Core i5 oc

Printable View

09-08-2009, 03:34 AM
TAOTAO161

Core i5 oc

hello all,

here is my result with my new core i5 system :)

CPU- Core i5 750 2.67GHz
motherboard - ASUS P7P55D EVO
memory - PATRIOT XPROJECT 1800MHz CL7
GPU- LEADTEK GTX 285
OS - WIN 7

system pic:

http://img34.imageshack.us/img34/6489/p1000561y.jpg

http://img179.imageshack.us/img179/8705/p1000568m.jpg

http://img34.imageshack.us/img34/644/p1000581d.jpg

http://img34.imageshack.us/img34/3421/p1000592t.jpg

info:

http://img168.imageshack.us/img168/2835/stockg.jpg

SUPER PI stock
http://img269.imageshack.us/img269/8...perpistock.jpg

temp on idel (room temp 28-30+-) :eek:
http://img33.imageshack.us/img33/2893/stockidle.jpg

stress test :(

http://img168.imageshack.us/img168/5972/stockstress.jpg

CM HYPER TX3 with extra TT fan

http://img297.imageshack.us/img297/3630/p1000608g.jpg

http://img195.imageshack.us/img195/282/p1000610l.jpg

4GHz was easy

http://img38.imageshack.us/img38/6492/4ghzl.jpg

from 4GHz and above the CPU was not stable, only at voltage of 1.53 and up.

http://img38.imageshack.us/img38/1609/42ghz1600ddr2.jpg

after changes in the skew/voltage i success to reach :

http://img6.imageshack.us/img6/8863/43ghz1600ddr.jpg

the max BCLK for now is 207.MHz.

http://img248.imageshack.us/img248/8392/topkj.png

i am waiting for better cooling, and i hope i will reach more BCLK.

:)
09-08-2009, 03:49 AM
v0dka

What diid you change skew to?
09-08-2009, 12:11 PM
kiwik

1.5V needed for over 4GHz? Did you get a dud or something?
09-08-2009, 01:45 PM
phsinc1

looks like lga 1175 aren't great in OC'ing, lowest vcore I saw in reviews for i7 860 @ 4GHz was 1.33 ~ 1.35v, seems like lga 1366 oc's better
09-08-2009, 02:10 PM
Chri$ch

uh, what a crap CPU.....

i had no i5-750 which was that worse! my best i5 can do 4Ghz @ ~1.29v and 4.1Ghz @ ~1.34v on air stable :)
09-08-2009, 02:16 PM
KILLER_K

Quote:

Originally Posted by phsinc1

looks like lga 1175 aren't great in OC'ing, lowest vcore I saw in reviews for i7 860 @ 4GHz was 1.33 ~ 1.35v, seems like lga 1366 oc's better

I'm not sure why you say that for. As the c0's takes a little more then that to hit 4grz on the i7 920 socket. So if you cut off HT then it is pretty close to being the same.

Though i would like to see some everest, sandra {memory & cpu scores} and cinebench scores.
09-08-2009, 02:42 PM
Wildcat293

With i5 the pci-e controller is on the CPU and the freq is tied to the BCLK

so its not a crap cpu, just poor implementation of the controller (they should have locked it at 100mhz like mobo's do now)
09-08-2009, 03:27 PM
TAOTAO161

Quote:

Originally Posted by v0dka

What diid you change skew to?

i change it to 1300 (CPU SKEW), i start from "normal", then from 300 and on 1300 i have the best stability.

and yes the cpu was not stable below 1.53 voltage, as well he don't like changes in the PCI-E freq, as it lock on 100, when i change it in 1MHz, the all system crushed.
09-08-2009, 03:30 PM
phsinc1

Quote:

Originally Posted by Wildcat293

With i5 the pci-e controller is on the CPU and the freq is tied to the BCLK

so its not a crap cpu, just poor implementation of the controller (they should have locked it at 100mhz like mobo's do now)

and no way to lock the pci-e?
09-09-2009, 03:00 AM
TAOTAO161

i lock it on 100, as you know in other systems, you can achive more stability with 105+- PCI-E freq, but here nothing, only 100MHz work.
09-09-2009, 03:11 AM
kiwi

I have a similar batch - 3.8Ghz 1.3V stable but for 4Ghz it needs at least 1.4V
09-09-2009, 03:37 AM
Sparda

Quote:

Originally Posted by phsinc1

looks like lga 1175 aren't great in OC'ing, lowest vcore I saw in reviews for i7 860 @ 4GHz was 1.33 ~ 1.35v, seems like lga 1366 oc's better

Isnt it the first rev. of the cpu which usually need more vcore. The second one will need less if there any just like the old rev. change
09-09-2009, 04:55 AM
The Asgard

Quote:

Originally Posted by Sparda

Isnt it the first rev. of the cpu which usually need more vcore. The second one will need less if there any just like the old rev. change

The first batch tend to be always pretty good in my experience.

May be Intel want everyone to think they are great clockers to get the word around.
09-09-2009, 06:50 AM
americium

4.36GHz on air cooling is nice for our temperatures in Israel these days.
Too bad you can't use yet your water cooling for that system. I'm sure you could get some more juice out of it. :)
09-09-2009, 07:49 AM
lordmagnum

I think You haven't installed well the Intel's radbox.
09-09-2009, 08:13 AM
Jamesrt2004

in first few pics with intel cooler, whats with the fluctuating clock's etc..?
guessing
Idle = you had all power saving stuff on then pi = turbo to 3.2 then OCCT = throttled?
09-09-2009, 09:21 AM
xdan

Quote:

Isnt it the first rev. of the cpu which usually need more vcore. The second one will need less if there any just like the old rev. change

Still PcCI2iminal seems to have a much better 750, quite avesome, almost like DO(see in his thread), soo it's seems that we return to the mith :the "vid".
The lower..the better..at stock it seems that it runs at 1.104v so 1.104 vid.
http://img185.imageshack.us/img185/227/prime.jpg
09-09-2009, 08:46 PM
caffeine

i5 - 750 Cinebench OC @ 4ghz == Sick_Score

http://www.elitebastards.com/index.p...7&limitstart=6

Compare to this thread:

http://www.xtremesystems.org/forums/...d.php?t=209284

For us 3D guys; This type of data doesn't make the upgrade decision any easier. Hopefully a bunch of overclocking data comes in the next days and weeks... need to firm up this picture.
09-10-2009, 08:49 AM
Chri$ch

short oc test with Intel Xeon X3470 (i7-870) and air cooling (ac freezer xtreme)

http://www.abload.de/img/4ghz-x3470ff72.png
09-10-2009, 09:12 AM
Wildcat293

Quote:

Originally Posted by phsinc1

and no way to lock the pci-e?

sorry not pci-e freq per-se, this explains it pretty well

http://www.anandtech.com/cpuchipsets...px?i=3634&p=19
09-10-2009, 09:30 PM
misho

@ OP, damn high voltage, what were the temps like?
09-11-2009, 04:54 AM
dcl

Out of curiosity why are you using a PS2 adapter for a USB device with plenty of ports left?
09-11-2009, 09:45 AM
Pt1t

Look at this one :

http://www.pt1t.eu/public/P55/Biosta...500Mhz_air.PNG
09-11-2009, 10:08 AM
Chri$ch

short 32M test on air (AC Freezer Xtreme) w/o tweaks

http://www.abload.de/img/4.62ghz-32m-1ewcn.png
09-11-2009, 10:54 AM
ArCElM

thats an absolutely frightening amount of voltage.
09-11-2009, 10:47 PM
PatRaceTin

i am waiting for "1156 Overclocking by Batch"
09-12-2009, 03:19 AM
FlanK3r

Quote:

Originally Posted by Pt1t

Look at this one :

http://www.pt1t.eu/public/P55/Biosta...500Mhz_air.PNG

Quote:

Originally Posted by Chri$ch

short 32M test on air (AC Freezer Xtreme) w/o tweaks

http://www.abload.de/img/4.62ghz-32m-1ewcn.png

omg:eek::shocked:....really only AIR cooler on CPU , or too some aftercooler?
09-12-2009, 03:26 AM
Chri$ch

only the ac freezer xtreme with a yate loon d12-sl12 fan (~1200rpm) @ ~20°C room temp
09-12-2009, 06:40 AM
Pt1t

And subzero cooling :D

http://www.pt1t.eu/public/P55/Biosta...eri55_5182.png
09-12-2009, 07:29 AM
Tom|Nbk

Adding my Week 24,

3.2Ghz seems to be the max on the stock cooler, VID is 1.176v, running under stock volts atm all good. :clap:

Just waiting on the Corsair h50 1156 brackets

http://i219.photobucket.com/albums/c.../Capture-1.png
09-12-2009, 07:53 AM
M-XXXX

I has quite the some problems: 4ghz was limit at safe voltages:

http://www.oc-lab.si/test.php?t=108&p=7
09-12-2009, 09:23 AM
Tom|Nbk

http://i219.photobucket.com/albums/c...k/Capture2.png

3.5Ghz booted under same volts, not a clue how stable it is but I'm impressed, this is UNDER stock volts

http://i219.photobucket.com/albums/c...omNbk/pi1m.png

Still on stock cooling lol :up:
09-12-2009, 02:57 PM
Yamcha67

Nice OC results,

Im getting my i5 setup in a few days.. will post my results :]