Printable View
I have the chance to have sample of Asus GTX680 DirectCUII TOP :)
Thank you Guillaume from Asus France.
http://www.overclex.net/wp-content/u...DC2_photo1.jpg
http://www.overclex.net/wp-content/u...DC2_photo5.jpg
It's a very good graphic card with PCB from Asus !
First tests in aircooling with 1.175v (max GPU Tweak) :D
http://www.overclex.net/wp-content/u..._1350_3D11.jpg
http://www.overclex.net/wp-content/u..._3Dvantage.jpg
Max temperature during benchs : 48/49°C (ambiant 19.7°C)
Ok good start....now i will be the first to ask this of you.
Get two foot long wires put one on the vcore read point for your dmm, the other on the hotwire spot and test that hotwire mod option.
If like ref card -20ish set in bios will be around 1.28ish max voltage in 3d.
Then you get upgraded to my "internet hero" of the month
good luck and gods speed
Good luck ! :)
Thanks, I await information from Asus for the Hotwire.
looks nice piece of hardware :)
Can you post more pics without the cooler?
Very nice, so water cooling tests next?
:)
Yes, but I await news from ASUS TW for this resistor : http://vr-zone.com/articles/asus-gtx...w/15614-3.html
http://assets.vr-zone.net/15614/ocp1.jpg
it says remove? so - remove! aka desolder! :)
nice first score
Hotwire : ok :D
I await news from Asus tomorrow for resistor...
http://www.overclex.net/wp-content/u...2_hotwire1.jpg
http://www.overclex.net/wp-content/u...2_hotwire5.jpg
http://www.overclex.net/wp-content/u...2_hotwire7.jpg
http://www.overclex.net/wp-content/u...2_hotwire8.jpg
Nice :D
Are you now able to change voltage?
No but I have remove the resistor and now yes :DQuote:
Originally Posted by emertX
https://fbcdn-sphotos-a.akamaihd.net...22264144_n.jpg
In aircooling with 100% Fans :
Without Hotwire :
GPU : 1261MHz
MEM : 1800MHz
BOOST : 1325MHz
@1.175v
Tmax : 48°C
http://www.overclex.net/wp-content/u...B1325_3D11.jpg
With Hotwire and after remove PRG100 :
GPU : 1306MHz
MEM : 1800MHz
BOOST : 1370MHz
@1.175v +100Mv (OSD)
Tmax : 54°C
http://www.overclex.net/wp-content/u...B1370_3D11.jpg
Today, it's watercooling :D
Under watercooling :D
http://www.overclex.net/wp-content/u...DC2_water4.jpg
3DMark11 @GPU Boost 1435MHz / MEM 1800MHz
http://www.overclex.net/wp-content/u...B1435_3D11.jpg
3DMark11 @GPU Boost 1400MHz / MEM 1800MHz
http://www.overclex.net/wp-content/u...1400_3Dvan.jpg
Great ! ! ! !
unbelieavable! Thanks for sharing man!
So what did Asus say about it?Quote:
Hotwire : ok
I await news from Asus tomorrow for resistor...
Nice job mate, I wish these were in the stores now .
:)
:up:Good job waiting for ln2
First tests under LN2 but card coldboot/coldbug @-40°C :(
First results 3D11 : P12943 @Boost 1500MHz @-35°C with 1.34v
I make new tests tomorrow because Boost 1550MHz, all GPU tests is ok !
https://fbcdn-sphotos-a.akamaihd.net...36704423_n.jpg
Best but max Boost with GPU Tweak (1550). I hope news from Asus TW :rolleyes:
Under LN2 : -60°C with 1.4v
http://www.overclex.net/wp-content/u...B1550_3D11.jpg
How far can you go with the voltage via software, when you desolder the resistor?
Hey, what did Asus say about removing the resistor??Quote:
Originally Posted by aussie-revhead
:)
perfect score :D
no answerQuote:
Originally Posted by emertX
Sorry for late.Quote:
Originally Posted by emertX
Actually +222 (I think) and it's 1.45v max
I think if you remove resistor = no garantie :confused:
I hope make soon new bench witn new bios, I await news from Asus France.
great!
For flash GTX680. I use last NVFlash 5.118
But the command ? nvflash -b newbios.rom ???
For back up...
nvflash -b backup.rom
...and flashing
nvflash -4 -5 -6 name.rom
Thank you !Quote:
Originally Posted by cole2109
Possible to force flash ? it's seems to be same bios ? and problem with protect ?
I use nvflash 5.117.0.1 and the command : nvflash -4 - 5 -6 bios.rom
Have you an idea ?
http://www.overclex.net/wp-content/u...5/IMG_9245.jpg
nvflash --protectoffQuote:
Originally Posted by CornerJack
nvflash --eraseeeprom
nvflash -4 -5 -6 bios.rom
Which bios do you want to flash? Is it a special one?
Gesendet von meinem GT-I9100 mit Tapatalk 2