-
DimasTech Bench Tables V2.5
Hello Guys, after long time, we're about to lounch the new V2.5, this version have all the features of the V2.0, together with the Easy V2.5 we will be launching also the Hard V2.5, completely matching the Easy V2.5 new table.
Here Below the Final Revision of Table Easy V2.5, this is the Standard Version, no customization, all the accessory like USB cable, FlexFan or other things are adding parts;)
Bench Table Easy V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions
-Tipical U bend shape, 90 degrees round corner
-down tray now have a sledge and the fasteners are thumbscrews
-positioning of the support for optical and Hd on Slot, not just on holes
-lateral customization with the name of the product "DimasTech V2.5"
-Compatibility with all the radiators on market(hwlabs, thermochill, tfc, ecc...ecc...)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-4 hard disk support, 3,5"
-3 optical drive , 5,25"
-new slot for cable passing
-custom cut on the back saying "MADE IN ITALY"
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Hard V2.5
-4 back holes for water cooling tube passing or for waterccoling fittings
-new Power On and Reset Button "P" and "R" with red and black shrink cables
-USB front Port for Single Pen Drive, very usefull for saving screenshots and no boring about find the Rear USB ports (USB Cable is an Accessory)
-Male - Female spacers, no more need of screw for the motherboard Spacers
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5 (more news on this accessories in next week)
-XL-ATX vga support available as accessory (10 slots)
http://forum.nexthardware.com/galler...1_DSC_0274.jpg http://forum.nexthardware.com/galler...3_DSC_0092.jpg http://forum.nexthardware.com/galler...1_DSC_0095.jpg http://forum.nexthardware.com/galler...4_DSC_0096.jpg http://forum.nexthardware.com/galler...1_DSC_0098.jpg http://forum.nexthardware.com/galler...1_DSC_0099.jpg http://forum.nexthardware.com/galler...3_DSC_0101.jpg http://forum.nexthardware.com/galler...2_DSC_0105.jpg http://forum.nexthardware.com/galler...2_DSC_0107.jpg http://forum.nexthardware.com/galler...2_DSC_0110.jpg http://forum.nexthardware.com/galler...1_DSC_0111.jpg http://forum.nexthardware.com/galler...3_DSC_0113.jpg
Hardware Assembled Air Cooling, Only USB CABLE accessory
http://forum.nexthardware.com/galler...1_DSC_0069.jpg http://forum.nexthardware.com/galler...1_DSC_0074.jpg http://forum.nexthardware.com/galler...1_DSC_0079.jpg http://forum.nexthardware.com/galler...1_DSC_0085.jpg http://forum.nexthardware.com/galler...2_DSC_0089.jpg http://forum.nexthardware.com/galler...1_DSC_0090.jpg http://forum.nexthardware.com/galler...3_DSC_0091.jpg
Bench Table Easy V2.5 Manual ENGLISH/AMERICAN
Developing Pics, preseries and parts not assembled, packaging sample and FlexFan first try
Bench Table Easy V2.5 Develop Pics
http://forum.nexthardware.com/galler...1_DSC_0088.jpg http://forum.nexthardware.com/galler...1_DSC_0091.jpg http://forum.nexthardware.com/galler...1_DSC_0092.jpg http://forum.nexthardware.com/galler...1_DSC_0096.jpghttp://forum.nexthardware.com/galler...1_DSC_0100.jpg http://forum.nexthardware.com/galler...1_DSC_0101.jpg http://forum.nexthardware.com/galler...1_DSC_0102.jpg http://forum.nexthardware.com/galler...1_DSC_0104.jpghttp://forum.nexthardware.com/galler...1_DSC_0106.jpg http://forum.nexthardware.com/galler...1_DSC_0109.jpg http://forum.nexthardware.com/galler...1_DSC_0110.jpg http://forum.nexthardware.com/galler...1_DSC_0112.jpghttp://forum.nexthardware.com/galler...1_DSC_0113.jpg http://forum.nexthardware.com/galler...1_DSC_0115.jpg http://forum.nexthardware.com/galler...1_DSC_0116.jpg http://forum.nexthardware.com/galler...1_DSC_0118.jpg http://forum.nexthardware.com/galler...1_DSC_0120.jpghttp://forum.nexthardware.com/galler...1_DSC_0121.jpg http://forum.nexthardware.com/galler...1_DSC_0123.jpg http://forum.nexthardware.com/galler...1_DSC_0124.jpg http://forum.nexthardware.com/galler...1_DSC_0127.jpg http://forum.nexthardware.com/galler...1_DSC_0130.jpghttp://forum.nexthardware.com/galler...1_DSC_0131.jpg http://forum.nexthardware.com/galler...1_DSC_0133.jpg http://forum.nexthardware.com/galler...1_DSC_0135.jpg http://forum.nexthardware.com/galler...1_DSC_0138.jpghttp://forum.nexthardware.com/galler...1_DSC_0140.jpg http://forum.nexthardware.com/galler...1_DSC_0141.jpg http://forum.nexthardware.com/galler...1_DSC_0143.jpg http://forum.nexthardware.com/galler...1_DSC_0144.jpg http://forum.nexthardware.com/galler...1_DSC_0145.jpg http://forum.nexthardware.com/galler...1_DSC_0146.jpg http://forum.nexthardware.com/galler...1_DSC_0152.jpg http://forum.nexthardware.com/galler...1_DSC_0156.jpg http://forum.nexthardware.com/galler...1_DSC_0157.jpg http://forum.nexthardware.com/galler...1_DSC_0158.jpg http://forum.nexthardware.com/galler...1_DSC_0160.jpg http://forum.nexthardware.com/galler...1_DSC_0161.jpg http://forum.nexthardware.com/galler...1_DSC_0162.jpg http://forum.nexthardware.com/galler...1_DSC_0165.jpg http://forum.nexthardware.com/galler...1_DSC_0170.jpg http://forum.nexthardware.com/galler...1_DSC_0171.jpg http://forum.nexthardware.com/galler...1_DSC_0174.jpg http://forum.nexthardware.com/galler...1_DSC_0175.jpg http://forum.nexthardware.com/galler...1_DSC_0175.jpg http://forum.nexthardware.com/galler...1_DSC_0182.jpg http://forum.nexthardware.com/galler...1_DSC_0183.jpg http://forum.nexthardware.com/galler...1_DSC_0184.jpg http://forum.nexthardware.com/galler...1_DSC_0185.jpg http://forum.nexthardware.com/galler...1_DSC_0187.jpg http://forum.nexthardware.com/galler...1_DSC_0189.jpg http://forum.nexthardware.com/galler...1_DSC_0191.jpg http://forum.nexthardware.com/galler...1_DSC_0194.jpg http://forum.nexthardware.com/galler...1_DSC_0198.jpg http://forum.nexthardware.com/galler...2_DSC_0100.jpg http://forum.nexthardware.com/galler...2_DSC_0101.jpg http://forum.nexthardware.com/galler...1_DSC_0105.jpg http://forum.nexthardware.com/galler...1_DSC_0107.jpg http://forum.nexthardware.com/galler...2_DSC_0113.jpg
-
Bench Table Hard V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions and perfect matching the new Bench Table Easy V2.5 ( bench Table Easy + Bench Table Hard = EasyHard bench Table)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-new slot for cable passing
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Easy V2.5
-redesigned Arch-Press to be more easy to fix and easy to screw pots or other cooling device to CPU
-Male - Female spacers, no more need of screw for the motherboard Spacers
-Bachelite Handles
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5
-XL-ATX vga support available as accessory (10 slots)
http://forum.nexthardware.com/galler...1_DSC_0168.jpg http://forum.nexthardware.com/galler...2_DSC_0171.jpg http://forum.nexthardware.com/galler...1_DSC_0172.jpg http://forum.nexthardware.com/galler...2_DSC_0175.jpg http://forum.nexthardware.com/galler...1_DSC_0176.jpg http://forum.nexthardware.com/galler...1_DSC_0180.jpg
Hardware Assembled Air Cooling, No Accessory
http://forum.nexthardware.com/galler...1_DSC_0114.jpg http://forum.nexthardware.com/galler...2_DSC_0118.jpg http://forum.nexthardware.com/galler...1_DSC_0119.jpg
-
From the Fusion of Bench Table Easy and Bench Table Hard, born EasyHard, this 2 bench tables can be used together or separate, it perfectly match through rubber feet and special screw on the top of Bench Table Easy, with that setup the Hard Bench Table can't move in any direction, like the older bench table.
Bench Table EasyHard V2.5 Specifications
hard part
-Single Model available, this model will cover all the old V2 versions and perfect matching the new Bench Table Easy V2.5 ( bench Table Easy + Bench Table Hard = EasyHard bench Table)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-new slot for cable passing
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Easy V2.5
-redesigned Arch-Press to be more easy to fix and easy to screw pots or other cooling device to CPU
-Male - Female spacers, no more need of screw for the motherboard Spacers
-Bachelite Handles
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5
-XL-ATX vga support available as accessory (10 slots)
easy part
Bench Table Easy V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions
-Tipical U bend shape, 90 degrees round corner
-down tray now have a sledge and the fasteners are thumbscrews
-positioning of the support for optical and Hd on Slot, not just on holes
-lateral customization with the name of the product "DimasTech V2.5"
-Compatibility with all the radiators on market(hwlabs, thermochill, tfc, ecc...ecc...)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-4 hard disk support, 3,5"
-3 optical drive , 5,25"
-new slot for cable passing
-custom cut on the back saying "MADE IN ITALY"
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Hard V2.5
-4 back holes for water cooling tube passing or for waterccoling fittings
-new Power On and Reset Button "P" and "R" with red and black shrink cables
-USB front Port for Single Pen Drive, very usefull for saving screenshots and no boring about find the Rear USB ports (USB Cable is an Accessory)
-Male - Female spacers, no more need of screw for the motherboard Spacers
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5 (more news on this accessories in next week)
-XL-ATX vga support available as accessory (10 slots)
http://forum.nexthardware.com/galler...1_DSC_0181.jpg http://forum.nexthardware.com/galler...2_DSC_0182.jpg http://forum.nexthardware.com/galler...2_DSC_0183.jpg http://forum.nexthardware.com/galler...2_DSC_0184.jpg http://forum.nexthardware.com/galler...2_DSC_0189.jpg http://forum.nexthardware.com/galler...1_DSC_0192.jpghttp://forum.nexthardware.com/galler...2_DSC_0138.jpg http://forum.nexthardware.com/galler...2_DSC_0141.jpg http://forum.nexthardware.com/galler...2_DSC_0145.jpg
Hardware Assembled Air Cooling, No Accessory, only Usb Cable for Easy Part
http://forum.nexthardware.com/galler...2_DSC_0160.jpg http://forum.nexthardware.com/galler...2_DSC_0161.jpg http://forum.nexthardware.com/galler...1_DSC_0163.jpg http://forum.nexthardware.com/galler...1_DSC_0164.jpg http://forum.nexthardware.com/galler...1_DSC_0167.jpg http://forum.nexthardware.com/galler...2_DSC_0165.jpg
-
Hello Dimas
Thanks for your response ! Can't wait to get one :D
-
Just in time as I am looking to buy one....
Can you do shipping to the us? When will they be available for order?
steponz
-
Quote:
Originally Posted by
steponz
Just in time as I am looking to buy one....
Can you do shipping to the us? When will they be available for order?
steponz
this new Benchtable will be available in january, picture updated...tomorrow explanation of all the new features in pics;)
-
That is beautiful execution :D Excellent attention to detail, you've worked hard on this and it shows
:toast:
-
Fantastic packaging !
I like the flexfan, no more hand tools :up:
I need one metal grey :D
-
-
Looks great! what colors will be available?
-
-
OMG !!! Excellent ! I want one !!!
-
nice improvement you get there , you solved the minor issue of the 2.0 rev. Now it looks like really promising to use ........
-
Now that IS what i need , lets hope Holland has one somewhere :p:
looking good bro..
-
-
Thanks Guys for nice comments, this is just a preserie sample to check if misurements are ok, as told on first thread there's still some thing to fix,just some holes and final revision of FlexFan, the packaging too now is a better experience than removing loads of polifoam snow;)
Quote:
Originally Posted by
steponz
Just in time as I am looking to buy one....
Can you do shipping to the us? When will they be available for order?
steponz
yes, is possible to ship to the US;)
Quote:
Originally Posted by
Darth_Penguin
Looks great! what colors will be available?
the colors always available will be black glossy, white milk and metal grey, all the other Ral colors will be on request, with at least 5-6 working days of delay.
Quote:
Originally Posted by
Gizb0
Price+taxes?
Prices are not yet Final, we will be sending a Press Release when final revision will be Ok, i think in 1 week everything will be showed;)
-
Very nice. I have an i7 rig that needs a home. This just might be it.
-
very nice what are the dimensions though i have an idea involving a mountain mods pedestal ;) and more cooling potential by using the pedestal to
-
Nice bench table, probably the one for EVGA dual socket XL-ATX monster :D
-
Hello Dimas!
I have a question, what's up with the bad availability in Europe? I was about to order one from www.aquatuning.de but suddenly they had no Dimas products and their response was that they are waiting for new stock which will arrive in April? Is this really correct or is that so far away date a mistake on their part? :shrug: Do you know of any other European retailer that has your benchtables for sale, if not I have to start looking for other options :(
-
Quote:
Originally Posted by
pingpong1455
very nice what are the dimensions though i have an idea involving a mountain mods pedestal ;) and more cooling potential by using the pedestal to
the dimensions are 450L x 440D x 220H mm included motherboards 25mm spacers;)
Quote:
Originally Posted by
Smartidiot89
Hello Dimas!
I have a question, what's up with the bad availability in Europe? I was about to order one from
www.aquatuning.de but suddenly they had no Dimas products and their response was that they are waiting for
new stock which will arrive in April? Is this really correct or is that so far away date a mistake on their part? :shrug: Do you know of any other European retailer that has your benchtables for sale, if not I have to start looking for other options :(
Hello, thanks for your questions, there was big problems in the start of the new company i'm in, this table V2.5 should have come 5 months ago, but all the delay of the beginning of new company help to let delay all the products launch.
actually this Bench Table is not in stock, as said in the first post, this is a preseries model to test packaging and screws matching,ecc...ecc...
the production is running now, and we're expecting to have this product on shops for first 2 weeks of febrary.
hope you can wait;)
-
Very Cool....I really want that bench table but very hard looking....:(:(
-
Quote:
Originally Posted by
Dimas
Hello, thanks for your questions, there was big problems in the start of the new company i'm in, this table V2.5 should have come 5 months ago, but all the delay of the beginning of new company help to let delay all the products launch.
actually this Bench Table is not in stock, as said in the first post, this is a preseries model to test packaging and screws matching,ecc...ecc...
the production is running now, and we're expecting to have this product on shops for first 2 weeks of febrary.
hope you can wait;)
I was talking about your older DimasTech offering which were up at aquatuning before but then suddenly disappeared... But this V2.5 looks very good and I can hold in my frustration till February:rofl:
Can you say anything about pricings? I know the one I was aiming for at aquating was either 99€ or 109€.
-
picture updated on the first post, added the new Push buttons for Reset and Power ON;)
-
Very nice Andrea :) I love it!
-
Sweet! I will be on for one Glossy Black!
-
Quote:
Originally Posted by
Smartidiot89
I was talking about your older DimasTech offering which were up at aquatuning before but then suddenly disappeared... But this V2.5 looks very good and I can hold in my frustration till February:rofl:
Can you say anything about pricings? I know the one I was aiming for at aquating was either 99€ or 109€.
that was the old revision V2, it runs out of stock pretty fast and we cant' produce anymore in the situation we was, but now we get on new way,and after lot of difficulties we will be showing also some other interesting product for enthusiast and non, market;)
about prices, i think we're about to stay in the same range of the previus V2, but this version got lot more a parts, and different quality too.
Quote:
Originally Posted by
Unseen
Very nice Andrea :) I love it!
thanks Christos...long time no seeing you, hope all is well;)
-
WOW! Beautiful stuff there Andrea...looking forward to it :toast:
-
Very intresting... curious about pricing and shipping to the US.
Can't wait to see more pics :up:
-
Finally a packaging that matches the benchtable :up:
-
-
Quote:
Originally Posted by
skinnee
Looks good Dimas! :up:
thanks to everyone, we're very near to final, there's some little thing to arrive and than we're ready:
-custom foot to be hand mounted with male thread
-final version of FlexFan available for 120x120 and 92x92 fans
-last adjustment to bench table tray and base, to fit USB cable on front, and to let a PSU stay also on front together with HD and Optical drive Rack.
-
I had to go and look at the old topic to see all the changes. The changes really do work well. So how soon till the final version is out on sale?
-
Quote:
Originally Posted by
Tetrafluorometh
I had to go and look at the old topic to see all the changes. The changes really do work well. So how soon till the final version is out on sale?
from manifacturer timing, i think that for end of january, begin of febrary table will be ready, and also the FlexFan in the 120x120 and 92x92 edition.
you're right, it's better to report also old thread to show improvements;)
http://www.xtremesystems.org/forums/...d.php?t=183287
-
Looking forward to more pics :)
-
Quote:
Originally Posted by
Dimas
that was the old revision V2, it runs out of stock pretty fast and we cant' produce anymore in the situation we was, but now we get on new way,and after lot of difficulties we will be showing also some other interesting product for enthusiast and non, market;)
about prices, i think we're about to stay in the same range of the previus V2, but this version got lot more a parts, and different quality too.
About the same sounds good to me, sounds like a solid buy :up:
-
nice work, I wish for this one for my hardware!
-
Quote:
Originally Posted by
LeandroJVarini
nice work, I wish for this one for my hardware!
thanks;)
finally FlexFan arms has come, waiting just for final support to get painted and i'll show pics of FlexFan120 ready for use,on the table.
-
If you can ship to usa, if assume you can ship to canada also right ?, i would really like one of those. My cheap antec 200 is starting to annoy me, having always problem to reach stuff and poor airflow even with some good fans.
-
Ditto. When you get NA distribution sorted let us know. Im in for 1 table. :cool:
Have you approached any North American retailers like NCIX or Newegg? They already stock bench tables, they just suck compared to yours.
Quote:
Originally Posted by
snoro
If you can ship to usa, if assume you can ship to canada also right ?, i would really like one of those. My cheap antec 200 is starting to annoy me, having always problem to reach stuff and poor airflow even with some good fans.
ps - I love the flex fan add on. How many of those can you attach? Can you do 120mm?
-
I'm waiting, I need a classified to evga 4 way!
-
Quote:
Originally Posted by
Eldonko
Ditto. When you get NA distribution sorted let us know. Im in for 1 table. :cool:
Have you approached any North American retailers like NCIX or Newegg? They already stock bench tables, they just suck compared to yours.
ps - I love the flex fan add on. How many of those can you attach? Can you do 120mm?
Thanks again to All, i'm very glad to hear all that nice comments;)
we're still working on, but some happen...still have to define some particular...
about the FlexFan, it can be mounted on 8 different holes around motherboard,just screw the arm through threaded holes, or else it can be fixed with a knurled Nut on the usual old fans support holes.
The FlexFan is an accessory but in the packaging can fit 3 pieces.
-
Quote:
Originally Posted by
LeandroJVarini
I'm waiting, I need a classified to evga 4 way!
it can fit:)
-
Quick question... all the color options as the previous Dimas benchtables? :D
-
Quote:
Originally Posted by
Dimas
the colors always available will be black glossy, white milk and metal grey, all the other Ral colors will be on request, with at least 5-6 working days of delay.
Quote:
Originally Posted by
skinnee
Quick question... all the color options as the previous Dimas benchtables? :D
I had the same question too, but it has been answered already! ;)
By the way, nice work Dimas! :up:
-
We need information about pricings! :D
Also there is a swedish retailer doing abit of niche-marketing when it comes to hardware who specify on enthusiasts called www.indomo.se (former gtek) I am sure if you contact them they will be interested and you'll get sales from quite a few happy swedes :D
-
Quote:
Originally Posted by
Smartidiot89
We need information about pricings! :D
Also there is a swedish retailer doing abit of niche-marketing when it comes to hardware who specify on enthusiasts called
www.indomo.se (former gtek) I am sure if you contact them they will be interested and you'll get sales from quite a few happy swedes :D
thanks for suggestion, i'll surely ask to that guys;)
well...in there we can't talk about prices, my collegue will be sending a "press release" for next week to IT sites, so please check for that;)
-
Quote:
Originally Posted by
Dimas
thanks for suggestion, i'll surely ask to that guys;)
well...in there we can't talk about prices, my collegue will be sending a "press release" for next week to IT sites, so please check for that;)
we're late on press release...soon to come also AntiDust Cover for when table is not in use and FlexFan final edition for 92x92 and 120x120
http://forum.nexthardware.com/galler...1_DSC_0086.jpg
http://forum.nexthardware.com/galler...1_DSC_0089.jpg
http://forum.nexthardware.com/galler...3_DSC_0096.jpg
http://forum.nexthardware.com/galler..._0067A__1_.jpg
http://forum.nexthardware.com/galler..._0067A__2_.jpg
http://forum.nexthardware.com/galler..._0067A__4_.jpg
FlexFan120 mounted on old V2 Easy Benchtable
feet are coming too...
http://forum.nexthardware.com/galler...ino_sample.jpg
NBR material antivibration with M4 thread to Hand fix on the bottom of table;)
-
Quote:
Originally Posted by
Don_Dan
Quote:
Originally Posted by
skinnee
Quick question... all the color options as the previous Dimas benchtables? :D
Quote:
Originally Posted by
Don_Dan
I had the same question too, but it has been answered already! ;)
By the way, nice work Dimas! :up:
doh, my bad. :p:
-
some news from AntiDust Cover...it's about to be ready, but they go wrong with Logo positioning...:D
http://forum.nexthardware.com/galler...idust_try1.jpg
http://forum.nexthardware.com/galler...idust_try2.jpg
http://forum.nexthardware.com/galler...idust_try3.jpg
dimensions are 450x450x450mm and fits on easy and hard V2.5 tables, material is polypropylene fiber, it's enviromentaly friendly and not woven;)
it have to be used only when computer is OFF...:D
-
friend, how are you going to model for classified 4 way?
-
Quote:
Originally Posted by
LeandroJVarini
friend, how are you going to model for classified 4 way?
in the incoming final revision there are 3 adding holes for the left side of the table, where to put adding spacers.
as accessory will be available also a 10 slot vga support;)
-
Absolutely nice work mate! Cant wait that i get one of those!:up:
-
very good, I can not wait to be able to buy mine!
nice work!!!!
-
Quote:
Originally Posted by
Asmola
Absolutely nice work mate! Cant wait that i get one of those!:up:
thanks for nice comments...
finally right AntiDust cover arrives...pics later;)
-
Final Version of Table is coming tomorrow, i'll be taking some more pics and mounting guide;)
Please if someone got some interesting accessory or feature to add, it's wellcome;)
-
Quote:
Originally Posted by
Dimas
Final Version of Table is coming tomorrow, i'll be taking some more pics and mounting guide;)
Please if someone got some interesting accessory or feature to add, it's wellcome;)
Good news :up:
-
Quote:
Originally Posted by
Dimas
Final Version of Table is coming tomorrow, i'll be taking some more pics and mounting guide;)
Please if someone got some interesting accessory or feature to add, it's wellcome;)
can't wait to see the final pics :up:
-
Looks awesome Andrea, glad to hear you can ship to Canada now! Once you get the final pics up and shipping prices finalized I'll make an order.
-
Man I love your tables. Wish you had one not so big though. Looking for one to just fit my mobo with the psu underneath. Any plans on down the line of making a smaller one?
-
Quote:
Originally Posted by
drnip
Man I love your tables. Wish you had one not so big though. Looking for one to just fit my mobo with the psu underneath. Any plans on down the line of making a smaller one?
it can be done, but it depends on the request...and also about design, if you have any idea, send me a pm, we can work out something;)
receiving the parts today from Painting Company, about the XL-ATX compatibility, in the standard table there're holes to fit the motherboard, the 10 slot expansion card support will be an adding optional,couse i dont' think everybody around there will have a xl-atx motherboards.
-
I am impatient to test this table :D
-
Hehe so do i :D
Salut CornerJack
-
I can not wait for version XL-ATX out to buy mine!
-
Order OTW, will post some pics when I get it :)
-
For those of you who've ordered it, remember pics or it didn't happen ;)
-
Quote:
Originally Posted by
Smartidiot89
For those of you who've ordered it, remember pics or it didn't happen ;)
sorry Guys, it's 3 days that i'm on Flu...today i had time to take first pics of final revision also if i was ill, that will be on selling from Tomorrow.
for who want to have price, please use the PM.
http://forum.nexthardware.com/galler...1_DSC_0274.jpg
can't show what there's underwear until tomorrow:D
-
Italian quality and innovation from its best :up:
Hoe you will recover asap ..
keep designing it
-
updating pics on first page...it will take some time;)
-
FANTASTIC ! that's the one i ordered :up:
-
Updating Finished and also more pics in less space, in order to finish the other pics, we've still to add:
Hard V2.5 pics, naked and hardware on
EasyHard V2.5, naked and hardware on
Easy V2.5+ FlexFan accessories and also the other Versions and colors;)
-
Whoo hoo that looks awesome, cant wait till mine gets here!
-
-
shipped too :D
Pictures soon
-
we're preparing the manuals, but i've a question for all guys here, do you think it's inteligent thing to show how to mount also watercooling setup in a Manual, or you think it can be leave as a "FreeStyle" work...?
-
imo
freestyle. These people who are buying your bench table know what are they buying and what for.
ps
show hard version with hardware please ;)
-
I think it would be nice to include a basic water setup guide in the manual for the noobs (like me, or those who arent creative enough).
-
I really think it's a good thing to integrate a " how to " for a watercooling setup, don't know if all here are hardcore benchmarkers and have the habit to mount watercooling or not, well perhaps on xtremesystem :p: but i do believe that bench tables are becoming more popular these days and some users just like to have it as a regular " case ".
Most of cases require to be quite of a handy man if you want to go watercooling, no specific holes for radiator, pump, reservoir.
The Dimastech bench table is a " ready to go " for a watercooling setup, for all novices i think it must have a mount guide for a basic watercooling setup . :yepp:
-
I think a photo of an H20 setup would suffice. We can figure it out from there..
-
so...let's say a simple "guide" with Simple watercooling setup.
Uploaded New pictures of Hard V2.5, naked and hardware on.
-
Andrea have you considered selling a basic version of the hard table for owners of the easy? I mean someone that has easy table would only really need the platform and arc press from hard since all the brackets and such are already with easy table. Or would they not fit on hard?
-
Quote:
Originally Posted by
Eldonko
Andrea have you considered selling a basic version of the hard table for owners of the easy? I mean someone that has easy table would only really need the platform and arc press from hard since all the brackets and such are already with easy table. Or would they not fit on hard?
yes basicly it can be done, i'll ask my colleague to insert a Hard Basic in catalogue to satisfy this need, just Hard Table + Arch Press;)
-
Excellent, I may grab that in the future since Ill have the easy already.
-
Wahoo....just ordered mine. :) Excellent job on these Andrea, and thanks for the help on the color scheme / finish I was looking for. I'll definitely post some pics up when it arrives.
-
Dimas, could you send prices on pm ?
-
Quote:
Originally Posted by
3Tripnip
Wahoo....just ordered mine. :) Excellent job on these Andrea, and thanks for the help on the color scheme / finish I was looking for. I'll definitely post some pics up when it arrives.
The matt colors can be available, the painting facility just confirm is possible, showing pics here too...
-
just added pictures of EasyHard V2.5 Bench Table, only thing left now is an accessory show down...
-
-
Dimas, send me the values of a classified 4 way sli in my email!
ljvhot (@) hotmail.com
-
Looks good yogaxl. You are lucky mine is probably on some boat crossing the ocean lol
-
Beautiful yogaxl :up: .... Can't wait to put an order in soon.
-
IMPORTANT NOTICE
to all the guys that have been taking the FlexFan chrome or Black, please take care when screwing into the bench table, the Thread is very thin ( becouse there can be a possibility to run a cuble into the Flex ARM) and if tightened too much the male thread can broke, so please put very attention when tightening, or else is possible to use the FlexFan on the normal fan fixing slot, in this kind of method using a thumbNuts is very difficult to broke.
attaching pics later today for explanation
-
-
Very nice CornerJack, looks great. :)
Still waiting for mine
-
Dimas, send me the values of a classified 4 way sli in my email!
ljvhot (@) hotmail.com
-
Still waiting for mine too.....
-
sorry guys for late..but we've been 6 days without internet/voice line...we're solving all back orders in today and working week end too;)
-
-
nice work dimas..i'll post my 2.5 when i receive it :D
-
Quote:
Originally Posted by
Dimas
Dimas - Does the Matt finish cost more than the regular gloss finish? I'm really liking the no finger print possibility :up:
