Printable View
easy start with safe voltage levels:
http://img.techpowerup.org/091204/960-1200GPs.png
coming up next from the SF3D OC dungeon:
- LN2 tests with C3 965BE
- 5970 with more exotic cooling
- 4GPUs?
- decent 3DM03 and Vantage Xtreme scores?
CPU pot is installed, time to fire things up now! :shocked:
Give it hell Sami and good luck guys :up:
nice on start Sami Macci..:up:
eheh!!! is dangerus configuration for benching :D:D
Great start Sami and brake new AMD barrier :up:
nice start man, hope to recieve my vga soon
Sami's back :D
We'll be waiting ( patiently ? :D ).
2 of them and 6500 2K5 should be a real DAMAGE :D on AMD setup
Great start sami, want to see more ;)
Great our old petri man :D
first 05 run was at 6.3G, score was top10 single card (aircooled GFX)
Looking forward to your results Macci:D
:up::up: great newsQuote:
Originally Posted by macci
Yeah! 05 and 06 WR on AMD incoming!!
*grabs popcorn and beer*
Good luck guys.
so far nicely in single card top 10 of:
3dm05
3dm06
3dm03
with aircooled GFX and about 6.2...6.35G CPU
SF3D will take it from here with multi-card and higher scores. Good luck! I'll need to drive back home now.
weekend teaser huh :D
go keep pushing it and make some ORB damage
Peace
Macci's back, I'm loving it :yepp: :up:
Nice going.... :up: :D
ALSO it's NICE to see you bench LN2 from time to time Sami... ;)
Hey Sami, nice to see you benching!
What version of driver you are use ?
nice start;
hope AMD can release new offical driver
and FM can quickly verify for aprroved driver
Hi all!
Macci came by and brought some souvenirs. Nice!
This was the first touch with cards and heat seems to be a problem on aircooling. It was already fixed with one card, which was steaming up to -80c.
Here are the scores and setup details.
AMD Phenom II X4 965 BE retail (random)
ASUS Crosshair III Formula
A-Data D9GTR
ATI Radeon 5970 (2x)
Thermaltake TP 1200W x 2
Dimastech bench table
SF3D OC line LN2 pot
Win Vista 32-bit (the fast one)
Our randomly picked 965 BE seems to be quite average :shrug:
03 Single and dual:
http://www.aijaa.com/img/b/00749/5374529.jpg
http://www.aijaa.com/img/b/00159/5374531.jpg
05 single and dual:
http://www.aijaa.com/img/b/00010/5374534.jpg
http://www.aijaa.com/img/b/00969/5374535.jpg
06 single (CPU only at 6188 :( )
http://www.aijaa.com/img/b/00985/5374536.jpg
Those were the first scores. More will follow very soon from Macci ;)
Thank you Sami!
..and I will continue singing "Hemlock Hemlock whatcha gonna do, whatcha gonna do when they come for you...
see you when the time is ready :D
Damn nice scores!
:up:
A nice weekend surprise! :eek:
Thanks guys! :up:
Awesome! 5970 Nice clocking random picked C3 cpu, especially for CPU-NB. :up:
I'm looking forward to more of this. WR potential stuff, keep pushing! Lhe? ;)
:up: nice single card numbers man
QCFX need new drivers :(
nice!
you didnt have any issues with card clocking? i saw a couple of threads with ppl complaining of some issues OCing cards while on LN2
good to see Sami getting excited about OCing :)
Yes, there is some issues with cards under LN2. Card is confused about 2D / 3D voltages and it is doing thermal throttling at the same time. So, it need to be fixed with new bios again.
Now, I need some people to tell me, that they can clock their cards without any issues :rofl:
With MSI afterburner I overclocked my 5970 @ 1000MHz core and mem 1200MHz with no issue. ;) On air.Quote:
Originally Posted by SF3D
But I want to go over CCC limits. :D:D
BTW nice scores Macci & SF3D :up:
Hehe! You did it to me G80 :up:Quote:
Originally Posted by ..::G80::..
Well yes, we are talking about 1200MHz and -100C° numbers here.
sorry i meant to say CPU on LN2 (AMD platform)Quote:
Originally Posted by SF3D
cards on air
Holy shiiit! :D:DQuote:
Originally Posted by SF3D
How do you past CCC limits? :)
1200MHz core is awesome. :up:
nice scores man
Are you useing moded bios?
With AMD GPU clock tool i can oc my 4870 beyond the CCC limit. ;)Quote:
Originally Posted by ..::G80::..
I just tried AMD GPU tool, I can olny overclock one core and 1025MHz works...Quote:
Originally Posted by Zeus
SF3D show some nice scores. :up:
Love to see that score are come from Dragon power :up:
Is 35k `06 is a lot for this setup and monster 5970 ?
I can`t understand one thing: My E8400 @ 500x9 and 3870 512Mb did 14000 at`06.
Why 5970 can not do 50k ?
He probably is. :yepp:Quote:
Originally Posted by ..::G80::..
Come on Petri, show us some krazeh numbers :D :up:
Things will come out, when time is ready..
I tested some Vantage X preset today. Got some interesting results in dual card CFX configuration. CPU speed will give quite a lot of boost already, so this last real 3D test is not like that anymore. Too bad..
Single 5970 card in X preset.
http://www.aijaa.com/img/b/00016/5383209.jpg
4GHz vs. 5.4GHz
http://www.aijaa.com/img/b/00714/5383218.jpg
http://www.aijaa.com/img/b/00886/5383222.jpg
I had just a few liters of LN2 left, so I did not have a chance to test 6GHz+ speeds.
GT2's still GPU-bound, though :-)
Not bad huh Petri?
these Hemlocks seems to kick quite strong along, and 1200Mhz GPU :up:
ORB damage incomming :D
Nice going S... :up:
GT2 is NOT GPU bound....With high CPU you gain a LOT out of it..... ;)Quote:
Originally Posted by massman
Sorry, George, I was confused by the 0.88FPS increase going from 4 to 5.4G. :p::D
I suppose you're talking about GT2 in P preset?
Yes.... :)Quote:
Originally Posted by massman
finally got my home OC rig to run at the proper speeds. for the longest time I had issues getting even 6G 3D stable. turns out that the issue was the suboptimal thermal contact with LN2 pot. recently I have been mounting the pot without springs. bad idea. :D (thx ryba for solving this!)
Used a fresh 965BE C3 and tried something new to improve the cooling (in addition to utilizing the springs). see the last photo. I haven't tried it with "the usual stuff" so hard to tell if its any better / worse this way. We'll figure it out during the weekend.
ok, the following rig:
965BE C3 week 47
Crosshair III
GSkill Perfect Storm (thx hiwa!)
one and two 5970s (crappy pre-production cards)
SF3D LHe / LN2 pot (produced by ryba)
single 1200W Thermaltake PSU
http://img.techpowerup.org/091214/rig_s.jpg
(the temps are not accurate - sensor 1 is mounted to CPU heatspreader, its a K-type sensor but at LN2 temps the reading is closer to a T-type sensor, its about 5-8C too high, sensor 2 is on the base of the pot, its a proper K-type sensor but now reads too low as the meter is set to read T-type)
and following scores:
single card 05:
http://img.techpowerup.org/091214/48256.png
CompareURL
single card 06:
http://img.techpowerup.org/091214/36263.png
CompareURL
dual card 05:
http://img.techpowerup.org/091214/49720.png
CompareURL
dual card 06:
http://img.techpowerup.org/091214/38052.png
CompareURL
everest showing the bandwidth:
http://img.techpowerup.org/091214/Ev_6384.png
and pot base:
http://img.techpowerup.org/091214/pot_base_s.jpg
very easy to mount and unmount. zero mess with paste. optimal? no idea but so far so good :D
Very nice. :up: Canyon flight seems especially strong in both 05/06 with this GPU configuration. :)
impressive clocking :)
what exactly did you use there at the base?
Awesome! Almost 4.8 CPU-NB is unreal, that sure boosts the scores.
Is that pure silver at the base of the pot?
Looks to be some sort of thermal pad but not thick like the normal ones. Would like to hear more info on these. Also that maybe the sickest debug card I've ever seen :)
Thanks :)
its a sheet of indium
05 scores would improve slightly with GBT mobo (especially GT1), need to try that during the weekend as well.
What makes the GBT board to have a slight advantage? Better mem-nb subsystem or pcie lay-out improvement?
siiick 3d speeds and sick nb speed :O what voltage was it running at?
This is a bit confusing to me. Indium's thermal conductivity is rather poor :confused:. Could it be that you were using too much paste and not enough pressure on your IHS pehaps?Quote:
Originally Posted by macci
http://environmentalchemistry.com/yo...c/thermal.html
woooow sick single card scores - dual gpus starve for even more cpu power but hell these are for sure the most insane AMD scores you'll find all around currently. Amazing work macci and better train your pot mounting skills :p:
wicked, thats SICK stuff your pulling up there Macci
keep pushing it
Wicked clocks Macci, 6.5 ghz and 4.8 ghz for 3D is REAL NICE!:D
I too would like to know more about this thermal medium. When you say zero mess, do you mean it doesn't spread like normal paste and keeps its form like in the picture?
Nice work Macci, and very interesting thermal contact solution!
Fast runs there sami, Congrats great cpu too :up:
xes, very nice and contact with IHS
More cards + new aircooler arrived! (Thanks to Jimm's PC store)
http://www.aijaa.com/img/b/00356/5428494.jpg
Pretesting cards and setup on air. That is the new Noctua NH-D14 in the picture.
http://www.aijaa.com/img/b/00529/5428554.jpg
At least these retail cards are clocking a bit better than the ES ones. 1025/1150 was no problem on first runs.
More to come on upcoming weekend :up:
Nice cards. Looking forward to this weekend benching from you guys. :up:
Any news?
Merry Xmas to everyone!!
I decided to test some single card Vantage yesterday.
Noctua NH-D14 is doing pretty well in normal room temperature :)
Setup:
http://www.aijaa.com/img/b/00792/5450120.jpg
Score:
http://www.aijaa.com/img/b/00879/5450124.jpg
Validation:
http://service.futuremark.com/compare?3dmv=1718417
You did it all on air...:D
Great score...:up:
Very nice score and very nice cooler!
Congrats, Petri!
Thanks guys! I might try this setup in my garage next week. 30K on air would be cool to get :)
Temperature was -26 last night, so that might help a bit...
Nice score
Geez SF3D...Can't find a 5970 anywhere and you have 4! :( :p:
Sick scores there SF3D, congrats.
In january hopefully I will have a chance to test a HD5970+5870+5870 crossfire, but the 5970 one is pretested and it can run 960/1270 vantage on 1.2125v core 1.15v mem. If i would like to run it on 1000mhz engine, what should I give it? cold and voltage? In my last session I tested a sapphire 5870 and it stopped scaling after 1.2v... It was 40 45c warm under vantage but, from 1ghz engine to only 1010mhz I couldn't stabilise it with 1.25v... Can you share me some info about the vrm temperature of your card under load at 1000/1200mhz? Thanks in advance.
1,274V and 1GHz stable:Quote:
Originally Posted by subaruwrc
http://hwbot.org/result.do?resultId=934993
Roam temp is 20C.
How do raise mem voltage?With XFX tool? :rolleyes:
But Vantage is better with Vista. ;)
Hey thanks. So I will need approximately 1.28v on the core to reach 1ghz maybe. I ve tested it in my cellar at 15c roomtemp :D so temperature wasn't my bottleneck.Quote:
Originally Posted by ..::G80::..
So u suggest using vista 64 bit instead of win 7 64bit for cfx?
I only tested single 5970. ;)Quote:
Originally Posted by subaruwrc
very good card!