Corsair GTX 2 testing stage 1 X58 chipset

http://chew.ln2cooling.com/Corsair%2...orgtheader.jpg

Lets have a look at the modules

http://chew.ln2cooling.com/Corsair%20GTX2/1235541.jpg

http://chew.ln2cooling.com/Corsair%20GTX2/GTX2.jpg

So first I'd like to state that i'm preety much a nub to intel so I'm gonna keep it simple play with primary timings and see what these can do through a range of speeds.
Second I'd like to state no B2B tricks here.

The System
Intel core I7 920 DO
Corsair dominator GTX 2 3x2g CL8 2250mhz
Gigabyte EX58-UD3R
misc vidcard
Win 7 ultimate no tweaks
Custom watercooling

First up Cas 6

6-6-6 1800 1.65v
http://chew.ln2cooling.com/qdig-file...ater/lrg_3.jpg

6-6-6 1840 1.665v
http://chew.ln2cooling.com/qdig-file...ater/lrg_4.jpg

6-6-6 1850 1.71v
http://chew.ln2cooling.com/qdig-file...ater/lrg_6.jpg

6-6-6 1872 1.76v
http://chew.ln2cooling.com/qdig-file...ater/lrg_5.jpg

6-7-6 1880 1.71v
http://chew.ln2cooling.com/qdig-file...ater/lrg_7.jpg

7-7-6 1900 1.71v
http://chew.ln2cooling.com/qdig-file...ater/lrg_8.jpg

7-7-6 1950 1.71v
http://chew.ln2cooling.com/qdig-file...ater/lrg_9.jpg

7-7-6 2000 1.71v
http://chew.ln2cooling.com/qdig-file...ter/lrg_10.jpg

7-7-7 2050 1.71v
http://chew.ln2cooling.com/qdig-file...ter/lrg_11.jpg

7-8-7 2100 1.71v
http://chew.ln2cooling.com/qdig-file...ter/lrg_12.jpg

8-8-7 2150 1.665v
http://chew.ln2cooling.com/qdig-file...ter/lrg_13.jpg

8-8-8 2200 1.665v
http://chew.ln2cooling.com/qdig-file...ter/lrg_14.jpg

That concludes water testing. Unfortunately I was not able to acchive spec but that isn't corsairs fault. As you will see in stage 2 they can do spec very easily and the cpu is to blame and needs cold to scale further. I might add that while i left voltage at 1.712 for most of those runs it obviously was not necessary for the majority I just found it easier to leave voltage at what i felt was a safe operating level.


Stage 2 cold testing
The System
Intel core I7 920 DO
Corsair dominator GTX 2 3x2g CL8 2250mhz
Gigabyte EX58-UD3R
misc vidcard
Win 7 ultimate no tweaks
Custom Dry Ice Pot

http://chew.ln2cooling.com/Corsair%2...I/IMG_2409.JPG

7-7-6 2100 1.712v
http://chew.ln2cooling.com/qdig-file...0DI%202100.jpg

7-7-7 2150 1.728v
http://chew.ln2cooling.com/qdig-file...0DI%202150.jpg

7-8-7 2200 1.728v
http://chew.ln2cooling.com/qdig-file...0DI%202200.jpg

8-8-8 2350 1.665v
I was just fooling with my uncore on this one
http://chew.ln2cooling.com/qdig-file...0DI%202350.jpg

8-8-8 2400 1.712v
http://chew.ln2cooling.com/qdig-file...202400%208.jpg

That wraps it up folks, as you can see these sticks can do spec and quite a bit more. Unfortunately they won't pull spec on most cpu's due to uncore limitations at XX temps.
The sticks certainly live up to there hype and get an A+ reccomendation for the hardcore benchers that must have absolute performance under cold temp ranges. :up:
Be sure to tune back in to Stage 2 when I test potential on P55 platform :)

P55 testing
Usual disclaimer blah blah blah :p:
I'd like to state that i'm preety much a nub to intel so I'm gonna keep it simple play with primary timings and see what these can do through a range of speeds.
Second I'd like to state no B2B tricks here.

The System
Intel core I7 860 from hell
Corsair dominator GTX 2 2x2g CL8 2250mhz
Gigabyte P55-UD4P
Gigabyte 5870SOC
Win Xp mild tweaks ( LSC + theme )
Air cooled mehalems something or other heatsink with taped on fan because megahalems wants you to purchase the fan clips for wider fans. ( not as long as I have tape :rolleyes: )


http://chew.ln2cooling.com/qdig-file...d_IMG_2551.jpg

http://chew.ln2cooling.com/Corsair%2...5/IMG_2552.jpg

*Disclaimer* this cpu is horrible and has some issues and some slight burnage so if I ran clocks low it's due to cpu not capable and not the rams faults. :shrug:

1800 6-6-6 1.65v
http://chew.ln2cooling.com/qdig-file...00%206-6-6.JPG

1840 6-6-6 1.71v
http://chew.ln2cooling.com/qdig-file...40%206-6-6.JPG

1900 6-7-6 1.71v
http://chew.ln2cooling.com/qdig-file...00%206-7-6.JPG

2000 7-7-7 1.65v
http://chew.ln2cooling.com/qdig-file...00%207-7-7.jpg

2100 7-7-7 1.65v
http://chew.ln2cooling.com/qdig-file...00%207-7-7.JPG

2160 7-7-7 1.69v
http://chew.ln2cooling.com/qdig-file...60%207-7-7.JPG

2280 8-8-7 1.69v
http://chew.ln2cooling.com/qdig-file...80%208-8-7.JPG

I didn't bother with 8-8-8 seeing as 8-8-7 already surpassed spec and I hit what appeared to be the IMC limit on air.

Now just wanted to show there plenty of room for squeezing more performance and tighter timings however I like to show results that average users can acchive. That said YRMV with tighter timings.

http://chew.ln2cooling.com/Corsair%2...60%207-7-6.jpg

Stage 2 cold testing
The System
Intel core I7 860 from hell ( CBB = -50 )
Corsair dominator GTX 2 2x2g CL8 2250mhz
Gigabyte P55_UD4P
Gigabyte 5870 SOC
Win XP mild tweaks ( LSC + theme )
Ln2cooling.com cpu pot

Now this cpu is a complete turd so excuse the low clocks. Yes I tried with high clocks. Yes I tried to fry cpu with voltage. Yah preety much tried everything, can't polish a turd so here goes where we left off on air.

http://chew.ln2cooling.com/Corsair%2...5/IMG_2542.jpg

2300 8-8-7
http://chew.ln2cooling.com/Corsair%2...00%208-8-7.JPG

2350 8-8-7
http://chew.ln2cooling.com/qdig-file...50%208-8-7.JPG

2400 8-8-8
http://chew.ln2cooling.com/qdig-file...00%208-8-8.JPG


After that I played with some effeciency testing and sadly I could not get the uncore/ram speed/timings I wanted without losing a severe amount of cpu speed so I ran these 2 runs.

http://chew.ln2cooling.com/Corsair%2...20test%201.JPG

http://chew.ln2cooling.com/qdig-file...20test%202.JPG

After doing that testing I had just enough DI left for one run so I fired up my 32m Bench OS and let it rip tuned, wasn't to happy about effeciency but ehh what can you do.

http://chew.ln2cooling.com/Corsair%2...di%20tuned.JPG

That wraps up P55 testing. It was nice to acchieve rated specs on air but I'm not to thrilled with lynfield performance. The GTX2 once again lived up to specs and then some so A+ for that.
Sadly this chip was not up to the task for anything beyond 2400 ram. Thuban testing is up next be sure to tune back in :)

Reserved Stage 3 AMD

Great numbers, chew*! :up:
Any idea what chips are these?
And I have a feeling P55 platform will reveal their true potential! :D

Nice tests Brian!

Are you memtesting before you enter Windows or do you use 32M as the only stability test?

Quote:

---

Originally Posted by zalbard

Any idea what chips are these?

---

Elpida Hyper of course...

Memtest before boot.

Not tuning with cpu tweaker it's just there to show what I have set, preety much a bios guy myself.

I'm guessing they are hypers.

waiting for stage 3 as it's more important than first and second :D

I fully agree with you Chew, I had same experience with Tylersburg, only, my IMC was even worse....
Will you use Thuban for stage 3?

Nice, thorough testing, can't wait to see how Clarkbar performs with these. :)

Hey man sweet write up , keep pushing it

These sticks are extremely strong and a pleassure to bench. They works and scale well with both CL6, CL7 and CL8
which are the area you most likely play them in. Clarkbar you migth wanna go CL5 if you have CORSAIR CMGTX2 :up:

nice test Chew, waiting for next platforms :)

Just thought I'd toss this out there "unoficially".

As you can see there's quite a bit of untapped performance that I am not tuning for in the review. Subs can be tightened quite a bit more.

Air on gulftown / LSC + silver theme, no other tweaks.
http://chew.ln2cooling.com/Corsair%2...%20III%20E.JPG

well, they've really optimised CL6 on these sticks - otherwise there's no point in paying premium for gtx2 over "regular" 2000c7s ... cl7 is barely over spec of 2000c7, cl8 will be limited by the platform anyway

Hmmm I tend to disagree.....It took me 2 3x2g sets of regular GTX to make one "good" 2x2g bench set which I might add can't match these. Cost for my 2x2gig set was a tad more and i'm still short a stick for triple channel. 3rd sets the charm right ;)

stage2 and 3? ...when?

When I get back home. Far away atm.

Good stick there Brian, mine can't do TRFC 60 over +1000Mhz 32mb stable... needing 70ish level there and even 88 for 1100mhz... how you liking the REX III ? I'm more looking forward to Thuban stage :p

nice results, well worth $600 if you ask me. I love mine

was trfc on auto in the first couple SS's or did it require the bumps to maintain stability (100 to 102 to 104 etc)

Waiting for stage 3. Woot.

waintig for the 890FX results :) ordered from Nichish 3x1gb cl8 2250 mhz Kit :P

Quote:

---

Originally Posted by FatAlbert

waiting for stage 3 as it's more important than first and second :D

---

Agreed...same for me too....:D

Nice work Chew, as noted, very thorough. And yes, the GTX2s are Hypers. GTX1s are PSCs, I don't recall specifically what rev.

heh, i think, stage 3 will with Thuban :)

dude, are you done making the rest of us look slack? you dont make any friends by doing things like this! relax man ;)

bloody awesome chew!

Quote:

---

Originally Posted by Yellowbeard

Nice work Chew, as noted, very thorough. And yes, the GTX2s are Hypers. GTX1s are PSCs, I don't recall specifically what rev.

---

So there's GTX2, GTX1 and GTX or GTX1 != GT ??

Wait!
Is the the Gigabyte board I think it is..
You know what I mean!:rofl:

Quote:

---

Originally Posted by Leeghoofd

Good stick there Brian, mine can't do TRFC 60 over +1000Mhz 32mb stable... needing 70ish level there and even 88 for 1100mhz... how you liking the REX III ? I'm more looking forward to Thuban stage :p

---

Hmm loving the rex, benching like around 2150-2170 7-7-6 trfc 60 1T 32m stable with only 1.71v......maybe you just have a bad stick legghoofd.

Will post up some unnoficial runs after i get back.

Quote:

---

Originally Posted by Splave

nice results, well worth $600 if you ask me. I love mine

was trfc on auto in the first couple SS's or did it require the bumps to maintain stability (100 to 102 to 104 etc)

---

I can run at 60 until about 2200........not fond of doing reviews with results that can't be acchieved by avg joe so left auto.

Hey chew I was hoping to ask you a favor if not too much trouble. Could you run the BOINC benchmark with that memory at 1000mhz 7-7-7-20 and again at 1200mhz 8-8-8-24 same cpu speed obviously. Thanks, looking to build the ultimate cruncher and I don't know which kit to go with. I currently have the dom gt 7-8-7-20 2000mhz kit.

wow sick ram frequency man
did you run everest at 1200 mhz on memory?

Quote:

---

Originally Posted by =[PULSAR]=

Hey chew I was hoping to ask you a favor if not too much trouble. Could you run the BOINC benchmark with that memory at 1000mhz 7-7-7-20 and again at 1200mhz 8-8-8-24 same cpu speed obviously. Thanks, looking to build the ultimate cruncher and I don't know which kit to go with. I currently have the dom gt 7-8-7-20 2000mhz kit.

---

you have an imc that can do 2400 on air water for 24/7 or do you plan to run boinc 24/7 on Dry ice? :confused:

Now that would be Xtreme :lol: I'm getting some Xeon X5670's on Monday so we will just see what they can do I'm hoping they can get 2400mhz :D

i don't think that 2400 is possible on westmere, not talking about stability even

If you guys had a chance to get 6GB of these sticks for $475, would you guys do it???

I will likely be picking up another 2GB for a complete 8GB, but I figure right now this is a decent price for it.

Gonna be used for an AMD system. With memory prices the way they are I figured this was a pretty decent deal and I want to get the best for my next rig.

Quote:

---

Originally Posted by dinos22

wow sick ram frequency man
did you run everest at 1200 mhz on memory?

---

Think so but my version was old so results skewed so didn't bother posting them.

As promised a cold "tuned" run.

http://chew.ln2cooling.com/Corsair%20GTX2/32m.jpg

Quote:

---

Originally Posted by Yellowbeard

Nice work Chew, as noted, very thorough. And yes, the GTX2s are Hypers. GTX1s are PSCs, I don't recall specifically what rev.

---

7.1 & 8.1, both I believe.

efficiency looks food chew :up:
what board is that on?

R iii e

Nice job here chew*

I got mine today. First result is 1035 7-7-7-20-5-60 1T 1.65v. I love these tight timings !!!!

Page 1 post 2 P 55 results added :)

http://www.xtremesystems.org/forums/...64&postcount=2

Thuban, Thuban, Thuban!!!!

Thanks for the review on these Chew. Awesome work :)

Quote:

---

Originally Posted by runnin17

Thuban, Thuban, Thuban!!!!

Thanks for the review on these Chew. Awesome work :)

---

What you mean like this?

Just a teaser ;)

http://www.techreaction.net/2010/05/...ow-amd-no-way/

Quote:

---

Originally Posted by chew*

What you mean like this?

Just a teaser ;)

http://www.techreaction.net/2010/05/...ow-amd-no-way/

---

:shocked::shocked::shocked::shocked::shocked:

:clap::clap::clap::clap::clap::clap:

Can't wait till the Crosshair IV Extreme comes out and I get to play with my GTX2 sticks!!!!!

:worship::worship::worship::worship:

Quote:

---

Originally Posted by chew*

What you mean like this?

Just a teaser ;)

http://www.techreaction.net/2010/05/...ow-amd-no-way/

---

THuban and clarkdale has just about equally strong/weak IMC it seems :D

chew very nice DDR3-2022Mhz 6-7-6 !!

Quote:

---

Originally Posted by eva2000

chew very nice DDR3-2022Mhz 6-7-6 !!

---

Sadly it's not much good for anything but show.

Ganged is equivalent to running a B2B cas delay IMHO unless you run up to say 2100+ at 7-7-6 and even then you take hits in certain apps.

7-7-6 2000 unganged is faster than ganged 6-7-6 @ 2000 in 32m by a good 8 seconds. All that performance per clock testing stuff belongs in another thread though.

I see... one day I'll need to pick your brains when I try AM3 out again.. last AMD cpu i used was FX-60 s939 LOL

Quote:

---

Originally Posted by runnin17

:shocked::shocked::shocked::shocked::shocked:

:clap::clap::clap::clap::clap::clap:

Can't wait till the Crosshair IV Extreme comes out and I get to play with my GTX2 sticks!!!!!

:worship::worship::worship::worship:

---

Do you want Lucid ? Or is it just the Extreme name that makes the board better for you ?

Quote:

---

Originally Posted by Leeghoofd

Do you want Lucid ? Or is it just the Extreme name that makes the board better for you ?

---

Comparing the layouts of the Formula and the Extreme, I prefer the Extreme. Not to mention the power handling on the Extreme is better than the Formula from looking at the boards without their heatsinks.

Lucid is nice, so that is an added bonus; but the main reason I am waiting for the Extreme is due to the board layout and the supposed better OC'ing ability.