Nice Kit?
Printable View
Nice Kit?
Looking forward to the tests PcCI2iminal !
:D:D:D:clap: start dude start show us some damage junior ;)
G.Skill is really on a rampage as far as DDR3-dual channel goes. In my eyes it's the best pick of manufacturer atm, usually we see the same :banana::banana::banana::banana: offered from several different companies but G.Skill really offers unique stuff from a binning/price/overclockability point of view.
Between this and G.Skill's Pi DDRII-1150 they have got to be in the very tip top of the memory market right now. I don't own a DDRIII machine but I want to see results on this stuff too so get testing buddy.
That fan cooler is nice but would be nicer to have 2x fans to cover all of the modules.
My next RAM,hope next month.
Price in Malaysia 190Euro(260USD).
Let see what they can done!
IC XDT516A3G-A Hyper or?
2400? That's sick! Hope these are going to get cold! :D
there is no such thing as XDT516AG3-A HyperQuote:
Originally Posted by stasio
these are most likely micron or samsung ... same chips as 2200 pis
Hope you can do a review of the ram using i3 clarkdale ;)
just the frequency scares.. thanks for share!
junior they need COLD :D
here is 2200 cl7 under real cold :D
http://www.xtremesystems.org/forums/...&postcount=202
new IC no have CB and bench easy @ -150
http://aphnetworks.com/reviews/g_ski...4gbpis_2x2gb/2Quote:
Originally Posted by proxis
:shrug:
PSC IC ?
I have been waiting for this for a bit now. Me likey.
Quote:
Originally Posted by hiwa
im a little busy at work but this night i will try to give some cold to them :D
and nice run bro :D
The IC
http://img338.imageshack.us/img338/5980/006xkf.jpg
2400MHz at 1.65v
http://img269.imageshack.us/img269/3672/24848017.jpg
2280Mhz at 1.65v CL6 10-6-28
http://img193.imageshack.us/img193/7168/cl6.jpg
Damn i gotta find myself a 860/870 to have fun on these p55 ram OC~!
have you tryed timings more aggressive?like cas8 or cas7?
@PcCI2iminal: How did you managed to remove the heatspreaders? There are any hidden screws behind the stickers? Thanx!
+1 ..... please share how you remove those stubborn HS :mad:Quote:
Originally Posted by Parad0x
i think this kit only work best with 860/870 like the 2200 model..Quote:
Originally Posted by dro
No any screw involved,as my P.Storm ,just slowly split heatspreaders with small screwdriver:D.Quote:
Originally Posted by Parad0x
It is basically like double sided tape, but heavy heavy duty, so you'll want to slowly split them apart. Depending on module, you may even be able to split them with your hands if you are strong enough, but otherwise a screwdriver will do, just make sure you do not damage the PCB or ICs.
Thank you
GSKILL TECH
Quote:
Originally Posted by stasio
Once removed the stock heatspreaders are reusable or the double sided tape must be replaced? Removing the HS voids the warranty? Thank you very much for your feedback. Keep up the great work you guys as for now you are king of the (memory) hill!
Quote:
Originally Posted by Parad0x
as long as the tape does not tear on get any dust you can restick it
if they know you took spreader off waranty is gone;) lol
just use a blowdrier to heat up the heatsink ;)
Nice rams... it seems G.Skill has done lots of improves lately :D Great to see everything is going faster!
The 1600MHz 7-8-7 1.35volt ECO kit is also doing great at relaxed timings :P
This was just a boot after i had Corsair GTX1 in, didnt even think it would boot, but turned out to be 32M stable, so im sure there is more left in this little ECO kit :)
http://peecee.dk/uploads/022010/G.Sk..._9-11-9-29.jpg
What other ram (hopefully cheaper) uses these XDT516A3G-A Elpida Hyper ICs?
These aren't Hyper ICs....
You mix up P/Ns and actual products. ;)
OOOOPPPSSS!!!! =)
Well ok any cheaper ram with great IC's?
the 2200 cas7 is 100$ cheaper and verry nice;)Quote:
Originally Posted by LagunaX
OK $200 at the Egg thanks...
This is where you got that BS about XDT516A3G-A Elpida Hyper from, right? Don't believe everything that's written in those reviews, those guys must have been smoking some funny stuff.
Just FYI, this is what Hyper chips look like:
http://img694.imageshack.us/img694/3...dahyper.th.jpg
What? :ROTF::ROTF::ROTF:Quote:
Originally Posted by Don_Dan
If it's really elpida hyper ICs why it will not do tRCD 8 no matter what voltages set...(except in COLD condition XD)
Right that's it Don Dan...gonna get the Cas 7 ddr3 2200 G.Skill's anyways now as soon as my q822a430 sells on ebay =)
its not elpida hypers its samsung chips
Probably, yes. :up:Quote:
Originally Posted by zsamz_
These kits look very nice. The have crazy high frequency, but I cant find it available in Asian shops:(. Anyone know where I can buy it with good price??
In Malaysia,price are arround 270USD.Quote:
Originally Posted by Kentaro
http://forum.lowyat.net/topic/636093
PSC IC 100%Quote:
Originally Posted by stasio
PSC - DDR2
http://www.hardwarecanucks.com/forum...r2-memory.html
"XDX014A3G-A" Hyper F3-19200CL9D-4GBPIS
"XDT516A3G-A" Hyper F3-17600CL7D-4GBPIS (DDR3-2200 CL7-10-10-28 1.65v)
"XDY457A3G-W" Hyper F3-16000CL9T-6GBTD (DDR3-2000 CL9-9-9-24 1.6v)
http://upic.me/t/05/dsc08770.jpghttp://upic.me/t/3k/photobyinferuinoczth.jpgphoto-by-iNFERUIN-ocz-th & me
"XDR4---A3G-A" Kingmax 2200
"XDX410A3G-W" Kingston 1333 Value Ram
"XDX---A3G-A" Kingston 1333 Value Ram
"XDT---A3G-A" F3-12800CL8D-4GBTD (not sure)
http://upic.me/t/tu/picture0051.jpg
sorry i'm newbie...
Welcome to XS and thanx for info.:up:Quote:
Originally Posted by LASeR10