This is Not a Nano Pre mix. This is FCKU-1

Started up a new thread for this. Think it deserved it.

Oky this is some thing i have been working on for quite a long time.

This is NOT a nano pre mix. Nope this is Not "Ice Dragon Nano Fluid"

This is Black Dye + FCKU-1 (this is not a dye and there for will not stain your system)

http://i2.sqi.sh/s_1/38Y/dscf7195.jpg

This is some thing ive been working on for a while as some one last year said its not possible to have a real white mixture in a water cooling loop. I did not believe it. All so because some people think i just work with dyes !!!!

I will need some testers if there willing to give this a go. :)

Or if any manufactures fancy sending me a sample of a injection block i wont say no !!!!

mlwood...lol now you make a white coloured fluid when i already ordered clear/uv blue. Ive been looking for a white coolant all along....heard nano one just loose their colour after a while.

This should not lose it colour after a while how ever like all fluids will need changing after 9 months to 1 year.

Its a some what basic mix of d-water + (some thing special) + some thing else different.

Its totally environmental friendlily, contains no harmful substances. You will need a kill coil with it or biocide.

I really dont want to start making it into a pre mix as such until its been tested in a injection system.

All so im working on making it a Concentrate all though it is difficult but i think possible.

Is it possible to make any sparkly liquids? Ie with very very fine metallic like particles? it would be good to actually see something whizzing around the system. I imagine the particles would have to be the same weight displacement as the liquid so it remains in suspension and also fine enough not to clog acceleration plates/channels etc. This may introduce impellor wear or something but it may be possible.

Quote:

---

Originally Posted by Mudgey

Is it possible to make any sparkly liquids? Ie with very very fine metallic like particles? it would be good to actually see something whizzing around the system. I imagine the particles would have to be the same weight displacement as the liquid so it remains in suspension and also fine enough not to clog acceleration plates/channels etc. This may introduce impellor wear or something but it may be possible.

---

Yes if this works after testing i can suspend any thing in water. My main goal over the last few months has been this and getting the viscosity right so that the impellor on pumps does not get buggered up. How ever im out of hardware for testing now due to the fact ive been testing so much and now im in need of help :) ...

p.s The viscosity of this liquid is only just above water. All so i am not making any claims that this is any super cooling fluid as it is not but i am using tiny partials to create it.

So yes this is a suspension fluid for water cooled PCs.

I really hope it works and that we can see some pretty sparkly fluids in the not so distance future!

I would love to help, however my livelyhood depends on my computer and I cannot afford to change things unless I absolutely have to, or I have no work on!

Good luck with this and it is something I shall be watching closely :)

thank you and i hope so to :) ....

Huh i got enough spare parts to make a seperate testing loop. Pm me what ya need.

Sent from my X10a using Tapatalk

Was asked if i could do a gun metal gray with the ice dragon and no matter how hard i tried i could just not get it right how ever because this is not like a nano fluid well pictures speak louder than words ...

http://i2.sqi.sh/s_1/39E/dscf7252.jpg
http://i2.sqi.sh/s_1/39E/dscf7251.jpg

The 7th color from the left looks great!

Dammmmmm you Now I need number 1 !!!!!!!!!!!!!!!! you made it !!!!!!!!!!

I though I was finally done ordering stuff.

Pm me with whatever details are need to get that Gunmetal grey ;-)

Deadly stuff mlwood :)

What are you looking for as far as testing? May be able to help out as I have enough stuff to do 2 spare loops :)

You might rethink the product name. FCKU sounds at least to me like . . . .
also, nice TribalOverkill dual chamber res. I have a couple left around here. I miss that dude.

Quote:

---

Originally Posted by DarthBeavis

You might rethink the product name. FCKU sounds at least to me like . . . .
also, nice TribalOverkill dual chamber res. I have a couple left around here. I miss that dude.

---

• I was going to say the same thing about the name.
• So this is a non-depositing suspension?
• Does that mean it won't clot up water blocks?
• Blood red... now.

Quote:

---

Originally Posted by DarthBeavis

You might rethink the product name. FCKU sounds at least to me like . . . .
also, nice TribalOverkill dual chamber res. I have a couple left around here. I miss that dude.

---

No the name stays for now 2 reasons (i have loads of emails about my name and pms so ill tell you why)

Its a Massive FCKU to "Redraider" aka "Joel P Guirdy" for saying im a scamming (rude word) and that i make make rubbish when in fact i work my ass off and and trying to bring some thing to the community at a cheap price and that is honest and excellent value for money (well i think it is). The guys only annoyed cos customs stopped his order and sent it back to me ... (not my fault). then he slags me off calling me all the names under the sun and says my products are rubbish yet he's never even tested it.

and all so a big FCKU to Gilgermesh (how ever its spelt) who likes to review pre released products still under testing who all so thinks its only dye and all so rips into me on his web site calling me all the names under the sun because he didn't get exclusive rights for reviews. (tough luck you lose bud).

So this product name is in honour of both of them ... (we will call it a beta test name)

:) and plus the name sounds good ....

"Ive got some FCKU-1 in my system :) ....

Please remember though this is NOT a retail product it is only a test to see if its possible and if it does work may bring some thing to the table that once again up the anti a little more and freak out all those lovely water cooled mods :) ....

I do this for several reasons

1) I love My hobbie.

2) I love working with people in the hobbie and i think its a very respectable community.

3) I would like to try and make a business that is different and works on different principles to other larger company's

4) ever thing i make and retail will be sold with a no bull approach and only honest and truthful sales techniques will be employed.

Made by the community, for the community with the community in mind.

mick

(god im gonna get ripped into now)

(added)

I dont what to go into how i am making it just yet as its in beta and there are lots of big company's who roam these forums looking to steal ideas. When and if it ever takes off i will fully go into details.

As for testing there are 4 versions of the fluid each using different techniques to suspend the matter in the liquid. Now each one does use different matter to suspend it hence why it rely needs to be tested in injection systems to make sure it works correctly. If it blocks water blocks (which i hope it wont) then i can revise and work on it more.

I really would like to test this in house though to start with but right at this moment in time it is not possible due to me only owning 4 full pcs that are water cooled and 1 has nano fluid under test with dye, 2 have some new products under test (never shown before). and 1 is my working PC.

Quote:

---

Originally Posted by mlwood37

No the name stays for now 2 reasons (i have loads of emails about my name and pms so ill tell you why)

Its a Massive FCKU to "Redraider" for saying im a scamming (rude word) and that i make make rubbish when in fact i work my ass off and and trying to bring some thing to the community at a cheap price and that is honest and excellent value for money (well i think it is). The guys only annoyed cos customs stopped his order and sent it back to me ... (not my fault). then he slags me off calling me all the names under the sun and says my products are rubbish yet he's never even tested it.

and all so a big FCKU to Gilgermesh (how ever its spelt) who likes to review pre released products still under testing who all so thinks its only dye and all so rips into me on his web site calling me all the names under the sun because he didn't get exclusive rights for reviews. (tough luck you lose bud).

So this product name is in honour of both of them ... (we will call it a beta test name)

:) and plus the name sounds good ....

"Ive got some FCKU-1 in my system :) ....

Please remember though this is NOT a retail product it is only a test to see if its possible and if it does work may bring some thing to the table that once again up the anti a little more and freak out all those lovely water cooled mods :) ....

I do this for several reasons

1) I love My hobbie.

2) I love working with people in the hobbie and i think its a very respectable community.

3) I would like to try and make a business that is different and works on different principles to other larger company's

4) ever thing i make and retail will be sold with a no bull approach and only honest and truthful sales techniques will be employed.

Made by the community, for the community with the community in mind.

mick

(god im gonna get ripped into now)

(added)

I dont what to go into how i am making it just yet as its in beta and there are lots of big company's who roam these forums looking to steal ideas. When and if it ever takes off i will fully go into details.

As for testing there are 4 versions of the fluid each using different techniques to suspend the matter in the liquid. Now each one does use different matter to suspend it hence why it rely needs to be tested in injection systems to make sure it works correctly. If it blocks water blocks (which i hope it wont) then i can revise and work on it more.

I really would like to test this in house though to start with but right at this moment in time it is not possible due to me only owning 4 full pcs that are water cooled and 1 has nano fluid under test with dye, 2 have some new products under test (never shown before). and 1 is my working PC.

---

TMI. I was just joking a bit, did not need the full scoop.

Quote:

---

Originally Posted by DarthBeavis

TMI. I was just joking a bit, did not need the full scoop.

---

trust me mate the amount of ppl on msn, pms and FB asking why ive called it that and know every one knows.

Quote:

---

Originally Posted by mlwood37

trust me mate the amount of ppl on msn, pms and FB asking why ive called it that and know every one knows.

---

if you are going to be in this business you better get a thick skin. I mean really thick

i kept quiet for a while and know i get slagged off all the time but these two bums deserve a product named after them :) ...

And back to me volunteering a loop for testing. ..... swiftech mcr-320 mcp-350 pump ek rest top and swiftech xt block.

Simple basic loop I'm taking out of my corsair when I convert it to air cooled file server.

Sent from my X10a using Tapatalk

Ill get back to people with in a week or so about testing.

Need to double / triple check every thing before i go ahead and push this forwards for testing.

Thank you guys though for letting me know your interested and as soon as im ready to push forwards ill let you know.

mick

Quote:

---

Originally Posted by mlwood37

i kept quiet for a while and know i get slagged off all the time but these two bums deserve a product named after them :) ...

---

Hopefully, this product becomes more relevant than either of them. :wasntme:

http://i2.sqi.sh/s_1/39U/fcku_1bc.jpg

any thing is possible with this if it works.

Now please dont go injecting this into your arm It's FCKU-1 Positive :rofl:

Blood red achieved once again via. Red + 1/4 drop of Deep blue.

-=Enjoy im off to bed=-

Using that res to display two different colors was a great idea, it really does justice for that blood red.

I was about to say, the name is provocative, until I read your explanation. When I first noticed the hubbub about this Redraider guy here at XS, at first I was just curious, and then I ran across his site and the posts became funny. Every thread laced with profanity, along with the histrionic exclamations and the continual items like "time to nut up". It was good for a laugh during the first few posts I ran across. After that, it bordered on a pathological problem that perhaps needs treatment. All this anger and vendetta, for what ? ... cause the guy got dissed for over promoting stuff here in the water cooling forums and was asked to tone it down ?

It seems neither party is without some problems on their hands, and perhaps it is just the Texas conservative/religious machismo coming thru too loudly, but that site actually speaks to gaudy excitation more than reason or intelligence.

Keep the name, ... I for one like it.

if you want some proper testing done, i would be more than hapy to run some test loops at work. [ocuk]

we have unlimited hardware and a lot of watercooling test loops for overclocked bundles etc that are always running

pm me if you want to sort something out.

I'll test it for you. PM me If you want to send some my way.

I do expect this to separate over a standing time as no liquid like this can keep its form due to gravity. How ever the longer we can keep it from separating the better and the obvious thing that is works in a injection system and under High pressure with out leaving sediment.

Wouldn't the constant flow keep remixing?

Sent from my X10a using Tapatalk

yes it will how ever say you go your holiday and come back say after 2 weeks the mixture will separate.

Now what is needed is that when the pc is started up again it will mix correctly and keep its form when up and running again and not block any ports with in the wc blocks.

What i am doing is suspending Titanium dioxide with a Polymer based substance.

There are few good side effects with the types of chemicals in using as they all so do the following

1) Help suspend matter (as shown)
2) Reduce scale and deposits
3) Reduce the viscosity of dispersion matter

its nothing special really just a different train of thought.

if you need a 24/7 hot running system i could go guinea pig. need to drain and retube anyway.

These look really good. I'd totally try the red or blood red. I really can't wait for the chance. Totally willing to try it out!

Digging the grey and the two recent reds :toast:

Digging the name too :lol:

To be honest as FCKU-1 is a beta test as it is.

when its goes live we going to re-brand it how ever we have sat here for a while and after hours of thinking and not wanting to lose the originality of it we came up with a new name.

We have to say we think this is a big Shout out to Joel and his crew so this T-Shirt is a big shout out to you guys over there ....

Might even get these printed off

http://i2.sqi.sh/s_1/3aE/t_shirtf.jpg

http://i2.sqi.sh/s_1/3aD/t_shirt.jpg

Made out of "Cajun Chicken"

I think it will be a bigger seller as a T-Shirt for lan parties and Modding events than the liquid it self ...

:rofl: :ROTF: :rofl:

These look good :D

The blood red looks amazing. :up:

all i have to say is, fcku

These are not the best Pics in the world and a cpu block needs adding. This has been put in a light tent just to get pics of the liquid (hence bubbles).

This is a long term test (blue dye added for leak detection only).

http://i2.sqi.sh/s_1/3dV/dscf7318.jpg
http://i2.sqi.sh/s_1/3dV/dscf7325.jpg
http://i2.sqi.sh/s_1/3dV/dscf7320.jpg
http://i2.sqi.sh/s_1/3dV/dscf7322.jpg

Now there is fall out if the system is left off for a few ours but this doesn't effect the system what so ever and as soon as its turned back on again the particles are lifted and moved around again with out any problems. The reason for this is gravity (it cannot be avoided) if we make the liquid to strong it will mess up the pump. Because we are using tiny particles (noticed i missed out the nano word ops) haha the liquid seems to work fine. This still needs long term testing though as the liquid is slightly sticky to the touch.

The colours ive managed to make so far as follows..

Pure white
Black
Gray
Pink
Red
Deep Blood red
Aqua Blue
Deep Blue
Purple
Green
Deep Green

+ A full range of lighter colours.

All so ive managed to suspend various other things in the liquid which ill not discuss just yet and i think ill leave them till a later date.

Now a few things to note i think it may be possible to make this a concentrate or a premix. Ill decide on what it will be at a later date.

Nice reservoir ;)
http://www.youtube.com/watch?v=iGoyOkYXPhs

you could do with some of the blood red (fcku-1 version) sending around that thing lol.

Quote:

---

Originally Posted by mlwood37

you could do with some of the blood red (fcku-1 version) sending around that thing lol.

---

defeats the purpose of the reservoir spinner. I did run it with Blood Red Fluid XP at first . . .had fill port in mouth. Forgot to cap it off, turned on system, blood red fluid xp all over the walls. wife was not happy.

pmsl i bet she did your home looks lovly. im sure i would have gone nuts. Yeh the fluid would blank out the spinner as its not a see though liquid.

Oky ive found a couple of problems that need fixing with this mix. When reading early on you see me say the word "Tacky". On weaker magnetic pumps this has a problem that when the pump is left off for 2 days its causing the pump not to start correctly stressing it out. So what i have done is weekend down the suspension mixture so that there is hardly any in mix and all so added in a lubricant to stop this from happing. How ever there is the problem of fall out of the particles when the pc is turned off and separation is more noticeable. How ever because the particles are so small when the liquid is started moving again it doesn't take long for the mixture to mix correctly.

I managed to make this into a concentrate now in this formula and a 10ml bottle would be enough to do 5 water cooling loops but again this still needs lots of testing and lots of work.

Alls so with lots of research i found it is "possible" to make this white liquid UV active. I may work on this at a later date though as ill need to find out more info but if its possible in my eye then its always worth a try.

On testing as well there is a 1 to 2 c in crease in the temperature when compared to a clean D-water system running a kill coil. the reason why i say 1c or 2c is dependent on how small the loop is but this is some thing i can work on later on..

http://www.youtube.com/watch?v=SYCNeGPXzE4


Updated -

Got this working much better than expect.

This is pure white with 4 drops of UV clear blue

http://i2.sqi.sh/s_1/3gh/dscf7364.jpg http://i2.sqi.sh/s_1/3gh/dscf7365.jpg http://i2.sqi.sh/s_1/3gh/dscf7367.jpg

Oky Titanium dioxide just is not floating my boat. It to heavy and the drop out is not good enough for application in the water cooling department. So with lot's more research and after chatting to some very nice chemical engineering chaps I am getting hold of some near gear.

Some of the Bullet points of the maternal I'm going to use.

• Excellent Lubricating Properties due to low Coefficient of Friction at 0.15 to 0.70
• Good Chemical Inertness
• Electrical Insulator
• Thermal Conductor (result: better heat dissipation)
• High Temperature Stability, 1000o C in Air, 1400o C in Vacuum and 1800o C in Inert gas
• Low Thermal Expansion
• Low Dielectric Constant
• High Load bearing properties
• Non-Wetting: it is not wetted by Glasses, Salts and (most) metals, therefore it provides strong resistance to chemical attack
• Due to high temperature stability, it is used in many Aeronautic and Space applications.

Ill leave you all guessing what im awaiting to arrive on my desktop for me to play with :) ...

God I love messing with all this gear ... Oh and its 70 nm in size ... but i didn't mention that name lol.