White cascade with bypass

Hi

Cascade in BIG case , with 2 independent condensors (one 4.8 kw + another 0.75kW for desuperheater), bypass valve and ...."standart" compressors ;) . This time I used Danfoss TS2, not Alco Ti-HW on 1st stage :p:. All motor fans are EBM-Papst :D.

Specs :

compressors: Toshiba PH160T2-4L2 on 1st stage + Toshiba PG180X1C on 2nd stage
evap: steeper 42mm diam/41mm tall
XV: Danfoss TS2/captube 0.9 mm
HX: plate HX , 12 plates
condensers: 4.8 Kw, alu-cu, cooled by 2x 254mm/230V fans + desuperheater for 2nd stage 0.75kW , alu-cu, cooled by 170mm/230V fans
refrigerants : R507/R1150
oilseparator : Shine Year automatic
safety : RANCO cut-off, FACH 1.5l expansion tank
case : Laser cutted and powder coated case, 89 x 71 x 51 cm, wheels
others: Bypass valve - Castel handvalve, 2*REFCO panel gauges (discharge pressure), ANACONDA shocks absorber on 1st stage suction line, polished and clear coated pipes, 350mm fan on back wall

http://www.piotres.boo.pl/cascadewhite/1.jpg

http://www.piotres.boo.pl/cascadewhite/2.jpg

http://www.piotres.boo.pl/cascadewhite/3.jpg

http://www.piotres.boo.pl/cascadewhite/4.jpg

http://www.piotres.boo.pl/cascadewhite/5.jpg

http://www.piotres.boo.pl/cascadewhite/6.jpg

http://www.piotres.boo.pl/cascadewhite/7.jpg

http://www.piotres.boo.pl/cascadewhite/8.jpg

http://www.piotres.boo.pl/cascadewhite/9.jpg

http://www.piotres.boo.pl/cascadewhite/10.jpg

http://www.piotres.boo.pl/cascadewhite/11.jpg

http://www.piotres.boo.pl/cascadewhite/12.jpg

From some short time, I've started to use ONLY EBM fans in mine builds ...cheap chineese are just not enought trustworthy.

http://www.piotres.boo.pl/cascadewhite/13.jpg

Clear coat as almost always :D.

http://www.piotres.boo.pl/cascadewhite/14.jpg

http://www.piotres.boo.pl/cascadewhite/15.jpg

http://www.piotres.boo.pl/cascadewhite/16.jpg

http://www.piotres.boo.pl/cascadewhite/17.jpg

http://www.piotres.boo.pl/cascadewhite/18.jpg

http://www.piotres.boo.pl/cascadewhite/19.jpg

Again ...sorry for funny despriptions, I know that's maxed NON-pro ;) .

http://www.piotres.boo.pl/cascadewhite/20.jpg

http://www.piotres.boo.pl/cascadewhite/21.jpg

http://www.piotres.boo.pl/cascadewhite/22.jpg

http://www.piotres.boo.pl/cascadewhite/23.jpg

Final unloaded temperature.

http://www.piotres.boo.pl/cascadewhite/24.jpg

Bypass is a little bit opened - it worked quite good like for a ordinary handvalve . The littest drop can be set under 260W load is -91*C from -94*C when valve is fully closed .

http://www.piotres.boo.pl/cascadewhite/25.jpg

That's temperature on 260W dummyload after 2 hours test.

http://www.piotres.boo.pl/cascadewhite/26.jpg

And that's 1st stage ;) .

http://www.piotres.boo.pl/cascadewhite/27.jpg

http://www.piotres.boo.pl/cascadewhite/28.jpg

http://www.piotres.boo.pl/cascadewhite/29.jpg

http://www.piotres.boo.pl/cascadewhite/30.jpg

http://www.piotres.boo.pl/cascadewhite/31.jpg

http://www.piotres.boo.pl/cascadewhite/32.jpg

http://www.piotres.boo.pl/cascadewhite/33.jpg

http://www.piotres.boo.pl/cascadewhite/34.jpg

Regards,
Peter

Very Nice :clap: Do you ever slow down ? :D

This is very impressive I really mean it, clean, powerful, and very good worksmanship this is one of your more impressive builds IMO.

monster

I dont know that much about them yet but looks great to me... :shrug::up:

Beautiful as always.

Very nice and clean build :)

lovely build.:)

nice build &pack as always pete :up:

Hey ! That's mine unit !!! :p:

I'm really anxious to be able to test it! :D

Again, thank you Peter! :up:

awsome build as usual :)

Great build, very clean with great attention to detail!! Any other colours coming soon??;);)

Can you tell me tv2 when the bypass is working?

beautiful, so very beautiful. Even without the case. :up:

Quote:

---

Originally Posted by Expat GriZ

Great build, very clean with great attention to detail!! Any other colours coming soon??;);)

---

Yep , I got one interesting colour of this case ;) :p:.

Quote:

---

Originally Posted by -EC-UnRockStar

Can you tell me tv2 when the bypass is working?

---

Sorry but ...maybe I'm noob ... but what's is tv2 ? ;)

Quote:

---

Originally Posted by -EC-UnRockStar

Can you tell me tv2 when the bypass is working?

---

He asks the temperature of the hot gas port when the bypass is active. :)

Very nie;) Beter yet tell us where on the low side & high side is the bypass conected, plus is it a cap tube or something like this?

Quote:

---

Originally Posted by -EC-UnRockStar

Can you tell me tv2 when the bypass is working?

---

He means the Rotary Temp because you are heating the compressor with that bypass. Maybe it´s a short life for the second stage when you select a temp where you need a wide opened bypass :D

We will see ;)

Quote:

---

Originally Posted by Patrickclouds

He means the Rotary Temp because you are heating the compressor with that bypass. Maybe it´s a short life for the second stage when you select a temp where you need a wide opened bypass :D

We will see ;)

---

I'm trying to trace where the bypass line is feeding from but it looks like its coming directly from the "OUT" port of the oilsep and before the desuper condenser. Is every ones concern because the gas is still very hot at that point and it might be overheating the compressor?

Hot gas bypasses are usually left on for very short durations to avoid cold boots or to warm an evap up when shutting down. If it was used under high load then maybe it would be a problem :shrug:

Just trying to understand the concern because I usually have mine after the desuper condenser and haven't had any issues.

Again super nice work Piotres. :up:

You are the master at making very clean builds and packaging them up the best possible way :clap:

In this build I haven't measure that, in previous one which bypass mounted in exactly same way after 5 minutes of working with opened bypass temperature of compressor shell rise for approx 4*C . Owner of that cascade is very happy with it , and how bypass work .

It's 1.6mm ID captube used for bypass .

Nevermind, I know about what You mean ;) - in ALL mine next builds with bypass , bypass outlet captube will be going DIRECTLY to evaporator head :yepp:.

Regards

+1 that is beautiful workmanship.

damn!!! That is so beautiful I almost cried - I love it!!! I don't think I can put it into words other than - WOW!

:up:

Man thats clean. Much respect to you for doing a superb job and having the pride in your great work.
You should move to Hawaii soon, me needs a builder :yepp: :shrug:

Very nice work! :clap:

Hello my friend :D

Today, I've made some hard bench for the first time and 'im really pleased of the performance of the unit!
Unload Temp is around -103°
Temp during SuperPi 32M with 1.62v (i7 975) is stable at -101°, the same temperature also with 1.47 or 1.65v, impressive !
Temp during Wprime 1024 (full load, 8treads) with 1.46v is stable at -97° !!!! This is particularly impressive ! :eek:

After around 8 hours of bench, the temperature is always the same at the end of the day, -101° :clap:

Thank you so much again, you've make very great stuff

Sincerely,
dami1stm

wow im impressed

beautiful job as always , so much detail its amazing , your passion and dedication for this hoobie its shown on all your builts. So when are you moving to Puerto Rico :D.

Regards: angelo.