Gskill TridentX F3-2800C11Q-16GTXD

Printable View

Show 100 post(s) from this thread on one page

05-06-2012, 09:19 PM
Dumo

Gskill TridentX F3-2800C11Q-16GTXD

Quad DDR3 2800 kit test on Asus P8Z77-Deluxe and M5G

http://img221.imageshack.us/img221/9...1205050240.jpg

http://img840.imageshack.us/img840/3...1204121324.jpg

http://img692.imageshack.us/img692/7...1205050246.jpg
05-06-2012, 09:26 PM
Dumo

2842 4x4 1.65V

cpu air

http://img9.imageshack.us/img9/3185/44470134.png

2X4 cpu on cold

http://img577.imageshack.us/img577/2...enshot219w.jpg

http://img13.imageshack.us/img13/565/screenshot233t.jpg
05-06-2012, 09:26 PM
AVulgarPicture

want.
05-06-2012, 09:39 PM
plane501

can you run 4Gx4 2800 c10 1T ???:confused:
05-07-2012, 12:19 AM
thebanik

Wow!!!!!! what will be the pricing of these????? And judging by CPU volts, cpu on SS???
05-07-2012, 12:51 AM
theix

Thought it'd be Samsung but somehow it's Hynix.
07-21-2012, 05:02 PM
Dumo

Early GZHD and current GTXD batches

http://img151.imageshack.us/img151/6...enshot004p.png
07-23-2012, 05:06 PM
andressergio

Quote:

Originally Posted by Dumo

2842 4x4 1.65V

cpu air

http://img9.imageshack.us/img9/3185/44470134.png

2X4 cpu on cold

http://img577.imageshack.us/img577/2...enshot219w.jpg

http://img13.imageshack.us/img13/565/screenshot233t.jpg

such amazing kits my friend !!!
07-23-2012, 07:31 PM
Dumo

Thanks Sergio:up:

New batch on M5E

http://img521.imageshack.us/img521/7...nshot011lp.png
07-23-2012, 07:37 PM
andressergio

Quote:

Originally Posted by Dumo

Thanks Sergio:up:

New batch on M5E

http://img521.imageshack.us/img521/7...nshot011lp.png

veeeeery niceeee :clap:
07-23-2012, 08:05 PM
Dumo

Tighten up a bit

http://img855.imageshack.us/img855/7...enshot012k.png
07-23-2012, 08:24 PM
andressergio

Quote:

Originally Posted by Dumo

Tighten up a bit

http://img855.imageshack.us/img855/7...enshot012k.png

wow CL10
07-25-2012, 01:31 PM
techguy2k5

Any chance you could run AIDA64 on these bad boys? I just ordered the 8GB kit and am hoping for some decent gains over my current Team 2133 CL9 8GB kit. Thanks!
07-25-2012, 02:28 PM
Shiranui Gen-An

I'm guessing G.Skill is saving all the remaining BFR for kits like these and substituting Samsung HCH9 or Hynix CFR wherever possible in lower speed modules.
07-25-2012, 03:35 PM
AVulgarPicture

certainally seems you're right, since the 2400 9-11-10 kits are gone.
07-25-2012, 11:59 PM
Leeghoofd

Which date on the Dimm Dumo ? My May kit was pretty average on OC potential with tight timings...
07-26-2012, 12:43 AM
Dumo

Quote:

Originally Posted by Leeghoofd

Which date on the Dimm Dumo ? My May kit was pretty average on OC potential with tight timings...

Its July batch Leeg

http://img338.imageshack.us/img338/8...nshot020gb.png

Like the old batch GZHD or any 2666, its hard to clock CL10. I did it with the help of TridentX 1.85V preset setting on MVE
07-27-2012, 06:35 PM
techguy2k5

I just got mine, can do 2666 CL10 @ 1.65V but no POST @ 2800, code 23 :( production code: 12281400110834

Testing for stability now, IBT Maximum isn't stable at these settings, can do standard runs though. Gotta start playing around with settings now...
07-27-2012, 07:20 PM
Dumo

Quote:

Originally Posted by techguy2k5

I just got mine, can do 2666 CL10 @ 1.65V but no POST @ 2800, code 23 ...

23 means cpu's imc can't scale to freq. Try 2700 with tighten up subs
07-28-2012, 03:52 AM
Shiranui Gen-An

Quote:

Originally Posted by Dumo

Its July batch Leeg

http://img338.imageshack.us/img338/8...nshot020gb.png

Like the old batch GZHD or any 2666, its hard to clock CL10. I did it with the help of TridentX 1.85V preset setting on MVE

HA, G.Skill gave up on those mystery serial numbers and went back to the original scheme!
07-29-2012, 06:57 PM
angkies

samsung or hynix ics, dumo?
07-29-2012, 08:27 PM
Dumo

I haven't opened it Angkies.
07-29-2012, 09:09 PM
AVulgarPicture

Quote:

Originally Posted by angkies

samsung or hynix ics, dumo?

maybe read the thread. the answer has been mentioned several times.
07-30-2012, 02:35 AM
Shiranui Gen-An

Quote:

Originally Posted by AVulgarPicture

maybe read the thread. the answer has been mentioned several times.

http://www.youtube.com/watch?v=89iqd4nQjVQ
07-31-2012, 06:59 AM
techguy2k5

Quote:

Originally Posted by Dumo

23 means cpu's imc can't scale to freq. Try 2700 with tighten up subs

Bummer :( I can't adjust BCLK on mine at all, even .5MHz causes the system not to POST. I've been playing around with it, testing 2.67 with tightened timings but it's not totally stable there either so I'm down to 2600 10-12-12-32 1T. Any suggestions on sub-timings to adjust?
08-02-2012, 09:32 AM
Don_Dan

Quote:

Originally Posted by Shiranui Gen-An

HA, G.Skill gave up on those mystery serial numbers and went back to the original scheme!

No, the old marking would be 0240, this one is 2400. ;)
08-06-2012, 08:12 AM
C-N

Anyone seen any of these 2800's in the wild yet? GSkill gave a set away in March but still I have not seen them available. I'm looking for an 8GB set if anyone knows where to get them.
08-06-2012, 08:45 AM
andressergio

Quote:

Originally Posted by C-N

Anyone seen any of these 2800's in the wild yet? GSkill gave a set away in March but still I have not seen them available. I'm looking for an 8GB set if anyone knows where to get them.

i have one but stucked on the mail office due to strike :(
08-06-2012, 09:06 AM
C-N

Where did u order them from?
08-06-2012, 09:49 AM
andressergio

Quote:

Originally Posted by C-N

Where did u order them from?

a good friend get them on the egg for me cauz im from South America, imagine to be on ma shoes i have that awesome kit stucked here on my country and due to a damn strike i cant pick up :(
08-06-2012, 10:13 AM
C-N

Nope no good man I'd track them down black up & go on a mission lol
08-06-2012, 10:14 AM
andressergio

Quote:

Originally Posted by C-N

Nope no good man I'd track them down black up & go on a mission lol

i will go like navy seals lol
08-22-2012, 07:01 PM
stasio

TridentX F3-2800C11D-8GTXD 2x4GB in stock !

http://www.newegg.com/Product/Produc...82E16820231597
08-23-2012, 01:08 AM
C-N

Hey Sergio...... did you get your kit? how does it run?

$600 for 8GB is too much money for me to abuse... guess I'll hold out a bit longer.
08-23-2012, 08:21 AM
PolRoger

Price has gone up... :shocked:
08-24-2012, 07:36 AM
stasio

Out of stock,lucky my friend owikh84 bought one (only) kit.
08-28-2012, 02:56 PM
andressergio

hey guys after a LOOOOOONG wait due to mail strike in my country i received the babies they booted like a charm

here my first super pi with high latency boundary im started to tweak little by little

http://i.imgur.com/IdLMG.png
08-28-2012, 03:37 PM
Leeghoofd

Crazy Sergio :)
08-28-2012, 04:38 PM
andressergio

Quote:

Originally Posted by Leeghoofd

Crazy Sergio :)

thanks buddy glad i bought it when they where cheaper lol
08-28-2012, 04:39 PM
andressergio

here another screen with lit tweaks still on 1,65v (it do passes hyper pi also) Latency Boundary is on 12 will start lowering

http://i.imgur.com/ptFLc.png

i like this screen better i luv the bandwith

http://i.imgur.com/IaSGZ.png

passed hyperpi 32

http://i.imgur.com/texBC.png

the look of the babies :)

http://i.imgur.com/daiTr.jpg
08-28-2012, 04:45 PM
Dumo

Awesome Sergio:up:

Try TridentX 1.85V cas10 2700 settings
08-28-2012, 05:18 PM
andressergio

Quote:

Originally Posted by Dumo

Awesome Sergio:up:

Try TridentX 1.85V cas10 2700 settings

Thanks friend i will !!!
08-28-2012, 06:13 PM
theix

Quote:

Originally Posted by andressergio

here another screen with lit tweaks still on 1,65v (it do passes hyper pi also) Latency Boundary is on 12 will start lowering

http://i.imgur.com/ptFLc.png

i like this screen better i luv the bandwith

http://i.imgur.com/IaSGZ.png

passed hyperpi 32

http://i.imgur.com/texBC.png

the look of the babies :)

http://i.imgur.com/daiTr.jpg

Hmm....2400. Hynix CFR PBC?
08-28-2012, 06:51 PM
andressergio

Quote:

Originally Posted by theix

Hmm....2400. Hynix CFR PBC?

sorry mate what does mean ?
08-28-2012, 10:59 PM
l0ud_sil3nc3

Quote:

Originally Posted by andressergio

sorry mate what does mean ?

He is referring to the types of dram ic's used in your kit Sergio.

Man that is a sweet looking kit, I wish I would have bought one when they were slightly reasonable ($289.99 per 8GB's), before the pillaging lol

What trips me out is that they still sold out in record time at $599.99 a pop.
08-29-2012, 01:34 AM
andressergio

Quote:

Originally Posted by l0ud_sil3nc3

He is referring to the types of dram ic's used in your kit Sergio.

Man that is a sweet looking kit, I wish I would have bought one when they were slightly reasonable ($289.99 per 8GB's), before the pillaging lol

What trips me out is that they still sold out in record time at $599.99 a pop.

thanks friend i was lucky gerting them for 289 and very happy as they do great for 24.7

i love the speed of this mem for 24/7 still at 1.65vdimm

http://i.imgur.com/CriVz.png
08-29-2012, 03:07 AM
Zeus

Sick rams Sergio! :up:

I'm waiting for my Trident-X 2600 C10 kit that should hopefully arrive today.
08-29-2012, 05:58 AM
andressergio

Quote:

Originally Posted by Zeus

Sick rams Sergio! :up:

I'm waiting for my Trident-X 2600 C10 kit that should hopefully arrive today.

Thanks buddy !!! good luck with yours !!!
08-29-2012, 01:35 PM
andressergio

shooting some MEMTEST windows with tighter timmings

http://i.imgur.com/wWP3v.jpg
08-29-2012, 02:55 PM
owikh84

Quote:

Originally Posted by andressergio

shooting some MEMTEST windows with tighter timmings

Looking good bro... pls try TridentX C10 1.85v profile.
I bought this kit from egg when it's expensive lol... $599.99
08-29-2012, 05:51 PM
andressergio

Quote:

Originally Posted by owikh84

Looking good bro... pls try TridentX C10 1.85v profile.
I bought this kit from egg when it's expensive lol... $599.99

yeah i payed 289 i dont think i gonna put 1,85 on them scares me

i luv this bandwith for 24/9

http://img225.imageshack.us/img225/7957/capturavgk.png

Uploaded with ImageShack.us
08-29-2012, 06:44 PM
PolRoger

"TridentX 1.85" Preset @ DDR3-2600 with 1.605v DRAM (My 3570K gives a "23" code at 2800).

@Sergio: You should try testing your kit at "TridentX 1.85" 2666 with less volts... I don't think my chip's IMC is strong enough.

http://i695.photobucket.com/albums/v...tDDR3-2600.png
08-29-2012, 06:51 PM
andressergio

Quote:

Originally Posted by PolRoger

"TridentX 1.85" Preset @ DDR3-2600 with 1.605v DRAM (My 3570K gives a "23" code at 2800).

@Sergio: You should try testing your kit at "TridentX 1.85" 2666 with less volts... I don't think my chip's IMC is strong enough.

http://i695.photobucket.com/albums/v...tDDR3-2600.png

Thanks bud will do !!!
08-30-2012, 07:16 AM
andressergio

a quick boot at 5GHz HT with 2933 CL11-13-13-35 1T ~ 1.725

keep in mind guys that i dont have a bench rig im a 24/7 guy so im using 2x SSD for OS and 2x HDD for storage and all installed wich loads a bunch of crap at start, very happy the IMC goes to this and also tried 3000 will post later cauz it BSOD lol

http://img822.imageshack.us/img822/1...kill280010.png

Uploaded with ImageShack.us
08-30-2012, 08:20 AM
owikh84

Quote:

Originally Posted by andressergio

a quick boot at 5GHz HT with 2933 CL11-13-13-35 1T ~ 1.725

keep in mind guys that i dont have a bench rig im a 24/7 guy so im using 2x SSD for OS and 2x HDD for storage and all installed wich loads a bunch of crap at start, very happy the IMC goes to this and also tried 3000 will post later cauz it BSOD lol

Good IMC. Hate to see 1.6GHz on CPU speed lol please turn off the speedstep craps
08-30-2012, 08:28 AM
andressergio

Quote:

Originally Posted by owikh84

Good IMC. Hate to see 1.6GHz on CPU speed lol please turn off the speedstep craps

Thanks !!!

haha i hate it too but its good for 24/7
08-30-2012, 02:55 PM
owikh84

Quote:

Originally Posted by andressergio

Thanks !!!

haha i hate it too but its good for 24/7

Nvm mate... Ehh your chip IMC is 3000 capable?
08-30-2012, 03:29 PM
andressergio

Quote:

Originally Posted by owikh84

Nvm mate... Ehh your chip IMC is 3000 capable?

yes i was lucky this time :)
08-30-2012, 04:32 PM
owikh84

Quote:

Originally Posted by andressergio

yes i was lucky this time :)

Good to hear that bro. Congrats!
08-30-2012, 04:56 PM
andressergio

Quote:

Originally Posted by owikh84

Good to hear that bro. Congrats!

thanks mate !!!
08-31-2012, 12:57 PM
Zeus

Mine are not the expensive 2800 C11 but the 2600 C10 version. Not that it makes them less impressive, look at this and see how tight the timings are:

http://i.imgur.com/mnRWx.png

Unfortunately the IMC doesn't like 1400MHz, i will put my second 3770K in soon and shoot for 2800. :)
08-31-2012, 01:23 PM
andressergio

Quote:

Originally Posted by Zeus

Mine are not the expensive 2800 C11 but the 2600 C10 version. Not that it makes them less impressive, look at this and see how tight the timings are:

http://i.imgur.com/mnRWx.png

Unfortunately the IMC doesn't like 1400MHz, i will put my second 3770K in soon and shoot for 2800. :)

that is very impresive Zeus

What im explaining to the guys here is that i only have 1 PC and thats my server for movies, music and gamming station, so i run the benches on it, so i can do the same as yours with my TeamX not at 1,65v but wont be stable for 24/7 operation u got me ? the most i got stable for gamming is 2600 CL10 or a bit more 2666, so i decided to go for certified 2800CL11 RAM and i was lucky to get them 289 dollars not like now that are very expensive and also very lucky with a 3000 IMC.

Good luck on your tests !!!
Cheers
Sergio
08-31-2012, 01:53 PM
Zeus

Thanks man. For me it's the same, one rig that i'm using for everything. I'm using memtest 86 a lot before booting into Windows, this has saved me a nightmare or two. Booting into Windows with unstable ram will corrupt your OS in the blink of an eye.

So far this ram seems rock solid at the settings i posted above. What hit me as a surprise was that it's able to run TRRSR at 4, which gives a very nice boost in bandwidth.
08-31-2012, 03:58 PM
PolRoger

Quote:

Originally Posted by Zeus

Mine are not the expensive 2800 C11 but the 2600 C10 version. Not that it makes them less impressive, look at this and see how tight the timings are:

Unfortunately the IMC doesn't like 1400MHz, i will put my second 3770K in soon and shoot for 2800. :)

Seems like your kit has some pretty good ic to me. :up: Double sided or single sided? Just think of the savings compared to a Corsair 2666 C10 kit. :) I wonder if your kit is rolling with Samsung or Hynix? It will also be interesting to see how it scales up to 2800...
08-31-2012, 04:46 PM
andressergio

Quote:

Originally Posted by Zeus

Thanks man. For me it's the same, one rig that i'm using for everything. I'm using memtest 86 a lot before booting into Windows, this has saved me a nightmare or two. Booting into Windows with unstable ram will corrupt your OS in the blink of an eye.

So far this ram seems rock solid at the settings i posted above. What hit me as a surprise was that it's able to run TRRSR at 4, which gives a very nice boost in bandwidth.

yes i should test with this new chip with strong IMC i have TRRSR 4 as with the other i couldnt not even at 2600

can u pass at least 100% windows memtest with those settings, not the boot one but the windows one ?
09-01-2012, 02:05 AM
Zeus

To be honest, i forgot to look if they're double or single sided. I immediately slotted them in and started testing.

From what i can see with the sticks in place i'd say double sided.

The serial has 1500 in it, assuming this is Samsung.

Gonna try HCI memtest tomorrow Sergio, will let you guys know.
09-01-2012, 02:29 AM
Viss

Got the same kit back from RMA the other day Eus, box says aug 2012 (serial start with 1234150) and they are better then the older kit i send in, 32M at 2800 10-12-12-31-1 with only 1.675v :)
09-01-2012, 08:15 AM
andressergio

Quote:

Originally Posted by Zeus

Gonna try HCI memtest tomorrow Sergio, will let you guys know.

no not that memtest on windows this one like i did its the worst one to pass lol

http://i.imgur.com/fbpLt.jpg

http://www.hcidesign.com/memtest/MemTest.zip
09-01-2012, 08:24 AM
tool_462

Quote:

Originally Posted by andressergio

yes i was lucky this time :)

I'll trade you my chip that can't do 2400 IMC, everyone knows lower is better on memory right!?
09-01-2012, 08:43 AM
andressergio

Quote:

Originally Posted by tool_462

I'll trade you my chip that can't do 2400 IMC, everyone knows lower is better on memory right!?

hahaha
09-01-2012, 09:32 AM
deachus

Sergio, that is HCI memtest for windows you are using. I use the same one.
09-01-2012, 10:44 AM
andressergio

Quote:

Originally Posted by deachus

Sergio, that is HCI memtest for windows you are using. I use the same one.

thanks mate yes its HCI but for windows

i went a bit further today they pass really good with tight subtimmings

http://i.imgur.com/xxpf5.jpg
09-01-2012, 12:04 PM
deachus

Nice!

Was able to pass 150% 2600mhz with my new batch TeamGroups with pretty tight timings but 1.675v. Will have those early batch TeamGroups Tuesday!

Sent from my Sprint HTC EVO 4G
09-01-2012, 12:50 PM
Zeus

Quote:

Originally Posted by Viss

Got the same kit back from RMA the other day Eus, box says aug 2012 (serial start with 1234150) and they are better then the older kit i send in, 32M at 2800 10-12-12-31-1 with only 1.675v :)

Nice Bart! Mine say July 2012 and also have 1500 in the serial. Unfortunately the chip i got from you doesn't seem to be stable at 1400MHz ram so i'm gonna have to try my other chip for that. ;)

Quote:

Originally Posted by andressergio

no not that memtest on windows this one like i did its the worst one to pass lol

Passed 125%, stopped it manually. As far as i'm concerned stable as a rock. :)

http://i.imgur.com/t37L5.png

Needed 1.66V but this is with TRRSR at 4 which is pretty tight in my book.

I think Gskill saved their very best Samsung chips for these 2600 sticks and their best Hynix for the 2800 sticks.
09-01-2012, 02:48 PM
Dumo

Enough for hcl, loc mem stability tests. Lol

With good imc this ram should be torture to what it capable of:D

http://img17.imageshack.us/img17/588...nshot136cs.jpg
09-01-2012, 03:42 PM
andressergio

Quote:

Originally Posted by Dumo

Enough for hcl, loc mem stability tests. Lol

With good imc this ram should be torture to what it capable of:D

http://img17.imageshack.us/img17/588...nshot136cs.jpg

hahahaha there comes mr crazy mem clocker lol

congrats thats awesome mate !!!
09-01-2012, 03:43 PM
andressergio

Quote:

Originally Posted by Zeus

Nice Bart! Mine say July 2012 and also have 1500 in the serial. Unfortunately the chip i got from you doesn't seem to be stable at 1400MHz ram so i'm gonna have to try my other chip for that. ;)

Passed 125%, stopped it manually. As far as i'm concerned stable as a rock. :)

http://i.imgur.com/t37L5.png

Needed 1.66V but this is with TRRSR at 4 which is pretty tight in my book.

I think Gskill saved their very best Samsung chips for these 2600 sticks and their best Hynix for the 2800 sticks.

Amazing !!!
09-01-2012, 03:50 PM
Dumo

The maker of this ram already done all the tests for us, thats why it stamped 2800. Lol
09-01-2012, 06:29 PM
PolRoger

Quote:

Originally Posted by Dumo

Enough for hcl, loc mem stability tests. Lol

With good imc this ram should be torture to what it capable of:D

http://img17.imageshack.us/img17/588...nshot136cs.jpg

Quote:

Originally Posted by Dumo

The maker of this ram already done all the tests for us, thats why it stamped 2800. Lol

I was under the impression that 3770K's were the ones with strong iMC but that is one impressive 3570K...
09-02-2012, 05:29 AM
deachus

Great job Dumo!!
09-03-2012, 07:02 AM
andressergio

latency boundary 5 so far i read here that affects secondary timmings but i shooted a SPI32 and scores almost same as LB 6

http://i.imgur.com/j2iFl.jpg
09-06-2012, 10:22 PM
andressergio

after having some troubles with bios i corrected and now here's a shot of 500% memtest at Latency Boundary 6 2800 CL11-13-13-35 1t@ 1.65

the thing was no matter the latency boundary i put it was not affecting third timmings as it should, now YES

http://i.imgur.com/N7rWU.jpg
09-07-2012, 12:08 AM
jimba86

:eek: thats crazy bro..sick score.
09-07-2012, 12:36 AM
Zeus

So what did you change bios for the third timings to change with Latency Boundary?
09-07-2012, 06:05 AM
andressergio

Quote:

Originally Posted by Zeus

So what did you change bios for the third timings to change with Latency Boundary?

Hey Zeus no the thing was that since i put this sticks i always have that score no matter what LB i put, i was having some lockups etc but memtest always passed, the after some 5 days PC wont turn on lighting the mem, so i pressed mem OK rest BIOS put all again and NOW the lower the latency bounday it really changes the third timmings and score, thTHAT WASNT working at all

i put this just in case others dont realize and its very important if you are learning third subs

will try LB = 5

Cheers to all !!!
Sergio
09-07-2012, 06:06 AM
andressergio

Quote:

Originally Posted by jimba86

:eek: thats crazy bro..sick score.

thanks mate !!!
09-07-2012, 06:32 PM
andressergio

tough its stable, i can pass memtest...i cant game at that settings i mean at LB = 6 now on LB = 8 yes---

i really dont know what settings to change if VCCSA or what---kinda lost
09-07-2012, 06:50 PM
owikh84

http://i458.photobucket.com/albums/q...Y/DSC_0345.jpg

Because my current chip's IMC is not good, tested 2600 10-12-12-28-1T @ 1.62v passed 32m
More results coming up later... later

http://i458.photobucket.com/albums/q...0010-12-12.jpg
09-07-2012, 07:11 PM
jimba86

nice results. are these available in AU yet? i cant find the 2600 sticks but not these ones.
09-08-2012, 08:01 AM
owikh84

Quote:

Originally Posted by jimba86

nice results. are these available in AU yet? i cant find the 2600 sticks but not these ones.

According to G.Skill HQ, the 2800 kit is not in MASS production yet. Newegg got this kit once in a while since it is a significant e-shopping site.
09-08-2012, 08:05 AM
C-N

The 4 sale section has a set for $500
09-08-2012, 01:41 PM
stasio

Newegg restock.....maybe only 1 or 2 kits.
http://www.newegg.com/Product/Produc...82E16820231597
09-08-2012, 05:05 PM
andressergio

Booting at 2933 CL11-14-14-35 1T and x49 no to give CPU too much volts as next step i did on AI SUITE increased BCLK till 102.5

pic of POST :)

http://i.imgur.com/OuWDD.jpg

and then mem

http://i.imgur.com/6Xr07.png

hope you like it :up:
09-08-2012, 06:12 PM
deachus

Nice Sergio! Any benching at those settings?
09-08-2012, 06:58 PM
andressergio

Quote:

Originally Posted by deachus

Nice Sergio! Any benching at those settings?

Thanks man !!!
im doing this with my RAID0 of SSD on my daily rig, i gonna get a small SSD to bench the mem so i dont ruin my install

cheers !
Sergio
09-08-2012, 07:12 PM
owikh84

nice IMC sergio, at reasonable volt...
09-08-2012, 07:32 PM
andressergio

Quote:

Originally Posted by owikh84

nice IMC sergio, at reasonable volt...

thanks owi !!!
09-08-2012, 10:49 PM
C-N

What owikh84 said ^^^^^ nice indeed :up:
09-09-2012, 03:08 AM
andressergio

Quote:

Originally Posted by C-N

What owikh84 said ^^^^^ nice indeed :up:

Thanks buddy !!!
09-10-2012, 02:42 PM
owikh84

2666 11-13-13 @ 1.61v
http://i458.photobucket.com/albums/q...6611-13-13.jpg

2700 11-13-13 @ 1.62v
http://i458.photobucket.com/albums/q...0011-13-13.jpg

2700 10-13-13 @ 1.71v
http://i458.photobucket.com/albums/q...0010-13-13.jpg

benchmark stopped here because my current chip's IMC is not that good (cap @ 2700)

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 06:16 AM.

XtremeSystems