Currently looking for best quad channel memory kit for x79 in range from 2400 to 3000Mhz sticks
Got ?400 to spend on some stick. Any suggestion?
Printable View
Currently looking for best quad channel memory kit for x79 in range from 2400 to 3000Mhz sticks
Got ?400 to spend on some stick. Any suggestion?
2400 is about the most you're going to get out of Sandy Bridge-E, so go for one of the 2400 C9 kits.
Some examples of those 2400 C9 quad kits:
CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2400 Desktop Memory Model CMZ16GX3M4A2400C9
http://www.newegg.com/Product/Produc...82E16820233348
CORSAIR Dominator Platinum 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2400 Desktop Memory Model CMD16GX3M4A2400C9
http://www.newegg.com/Product/Produc...82E16820233307
G.SKILL Trident X Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model F3-2400C9Q-16GTXD
http://www.newegg.com/Product/Produc...82E16820231639
Looks like Corsair Dominator Platinum 2400 Set cas 9. Or would I be best getting the 2800 kit ready for ivy bridge-E.
the 2800c11 kit will be Hynix CFR, the 2400c9 will be a different IC (Samsung maybe?)Quote:
Originally Posted by bro20000
2400 c9 are indeed Samsung, on all the kits posted above by Refa madness, the Corsair I had or saw so far HCH9, the TridentX HYKO. All should give you enough reserve to run at least 2600 Cas 10, normally a bit more, on acceptable voltages.
Are the hynix cfr kits anygood?Quote:
Originally Posted by l0ud_sil3nc3
Yes, the Hynix based stuff is good, but it is more for high clocks at looser timings than the Samsung based ram.
Thing is that on the X79 you aren't going to need DDR3-2800 clocks, so the 2400 C9 Samsung would be a better match for your current parts. I wouldn't recommend trying to match ram for your next rig just yet. You can always upgrade ram, if you think you need to, whenever you upgrade the rest of your components.
Edit:
Really, more than anything else, it is probably still too early to know exactly what type of ram is going to work best with a still unreleased platform so to try and buy ram today for a future upgrade is a bit of a crap shoot, in my opinion.
^simple have a sample of every ic:p:
Is it for a gaming setup or die hard benching ? If it's the first don't waste your cash on a 2400C9 kit :p as it will hardly enhance your game experieince
It could well be your CPU's IMC can't even handle 2400c9 for 24/7...
With Haswell around the corner, people are expecting +3000MHz daily speeds. I would buy a 2133C9 or a quad channel 2400C10 kit... no need to cash out, unless you really feel the need too...
Il just get the cl9 corsair platinum kit quad channel my imc on my 3930k is quite strong had it to 2600/2800 speeds. Just looking to upgrade from 4gb to 16gb with high bandwidth and tight timing.
2800Mhz IMC really... golden CPU then.. any screamshots ?
No screenshots I had to put the vtt voltage at high level and was advised to turn them down. Left everything on auto with rampage board put was recording 1.3v voltage didn't want to damage this chip. Didn't do any benchmarks. Didn't know 2400 was the limit with these chips.
Seriously it's 3930K?Quote:
Originally Posted by bro20000
I thought 3930K's IMC is capped at 2400MHz only.
The only SB-E chip which I have ever seen is 3820, 2600MHz doable clocked by Dumo:
http://img37.imageshack.us/img37/5678/744751.jpg
http://www.techpowerup.com/forums/sh...&postcount=551
my 3960X could run 2500 c7 no problem, never really tested 2600+ back then.
edit: http://www.hwbot.org/submission/2233...sdram_1320_mhz
I stand corrected, this was with PSC as well.
3000 daily for haswell?Surely with other memories,current chips can't handle that....
be prepared for cas 13/14 3000+ kitsQuote:
Originally Posted by Alex-Ro
The vccsa was at 1.325v found out that was to high. Currently clocking my G.skills at 2240 6-10-7-24 1T back down to 1.050v Vccsa.
That's DDR4 ranageQuote:
Originally Posted by l0ud_sil3nc3
Nope it is not only DDR4 range...
FYI insiders tell some manufacturers have 3333Mhz in the pipeline...
We will have to see Alex how the current ICs do with Haswell's IMC... it will be a new adventure and that's always big fun !
We've had 3930Ks over 2400Mhz too for benching purposes, daily stability that's something else. However 2800 that must be a golden one... or not :p
Do you think Haswell will be faster than SandyBridge-E with them mem clocks?
SB-E is only good for crunching with more then 8 cores or for 3D rendering purposes. For daily usage/gaming Ivy already kicks SB-E's butt with single/dual GPU setups... I honestly have got no clue why people even consider buying X79 for a daily setup... let alone a gaming rig...
Interesting,i can imagine 3333 kits costing a boatload of money.And of course with C13/14 :(Quote:
Originally Posted by Leeghoofd
Well, I must admit...I pretty much do...multiple samples, actually. :)Quote:
Originally Posted by l0ud_sil3nc3
You mean Reefa's infamous memory singularity (Black Hole) located in St. Johns FL. ;)Quote:
Originally Posted by Reefa_Madness
Singularity is a fancy term for an addiction...gonna have to use that term to describe my drawer then. "It's not my fault, there's a ram singularity in there!"
Quote:
Originally Posted by Alex-Ro
New IC technology will hopefully allow for some nice priced low voltage 2400mhz CL9 1.35v or 1.5v kits.