The X58A-OC is being shipped out to world markets today.
X58A-OC shipping in volume from GIGABYTE’s Nanping factory in Taiwan today
Printable View
The X58A-OC is being shipped out to world markets today.
X58A-OC shipping in volume from GIGABYTE’s Nanping factory in Taiwan today
Great, let's hope they have been worth the wait !!
AT LASSSSSSSST!!! :up: :up: :up:
Hoping for some new wprime 1024 std.
At the rumoured price point (250 euros) I could be tempted......:yepp:Quote:
Originally Posted by Leeghoofd
I wonder if the multi is unlocked.this is a 22nn part right?
anyone else sick of hearing about this board every 2 seconds ;)
Damn it!Quote:
"...should be available ... in the rest of the world over the next 2-3 weeks"
Wrong thread?Quote:
Originally Posted by Skratch
last 1366 board
What's so great about this X58 board compared to others?
I must have missed something...
in b4 $600 on newegg
Not much for me although I do like the colour scheme :D
I am not getting one for myself but I *do* happen to need 5 of them quite urgently to finish off customer builds ;)
GIGABYTE GA-X58A-OC is $379.99 @newegg
http://www.newegg.com/Product/Produc...82E16813128497
Almost $400.00 for a X58 Chipset Motherboard...Yikes! Why so expensive?
You can buy a dual socket server motherboard for less than a $100.00 more.
Thats just insane for a end user motherboard!
Yeah, I could of sworn this board was supposed to be retailing for around $250.
yea that was the initial price estimates, I think its priced as is because they want it to compete against the other boards in its class. The thing is to the general public, "if its priced to low something is wrong with it". That is why you have the G1 Assassin and the R3E BE priced so goddamn high. That and the fact that its run is small and delayed and that its target audience isn't only extreme ocers, hurt the price even more. But that is my speculation.
The essence of this board is that it's not meant for the general public.Quote:
Originally Posted by sin0822
I was looking to replace my X58-UD5, but not at this price. I will just wait to upgrade the whole thing.
Then it wouldn't have SATA6G, USB 3.0, or audio. lol Even the 4G button. They could have also left out the heatsink for the DrMOS and just gave us those early silver heatinks like you have. They could have also left out the LEDs in the heatsinks too.Quote:
Originally Posted by massman
The fact that those parts are in the board means that extreme ocers, even all ocers aren't the target market.
The thing is that as much as we might like to think that we(overclockers) are a large enough market segment we just are not. That is why other companies don't make products just aimed at OCers, its a great idea, and they did it correctly by leaving SATA6G USB 3.0 and Audio in so that normal users will buy the board as well, or those users who want to get into OCing, and to those users price of a product means a lot.
Even to me when i came back to OCing I wanted a great X58 board, and I overlooked any board under $250 because of the simple fact that under $250 is considered low end for X58. The price we pay is part of the product.
While this price is very high in my mind, for a board so late in the game, it still is more value in terms of hardware than the UD7 or UD5 has, the pure cost of the parts used on this board drive its price high.
This doesn't mean i approve of saying $280 and then 5 months later on release day charging more, it means i understand. Paying that much for an X58 board at this time is not something I am going to enjoy doing, it is something I am going to do nevertheless as overclocking isn't a cheap sport to begin with.
Yes i do dislike the price but i still do enjoy the product.
If they wanted to just target extreme ocers then they could make 500 boards and sell 90%. Although we might be a much larger community you still gotta factor in the fact that this board is late in the game and that not everyone will buy a new board at this time, and a gigabyte board at that as brand loyalty is still in play. There are people who will buy an R3E BE for almost double its price to clock a gulftown. '
This board can do 250blck with slow mode pretty easily.
Yeah, and they dedicated an entire microsite to prove how much general audience they want to target: http://www.gigabyte.com/MicroSite/265/x58a-oc.html. I mean, it's literally there: "The GIGABYTE X58A-OC is the world’s first motherboard designed specifically for overclocking."
Don't start playing a ton of BS cards now that turns out it's more expensive than we all anticipated. It just is. Why? Dino said this: "It was planned to be released even cheaper but some delays and changes have increased the cost of production unfortunately." Perhaps it's like you say and the sales people were too afraid. All I read on (different) hardware forums is that non-overclocking people simply digg the colors and would consider buying the board at a lower price point. And for fcks sake, no the general audience will not buy this board for stereo audio, a sata 6g port and a few usb holes.
Does this change everything that has been written about this board, as a concept or as a product? No. Each and everyone of us knew that a project like this comes at a (metaphorical) cost. After all, this type of board is something sales people do not see everyday. Compromises have to be made. It's upto each and every individual to decide whether the compromise is still worth the purchase. Are you horrified, but still want to 'support' this particular type of product, chances are great it'll be a painful-akward moment when you take out your credit card.
We can discuss this at length over and over again, but it won't change the facts. A solid, stable board with high-end pwm, feature-poor and at an interesting price point ... that's what not only overclockers, but plenty of enthusiasts want (yes, perhaps even need). Just like with many of my childhood paintworks, the theory was very good but the excecution could have been a bit better. Doesn't mean you have to throw away the theory, just means you have to learn now and improve next time. Lesson in this case being: don't create delays, don't make it a tad too expensive.
not just for overclocking.. every motherboard should be made fully poscaped :up:
just got mine earlier today.. whatta beauty..
oh and thanks for the 470uf capacitance much appreciated
:toast:
http://img843.imageshack.us/img843/6708/49879457.jpg
You don't get marketing do you? its all about selling the product, giving a board like this made for overclockers really will sell it to non overclockers... SATA6G and USB 3.0 are MUST haves when selling an X58 board for this price.Quote:
Originally Posted by massman
I am not defending anything and I haven't changed my story at all, I always knew this board would end up costing more, and i haven't refereed to it as otherwise. $380 isn't that much compared to $450 rumors on HWbot, maybe $100 more than planned, but compared to other boards like the UD9 and R3EBE and Bigbung its well priced. IMO they priced it to compete at the retail level. I don't like it but that is how it goes and that is what I am trying to say. $280 was a great rpice for this board, but that is my take on why they priced it the same as other boards of its class.
And yea SATA6G will sell this board to a few ppl, you have no idea how many want RAID 0 for SATA6G SSDs, and FYI marvell SE9182 can do it and pretty damn good, rather than Marvell SE9128. I am on many forums everyday, this being one of the more extreme, and I saw many buy the G1 series for the SATA6G IC. You can never predict why someone will buy a board.
not everyone has to agree with you either.
wack a z68 on it plz. for modern systems!
Z68 ? We can already max out the current cpus on boards we need x79 with cpus that/ can oc like x58 and with better CBS I hope this board sells well se we see z68x-ox or x79a-oc!
Steven, looking at the price, why not opt straight opt for a G1 Sniper, UD7 or RE3 ? A daily user will at least want more USB ports...better onboard audio. It's too bad but I see this great initiative turn a bit on itself (with the delayed release date)... I hope the sales are still decent, but the marketing guys are cutting their own wrists now with trying it to sell at the new price...
If the price was lower, users could add their own preferred audiocard and still enjoy the ultra high selected components... now more chance they might turn to another product in the lineup... we will see in the near future how sales go...
Maybe if Dino adds some nudeness on the backside of the box that it will boost sales...
haha its steven, and ill think about it. i see your points and they are valid. I do agree that the price is too high.
:rocker::rocker::rocker::rocker::rocker::rocker::r ocker::rocker::DQuote:
Originally Posted by NapalmV5
Nicest compliment anyone has ever given me. Well, yes, perhaps I don't get marketing.Quote:
Originally Posted by sin0822
What I more or less do get is how sometimes people bend their mind so they can fit the situation. In your case, suddenly making things like 2x USB3, SATA6 and stereo audio much more important to almost justify selling at a higher price point. Just a few quotes. From you.
- "Like no other motherboard its sole purpose is to fulfill the needs of overclockers, and overclockers only"
- "but it is the first motherboard to be targeted solely at overclockers, and extreme overclockers at that"
- "With this board you don’t pay a premium for ICs(chips) you will never use (extra USB, dual NIC, eSATA, IEEE, or even 6 channel audio)"
- "The way GIGABYTE has focused in on different market segments is impressive to say the least"
- "A board made just for one purpose, and one purpose only, OVERCLOCKING!"
- "honestly, they did a terrific job at GIGABYTE, and times like these makes me want to try and get a job at a company so smart!"
- "Above all else this board is built for extreme overclocking"
- "the G1.Assassin for gaming and the X58A-OC for overclocking"
- "It is true that other boards can probably facilitate (close) to the same overclock, but it’s cool to have a product only made to facilitate it, and facilitate it well."
- ""Our community is small and its hard to sell a product to a very small niche, especially with all the competition"
And so on ...
Sources:
http://www.xtremesystems.org/forums/...d.php?t=269492
http://www.xtremesystems.org/forums/...d.php?t=270466
http://www.xtremesystems.org/forums/...d.php?t=269897
Just to say: theory of the board is very good, the execution could've been better.
Marketing is like women... always unpredictable...
your analogy is riske` lol
lol i am not even going to say anything, but i do appreciate being quoted :)
Received my board a few days early from Newegg. Who the hell taught them how to pack? They threw it in a big box with only paper as padding. The main mobo box looked ok until I opened it and noticed a huge dent on the interior box lid that covers the actual board. The box must have been dropped from pretty good distance for the heat sink to leave such dent in the box lid. Hell there is even a tear in the anti static bag that lines up with the dent. :eek: Will call Newegg tomorrow.
I thought it was already out?
Sandybridge-E boards will be at computex and I suspect samples being sent out within a couple of weeks, so... damn... bad timing really... unless Sb-E doesn't really perform...
EDIT;
From the discussion... I actually think Massman' avatar matches his expression during the argue.
And they are already on ebay ;)Quote:
Originally Posted by saaya
Out to the rest of the world, not to the neighbors of Taiwan...
you've yet to learn the drill of XS...Quote:
Originally Posted by maxxx
USA IS THE WORLD :ROTF:
talking out of ur ass again Marc
Hahaha, yeah.. it is a lesson that was hard to learn specially being half the world away... :ROTF:Quote:
Originally Posted by M.Beier
If it is any comfort, first shipment of 4 motherboards (might be more and some has been booked already) is estimated to arrive in Denmark on 20th May, at the main store.Quote:
Originally Posted by maxxx
I think there is 0 press samples in Denmark, so nah, you are not alone.
Yea, I best keep quiet, last time you wrote that I tried making a "I told you" back at you, but.... That was about the X58A-OC being targeted between UD5 and UD7 as for price - so eventually you were right :rofl:Quote:
Originally Posted by dinos22
EDIT;
But actually according to Tim's post on the blog, 2-3 weeks, 2 weeks from 5th is 19th, 3 weeks is 26th, so.... 19-26th, Tim isnt telling shift, but the pure facts... Just some people here that think because it has arrived some places ahead of the estimate - that it is widely available in the stores, which is not exactly the case.
If you need further assistance with claims, dont ask me, my PM box only has 1 PM left :p:
No worries. It will arrive one day (or someday).. :DQuote:
If it is any comfort, first shipment of 4 motherboards (might be more and some has been booked already) is estimated to arrive in Denmark on 20th May, at the main store.
I think there is 0 press samples in Denmark, so nah, you are not alone
Puppetry of the rectal muscle coming to a theater soon :D On the 21st we have launch in Belgium... but I don't think etailers will stock these in masses... most online shops have them listed as " wil be specially ordered for you"Quote:
Originally Posted by dinos22
You have PM Dino concerning one of your producsts :)
I am waiting for it to hit the shelves at my microcenter in US, by then it should hit major euro retailers.
I love the new POSCAP capacitors...make this board look VERY clean. I hope other motherboard makers adopt them as well.
Piece of shoite caps? 0_o
interesting marketing name eheheheh :D
hahahahah :rofl:Quote:
Originally Posted by saaya
http://www.plaisio.gr/Computers/Hard...igabyte&page=2 328€ here in Greece, still "coming soon" status though.
Should be getting mine on saturday....