http://www.lilireviews.com/imagens/f...ttohard_18.jpg
Show your table, mods and setups here if you're using Dimastech products :D
http://www.lilireviews.com/wp-conten...75t-ln2-01.jpg
Printable View
http://www.lilireviews.com/imagens/f...ttohard_18.jpg
Show your table, mods and setups here if you're using Dimastech products :D
http://www.lilireviews.com/wp-conten...75t-ln2-01.jpg
I have one :D
http://hardpoint.net/sites/default/f...5/SSA53677.JPG
some pictures
:D
http://img689.imageshack.us/img689/929/img1350y.jpg
http://img411.imageshack.us/img411/8778/img1384b.jpg
More pictures soon.
thanks guys for sharing...i've one too;)
http://www.pctunerup.com/up/results/...3_IMG_8826.jpg
updating with V2.5 when back to work;)
heres my baby, i have so wanted the rev1 for ages, and i finaly managed to grab one here in the UK, in mint condition.
this thread is great, it will give us all a chance to see other configs for ideas :up:
and yes that an original Thermochill PA102.3 25 mm spacing
http://img139.imageshack.us/img139/5919/19609010.jpg
http://img135.imageshack.us/img135/4563/12623720.jpg
http://img130.imageshack.us/img130/854/95456701.jpg
They look the best when properly equipped ;) (I have three)
http://imup.se/i/9DJPWp4Na3.jpg
Using it years now and stil love it :up:
http://img.photobucket.com/albums/v2...10setupair.jpg
http://img.photobucket.com/albums/v2...659venom50.jpg
http://img.photobucket.com/albums/v2...PC_setup_1.jpg
mine 24/7 :up:
http://www.abload.de/img/img_3647229v.jpg
And doing job it's supposed to do :D
http://www.abload.de/img/img_3820g0y1.jpg[LIST=1]
Can you show pics of the back so I can get an idea for spacing etc thanks.Quote:
Originally Posted by DosDuoNo
i have two :P
http://i24.photobucket.com/albums/c5...0064Medium.jpg
i've one of these benchtable 2.5 with 2x 360mm rads !
http://www.mice86.fr/dimastech%20fin...n/IMG_3756.JPG
http://www.mice86.fr/dimastech%20fin...n/IMG_3758.JPG
:D
2 years I looking this one..and get one ..Thanks to Alex " Delex " bring me amazing benchtable from Italy to Taipe when Grand Final MOA 2010
http://img541.imageshack.us/img541/1954/img2328q.jpg
http://img442.imageshack.us/img442/5456/img2330z.jpg
:slobber:
Is there anywhere to buy the short "Tray" like ones still, like in post #9, 10, and 14?
yeah here on Dimas's web site, he ships all over the world :up:Quote:
Originally Posted by Lsdmeasap
http://www.dimastech.com/EN/c/dimast...-table-hard/1/
I believe that is the "bench/test table hard"...Quote:
Originally Posted by Lsdmeasap
http://www.dimastech.it/EN/c/dimaste...est-table/t/0/
You can order it direct from DIMASTECH in Italy for 90 Euros plus 26 Euros shipping or ~ $164 (with current euro/dollar conversion rate).
Nice unit... I've been contemplating one myself for a few weeks now.
Thanks man!
Bit more than I wanted to spend, but I may still get one now that I know where to buy that style. I always thought it was just one of the first revisions or something, didn't know they were also still being sold as I used to not be able to load Dimas site.
who want beat me ? i have 5 :D
right now i am using Carboon Look Rev 2.5 amazing benchtable for testing rig :D
next week i'll show you my bench rig when new table arrive.
we want to see a pile picture then :up:
Oh you got the carbon ver? Please show lots of pics! I'm very interested in getting this one.Quote:
Originally Posted by hiwa
Very nice ! :)
Thanks dude, think I'll be getting a Carbon version then:D
DimasTech ROG EDITION :D:D
http://www.nexthardware.com/forum/ga...1_IMG_3090.jpg
http://www.nexthardware.com/forum/ga...1_IMG_3093.jpg
http://www.nexthardware.com/forum/ga...1_IMG_3096.jpg
http://www.nexthardware.com/forum/ga...1_IMG_3099.jpg
http://www.nexthardware.com/forum/ga...1_IMG_3107.jpg
next week i use it for an event in italy, more pics next week after the event :up:
hello guys,
nice to meet you .. :up:
.. I have one too!
http://img713.imageshack.us/img713/1014/dimas.jpg
Where can I mount my Reservoir at? Easy 2.5
What reservoir is it?
Very nice build man ! :)
Thanks! It's not quite as awesome as some of your builds, but it's always a work in progress :DQuote:
Originally Posted by bundymania
There is a Dima underneath all the mess somewhere :)
http://i4.photobucket.com/albums/y12...elbmw/FW02.jpg
http://i4.photobucket.com/albums/y12...elbmw/FW01.jpg
@Bundymania...
What model of bench is that??? It looks like a test table easy, but yours has triple rad cutouts, vs. only double rad cutouts on the examples on the website.
I love your build...where did you hide your pump/res?
Dimastech Bench/Test Table Easy V2.5 glossy black
http://www.aquatuning.de/product_inf...sy-black-.html
Laing Pump with XSPC Top/Res. Combo is based on the ground:
http://www.abload.de/img/img_6848huko.jpg
http://www.aquatuning.de/product_inf...pling-kit.html
Here's mine :D:D:D
http://www.abload.de/img/dsc_01231s2g.jpg
http://www.abload.de/img/dsc_0150htwi.jpg
http://www.abload.de/img/dsc_0154wskm.jpg
http://www.abload.de/img/dsc_0129otfl.jpg
http://www.abload.de/img/dsc_01364tb9.jpg
http://www.abload.de/img/dsc_01373rjl.jpg
http://www.abload.de/img/dsc_0139gqzd.jpg
http://www.abload.de/img/dsc_0142itvk.jpg
http://www.abload.de/img/dsc_0143qpm3.jpg
http://www.abload.de/img/dsc_0144dppi.jpg
piece of ART...black and red, it's very sexy combo...
Thanks man!
I'd love to close my front a bit...
http://img855.imageshack.us/img855/4959/p1030175.jpg
http://img508.imageshack.us/img508/9795/p1030181v.jpg
http://img269.imageshack.us/img269/9832/p1030194d.jpg
http://img197.imageshack.us/img197/4990/p1030196n.jpg
http://img851.imageshack.us/img851/3206/p1030201.jpg
http://img847.imageshack.us/img847/4269/p1030206.jpg
http://img189.imageshack.us/img189/2184/p1030216v.jpg
http://img685.imageshack.us/img685/655/p1030215c.jpg
:up:
ehi...very nice, we need a photographer like you...please send me a pm on how to use this pics for some nice presentation of product;)
im getting mine in a couple of days! CANT WAIT! (I DONT EVEN HAVE A SYSTEM TO PUT ON IT YET)!!!! So beautiful!
Just bought one!
*runs around like a little kid*
This thing can't get here quickly enough...
No good photos yet, but I have a few bad ones :p
http://i747.photobucket.com/albums/x...x/d8679574.jpg
http://i747.photobucket.com/albums/x...x/897b76f9.jpg
Ordered mine today. Can't wait to get it.:D
Just finished mine...
http://farm7.static.flickr.com/6010/...d1a3f909_b.jpg
http://farm7.static.flickr.com/6076/...8743fc5b_b.jpg
http://farm7.static.flickr.com/6204/...9d94cebd_b.jpg
I only have 2 things to be picky about...
1. even though its supports dual radiators, geetting everything inside with 2 rads is hard. you need to plan out everything. i planned and replanned, and built and rebuilt constantly.
2. I wish the bay holders had longer slits, so that i could slide the entire drive bay device in it.
Other than those 2 things, this wwas a BRILLIANT case.
I saw your build log over at [H] and I posted in your thread asking you about how tight it was. While it wouldn't look as clean, one option would have been to put the rads on the outside, and the fans could have been either inside, or also outside. Of course, that would have made it look a little "plump", but would have given you all the room you needed inside.Quote:
I only have 2 things to be picky about...
1. even though its supports dual radiators, geetting everything inside with 2 rads is hard. you need to plan out everything. i planned and replanned, and built and rebuilt constantly.
2. I wish the bay holders had longer slits, so that i could slide the entire drive bay device in it.
Other than those 2 things, this wwas a BRILLIANT case.
I honestly think that yours is one of the best looking Dimas tech builds I've seen (top 5 without a doubt). I really like the way you did the reservoir and the pumps/rads.
me haz one too :D
http://www.hwbox.gr/images/imagehost...85d125464a.jpg
sorry for the bad pic but its from my old HD2 :p
Another one with a bit more dust on it
http://www.hwbox.gr/images/imagehost...8b71397e5c.jpg
another one
http://www.hwbox.gr/images/imagehost...4101bbbc64.jpg
i'm waiting for some watercooling parts to refresh my WC setup and i ll post again :)
this is probably a stupid question but i'm assembling my bench right now and i can't figure out what one of the parts are... it's like a flex fan mount, but not flexable nor is it in the manual
http://img207.imageshack.us/img207/4283/1006368.jpg
is this a fan mount?
EDIT: very nice looking test table! really like black
mine :)
http://img804.imageshack.us/img804/8187/1006376f.jpg
http://img35.imageshack.us/img35/7547/1006377x.jpg
http://img35.imageshack.us/img35/7547/1006377x.jpg
this is the flexfan v2, you can place the washer in the upper part of the fan mount.
aah i see... i thought it wasn't flexible since i wasn't aware how rigid it was.. it does flex! lol :doh:Quote:
Originally Posted by Dimas
thanks!
by the way... i love your bench tables dimas! beautiful work :clap:
Finally finished my build a few days ago and managed to get a couple of pics. PC specs below. I could not be happier with the Dimastech Easy Dual v2.5. Super simple to work on and lots of options to accomodate watercooling equipment :D
There was absolutely no way I was going to be able to shoehorn the fans and radiators inside the case. Early on I decided I was mounting everything on the outside of the case, and I believe it turned out great aesthetically and functionally. I love having the Swiftech MCP35X pumps built-in to the radiators because it simplified the installation a great deal.
Currently playing Battlefield 3 at 2560x1600 on Ultra settings and this thing doesn't even break a sweat. All 6 radiator fans and the 2 Swiftech MCP35X pumps are on PWM control, which makes for an incredibly quiet machine.
PC
Case: Dimastech Easy Dual v2.5 (black)
PSU: Silverstone Strider 1500w
Mobo: ASUS Maximus IV Extreme
CPU: Intel 2600K (currently at a quick and dirty 4.8GHz overclock, still need to tweak things and see how much higher it can go)
RAM: Corsair Dominator GT (2x4GB) DDR3 2000
SSD: Intel 510 250GB
GPU1: GTX580 3GB w/ EK Backplate
GPU2: GTX580 3GB w/ EK Backplate
GPU3: GTX580 3GB w/ EK Backplate
Monitor: Dell 3008WFP
Cable Extensions: BitFenix Alchemy cables (red)
Watercooling Loop
CPU Block: EK Supreme HF Rev. 2 - Acetal
GPU Blocks: 3x EK-FC580 Acetal (connected via EK-FC Bridge Triple Parallel)
Radiators/Pumps: 2x Swiftech MCR320 Drive Rev. 2 Radiators with built in MCP35X PWM Pumps
Reservoir: EK-MultiOption RES X2 - 250 Advanced
Fans: 6x Scythe Gentle Typhoon 1850rpm
Tubing: Primochill LRT 3/8" ID--5/8" OD
Fittings: Bitspower Carbon Black Fittings (ordered these direct from Bitspower in Taiwan...was a HUGE PAIN getting them to reply to order request emails)
Coolant: Distilled Water + PT_Nuke PHN + Feser Base Corrosion Blocker
http://i21.photobucket.com/albums/b2...cooling2-1.jpg
http://i21.photobucket.com/albums/b2...Fury/WC1-1.jpg
This red/black mix looks good !
Work in progress.....
http://i.imgur.com/5MaQ6.jpg
Got mine on Friday. (Australia, Perth)
http://i12.photobucket.com/albums/a2...d/a365fcaf.jpg
http://i12.photobucket.com/albums/a2...d/aabcf63e.jpg
Looks good ! :up:
nice to see some good pics from Australia, and you've been fast on istallation ...Quote:
Originally Posted by DrEvil
Hehe thanks! I would have to admit your DimasTech bench was definitely some inspiration!Quote:
Originally Posted by bundymania
Haha thanks. Was a little anxious and ended up finishing the build earlier then expected. This bench was a breeze to assemble and was actually enjoyable. Will definitely recommend and possibly order more products from DimasTech:up:Quote:
Originally Posted by Dimas
They look like nice benches that's for sure I only just bought a DD Torture Rack (EATX version) and loving it:up:
Mine :)
Attachment 124932Attachment 124933Attachment 124934Attachment 124935
Gonna get it powdercoated when i upgrade system......thinking maybe pastel orange. Also waiting on Corsairs sleeved cables. I have sleeved extensions but theres not much room inside for psu cables let alone psu cable+extension cables.
Current set up is: MSI P55-GD80 - i5 760 @4ghz - Asus DCII GTX580 - Corsair Vengeance 1600mhz C8 - GTX360 - EX360 - AP15's - EK Blocks Nickel/Acetal - 2x D5's in Koolance RP-452X2.
Mine on the way :up:
I will post some pictures after installation complete
http://i.imgur.com/uAMFz.jpg
http://i.imgur.com/Dq3pB.jpg
http://i.imgur.com/j7IT8.jpg
still under construction. water+sleeved cables are the next tasks :)
http://i.imgur.com/k4boR.jpgQuote:
Originally Posted by Noob.com
very nice...love the white cable..look like hair..;)
A few years late but finally no more stack of mobo boxes. Lol
Been hittin' the start button million times with mobo on top of box which made the board kinda bend out. When the button started to give up this bench table make the mobo's spine straight like an arrow:D
http://img210.imageshack.us/img210/9...nshot005fv.jpg
Awesome work Dimas:up:
Attachment 128361
this is the latest version. Dumo, I'll loan you mine if you want to mount a bigger rad.
The ac unit is staying here though.
Is that the new Super-Mini "Stealth" version I've been hearing about?Quote:
Originally Posted by trans am
Awesome Pics Guys. I must upload pics from my Dimastech Benchtable
Nice bench table Dumo! I know you have more Intel stickers than that, you should be able to wallpaper your house by now:DQuote:
Originally Posted by Dumo