Printable View
3003A957, 20 liters dont last long with these chips. CBB never had to find out. CB there is none on this one...
Vant-37749
http://service.futuremark.com/compare?3dmv=2022099
http://img28.imageshack.us/img28/3489/3dmvant37749.jpg
06- 39928
http://service.futuremark.com/compare?3dm06=13532764
http://img28.imageshack.us/img28/7703/3dm0639928.jpg
05-50088
http://img28.imageshack.us/img28/9661/3dm0550088.jpg
nicely done
judging by your CPU scores you are dropping your CPU tests to what 5.4?
165 x 33 what ever that is, evbot... :up: Having trouble with the rig cutting off in the middle of benches, guess its the power supply, silverstone 1200w, I am going to try my enermax next time...Quote:
Originally Posted by dinos22
Wow!! Nicely done RR. Chalk one up to the "A's" What's up with the dual channel???
Nice numbers RR :toast:
Where did you buy it?
sweet results.
now that gulftown is here, everything else semms to be worthless to bench...
40k 06 50k 05 with 5870 cf holy.....
Very strong chip, congrats! :D
Great numbers, too! :up:
Did you use e760?
Pretty nice for a retail chip :D
Can you elaborate on this? Just a shut-down? Can you reboot instantly?Quote:
Originally Posted by road-runner
Microcenter Houston, took me about 3 hours to get it for $999...Quote:
Originally Posted by miahallen
I am not sure why it cuts off in the middle of the bench, gunslinger done the same thing with Antec 1200, it just cuts off and reboots. Last time this happened was with 2-4870x2 and I had to switch the power supply to single rail and it fixed it then.Quote:
Originally Posted by massman
Yes it reboots on its own after it cuts off, I have no cold bug on this chip... :shrug:
No coldbug, but also no OCP problem. Cut-off may be due to PSU indeed.
Good info
At the end when I was running out of LN2 I had it lock up after changing some settings and had to switch the power off, it would not start back up at -186c so I think there may be be a cold boot bug or I killed something not sure yet. :shrug:Quote:
Originally Posted by massman
Oh the board is classified E760...
How many amps are these good clockers pulling? Kind of surprising that Gunslinger is having the same issue with the Antec 1200w vanilla?
very nice chip RR:up:
I am not sure if he has the OC edition or the vanilla one, I forgot to use the kill-a-watt to see what it was pulling... :shrug:Quote:
Originally Posted by chuchnit
Gunny has the vanilla version :up: They are still supposed to be the same unit minus the variable fan and 12v control of the OC edition.
Mine is not the OC version. It results in a total shutdown, and reboot, but the temp is usually so low that it causes cbb.
When does it shut down? In between test or under load?
Mine does it under load in 06 or vantage usually in the first test about halfway through. Under 178x33 I had no problems, above I did almost everytime...
Usually happens for me under load during CPU tests, but has happened during the GT's also.
sweet...No CBB or CB? I hope she scales under LHE :D
looking good, looking good man
What VTT voltage are you running when it restarts?Quote:
Originally Posted by road-runner
I tried several from +150 - + 350Quote:
Originally Posted by raju
If changing out the PSU does not help - try lowering VTT even further; somewhere between 1.20v ~ 1.325V (I had some BF chips that would only run Vantage at these voltages).
well, not with 1.85v LOL :DQuote:
Originally Posted by road-runner
I will try that when I get some more LN2.. :shrug:Quote:
Originally Posted by raju
wow~~! great clock
What did mainboard use?
Ran a couple benches yesterday with the cascade, can only get a few runs out of it then temps drop from -99 to -83 or -84 then I have to shut it down for awhile, crank it up and get 3 or 4 more runs, rinse repeat. I will be getting some LN2 tomorrow...
http://i135.photobucket.com/albums/q...tri-185235.jpg
http://service.futuremark.com/compare?2k3=6289873
http://i135.photobucket.com/albums/q...vant-44604.jpg
http://service.futuremark.com/compare?3dmv=2049192
Got some more LN2 today, I think something got wet though, stopped and took it apart. Got an 06 score before hand though...
http://i135.photobucket.com/albums/q...dm06-41419.jpg
http://service.futuremark.com/compare?3dm06=13610744
AMAZING RETAIL GULF! Good job!
I neeed one... Sorry i WANT one :D
good job.
very nice :up:
Nice results! and great chip indeed.
This tuesday Intel will deliver me a new 980XE retial. Will test it on the campus party @ Madrid on water and maybe on LN2
will post the bench results here for LN2 with some luck +6 GHZ stabele :)
blasting speeds road! seems like a nice chip. but your cpu score in 06 is really low.. tried to crank up the uncore yet? iam getting 12500 at about 6GHz, your at almost 6.1Ghz with 10800..? only difference is that iam using 31 vs 33, and uncore 4650 vs 3600 on your chip.
i'm getting nearly 10K on cpu score @ 4750 on water, ~4000uncore,
same for vantage, i got 4400ish cpu score with the same speed as above
i guess uncore is killing his score
Killer volts :) My chip die about 1,85V :(
retail? :confused:Quote:
Originally Posted by Maggaa
Mines dead also, didnt last long...
Retail chip...
Really...what do you think killed it :confused:
I just LOL when I read that back to myself :p:
Scary, I hope I don't kill mine :-/ I cannot afford another :rolleyes:
I dont know, it just quit working... :shrug:Quote:
Originally Posted by miahallen
what was vtt?
:( sorry palQuote:
Originally Posted by road-runner
Hey guys...I just created a thread, can you please contribute:
http://www.xtremesystems.org/forums/...82#post4325482
I think voltage kill my chip.Quote:
Originally Posted by miahallen
SF3D say, dont put more than 1.85V to chip....
First session I tried up to 1.5, it died at the start of second session with 1.3Quote:
Originally Posted by Hondacity
is the socket clean? no burn mark?
Yes socket is clean and pads on cpu are clean...Quote:
Originally Posted by Hondacity
looks like retail cousins are not much tougher than ES damn
lots of Vantage CPU test will get them falling over big time after some talk with Nick about how much power draw they have at high clocks and volts....eek
bad luck about your CPUs guys :(
sorry to hear RR, kamikaze chips ftl
I had a good run of 06 going with 3 cards at 188 x 33, got to the last test and it froze starting the test, after that is was downhill from there and then no post...Quote:
Originally Posted by dinos22
oh man yeah sounds like its the same as A0s eek
Can these dead gulftowns be rma'd?
My dead retail was just approved by Intel and is on the way back :up:Quote:
Originally Posted by The Nemesis