Printable View
Hey guys
Just finished tunning my new setup running @ 4.8ghz and the only issue I now have is that the PC will not resume from standby / sleep.
Computers lights and fans are on, but no signal goes to my monitor or TV.
I tested the standby without the overclock with all default settings in the bios and it works just fine..
Anybody else?
Thanks!
From my experience, S3 resume is very sensitive to o'c stability so I would say that your o'c is probably still not stable enough for S3 to work.Quote:
Originally Posted by orion23
None of my builds have ever been able to resume from standby :( If anyone figures out the trick for this board I'll be all ears
Ya, Same problem. I can run 32M HyperPi's all day or burn ins, but the resume looks like it's starting up the computer, but the monitor never wakes up and it's frozen. Only hard reset works after that.
This sucks for me...I had my old Q6600 IP35 PRO @ 3.6ghz 24/7 and standby worked like a beauty and the damn thing was never more than 30 seconds prime95 stable, however, it almost never crashed on me.
This new build passes Prime95, Lynx and the Intel burn test with no issues, yet it crashes out of the blue (only when I disable Speedstep...), and standby will not work for me :confused:
none of my p8p67 or extreme4 works on s3 sleep wake up
Most unusual, had no problems with S3 resume on the Asrock Extreme4 and the Pro over here.
I can sleep and wake up just fine with my P8P67 Deluxe, when overclocked or when stock. However, I have to click my mouse in order to wake it up from sleep; pressing keys on the keyboard will not wake it up.
Quote:
Originally Posted by MacClipper
What are your overclocked speeds?Quote:
Originally Posted by korruptedone
I just tried my board @ 4.4ghz with 1.3V and standy is working again.
4.8ghz with 1.385V = PC won't resume from standby.
Does it boot back up ok at 4.8 ok if you power down?Quote:
Originally Posted by orion23
Its weird. my board (p8p67 dlx) wouldnt resume from standy by so I held the power button till it went off. Turned it on, went through bios screens, and then it said waiting for resume........
If you have cpu pll voltage override enabled , it s normal !
hello guys, maybe this will help some of you.
request the hotfix from microsoft the information is below
http://support.microsoft.com/kb/977178/#top
if this is not the issue then sorry :shrug:
I disabled PLL Overvoltage and it didn't fix anything.
The hotfix sounds promising. I do have a 2TB green drive. I might request that.
OK also with Sabretooth at 4.5GHz, using a 2TB SATA3 HD all along too.
http://i173.photobucket.com/albums/w...h/414822cd.png
FWIW, I don't think this is just an Asus problem. I had the same behavior on the Gigabyte UD4 board. It would sleep just fine at 4.5, but upping the clocks to 4.8 caused sleep to fail (it would either not wake up, or enter an endless reboot cycle).
Hmmm, now that I think about it - I did have PLL Overvolt off at 4.5 and on and 4.8.
I was actually having no issues resuming from sleep until upgrading to the latest 1253 BIOS (I was previously on 1053).
Now, it's the same as you guys. The system turns on, fans, lights, everything is spinning up... but nothing is sent to the monitor. If I do a hard reset, the system boots back up fine and then resumes using the Hybrid files that Windows stores.
PLL overvolt causes S3 to not function correctlyQuote:
Originally Posted by Forceman
It definitely has some impact (at 4.5 mine will sleep with PLL off, and not with PLL on) but it seems that at higher multipliers it doesn't work no matter how PLL is set (4.8 fails for me with PLL on and with PLL off).Quote:
Originally Posted by dinos22
S3 Resume still works at 47x, Internal CPU PLL Overvolt not needed nor enabled.
http://img709.imageshack.us/img709/3...ll1750mvdd.png
Apparently it's a known issue, wonder if this is Asus only or across all makes,
http://www.hardforum.com/showthread.php?t=1579942
S3 standby has ALWAYS been problematic on overclocked systems; it was designed for a normal stock running system (a mom and pop system), and it's always up to the board manufacturers to cater to overclockers who want to use S3.
Old 975X boards had issues resuming from standby until bios updates...I think the issue back then was either vcore or RAM timings reverting to default after standby ...
My previous Gigabyte P67A-UD4 also had sleep issues. Apparently it is a known Intel issue with PLL Overvoltage.Quote:
Originally Posted by MacClipper
A friend of mine had a lot of resume after sleep issues with Vista. Short advice is; do NOT use / do not allow the computer to go into sleep mode!
jarle
Thanks for this guys, I disabled PLL overvolt and now can run my 2600K at 46x with S3 resume working fine. My temps are even a few degrees lower on load. Just wondering, any pros/cons to S3 vs S3+4 (hybrid sleep), especially with a SSD boot drive?
What options do you have enabled / disabled under CPU power management?Quote:
Originally Posted by wongnog
C1E?
Speedstep?
C3?
C6?
I have all 4 of those enabled (some were auto after upgrading to 1253)Quote:
Originally Posted by orion23
On Asus mobos, the Internal CPU PLL Overvolt option has to be manually set to Disabled (default is Auto) else S3 resume fails.
My all time favourite 30s torture test... S3 resume, M4E passed with flying colours while o'ced with 16GB KVR-1333 Hynix H9c RAM! :D
http://img834.imageshack.us/img834/7...kvr1866910.png
This is a bios bug guys,my board does it also.Im on wireless mouse and keyboard and it wont wake up from sleep.Holding power button untill computer shuts off then when I push the button on again I get windows is resuming and everything is where it was before sleep.
I thinks its a windows and bios issue.Im on ssd hds and a 1tb drive also.
Waiting for new bios
So is the magic number 47, any past this and S3 will not post? Damn, I even tried bios 1506. This is really annoying!!
Any new ideas or insights about this problem.
No it just depends on your CPU what the max it will do with PLL Overvoltage off.
For some it is 46, others, 47, and even up to 51.
My PLL is disable and the system is stable at 50, but still I'm starring at a blank screen with the monitor stand by light flashing whenever I wake up the computer.
x54 is the absolute max. Those are the chips that can boot windows at X59 (w/pll) with 2 cores.Quote:
Originally Posted by LagunaX
I've updated to the 1606 bios, I have 16gb of GSkill Ripsaws running at 1600. I've turned off PLL over voltage, but the computer continues to not wake up from sleep. I have the memory voltage set @ 1.5. If I remove 8gb of Ram sleep decides to work correctly! Any adjustment I can change to put the 16gb of memory back in?
Thnks in advance
Tried bumping VCCIO a notch?Quote:
Originally Posted by D_BRASCO
Thnks for the response. I'm sure that setting is on auto. I will try when I get home. What's the nominal voltage for vccio? What is the safest max?
same prob hotfix received says its not for my system... pll ov disabled still wont resume?? this only happens to me with asus systems.. had the same prob with my REX until the last bios was released :( hopefully i dont have to wait a year for ASUS to address this!
The default is 1.05V IIRC. I wouldn't go beyond 1.15V for daily usage, but I got no data to back me up :shrug:Quote:
Originally Posted by D_BRASCO
Well I raised it to 1.15v with 16GB and the same problem returning from standby. If I remove 8GB resume from stanby normally. I'm at a loss! Anyone have anymore suggestions?
Thnks D
Unfortunately you are not alone with the sleep problem. There is a 21 page topic in the Asus Sabertooth P67 forum alone from users with this issue. Most are using stock systems with BIOS defaults. All supposed fixes have been tried without success. It's just the luck of the draw if your P67 system works after being in sleep mode.
BTW a lot of people who think they don't suffer from this problem because in most cases their systems will resume from sleep as long as the system hasn't been asleep for more than 2 hours. The best test is to leave the system sleep overnight and then try and wake it the next day.
Well I upgraded to bios 1702 and for grins I bumped up DRAM Data REF and Ctrl REF voltage on channel A/B 1 bump from default and for the last 36 hours my system has resumed from sleep properly with the 16GB of Ram. The shortest tested time resume from sleep was 8 hours hopefully this continues to function. I will update with any changes. Hope this helps someone as I was about at the end of my rope......
D
Nice :)
What other changes does this bios?
There is a windows workaround here http://www.sevenforums.com/network-s...ues-fixed.html
I tried everything on google that I could find and this fix did it for me. Cheers.
Hi,
After upgrading my bios to 1850 my wakeup from sleep mode broke. Fans and lights start working when you wake it up, but screen doesn't go up (and system is not accessible via network). Tried reverting bios update, didn't help. Then (thanks to google search) found this forum, and now, after disabling the PPL overvoltage it now works perfectly again!
Thank you guys !
Sergey.