I found this ICs on my G.Skill Ripjaws X 2133 C9

Printable View

02-12-2011, 10:03 PM
PatRaceTin

I found this ICs on my G.Skill Ripjaws X 2133 C9

Anyone know this ICs ?

Is it good?

http://img10.imageshack.us/img10/319...awsx2133c9.jpg

This 2x2GB Kit Rate
2133Mhz
9-11-9-28-2T @ 1.60V
02-12-2011, 10:15 PM
Johnny87au

Bbse's:up:
02-13-2011, 03:50 AM
theix

It's PSC :p:
02-13-2011, 04:52 AM
Alex-Ro

HYNYX same chips as on 2200 models 7-10-7 7-10-10 ;)
02-13-2011, 05:13 AM
websmile

3G-x normally means PSC- no idea how someone can say BBSE, I don´t know marking on actual Hynix but doubt they take the same as Powerchip;)
02-13-2011, 05:24 AM
Don_Dan

Those are PSC... Hynix has PNs starting with H5T, and Elpida BBSE has BBSE in their PN ( J1108BBSE-DJ-F ).

How can you guys say it's Hynix or BBSE?! :rolleyes:
02-13-2011, 05:41 AM
Hondacity

Quote:

Originally Posted by Johnny87au

Bbse's:up:

you obvioulsy love the forum...15.6 posts per day.... you're the second most active poster..just behind movieman at 15.8 posts per day....

how did you come up with bbse?
02-13-2011, 09:11 AM
Leeghoofd

I love them RipjawsX Patracetin, doing 7-9-7 2133 on the Sandy with 1.65Vdimm here... 7-10-7 only requires 1.575
02-13-2011, 09:18 AM
Alex-Ro

Same chips as the blue RipJaws :D no need to buy 7-10-7 or 7-10-10 2200 model :D
02-13-2011, 09:37 AM
Leeghoofd

latter will prolly be beter binned Alex... I can't get the same clocks as with the Flares ( which is quite normal :p) Cas 6 is not a real option here
02-13-2011, 10:04 AM
Splave

6-9-6-24 or 6-10-6-24 doesnt work leegie? :)
02-13-2011, 10:11 AM
Leeghoofd

Not with my RipjawsX C9 review kit , Flares no problemo at 1.675Vdimm...

Tried up to 1.7Vdimm... always fails in Memtest ( runs pi and 3D though ) , also crashes hard in battlefield when playing online... best for these sticks might be 7-10-7-24 at 1.57Vdimm...
02-13-2011, 10:20 AM
Splave

thanks mate :up:
02-13-2011, 10:29 AM
Alex-Ro

Well my blue 7-10-10 kit runned at 1.62 at 7-10-7 2133,so your kit does better :D So it's not about binning,it's about luck :)
02-13-2011, 10:51 AM
Leeghoofd

Could be board too Alex, they run stable at 7-9-7 on the Sabretooth, but not on the Pro or Dlx 7-10-7 it has to be there... the CL7-10-7 kits mostly do CL6-9-7 like the Flare kit... 7-10-10 is something else...
02-13-2011, 11:29 AM
Alex-Ro

U sure 7-10-10 2200 have different chips than 7-10-7 model?I thought thew are the same...
02-13-2011, 11:39 AM
Leeghoofd

like said before could be clever binning... other example My Corsair GTX2s are far sub par then most out here ( K I don't pump 1.75ish volts through them) but 2200cl7 is usually a no go on I7, same for AMD benching 2000CL7 is a pain in the but... same Ics world of difference, yep sometimes luck is involved...

Open your ripjawsX ( goes pretty easily ) and give us a piccie Alex plz

these are my 2133CL9-10-9-28 1.5V F317000CL9D-4GBXMD

http://users.telenet.be/OAP2/Sabreto...ipjawsXICs.jpg
02-13-2011, 11:53 AM
Alex-Ro

I can't i just sold them ;) Guys stop this madness with BBSEE,have you ever saw BBSE doing cas 6?Jeezz...
02-13-2011, 12:48 PM
bro20000

Just tuck my heatsink off on my C7-10-10-27 and the code is XFG22-4A3G-A
What are theses!
02-13-2011, 01:06 PM
Don_Dan

Quote:

Originally Posted by bro20000

Just tuck my heatsink off on my C7-10-10-27 and the code is XFG22-4A3G-A
What are theses!

Those are PSC as well. :)
02-13-2011, 01:14 PM
TJ TRICHEESE

yea they are definitely not bbse's, I have some and they say BBSE on them
02-13-2011, 01:24 PM
bro20000

Are the 7-10-7-27 BBSE then and r they better!
02-13-2011, 01:29 PM
XII

Quote:

Originally Posted by Alex-Ro

I can't i just sold them ;) Guys stop this madness with BBSEE,have you ever saw BBSE doing cas 6?Jeezz...

Yes, I have, like my Mushkins, but they stop C6 around 1800 :D

They were the first, to run 6-8-6 and 6-9-7:ROTF: when the NMH-E`s died like flies:ROTF: and were recalled.

Those old days:rofl:
02-13-2011, 03:49 PM
Johnny87au

Quote:

Originally Posted by Hondacity

you obvioulsy love the forum...15.6 posts per day.... you're the second most active poster..just behind movieman at 15.8 posts per day....

how did you come up with bbse?

Pcc criminal mentioned they were...
02-13-2011, 03:52 PM
Johnny87au

And yes Alex I've seen cas6 with bbses with alot of my kits..
02-13-2011, 05:02 PM
Rone

As correctly stated by Don_Dan, both photos show PSC chips. :)
02-13-2011, 05:05 PM
Johnny87au

Yeah the c9 2133s seem like pscs but I think the cas7 kit are bbses
02-14-2011, 01:49 AM
Alex-Ro

Are you retard?Have you ever say BBSE chip in your hand or you only speak because you have a mouth and spread non-sense around?
02-14-2011, 01:57 AM
Lsdmeasap

BBSE = EOL

So nothing new is going to use those chips.
02-14-2011, 02:00 AM
Johnny87au

Quote:

Originally Posted by Alex-Ro

Are you retard?Have you ever say BBSE chip in your hand or you only speak because you have a mouth and spread non-sense around?

Are you gay having a topless bulked up male in your display pic ? Can someone please take a pic of the cas7 kits.. i want to make sure..
02-14-2011, 06:30 AM
Ket

Play nicely children. Some screenshots would settle things :D
02-14-2011, 02:14 PM
Don_Dan

Quote:

Originally Posted by Alex-Ro

Are you retard?Have you ever say BBSE chip in your hand or you only speak because you have a mouth and spread non-sense around?

Quote:

Originally Posted by Johnny87au

Are you gay having a topless bulked up male in your display pic ? Can someone please take a pic of the cas7 kits.. i want to make sure..

You guys crack me up... :rofl:
No need to get personal over a few small chips. :shakes:
All of those low tCL, high tRCD kits are using PSC chips, trust me.

Afaik, only the F3-17000CL8D-4GBXMD kit is built using BBSE ICs.

Quote:

Originally Posted by Rone

As correctly stated by Don_Dan, both photos show PSC chips. :)

Thanks Ron! ;)
02-14-2011, 03:21 PM
zsamz_

i'm 99% that those are psc
i can do 2000mhz cas6 on my gskills 2x2 that are psc;)
02-14-2011, 03:38 PM
Leeghoofd

Wrapping up my little review, online soon... pretty happy with the performance... now the other brands need to send me gear too :p
02-14-2011, 04:52 PM
Johnny87au

Quote:

Originally Posted by Don_Dan

You guys crack me up... :rofl:
No need to get personal over a few small chips. :shakes:
All of those low tCL, high tRCD kits are using PSC chips, trust me.

Afaik, only the F3-17000CL8D-4GBXMD kit is built using BBSE ICs.

Thanks Ron! ;)

Thanks for confirming that don.. Check your pm
02-15-2011, 08:21 PM
PatRaceTin

I will find some XFG to test with my 2600K
02-15-2011, 08:29 PM
eva2000

Quote:

Originally Posted by Lsdmeasap

BBSE = EOL

So nothing new is going to use those chips.

Quote:

Originally Posted by Don_Dan

You guys crack me up... :rofl:
No need to get personal over a few small chips. :shakes:
All of those low tCL, high tRCD kits are using PSC chips, trust me.

Afaik, only the F3-17000CL8D-4GBXMD kit is built using BBSE ICs.

Thanks Ron! ;)

yeah Elpida BBSE EOL, but what's chances some low CAS high tRCD are some form of Elpida BDBG variant ??
02-16-2011, 01:33 AM
Dumo

Quote:

Originally Posted by Don_Dan

All of those low tCL, high tRCD kits are using PSC chips, trust me.

QFT

Don is right....even before the ram on his display pic was a rage here:)
02-16-2011, 03:05 PM
Don_Dan

Quote:

Originally Posted by eva2000

yeah Elpida BBSE EOL, but what's chances some low CAS high tRCD are some form of Elpida BDBG variant ??

I'm just going by my experience that G.Skill is almost solely using PSC on most of their kits. The only manufacturer that has been using BDBG on many kits is Kingston afaik.
BBSE is EOL, but Afrokalle confirmed the set I mentioned above is using BBSE chips. Maybe they're just clearing old stock and they'll change chips soon... who knows?

Quote:

Originally Posted by Dumo

QFT

Don is right....even before the ram on his display pic was a rage here:)

Thanks! :)
02-17-2011, 08:19 AM
theix

I got these PSC chips on my G.Skill 1600 4GBXM

http://img573.imageshack.us/img573/5679/dsc6566.jpg
02-17-2011, 09:13 AM
tool_462

Quote:

Originally Posted by theix

I got these PSC chips on my G.Skill 1600 4GBXM

That PCB is damn sexy.
02-17-2011, 10:19 AM
eva2000

heads up guys Ron is updating ramlist again, so submit those yummy ic info/photos http://ramlist.i4memory.com/ddr3/ :)
02-17-2011, 10:39 AM
tom1

Quote:

Originally Posted by eva2000

heads up guys Ron is updating ramlist again, so submit those yummy ic info/photos http://ramlist.i4memory.com/ddr3/ :)

Nice news
02-17-2011, 11:03 AM
Leeghoofd

George the 1700CL9D4GBXMD are 1.5Vdimm rated not 1.65 as Ron mentions in the list...

http://users.telenet.be/OAP2/I4memory.jpg
02-17-2011, 11:12 AM
Don_Dan

Quote:

Originally Posted by Leeghoofd

George the 1700CL9D4GBXMD are 1.5Vdimm rated not 1.65 as Ron mentions in the list...

Ooops, my bad, sorry. :(
02-17-2011, 04:32 PM
PatRaceTin

Elpida buy psc and screen cross brand on ic

What do you think?
02-17-2011, 06:39 PM
Johnny87au

Quote:

Originally Posted by eva2000

heads up guys Ron is updating ramlist again, so submit those yummy ic info/photos http://ramlist.i4memory.com/ddr3/ :)

Thanks heaps mate, Will save so me time! :up:
02-17-2011, 07:27 PM
Rone

Quote:

Originally Posted by Leeghoofd

George the 1700CL9D4GBXMD are 1.5Vdimm rated not 1.65 as Ron mentions in the list...

Fixed.

Quote:

Originally Posted by eva2000

heads up guys Ron is updating ramlist again, so submit those yummy ic info/photos http://ramlist.i4memory.com/ddr3/ :)

I've got nothing to add to this except: Keep 'em coming, guys! :D
02-17-2011, 08:11 PM
Eldonko

Sweet, love RAM list. Dont see my F3-17066CL9D-4GBTDS Trident in there but Im quite sure it is PSC anyway. Scales with volts and does 7-9-7 2250+
02-18-2011, 12:48 AM
diezel

i have the black PC3-17600 Ripjaws X F3-17000CL7D-4GBXHD (2x2GB) 2133mhz 7-10-7-27 @ 1.65V
i think the have the good Powerchip on it ....
02-18-2011, 08:21 AM
ihog6hog

this is PSC XFG on G.Skill 2000C9 4GBRM Jan 2011 test by PatRaceTin

http://imageshack.us/photo/my-images...grm2000c9.jpg/

http://img810.imageshack.us/img810/6...160vhp32x8.png

http://img413.imageshack.us/img413/9749/spdw.png

this chip is same G.Skill 2200C7 4GBXHD

1.6V can run 2133 7-10-7-27 1T on Hyper-Pi 32M Pass

**This time G.Skill 2000C9 4GBRM Feb 2011 have PSC XET**

http://img193.imageshack.us/i/img0026bj.jpg/

I think fastest for PSC is XDX => XEX too , but nobody no have or no show picture

XDT => XET , XDY => XEY , XDG => XEG => XFG , XDZ => XEZ , XDE => XEE
02-18-2011, 08:22 AM
ihog6hog

Quote:

Originally Posted by diezel

i have the black PC3-17600 Ripjaws X F3-17000CL7D-4GBXHD (2x2GB) 2133mhz 7-10-7-27 @ 1.65V
i think the have the good Powerchip on it ....

you have a PSC XEY

http://www.kitguru.net/components/me...idge-review/2/
02-18-2011, 08:41 AM
Leeghoofd

Off topic : how did Kitguru do +2336mhz on their test platform ? With 106.5 Bclock I'm at 2272Mhz... so they were able to OC to 109.5. Great stuff, still would love to see some screenshots for proof. The 2420Mhz is totally out of whack... 113.4Bclock, P55 test platform maybe ?
02-18-2011, 07:17 PM
PatRaceTin

i7 - 800 Series
can push RAM to the edge

All times are GMT -8. The time now is 06:14 AM.

XtremeSystems