http://upl.mine.nu/uplfolders/upload9/2801mhzcpuz.jpg
Only a fast test not maxed yet :)
:banana: :banana: :banana: :banana:
Printable View
http://upl.mine.nu/uplfolders/upload9/2801mhzcpuz.jpg
Only a fast test not maxed yet :)
:banana: :banana: :banana: :banana:
:slobber: :slobber: :slobber: :slobber: :slobber:
That 3d stable?
Holly Tit Batman. Nice OC
:slobber: :slobber: :slobber: :slobber: :slobber:
:D Nice one.Quote:
Originally posted by Lastviking
Only a fast test not maxed yet :)
TDF.
:slobber: :thumbsup:
ABIT--> :flame: <--DFI
:stick: :D
hmm... that's what i call inspiration :-) congrats, man :thumbsup: :thumbsup:
Where can i buy some air from Sweden ??? :D
where did you get that thronton 2400? and whats the stepping on it
im thinking of getting on of those or a 2000+ or a 1.8 duron
lastviking, come on, gimme a few sandra benches.. i'm drooling already, but hey... i got soaked yesterday by my waterpump going of in my face, now i wanna drown in my drool :D
Let's see some benches, like Super PI :)
I wish I could do that in good old FL weather :D
omfg that is an alsome fsb oc. as soon as i can get a new psu and my iceberq4 pro on my nb then i should be doing some better ocing
nice work, wouldnt mind seeing some Super PI benchies either.
what temps are you getting on your cpu?
We want some SuperPI! :eek:
btw. What roomtemp do you have?
This is insane man... omfg :D
LastViking,
Nice FSB!!! What cooling are you using on NB and mosfets?
methinks this is on frigid -3° outside air kinda thing.
LV: we all love your for this, but hate you cuz we want it.. lol.. hows it feel? :p:
lol i live in aus, last week or so here the temp's have been over 30 degrees celcius :mad: very nice oc viking, 280 fsb = incredible bandwidth, cant believe you pulled that on air :slobber:
Very nice, now some benchmark screenies plz ;) :thumbsup:
lol @ Sporky
me thinks the temps are more like -40 degrees celcius!
;)
Hm if it's not stable I think it's no great achievement with 2,2v onc pu and 3,6v on ram.
:rolleyes:
get the termaltake heatsink with heat pipes! should give you at least 5°C lower temps!
hmm..jalous? :DQuote:
Originally posted by sai
Hm if it's not stable I think it's no great achievement with 2,2v onc pu and 3,6v on ram.
:rolleyes:
No great achievement my @ss. I have a good 2500+ but it's nowhere near 2800MHz. Ok, maybe its not stable but still.. 2800Mhz man!! Thats prommy style!
thermalright sp-97... ;)Quote:
Originally posted by saaya
get the termaltake heatsink with heat pipes! should give you at least 5°C lower temps!
Prommy doesn't always have to gain more Mhz, I know enough people which didn't even gain a Mhz with Prommy.
And why should I be jealous about that system, I bet there are enough others out there with more Mhz, who cares ..
Well, it's also not nice to LV. Obviously he's very proud of it and then you come and say it's nothing. Why?Quote:
Originally posted by sai
Prommy doesn't always have to gain more Mhz, I know enough people which didn't even gain a Mhz with Prommy.
And why should I be jealous about that system, I bet there are enough others out there with more Mhz, who cares ..
Just my 2 cents.. ;)
Well it's not my intention to frustate someone :stick:
Yah i agree,
Sai man this guys achievements are very impressive, stable or not. Show a little respect at least; even if you dont think it is a great achievement.
Go and find other peeps who have ran a amd chip k7 chip @ 2800mhz on air then at least u can back up what u are saying, i very much doubt that u will.
enuff said.
Yo LastViking, i know u must have frozen your nuts off their to get that overclk, congratulations dude
:toast:
I won't find many probably because of not many boards have 2,2v for cpu :rolleyes:
u know guys, u can really look at it both ways... achievement or not...
some would probably even disagree it's "pure air"... it might be just like saying that one has pure watercooling when in fact one cools with chilled watercooling setup. sounds about the same but it's not...
if that baby is prime95 and 3D stable then it's great achievement but it would be even greater if it was on "normal" room temeperature 18-22C and able to keep it 24/7 year round...
my system is rock solid at 2604mhz. it's doesn't even run hot - max 45C while priming... it's "fairly" stable at 2640mhz... it hangs at logon at 2700mhz...
personally, people, show off your STABLE results... otherwise it doesn't have any practical or educational value...
happy OCing,
EDIT: i'm not saying anything here, just to show you what can be done with 8rdavcore for NF7-S... just while we're all waiting for some stability proof...
http://www.speakeasy.org/~michasmisi.../2700small.jpg
K if you think it´s so easy then show me you cane do this self....You have almost same stuff like me why can´t you run @10x280?"2800mhz"..Show me anyone who have done "280fsb + 2800mhz , aircoled , nf2" .. if you found one another then me i think this my overclock sucks...but a have not maxed yet..Sisandrabenchen will come later on...working to much know.Quote:
Originally posted by sai
I won't find many probably because of not many boards have 2,2v for cpu :rolleyes:
And my board don´t have 2.2v in bios......i think only NF7&AN7 have it...(2.3v)
But i cane show somemore pics modds and more..
And this post was for showing that this board don´t problem like many another boards(you cane run high fsb with high vcore and high cpu speed"
One more thing..I don´t think i cane do 280x10.5 yet... And i cant run so much higher fsb..so next step is to higher multiplier but then i cant run my max fsb....So the cpu is not maxed in this screen...but fsb is almost that maybe i cane run like 281,282 but i think is very hard..So the Cpu is not maxed!
sure, it's not easy... vcore mod, vdimm mod, psu mod... that takes time and effort...
but keep in mind that u have good BH-5 and u feed it with almost 3.6v! ... and then there is this "cold air" thing....
besides, before everybody gets excited - and u too :-) - please prepare some stability screens and benches maybe... coz like i said if it's not stable then it's useless...
and btw, sandra is not a stability proof... i can bench sandra at 236FSB but it's nowhere near stable besides that...
if u could post links to 3DMarks and AM3 then i say it's awesome overclock... ;)
yeah, I'd like to see some 3dmark scores too. What card are you running? r9800p?
K i don´t have any 3Dmark2001 screen yet.. but i have runed @270fsb in 3Dmark2001. And 2620mhz@2.0v...but i think 280fsb is to high without any more modds..And 2800mhz"150watt"+ cane be hard with aircoling in 3Dmark2001...I have one screen @268Fsb in 3Dmark2001.. But if anyone have runed so high like 270fsb+ in 3Dmark2001 with NF2 i think my overclock sucks...But give me some screens first...Quote:
Originally posted by bachus_anonym
sure, it's not easy... vcore mod, vdimm mod, psu mod... that takes time and effort...
but keep in mind that u have good BH-5 and u feed it with almost 3.6v! ... and then there is this "cold air" thing....
besides, before everybody gets excited - and u too :-) - please prepare some stability screens and benches maybe... coz like i said if it's not stable then it's useless...
and btw, sandra is not a stability proof... i can bench sandra at 236FSB but it's nowhere near stable besides that...
if u could post links to 3DMarks and AM3 then i say it's awesome overclock... ;)
I cane post the screen @268fsb...but that score sucks...used WinMe and not tweaked. If you want to see it then i post it..
is 268FSB totally stable? i mean, suitable for everyday use - benches, games and so on... coz i think that's what counts, right...? what would be the point of keeping the system at settings that are not stable whatsoever...
i just think that this race between, say, you, xDUCK and Shroomalistic in search of the highest FSB no matter what stability is just little bit pointless... u should just stop posting unless u can back it up with links and screens... just my two cents...
"Taco" did Super PI @ 2,8G with aircooled Duron 1600. But that's the highest AMD on air I've seen.Quote:
Originally posted by mongoled
Go and find other peeps who have ran a amd chip k7 chip @ 2800mhz on air then at least u can back up what u are saying, i very much doubt that u will.
very well Lastviking
dfi rulezzz :toast:
Bachus, man would you just chill. Rather than diss him for not putting up stable screenies, just ASK him what he's able to do 24/7 stable. Benchmarking is not about 24/7 stability, it's about being stable enough to finish the test.
If you're wanting a Prime screenie, just ask, I'm sure he'd put that up when he has time to find what's stable.
i don't mean to put up anyones fire but searching for the highest although not stable FSB is not benchmarking... that's why i asked:Quote:
Originally posted by BMORIN
Bachus, man would you just chill. Rather than diss him for not putting up stable screenies, just ASK him what he's able to do 24/7 stable. Benchmarking is not about 24/7 stability, it's about being stable enough to finish the test.
If you're wanting a Prime screenie, just ask, I'm sure he'd put that up when he has time to find what's stable.
so far we don't know if that 280x10 is capable of doing anything else than just WCPUID screen... if i would like to show off my highest OC then i would just prepare for that with set of benchmark's results and screens to avoid getting post from people like myself ;) being little sceptic about usability of particular OC.Quote:
is 268FSB totally stable? i mean, suitable for everyday use - benches, games and so on... coz i think that's what counts, right...?
also, how could u benchmark with 3DMarks, AM3, SuperPI or PIFast if system is not stable...?
once again, i don't mean to do any harm to anybody... i think it's the best forum with most experienced members...
"If you can't say something nice, then don't say anything at all"Quote:
Originally posted by sai
Well it's not my intention to frustate someone :stick:
;)
Quote:
Originally posted by bachus_anonym
is 268FSB totally stable? i mean, suitable for everyday use - benches, games and so on... coz i think that's what counts, right...? what would be the point of keeping the system at settings that are not stable whatsoever...
i just think that this race between, say, you, xDUCK and Shroomalistic in search of the highest FSB no matter what stability is just little bit pointless... u should just stop posting unless u can back it up with links and screens... just my two cents...
http://upl.mine.nu/uplfolders/upload4/3dmark268fsb.jpg
This was long time ago..And i don´t want to run prime @ higher vdimm than 3.3v+ . And i don´t wana higher my timings........So i give you only 3DMarks.. 24/7 use is one thing.. Highest on Orb is one thing"Maybe you think they run Orb speeds @ 24/7?!". So cold down plz i work 2 much so don´t hurry...I give you higer fsb+cpu speed in 3Dmark2001 when i have time....And highest memmory bench is one thing. I don´t OC becuse of high 24/7 speeds...
http://upl.mine.nu/uplfolders/upload9/sisoft280.jpg
You are looking for high 24/7 speeds but i´m are looking for high fsb speeds in sisoftsandra..."I like mc you like cars", "I like Red you like Green"
:stick:
there u go :) and i saw those screens before, i think... i'm happy now ;)
i wouldn't want u to run 268FSB/2.55ghz at 3.62v day 'n night and i know that ORB or ARC is not about 24/7 setups... when u r able to complete all those benches that's enough. it proofs that it's stable but doesn't necessarly mean u need to run it 24/7 even though it's capable of it...
i wish u good luck in getting this 280x10 stable enough to submit results to ORB and ARC... :toast: i'm looking forward to seeing that
stay cool ;)
I thought there was many differant facets to this sport.
Some just want to play games at theyre maximum settings.
Some want to get more performance for their money.
Some the highest FSB, or highest Mhz, most bandwidth.......
The list goes on, its not for any one person infact not for anyone to say what is and isn't worthy of posting.
We may all differ in our interest, if this doesn't interest you, because it doesn't fit in with your notion of whats a achievement and what isn't. Why not go and find a thread that fits, don't knock the mans achievement.
'suitable for everyday use - benches, games and so on... coz i think that's what counts, right...?' Wrong, by that reasoning what do you make of OPP's top score on the ORB do you really think he could use that setup for 'everyday use' running like that ?
The best or amongst the best of anything is a great achievement.
TDF.
edited the dyslexic bits.
good results m8, cant w8 to see the new results, dont worry about some others, like u said your basically playing 2 different games
Dave
Keep up the good work lastviking!!! :toast:
It's awesome to even reach these FSB speeds, if stable or not! One has to keep in mind that even taking a screeny at 280 MHz FSB surely needs some percentage of stability that has to be reached by others before complaining about your results! ;)
It's not hard to complain, but it's had to compete! :D
You sure did DFI a favour and I was thinking about buying one of those infinity boards just from the moment I saw your first thread, showing over 260MHz FSB on that nf2 board.
You got better and better results and many fellow overclockers must try to keep their hands away from their mouse, whenever coming across an "order" button for a DFI Nforce2 Ultra 400 Infinity or Lanparty B in a online shop. :D
greets
Ingmar :)
I know I already told you this, but congrats on the OC mate. You are a true enthusiast among enthusiasts. :toast:
yah, just to reiterate, AWESOME OC man. youre giving me hope that my nF2 mobo could go that high, lol.
also where did ya get the proc, and did ya do any unique mods like hipro does? if so could ya post em
Whoa holy §§§§ nice clocks. Damn cold weather its seriously hot here.
I disagree with this, and only this statement. A benchmark is any measure of capability.Quote:
Originally posted by bachus_anonym
i don't mean to put up anyones fire but searching for the highest although not stable FSB is not benchmarking... that's why i asked:
...
Is a drag race a benchmark? Or, is only an endurance race completed a benchmark? IMO, both are.
i believe we could discuss it for a long time...Quote:
Originally posted by sjohnson
I disagree with this, and only this statement. A benchmark is any measure of capability.
Is a drag race a benchmark? Or, is only an endurance race completed a benchmark? IMO, both are.
every OCer knows that benchmarks are not all equal... some require almost full "prime95" stability (like 3DMarks, SuperPI, PiFast or AM3) and some can do with so-so stability (like Sandra). and there are also tools like ClockGen or 8rdavcore that can help with raising FSB or CPU speed to the point at which windows wouldn't boot at all if done the "oldskool" way, from BIOS (i showed that with my 2.7Ghz screen)...
and i agree, benchmark is definetely measure of capability... but i also think that xtreme OCing without full stability feels kind of not complete... don't we all OC to have great, very fast and stable PCs that we can use for everything else rather than taking WCPUID and Sandra screens?
i don't want to write anything else about it here... i said what i felt i should...
If it's at least 3DMark's stable then mission is complete... if it's only for Sandra then there's still long way to go...
i better take care of my R9800P vmods now ;)
happy OCing to all u folks,
What bios you use?
Whaaaaaaaaa :slobber: Holy shh! My RAM wont do that! :D Ik can do 260MHz pifast and ran 3D @ 255. Havent gone higher, but I can say it wont do much more. Maybe a few Mhz and thats it.Quote:
Originally posted by Lastviking
[IMG]link removed to save some page space[/IMG]
This was long time ago..And i don´t want to run prime @ higher vdimm than 3.3v+ . And i don´t wana higher my timings........So i give you only 3DMarks.. 24/7 use is one thing.. Highest on Orb is one thing"Maybe you think they run Orb speeds @ 24/7?!". So cold down plz i work 2 much so don´t hurry...I give you higer fsb+cpu speed in 3Dmark2001 when i have time....And highest memmory bench is one thing. I don´t OC becuse of high 24/7 speeds...
[IMG]link removed to save some page space[/IMG]
You are looking for high 24/7 speeds but i´m are looking for high fsb speeds in sisoftsandra..."I like mc you like cars", "I like Red you like Green"
:stick:
Insane speeds LV!! Excellent! :toast:
Lastviking, without mods (stock Vdimm & Vcore)... as much you can raise the FSB?.
Now can the trolls pipe down here!
Viking, thats a wicked overclock 268FSB in 2K1 is mint!
Do you have a compare for that as i'd be really interested to put mine side by side with it and see the difference.
Currently:
232 FSB & Cpu interface @1.65v
x 11, 2552 MHz @1.98v
CAS2.0, 2-2-11 @3.20v
9800 @438 / 384 (unmodded)
Win 2000, CAT 3.5 / DirectX8.1b
And 21,455. ;) (Click the sig)
3dmark and superpi do not require full prime95 stability. I've ran both 3dmark21 and superpi but prime95 errored out after a couple hours.Quote:
Originally posted by bachus_anonym
i believe we could discuss it for a long time...
every OCer knows that benchmarks are not all equal... some require almost full "prime95" stability (like 3DMarks, SuperPI, PiFast or AM3) and some can do with so-so stability (like Sandra).
Overly impressive :toast:
If you are going to compare this to a drag race, then maximum overclock wise, THG already won with that 5GHz overclock using liquid nitrogen. This is not impressive.Quote:
Is a drag race a benchmark?
To me, if that 2.55 is stable on air, that is very good, LastViking. But I don't see the point of claiming 2.8GHz when you can't do anything with it. That's like having a dragster that explodes at the end of the race! Sorry dude, but what's the point of that?
Anyway, already seen someone post 2.8 on air, run 2.75 3DMarks & run it stable @ 2.7. Now that's impressive.
http://service.futuremark.com/compare?2k1=7536588
word!
It's not impressive when someone is finally getting the knack of putting an almost ordinary nForce board up near the 300 FSB mark and folks want to jump in and crap on the thread.
How many of you putting in your 2 cents worth on the merits of Lastviking's O/C are any where near 300 FSB on YOUR nForce board?
This isn't discussion any more, it's thread crapping, pure and simple. Trying to spice up the crapping with some recommends as to what would make the accomplishment "worthy" in your eyes doesn't matter. Perfumed crap is still crap.
xtremesystems is about respect for each other, not some kind of testosterone contest. Go to [S] if that's your thang.
Excellent m8!, Xtreme Systems is about showing what you can do/have done with what you have. No one should be here to say 'oh you did that but it doesn't mean anything cause I don't like it'. Remember if your not posting something productive to the person posting in regaurds to helping/guiding/commending them, then you shouldn't be posting at all.Quote:
Originally posted by sjohnson
It's not impressive when someone is finally getting the knack of putting an almost ordinary nForce board up near the 300 FSB mark and folks want to jump in and crap on the thread.
How many of you putting in your 2 cents worth on the merits of Lastviking's O/C are any where near 300 FSB on YOUR nForce board?
This isn't discussion any more, it's thread crapping, pure and simple. Trying to spice up the crapping with some recommends as to what would make the accomplishment "worthy" in your eyes doesn't matter. Perfumed crap is still crap.
xtremesystems is about respect for each other, not some kind of testosterone contest. Go to [S] if that's your thang.
LostViking was one of the first people to popularize the DFI NForceII boards thru his work, so trying to decredit his work is not acceptable to him or to this community as a whole.
If you came to this thread simply looking to troll then you should be banned, I'm not saying that you did or didn't come to do this but simply if you did you should be banned on the spot. It is simply not acceptable. When you come to this website, you notice at the end of the url that its a .org website. Meaning this is an organization, in all its simplicity Xtreme Systems is here for the purpose of helping fellow overclockers and modders. This Community is here to help one another in attaining their/our goals, do not try to detest them because you think this or that, try to help them or guide them but do not try to belittle them for something they work hard at doing.
Lets just end this here and now because people do not come here to post looking to get flamed or assaulted, lets be mature and think before we post.
That is all :toast:
Amen.Quote:
Originally posted by sjohnson
It's not impressive when someone is finally getting the knack of putting an almost ordinary nForce board up near the 300 FSB mark and folks want to jump in and crap on the thread.
How many of you putting in your 2 cents worth on the merits of Lastviking's O/C are any where near 300 FSB on YOUR nForce board?
This isn't discussion any more, it's thread crapping, pure and simple. Trying to spice up the crapping with some recommends as to what would make the accomplishment "worthy" in your eyes doesn't matter. Perfumed crap is still crap.
xtremesystems is about respect for each other, not some kind of testosterone contest. Go to [S] if that's your thang.
Well said guys,
In total agreement
:rocker:
nice one schroet
u hit the nail on the head
Agree, well said schroet :thumbsup:
Totally agree. But what's the point of posting results like this, if you're only goal is to get the highest on some benchmark? An unstable system that can't do anything else isn't proving anything.Quote:
xtremesystems is about respect for each other, not some kind of testosterone contest.
I just think that people should not immediately jump to encourage people to post false results. If you want to talk about community, you are helping to build false expectations for alot of beginner overclockers. That's not helping anyone else in the community.
Remember, criticism can be important too... My point was that posting results on an unstable system was not serving the community.Quote:
...if your not posting something productive to the person posting in regaurds to helping/guiding/commending them, then you shouldn't be posting at all.
I wish I had good enough RAM for this kinda of xtreme overclocking...i tried with my 3200 and got it to post at 2900+ and bench at 2800+. I stuck the whole rig out the window when it was -31F ( yes that is a F for farenheit!) Tommorrow night gonna be -27F but I am working on a chiller and bad ram...so dang i wish i could get involved :(
@wicked:
the point of this is to share experience with others. he was able to get a screenshot at that speed. congrats to him, thats a major feet. i managed a screenshot at 275, congrats for me. ok, now we talk about how it was done and help others try to achieve the same. weather its stable means nothing, he never claimed it was stable! if he had said 2.8gig STABLE, then some comments could be made, but as it is, he is making WR fsb runs here and your bad mouthing. thats poor "sportsmanship" in your part. he has a worldrecord, and hes showing it to us and sharing how he did it, thats why were all here, to learn, not bicker about stability.
nice overclock lastviking. the most i can do stable on my board is 2.766ghz but im at no where near the fsb you are mines 221x12.5 i can run 255fsbx10 but havent tried to get back 2.7 at 255 fsb might try that this week. im also in phase change not air.what bios are you using? and is this with cpc enabled?
How about me sayingQuote:
Originally posted by WiCKeD
Totally agree. But what's the point of posting results like this, if you're only goal is to get the highest on some benchmark? An unstable system that can't do anything else isn't proving anything.
I just think that people should not immediately jump to encourage people to post false results. If you want to talk about community, you are helping to build false expectations for alot of beginner overclockers. That's not helping anyone else in the community.
Remember, criticism can be important too... My point was that posting results on an unstable system was not serving the community.
"Your 3D Mark scores are worth crap"
....How would that feel?
exactly, when someone puts time and effort into producing something and someone comes in (unwanted i might add) and craps on it's not exactly sportsman is it?
He managed to get it to bench sandra it needs a degree of stability to do that alone, i'm not saying its stable but will your system boot at that speed no. Its great achievement imo, maybe not in yours but if you think like that keep it to yourself, your contibution isn't required. Your not criticising, your trolling. It is serving the community but not in a way you believe to be "valid". I see it as a look at the highest bandwidth ive ever seen on an nforce2 board and so do many others.
Next time you feel the need to crap on people, bite your tongue
:mad:
PS. I was joking about the 3D Mark thing, was just to make you realise how your being. You probably don't care anyway but again its a joke, i didn't mean it anyother way ;)
In this case, it proves that >250 FSB is a distinct possibility for a non-beginner. That's a start toward revival of the nForce to compete with A64 and Intel once again.Quote:
Originally posted by WiCKeD
Totally agree. But what's the point of posting results like this, if you're only goal is to get the highest on some benchmark? An unstable system that can't do anything else isn't proving anything.
Nothing rings false about Lastviking's accomplishment. Will you also criticize the number one spot holders in 3dmark because their system is almost certainly good for that one #1 run in 3dmark and unstable for most anything else?Quote:
I just think that people should not immediately jump to encourage people to post false results. If you want to talk about community, you are helping to build false expectations for alot of beginner overclockers. That's not helping anyone else in the community.
What community? The beginner community?Quote:
Remember, criticism can be important too... My point was that posting results on an unstable system was not serving the community.
If we're talking about beginners, they are welcome to start threads with their questions. Many of us will take time to help them shed their newness. Lastviking's accomplishment sets the bar but it's not uncommon for a stock DFI to reach and exceed 250FSB so they aren't being done any disservice by seeing what the few can do with this board.
If we're not talking about beginners, what's the point? This community is concerned with the (e)xtreme. Lastviking's accomplishment epitomizes extreme in the same manner as a pifast record or a 3dmark record. It sets the bar.
Ok folks, each has made their point. Now drop it. Not everyone will agree. As said earlier,
I dont want to have to lock the thread due to a few folks pushing flaming here. Ask your question, dont assume, assuming makes an azz outta u and me ;)Quote:
Originally posted by BMORIN
Rather than diss him for not putting up stable screenies, just ASK him what he's able to do 24/7 stable. Benchmarking is not about 24/7 stability, it's about being stable enough to finish the test.
If you're wanting a Prime screenie, just ask, I'm sure he'd put that up when he has time to find what's stable.
Ah yea, one more thing, to the person who reported a post within, I did receive, and am watching the thread. The help is appreciated. ;)
as a person that pretty much started all this and also on behalf of Sai, if i can, i say we're done on the subject...period!
good i'll drink to that :toast:Quote:
Originally posted by bachus_anonym
as a person that pretty much started all this and also on behalf of Sai, if i can, i say we're done on the subject...period!
On with the quest for more FSB :D :banana:
Awwhh come on guys, stop arguing!
http://www.storainternet.com/rage/pics/arguing.jpg
Man. Thats a bit harsh, but i see your point.
Thanks gentlemen! :toast: Now, let's get back to benching :)
forget benching.. i wanan see a max fsb screenshot!!!
i was trying to do a similar feet.. but i fell short.... twice.. sooooo im just gunna stabalize my system and move on.. maybe get phase change.
:D lol :D me too!
Read the post above yours and the one above that and you'll see it stopped before you posted.Quote:
Originally posted by Clew
Awwhh come on guys, stop arguing!
http://www.storainternet.com/rage/pics/arguing.jpg
Just a lame attempt to post a daft pic methinks :D
So...
http://ricjax99.50megs.com/forumpics/PRYORSTFU.jpg
SLK-900U and dual 35cfm 60mm fans should keep your temps down.
Hey Lastviking, you liar ;) :D
Do confess, your room was a block of ice and you - frozen like an ice age man - waited for your system to finally defrost you... :D
The nice effect was to clock it like mad but you were more happy about being able to move again ;) And to get the windows closed, hehe...
:toast: Amazing results, must be an extraordinary cpu/and also ram+board there :)
But for stability I doubt it can be 100% stable... this board is the bottleneck since it blocked my oc because of high fsb/VCore :(
But the effort counts and the results are overwhelming.
Well done :thumbsup:
P.S. I cannot see the first pic with your results. Bad link?
SAE i think my board geting stronger with more modds :). Now i cane run 3Dmark2001 @ 268Fsb+(Win2k) with passive cooling @Nb and Sb and no fan over memmorys"Room temp"20-25c. Before the new modd it only did 259fsb(Win2k) in room temp with active cooling @ Nb Sb and memmorys. But one thing sucks the out temp is only +5 now....:/ before -11-> so i cant test high fsb tests..
:stick:
Hey. That's great results. But do you think it's all due to the low temps or the stronger modding? :)
I hope you can tell me what you modded in what way on your board... can PM me as well ;) What's the new exciting mod??? :D
As I mentioned before I unfortunately have to wait for my replacement LP B for the dead infinity :( I would be very very glad to see it here on my desk within 1 week... but it depends on dfi's rma - speed... :rolleyes: I think there's only sth wrong with bios hardware but I am fed up now with those failing infinities :mad: I want a LP B too ;)
Re: -=2800Mhz"10x280Fsb"=-=NF2=-=Aircoled=-
:slobber: :up: :sofa: :worship:
i think with an higher vdd you can get 290
on my infinity :
vdd 1.8=255 screen
vdd 1.9 268 screen
if we can take the vdd regul to set 2v :) :p
Higher VDD will do it for my lanparty too. Not saying that the memory is fully stable but the board/chipset is definetly holding back at high FSB.
Anyway if anyone's interested my lanparty board can do about 265MHz prime stable. Had it up and running at 278 doing light benches yesterday. That was with watercooling and pretty low cpu clock (<2,5GHz) dunno if it can do the same with the prommy and 2,7Ghz<.
Still got the original coolers on both south and north bridge. Added some sinks to the mosfets though. One low rpm 120mm fan cooling the whole thing. Some better cooling on the nb and I'm sure it would do better. Not that it mathers much tho since my mem cant do any real benches at such crazy speed. Sandra and such will probably run.
When it comes to Vcore my board can do about 2,08V with 100% stability. Will boot all the way up to 2,2 (never tried any higher) and do light benches. Anything real and it craps out sooner rather than later... either locks up or reboots. Holds back my barton some 50MHz or so Im afraid. That kinda sucks.
Also I tried the Vdd mod. That however did'nt work. The mod itself seems to work but the board somehow regulates down the voltage. Got it to overvolt with some 0.1V but then the board wouldnt post, and as soon as I raised the omage even so little the Vdd dropped to the point where it was before the mod and the board functioned again. Have to look into that later I guess.
Still this is without any doubt the best nf2 based board I have ever seen. Im sure the vdd issue can be resolved.. the vcore thing is a bigger problem.
Nice fsb Hognert :thumbsup: What dimm voltage???Quote:
Originally posted by Hognert
Anyway if anyone's interested my lanparty board can do about 265MHz prime stable. Had it up and running at 278 doing light benches yesterday. That was with watercooling and pretty low cpu clock (<2,5GHz) dunno if it can do the same with the prommy and 2,7Ghz<.
[...]Still this is without any doubt the best nf2 based board I have ever seen. Im sure the vdd issue can be resolved.. the vcore thing is a bigger problem.
The vdd thing is what I was telling you all from the start ;)... there could be more stability with added vdd since the chipset causes the errors with high fsb and high vcore.
The vcore probs are due to the unsufficient voltage regulation :(
I'm using some 3.65V or so. Tried some 3dm just now and it ran fine up to 272MHz FSB with tightest settings. On a low end card tho (gf2mx) so Im not sure it can do it with a fast card. Frankly I doubt it can ;).
http://home.no/deadeye/272-3dm.jpg
Hognert you got a killer board there :)
What are your
+12@?
+5@?
+3.3@?
And Taiwan or china board.
http://upl.mine.nu/uplfolders/upload9/2703dmark.jpg
Only a fast test. Need more time to tweak and connect the modds again.
Ps...I have tested the vdd modd and it works fine..but i´m have only using it with high fsb tests. No 3Dmark
Nice stuff Lastviking :). My 12 and 5v are pretty much dead on.. the board shows the 12 as 11.8V or something during full load. My 3.3 is at 3.7V or so I believe. You think higher rails would make a difference?
Gonna check out that VDD again right now :), need to get that one working.
Also I see from your screen that there's clockgen for nforce2 now ;). I had no idea. Need to get that one. Handy thing.
I couldnt see your 3dmark score in that pic hognert :(
[edit] found it, nice score for that card
as long as your psu is within the 5% tolerance you should be fine, but if you want to run vdimm that high just run it from the 5v line (im not sure but do the infinity nf2 boards come with that stock?)
nice FSB there lastviking, how does it feel to be up with the p4's? Also, what card are you using (9800p?), I havent read the whole thread yet, but im going to
:toast:
Quote:
Originally posted by Hognert
Nice stuff Lastviking :). My 12 and 5v are pretty much dead on.. the board shows the 12 as 11.8V or something during full load. My 3.3 is at 3.7V or so I believe. You think higher rails would make a difference?
Gonna check out that VDD again right now :), need to get that one working.
Also I see from your screen that there's clockgen for nforce2 now ;). I had no idea. Need to get that one. Handy thing.
I don´t know if high rails make difference but i could´t belive you got so high without many modds..I think my boards sucks..it´s have i big problem in WinXp over 218fsb.... and i don´t get any higher with higher vdd(tryed 2.033) but i didn´t gain any in 3Dmark2001...My board have some heat problem i think..but i don´t know where....If you need help with VDD PM me or use icq i have added you.
LastViking,
what country is your board made in?
btw, nice FSB you got going there.
You seem to do outstanding job in FSB oc'ing the board but what about the video card. You got R9800pro, right? Why don't ya supercool your card too. I think you have a lot of potential.