P6t7 ws fullcover

Printable View

02-24-2010, 02:15 PM
Duniek

P6t7 ws fullcover

DISCLAIMER
On pic you can see not matched copper base on main part of block to brass top on first pci-e slot - I used final brass tops + first beta copper base (in later revisions I make almsot the same base but with curving around pci-e slot - so dont look at this)
Now I dont have much time to changing bases for crappy pics only so this is it:
ENJOY

http://img17.imageshack.us/img17/7287/15051404.jpg
http://img30.imageshack.us/img30/5562/28517501.jpg
http://img707.imageshack.us/img707/2207/35495014.jpg
02-24-2010, 02:20 PM
Boulard83

WOW !

Very nice block. Awesome job.
02-24-2010, 02:25 PM
mariop

really beautifull! How much does it weights?
02-24-2010, 02:54 PM
kinghong1970

damn D... that is one sick looking block...

but i have to ask... how much material is lost due to the odd shape?
02-24-2010, 02:59 PM
jim0ne

WOW.. that is one sweet looking block
02-24-2010, 03:09 PM
NaeKuh

Quote:

Originally Posted by kinghong1970

damn D... that is one sick looking block...

but i have to ask... how much material is lost due to the odd shape?

He is using a bridge to connect 2 large pieces into 1 larger piece.

So its not as bad as you think it would be.

OR am i not seeing this block properly?
02-24-2010, 03:10 PM
lowfat

wowza! Didn't expect to see that when coming in to this thread.
02-24-2010, 03:11 PM
affiliate13

Top work and no doubt.
02-24-2010, 03:14 PM
kinghong1970

Quote:

Originally Posted by NaeKuh

He is using a bridge to connect 2 large pieces into 1 larger piece.

So its not as bad as you think it would be.

OR am i not seeing this block properly?

yea, i see those seams...
damn, i need to swap out my contacts...
02-24-2010, 03:30 PM
Duniek

weight 1665gram (full metal) (plexi will be weight less)

about material usage
I made perfect plan and and I dont have much loses in material

from 10mm copper i i have 10x50mm small blocks (so maybe I will make small gpu ram heatsinks :P
02-24-2010, 03:41 PM
kinghong1970

like i said Duniek, i'll find you a good girl to marry to get the US citizenship... cus i'd be nice to have you in the states...

hahaha
02-24-2010, 03:45 PM
Duniek

Quote:

Originally Posted by kinghong1970

like i said Duniek, i'll find you a good girl to marry to get the US citizenship... cus i'd be nice to have you in the states...

hahaha

I am IN
srsly :p:
02-24-2010, 04:05 PM
runmc

awesome :up:
02-24-2010, 05:03 PM
Utnorris

Great as expected!
02-24-2010, 06:09 PM
xaxis

It's alive! Beautiful work man. I can't wait. :-)
02-24-2010, 06:13 PM
Kenjiwing

I love it.. you have a lot of talent.
02-24-2010, 10:33 PM
eth0s

Wow, 1665 grams is about 3.5 pounds, that is one heavy block! :eek:
02-25-2010, 01:21 AM
ViViD

:D Maybe If Want Use Heavy LN2 Pot Board Has Been Broken?
02-25-2010, 04:59 AM
maxxx

Great looking block there....
02-25-2010, 05:09 AM
TJ TRICHEESE

I want one :shocked:

very nice block :clap:
02-26-2010, 11:40 AM
Duniek

thanks guys
02-26-2010, 12:36 PM
Sadasius

Damn....Looks awesome! Definitely have some talent here!:yepp:
02-26-2010, 01:41 PM
EnJoY

Nice job, but it looks restrictive as fawk.
02-26-2010, 11:52 PM
nightsharkski

fawk
02-26-2010, 11:53 PM
nightsharkski

Duniek,can ship to SGP?
02-27-2010, 09:08 AM
Duniek

yes, no problem
02-27-2010, 02:54 PM
Jack

You should integrate the cpu as well! Then it will be completely 'clean' :)
02-27-2010, 05:18 PM
Duniek

Quote:

Originally Posted by Jack

You should integrate the cpu as well! Then it will be completely 'clean' :)

not a problem ;), possible make on request

I considered this idea but finally I made it without cpu as you can see
03-08-2010, 08:32 AM
schatterjee04

Are you serious about the cpu bit?
03-08-2010, 05:59 PM
xaxis

Integrated CPU block... hmm. That would be extremely awesome, no doubt. The problem being if you have a tendency to swap out various CPUs on a regular basis like I do, removing the entire board block just to change the CPU would be a big pain in the ass, otherwise... I would love to see it! :)

Quote:

Originally Posted by Duniek

not a problem ;), possible make on request

I considered this idea but finally I made it without cpu as you can see
03-08-2010, 06:12 PM
pizan

Hey, is there a board under that block?

Amazing job
03-08-2010, 07:13 PM
JASSAF

Quote:

Originally Posted by Duniek

not a problem ;), possible make on request

I considered this idea but finally I made it without cpu as you can see

Duniek, it requires a thick sheet plate of 9-12mms (and $$$): the height difference between the NB and CPU is 5.25mm. I have a project that I have not completed yet "triple block: sb-nb-cpu". I'am using a thick acrylic of 15mm . i havent finised yet cause i´ve been spending awfull lot of time in the Prototype CPU LGA 775-1366 and the TRIPLE RADIATOR (acrylic cover).:p:

http://img42.imageshack.us/img42/934...lemaq01.th.jpg http://img24.imageshack.us/img24/866...lemaq02.th.jpg
03-17-2010, 10:15 PM
Wezly

How do I always miss these new threads? I was wondering when this would be done!

Loving it.
03-18-2010, 02:58 AM
maxxx

Have a peek here Duniek's Build Log
03-18-2010, 05:09 AM
Duniek

http://img511.imageshack.us/img511/3762/88793676.jpg
http://img524.imageshack.us/img524/824/53781877.jpg
03-18-2010, 08:57 AM
Boulard83

This is some sweet stuff !
03-18-2010, 09:27 AM
Mongo129

that is pure :banana::banana::banana::banana:ography there :P

very very nice
03-19-2010, 10:19 AM
MUGEN02

Koolance finally finished theirs, availability is looking 3/29-4/2
http://forums.koolance.com/viewtopic...start=80#p6316
03-20-2010, 12:13 PM
Duniek

http://www.youtube.com/watch?v=IY71gnSRGW4
03-29-2010, 03:40 PM
MUGEN02

http://www.koolance.com/water-coolin...sp6t7ws_p0.jpg
Available now for $185
http://www.koolance.com/water-coolin...roduct_id=1018
03-31-2010, 07:28 AM
HOT2DR

Thats a :banana::banana::banana::banana: pipe bender.:rofl:

Kinked pipes to hard get it right.
03-31-2010, 07:38 AM
Church

whatever the effectiveness, but i have to admit, it's Bling++ :)
03-31-2010, 04:13 PM
zeroibis

I am on the verge of tears, its beautiful!!!!!!
04-04-2010, 05:51 AM
Jfwiet

Well, still waiting on mine from Duniek, been ages since I ordered and was promissed shipment.
04-08-2010, 11:18 AM
Jfwiet

Ladies and Gentlemen, we got him!

http://img263.imageshack.us/img263/6889/img7741k.jpg
04-08-2010, 11:42 AM
Tex707

@ Duniek

Have you had a chance to use a 3D scanner or a 3D coordinate measuring machine on motherboards to make a perfect-fit full cover WB?

Great work, BTW!
04-10-2010, 07:46 AM
Duniek

I have digital caliper only ;)

PS
metal-plexi version
http://omniserver.pl/duniek/FULL%20C...al-plexi/1.jpg
http://omniserver.pl/duniek/FULL%20C...al-plexi/2.jpg
http://omniserver.pl/duniek/FULL%20C...al-plexi/3.jpg
04-11-2010, 08:52 AM
Duniek

twins
http://img689.imageshack.us/img689/3608/bloki2.jpg
04-11-2010, 01:00 PM
drbhatti

wow! I wonder what this block does to flow?
04-11-2010, 02:42 PM
Erdrick1980

:shocked: very impressive block man!!! :up:
04-11-2010, 03:02 PM
Rudster816

:eek2::eek2: Id like to see the CNC machines you get to use. Im so jealous......:yepp:
04-11-2010, 03:16 PM
Boulard83

You block are insane !

very good job !
04-17-2010, 03:59 PM
Duniek

BEAT THIS :eek:
http://img709.imageshack.us/img709/2812/29539345.jpg
04-17-2010, 05:00 PM
Garrett

Any plans for delrin tops? :)
04-18-2010, 04:29 PM
laevanira417

:shocked: Great acrylic nickel plated.

It is better at all than that of koolance...
04-18-2010, 05:13 PM
gert_bobo

Quote:

Originally Posted by Duniek

BEAT THIS :eek:
http://img709.imageshack.us/img709/2812/29539345.jpg

where can i buy this :eek::shocked:
Greetz B0B0
04-19-2010, 09:03 AM
-=YoGi=-

Full bling bling looks better :P eventually it could have mixed nickel-plexi top, but in other way that earlier version.

All times are GMT -8. The time now is 12:38 AM.

XtremeSystems