CPU-Z WR by Xtremelabs.org maniacs. Crazy stuff inside

:rofl:

Finally, after countless and tens of tried cedars I managed to get some score :D

First tried some ocing of retail celery 347

D347 lapped, then IHS-removed and polished
Xtremelabs.org MAGNUM Legend Edition copper pot
DFI Lanparty UT P35-T2R
Some fast evil Nidec fans
OCZ 1GB DRAM
Radeon 7000 VE PCI
ENERMAX Revolution85+ 1250W

http://www.xdevs.com/images/ln2_cel/celrig.jpg

For temps and voltage control measurements I've used Fluke 87V, also with scope Tektronix 2246 for PWM tweaking.

Initial test on DFI P35 showed better results, than on usual P5B DLX, so i left DFI for rest of testing. On day before had tested celery and got 7.9G with lapped CPU.

To get few MHz more, decided to make some insane step forward - remove IHS from CPU. As we know, all latest Intel CPU's have soldered IHS to die with indium metal. it have +170°C melting point. IHS is quite thick, near 1.5-2mm and is bit a barrier for high-end LN2 cooling, where each degree is a need. Thanks to my cpu, it have no coldbugs even with all pot full with boiling LN2.

Removing IHS will render cpu die very sensetive to damage, and I had to manage extreme caution to put cooling flat and firmly. Die size is near 1x1 cm, not like huge i7 cores :D.

But no win for those who afraid, lets forget any risks and push silicon :yepp:
Cutted resin glue between IHS and cpu package, and started heating to +170°C with thermal-controller heating gun. Minute spent.....two....nothing happens, lid don't go....added temp to 180...nothing.....190....nothing still....at +200 CPU jumps at few cm and drops it's self on floor. Whoa? :eek:

First thought - we have another dead bug now. IHS don't go still :rofl: .
Heating again, this time fixed CPU firmly. After few secs of heating IHS drop off.

http://www.xdevs.com/images/ln2_cel/celncr.jpg

Then cleaned up rest of indium solder on CPU with sharp blade.

http://www.xdevs.com/images/ln2_cel/celnh.jpg

One more issue also arrive, head-less CPU lost it's ability to be cooled with stock coolers, because retention bracked is now higher that cpu die, and cooler will just lay on socket, w/o contact to CPU.

So I opened socket and remove bracket.

http://www.xdevs.com/images/ln2_cel/celnct.jpg

Not usual to see working system with open socket, lol :shocked:

Then time to prepared DFI mobo to go.

Before mod tried different capacitor under subzero temp, to see which work on 77K of LN2 temp, which not. Panasonic and Sanyo OSCON SEPC work good, only dropping 10-15% of it's capacity. As many of overclockes know, Volterra VRM's don't have electrolytic caps, coz of fast switch clocks. But on extreme when every uF help to keep stability, so I've added five extra caps.

http://www.xdevs.com/images/ln2_cel/dfimod1.jpg
http://www.xdevs.com/images/ln2_cel/dfimod2.jpg

After system assy spend few hours to get good settings for DFI. Those who ever oced with DFI mobos know, that there are a lot of magic bios settings, which slightly affect stability. Voltage on CPU was ramped up to maximum vid 1.6000V and offset set to +130%. This is maximum, allowed by mobo. This will result 2.12-2.15V by DMM reading on CPU caps. During boot there was quite loud swirling and whizzling sounds from DFI volterra VRM. Under this music I've started to push F7 more that human hand can survive :D On most interesting moments I've putted my nikon on tripod near rig to make photos every second, not to lost WR moment :D

As for temps, booted straight from -170°C and under windows dropped temp to lowest -186..-190° possible. more than 2kg MAGNUM pot helped much, temps was stable and I had to put LN2 not continuosly.

http://www.xdevs.com/images/ln2_cel/celbio.jpg

http://www.xdevs.com/images/ln2_cel/celln3.jpg

Have validations on 8203MHz, but CPU-Z validator don't accept them, saying File ok, but corrupted :(.

http://www.xdevs.com/images/ln2_cel/cel8203.jpg

Have photos of 8237MHz, with halted CPU :D

http://www.xdevs.com/images/ln2_cel/celhalt.jpg

Good valid still a WR :D

http://valid.canardpc.com/cache/screenshot/958990.png

In final system started to non stable boot, sometimes loosing memory, and reporting C1 on POST led. So I stopped action and disassembled rig.

http://www.xdevs.com/images/ln2_cel/celncd.jpg

Not needed parts of socket :ROTF:

http://www.xdevs.com/images/ln2_cel/celncf.jpg

Thanks to whole Xtremelabs.org team for support.
Thanks for T0lsty for LN2 supply and help with 8800GTX benchies other day.

Russian-language report about WR here :)

Grats on the WR, way to go!

Oh man that's just nasty! :shocked:
Congrats dude, you are on fire lately :D :up:

Fantastic result!! Congrats!! If nothing died maybe a second round?? :clap::clap::clap:

wow congrats 8199mhz 2.096v vcore :eek:

Good old DFI UT P35 :D

:worship::worship:

you are a master tin...excellent work

i'm surprised with the ut p35 board :up:

excellent work & great CPU

TiN my man, you simply never stop! You are SO close to 8200MHz you simply HAVE to try again, for me, come on please :D

You have definitely earned that WR m8, good job :up:

whoohooo, some true old school hard core ocing :up: :toast:
congrats on the WR!

more vcore didnt scale?
do you think the chip is fried or was the board starting to act up thanks to condensation?

Sick OC! Congrats :clap:

Wow fantastic results! Congrats:up:

Rofl, 8.2, congrats! This is really amazing, good sir! :D

Nice WR mate!

Awesome clock !

really nice !

Wow, I´m really impressed with your work, hats off and congrats! I`m surprised by the mainboard choice, too. Sooo close to a non-rejected 8,200 MHz validation... :yawn:

Next step is LHe? :D

:eek::eek:

Congrats on the WR!!!!
:clap::clap::clap:

Excellent! Very very well deserved WR. :clap:

what's the batch of that 347 ?

Very nice mods and well deserved WR:clap:

AMAZING! Awesome mods Tin :D :up:

Thanks to all, friends.

Quote:

---

what's the batch of that 347 ?

---

Who knows :D Lapped it first day after buy. Even nonlapped markings are almost invisible.

That looks like lots of fun. Way to go friend. :up:

by far the most well earned 8+GHz and WR I have ever seen.

Respect man:bows:

That is pretty damned amazing. Congrats on WR!

very nice brother..congrats

Excellent very nice mod. CPUZ WR1

thats totaly sick . Congrats :up:

Good effort and a well deserved golden cup !!

awesome mods and one of the most deserving WR's, infact we should have more logs like these for other WR's as well.....

LOL Exellent WR TiN !!
Your threads are allways fun to see :)

:clap::clap:
amazing work and result :D

congrats on WR

congrats, excellent job :up:

I think DFI p35 UT is the best mobo for s775

nicely done :D

conrats, man

Congratz! And at least, you passed 8,2GHz =]

Good job! Congratz

Congrats for this very well deserved WR! :clap:

Quote:

---

Originally Posted by TiN_EOF

:rofl:

Finally, after countless and tens of tried cedars I managed to get some score :D

---

How many, approximately? :)

Gautam, 20 to 40 i think. Lost counting after first ten :D

Thanks to all :)

Very nice WR ! Deserved as well.

Too bad for 8.2+Ghz validation..

Congrat. on new WR

Awesome! Nice job. :shocked:

freaking amazing, when yang broke it a few months back i thought that one would stand as long the previous, congrats on the WR!

MAJOR PROPS! :up: :up:

Brutal!

absolutely nice done!

well deserved WR, hahaha u are lucky cuz u dont kill the CPU after IHS Removal

congratulations for this awesome achivement :clap:

very nice friend..
;)

rofl@xbitlabs... :lol:

Quote:

---

Unfortunately, the overclockers did not run a set of benchmarks to find out actual performance of the extremely overclocked Celeron D 347. As a result, it is not known whether the chip at 8.20GHz can actually outperform modern Intel Core i7 microprocessors at around 3.00GHz.

---

yeah, sure! a castrated netburst super low ipc cualcore chip with close to no cache at all would be very close performance of a core i7, high ipc quadcore 8 thread cpu... :rolleyes:

OMFG, hilarious :rofl: :rofl:

I'm sure that it would match a 3GHz Core i7 if clocked properly... to 30GHz :p:

Hah the Hexus article about this this showed up on Reddit. I'm d3r3k1449 btw.

http://www.reddit.com/r/geek/comment...l_celeron_cpu/

i have just seen that, really good especially work on ihs removal :up:

Crazy stuff inside indeed TiN :up:
It's funny how there are still segments of the enthusiast PC community that still don't get overclocking :D

Sweeeet WR Score :up:
Any Pic's of it Blowing up ?

Awesome run bro ... never seen anything like your work before ... mind boggling :)

Quote:

---

Any Pic's of it Blowing up ?

---

No, i didn't even expect this to happen :)

Thanks to all , guys :)