boxed cooler and that was with 13c ambient temps with his window open. my room is about 75f.
my friend got a sl6wu last night and it won't go past 3750 no matter what he did.
what a bunch of nice members here.
Nice OC Max. I'd like to see what that chip can do on water (if you still have your setup that is)
I'm thinking of going the 3.0c route for my next upgrade.
even though I've never owned an Intel, nice overclock :)
I would like to see what kind of 3dmark scores you can get at those speeds.
thanks
water is LONG gone. sold that like 6 months ago. i suspect i'd get another 50-150mhz out of it at best.Quote:
Originally posted by Gogeta
Nice OC Max. I'd like to see what that chip can do on water (if you still have your setup that is)
I'm thinking of going the 3.0c route for my next upgrade.
i don't have good ram in the rig right now so my timings are really bad. i scored 15,150 with a 9600pro 510/360 with chipspeed somewhere around 3750mhz. i really haven't had time to mess with this rig much.Quote:
Originally posted by Alex08
even though I've never owned an Intel, nice overclock :)
I would like to see what kind of 3dmark scores you can get at those speeds.
thanks
i might move my 9800pro over to see how it does in the next few days.
I bet you'd hit 4ghz with water... Go buy it back man ! ;)Quote:
Originally posted by Maxvla
water is LONG gone. sold that like 6 months ago. i suspect i'd get another 50-150mhz out of it at best.
i dont post anymore bec of that same reason. try to share info and you get beated down on it.Quote:
Originally posted by Maxvla
nice to know i can count on rude comments.
so far i've only seen 1 person with 4ghz on the boxed cooler and that was with 13c ambient temps with his window open. my room is about 75f.
my friend got a sl6wu last night and it won't go past 3750 no matter what he did.
i think thats great tho.
I would love to have a chip like that. I just got done with another crap 2.4c. I need a nice chip like that to take advantage of my prommy.
Great oc :toast:
i'm done with water. from now on its going to be air or phasechange only. if i have to go through the hassle and expense i might as well go for the top.Quote:
Originally posted by retrospooty
I bet you'd hit 4ghz with water... Go buy it back man ! ;)
Only if I could drag myself over to the darkside one day. Nice OC
OMG, 3.0 at 3.8 with default voltage? dang man, i couldnt get my SL6WU past 3.75ghz at 1.7v! nice chip you got there bro...
nope. 1.75v. its no miracle chip, but a pretty good one. easy 4ghz with a prommie.. now if i could just find one dirt cheap.......... hmm...Quote:
Originally posted by daos
OMG, 3.0 at 3.8 with default voltage? dang man, i couldnt get my SL6WU past 3.75ghz at 1.7v! nice chip you got there bro...
I should have one coming from MR. captaincascade soon but it's not dirt cheap but IMO will be well worth it.
I really don't think my comment was rude... More out of misguided envy than anything else, if you were offended then i am sorry.
these chips love the cold. got my SL6WU yesterday ...and priming now @ 3.825 @ default voltage (on my prommie tho :p: ) shud hit 4G by tonight, easy does it ;) good job tho
it was more the other guy than you. sorry if it looked like you were the only one i was talking about.Quote:
Originally posted by Crankster
I really don't think my comment was rude... More out of misguided envy than anything else, if you were offended then i am sorry.
the combo effect of both posts was rather distasteful shall i say..
anyways.. no hard feelings. forgive and forget.
Nice OC, my SL6WK would only do 3.7 on air, stable anyways.
Show us where. Not all SL6WU or SL6WK overclock equal. You'll always have good ones and bad ones.Quote:
Originally posted by dpa
many people run there SL6WU @ 3.8Ghz and stock volt.. with BOXED cooler..
SL6WU IS better than yours.. sorry mac..
If you have nothing more constructive to say, I suggest you don't reply at all.
Man, I hate it when someone accomplishes something nice, and then gets bashed in return. :upset:
// end rant.
Nice oc Max. Think that 3.9Ghz is possible?
I really think that the environment means more than ppl think... I thought about it a lot and i don't think a conclusion can be drawn that easy regarding steppings and OCing potetial. Considering that different stepping behave differently in diffrent motherboards andthe environment. I myself "run hot" so i usually have about 15 degrees at home + i don't mind fannoise so i can run my 2100+ @ 2600 mhz without mods infintely. The first person to test all the "good" steppings, on different motherboards with good burn-in and multiple resats is my role-model. I have tossed the gauntlet. :D
thats true, my sl6wu only gets 3.6ghz stable. 250fsb fails prime at any voltage.Quote:
Originally posted by Jupiler
Show us where. Not all SL6WU or SL6WK overclock equal. You'll always have good ones and bad ones.
If you have nothing more constructive to say, I suggest you don't reply at all.
Man, I hate it when someone accomplishes something nice, and then gets bashed in return. :upset:
// end rant.
Nice oc Max. Think that 3.9Ghz is possible?
Too bad AZN, nothing else is crappig out? Like memory or divider-trouble... But i assume you have tried another CPU from your post, correct?
Congrats Maxvla :D you have a very good chip there. :thumpsup:
Well, I had a SL6WK could reach 3.8(253FSB) with aircooling and 1.65 VCore. With WaterCooling HC200 4GHz + 1.75VCore was rock stable.
I believe that it is luck. I had other 2 CPUs of the same sSPec#, they didn't OC equally. Don't let yourself discourage.
Greetings.
BTW Also I had problems up 3.7, after burn-in(Prime95+1.8V) I could get the 4GHz OC. :confused: I didn't believe in that.
http://galeon.com/almacengma/A.PNG
not on air. i need alot of vcore for 3831 in that shot. i think with a prommie i'd be right at 4ghz or slightly over.Quote:
Originally posted by Jupiler
Show us where. Not all SL6WU or SL6WK overclock equal. You'll always have good ones and bad ones.
If you have nothing more constructive to say, I suggest you don't reply at all.
Man, I hate it when someone accomplishes something nice, and then gets bashed in return. :upset:
// end rant.
Nice oc Max. Think that 3.9Ghz is possible?
thanks.Quote:
Originally posted by Goyo
Congrats Maxvla :D you have a very good chip there. :thumpsup:
Well, I had a SL6WK could reach 3.8(253FSB) with aircooling and 1.65 VCore. With WaterCooling HC200 4GHz + 1.75VCore was rock stable.
I believe that it is luck. I had other 2 CPUs of the same sSPec#, they didn't OC equally. Don't let yourself discourage.
Greetings.
BTW Also I had problems up 3.7, after burn-in(Prime95+1.8V) I could get the 4GHz OC. :confused: I didn't believe in that.
http://galeon.com/almacengma/A.PNG
lol i love this pic. "Socket populated" what else is it going to say? the stupid program wouldn't even be running without the socket being populated. heh
nothing else but the crappy CPU. well its not crappy but its not as good as others. I've been doing this for awhile now and im 99.999999999% sure its the cpu. ;)Quote:
Originally posted by Crankster
Too bad AZN, nothing else is crappig out? Like memory or divider-trouble... But i assume you have tried another CPU from your post, correct?
Quote:
Originally posted by Maxvla
thanks.
lol i love this pic. "Socket populated" what else is it going to say? the stupid program wouldn't even be running without the socket being populated. heh
well, it probably also works for dual cpu mobos so it could say cpu2 socket not populated.
ah very good point :)Quote:
Originally posted by Slickthellama
well, it probably also works for dual cpu mobos so it could say cpu2 socket not populated.
Nice chip max. :D