Gigabyte GTX460 SOC (quick test)

Printable View

11-14-2010, 12:35 PM
elmor

Gigabyte GTX460 SOC (quick test)

No 580 here yet so why not test a 460? :)

Setup:
Core i7 980X 3013A
Rampage III Extreme
3x2GB A-data XPG 2200+
Cooler Master Silent Pro 1200W
OCZ Core v2 30GB
Petripot on CPU and Rybas fatty pot on GPU

http://imup.se/i/zCSzX2XeX8.jpg

The result (nice and even)

http://imup.se/i/JAZnYGJIk5.png

1.55vGPU at -120*C was used for this result. Unfortunately the card has CBB at -60 and CB at around -120 so it was not very nice to bench. Some mods are needed for it to reach full potential, see below.

http://imup.se/t/3IooDYlzZK.jpg http://imup.se/t/GfTkjDjnDD.jpg
11-14-2010, 12:40 PM
SF3D

How could you do this :shakes:

No, for real that is very nice score and I like the "new" lab :up:
11-14-2010, 01:10 PM
skier

1.55vGPU :slobber:

how do you discover these mods? just knowing what the components are? or is there more engineering to it (i've only taken Electrical/Computer Engineering 101)
11-14-2010, 01:25 PM
elmor

Quote:

Originally Posted by skier

1.55vGPU :slobber:

how do you discover these mods? just knowing what the components are? or is there more engineering to it (i've only taken Electrical/Computer Engineering 101)

You check the datasheet :) Here is the one for ADP4100: http://www.onsemi.com/PowerSolutions...DP4100JCPZ-RL7

There you have pin layout and circuit schemes. Check which components each pin of interest is connected to and you can figure out what to do in order to improve what you need. In some cases like OCP for the ADP4100 there's a separate section explaining how to set the current limit.
11-14-2010, 02:48 PM
miahallen

WOW....great clocks on that card Jon :up:
11-14-2010, 03:01 PM
ScottALot

Where can you get that RAM? I've been looking for red/black themed RAM on a high-end budget ... so no Dominator GTs for price, Tridents and Ripjaws are out of stock!
11-14-2010, 05:49 PM
pr@$r1g

Hi elmor

Can these high performance GDDR5 be overclocked to their specified speed 1250mhz ?

I own a Msi 460 HAWK Talon ,which is having same speed hynix memory on it ... MAX it can go 1180MHz with 1.78v.

Some OCing performance on AIR ...please :)

Requesting for sharing Gigabyte 460 SOC's bios ...
11-14-2010, 06:39 PM
dinos22

nice clocking man
11-14-2010, 10:15 PM
Johnny87au

1310 best ive seen so far on the 460's!
11-15-2010, 01:43 AM
elmor

Thanks guys :)

Quote:

Originally Posted by ScottALot

Where can you get that RAM? I've been looking for red/black themed RAM on a high-end budget ... so no Dominator GTs for price, Tridents and Ripjaws are out of stock!

It seems they are not very available in the US, here in Sweden they are €220 for 2x2GB PC17600 and €170 for 3x2GB PC15000. These are the exact model: http://www.adata.com.tw/?action=prod...&cid=5&piid=88

Quote:

Originally Posted by pr@$r1g

Hi elmor

Can these high performance GDDR5 be overclocked to their specified speed 1250mhz ?

I own a Msi 460 HAWK Talon ,which is having same speed hynix memory on it ... MAX it can go 1180MHz with 1.78v.

Some OCing performance on AIR ...please :)

Requesting for sharing Gigabyte 460 SOC's bios ...

I did a quick test and it'll do 950/1100 in Vantage with 1.2vGPU on air. Unfortunately something is stoppping the RAM from running at full speed, IMC or some timing perhaps. The stock bios is available here: http://elmor.se/files/460soc.zip, but I doubt it's compatible with your hawx. There's also a bios with "coldslow" fix which they won't allow me to share (seems they can't because of Nvidia).
11-15-2010, 05:44 AM
Afrokalle

Nice benching :)

1310MHz on GPU is really nice :up:

Waiting for more....
11-15-2010, 05:59 AM
pr@$r1g

Thanks for sharing :up:

I just want u to try a Gigabyte 460 OC1 F3 bios.

There's something to do with memory with that bios ... just give it a try.

Me too can't go above 950/1180 no matter what voltage i provide .... VRM area gets very very hot & there's no holes to put any HS

"There's also a bios with "coldslow" fix which they won't allow me to share (seems they can't because of Nvidia)." Is this bios provided in drivers CD or i have to request someone to get it .
11-15-2010, 06:45 AM
matose

Nice job Elmor! What VID did you set?
11-15-2010, 08:42 AM
elmor

Quote:

Originally Posted by pr@$r1g

Thanks for sharing :up:

I just want u to try a Gigabyte 460 OC1 F3 bios.

There's something to do with memory with that bios ... just give it a try.

Me too can't go above 950/1180 no matter what voltage i provide .... VRM area gets very very hot & there's no holes to put any HS

"There's also a bios with "coldslow" fix which they won't allow me to share (seems they can't because of Nvidia)." Is this bios provided in drivers CD or i have to request someone to get it .

You'll have to request it from the Gigabyte VGA department.

Quote:

Originally Posted by matose

Nice job Elmor! What VID did you set?

I changed VID6 to 0 which gave me 1.35v in idle, 1.5v in 3d and 1.55v during load.
11-15-2010, 02:27 PM
sofos1990

Nice clocks on that little card !
11-15-2010, 10:30 PM
pr@$r1g

thanks elmor

I will mail them after i receive my 460 SOC.

I might receive my SOC this week ,i will test it :)
11-16-2010, 03:09 PM
NE_O

Well done Elmor looking good.
I tried OCP mod, but I removed resistor instead of adding a trimmer.
So when I set 1.3V (I use software not VID) it gave too much current so I think card is dead. :shrug:
sigh.... Don't know what I did wrong, any suggestion?
11-17-2010, 08:08 PM
trans am

Absolutely Rippin!
11-17-2010, 08:22 PM
Mean Machine

Meh. I have one of these myself, but I was planning on handing that to Mattias. Don't make me...
11-18-2010, 05:06 PM
elmor

Quote:

Originally Posted by pr@$r1g

thanks elmor

I will mail them after i receive my 460 SOC.

I might receive my SOC this week ,i will test it :)

Good luck :)

Quote:

Originally Posted by NE_O

Well done Elmor looking good.
I tried OCP mod, but I removed resistor instead of adding a trimmer.
So when I set 1.3V (I use software not VID) it gave too much current so I think card is dead. :shrug:
sigh.... Don't know what I did wrong, any suggestion?

Try to completely power off the system (wait until all LEDs are off). OVP will kick in at 1.3v when only using software so that's probably what happened.

Quote:

Originally Posted by Mean Machine

Meh. I have one of these myself, but I was planning on handing that to Mattias. Don't make me...

It's not the easiest card to bench, lots of cursing ahead if you give it a try :D
11-18-2010, 05:13 PM
dinos22

Is this because of the CB and CBB issues Elmor? Did you use that bios they sent you? Does it do anything to fix CBB and CB issues?
11-18-2010, 05:21 PM
Hondacity

wow 1300.....impressive elmor!

whats your max ddr5 voltage? most of these ddr5 are from samsung right?

thanks :D
11-18-2010, 05:35 PM
elmor

Quote:

Originally Posted by dinos22

Is this because of the CB and CBB issues Elmor? Did you use that bios they sent you? Does it do anything to fix CBB and CB issues?

Yeah, mostly. The bios only fixes "coldslow", throttling at low temps.

Quote:

Originally Posted by Hondacity

wow 1300.....impressive elmor!

whats your max ddr5 voltage? most of these ddr5 are from samsung right?

thanks :D

I used max 1.85v, but almost no gain from stock 1.5v.
11-18-2010, 11:01 PM
pr@$r1g

1 Attachment(s)

that's why i asked u to try this bios "Attached"

It helped me with memory on my 460 HAWK Talon. Just give it a try :)
11-19-2010, 12:35 AM
THOMO

Awesome clocks, great work :)
01-29-2013, 03:24 PM
K404

Thread necro! Does anyone have/is willing to share the CBB mod?

Is R5278 the OCP mod?