Preliminary Test of Gskill PS 2200 CL8 for P55, 2400 8-8-8-24 32M Stable

That 's a quick test but it speaks from itself :rolleyes:

I 'm testing last Perfect Storm memory from G.Skill , the F3-17600CL8D-4GBPS... with other name, Perfect Storm 2200 CL8 2 X 2Gb KIT for P55.

* Core i7 870 aircooled
* eVGA P55 FTW 657
* G.Skill PS 2200Mhz CL8
* Gainward 295GTX
* Silverstone ZM1200M (1200W)
* GeForce 190,38 drivers
* Windows XP SP3


http://www.pt1t.eu/public/GSkill_220..._PS2200CL8.jpg

http://www.pt1t.eu/public/GSkill_220..._67V_photo.jpg

After some tests on eVGA 657 FTW ... it passed easy super pi 32M @ 2400Mhz 8-8-8-24 with Vdimm under 1,7V :eek:

2400Mhz 8-8-8-24 1,68V
http://www.pt1t.eu/public/GSkill_220...kill_1_67V.PNG

I will do more test later with CL6, CL7, CL8 and CL9 and under cold off course :D

http://www.pt1t.eu/public/GSkill_220...PS2200CL8_.jpg

impressive kit and IMC

HIWAs kit is also doing quite well

looking forward to see how it will go under cold ehe

Any Everest testing? Curious what kind of bandwidth we'll see on a kit clocked that high on P55 :up:

nice bro ^^

Quote:

---

Originally Posted by tool_462

Any Everest testing? Curious what kind of bandwidth we'll see on a kit clocked that high on P55 :up:

---

+20K , that 's nice for dual channel !

http://www.pt1t.eu/public/GSkill_220...kill_1_67V.PNG

Any tests possible on I7 Thomas ?

Quote:

---

Originally Posted by Leeghoofd

Any tests possible on I7 Thomas ?

---

That should be interesting:D

Nice indeed.. yeah you wonder how these kits do on X58. Probably still limited by X58/i7 uncore/qpi frequencies and IMC ??

in my case its not the imc..i'm trying my ocz ddr2000cl7 at same frequency....but at a higher voltage ddr2200@ 8-8-8....the rams can't take it... if i could get a hold of these low voltage rams..it would be awesome to try :D

Quote:

---

Originally Posted by Pt1t

+20K , that 's nice for dual channel !

---

Nice :cool:

20k/15k/20k is awesome for dual channel :up:

:clap::clap: that's damn crazxy nice kit :D Gskill PWR Inside :up:

Super Pi 32M CL7 test but this time on gigabyte UD6

* Core i7 870 aircooled
* Gigabyte P55 UD6
* G.Skill PS 2200Mhz CL8
* Gainward 295GTX
* Silverstone ZM1200M (1200W)
* GeForce 190,38 drivers
* Windows XP SP3

2300Mhz 7-8-7-24 1,8V
http://www.pt1t.eu/public/GSkill_220...skill_1_8V.PNG

:clap::clap: very nice cl7 action, it's just insane thomas :up:

Nice results, that looks like a very good sample kit you have there. I have not pushed mine yet but will do so soon.

ahhh.. nice Thomas :up: mine will arrive next Tuesday...

:shocked: 2300 CL7 32M by air??? The kits are crazy. G.Skill is on fire this time. Do they already sell these kits??

I dont know but they listed it here : http://www.gskill.com/products.php?index=212

sorry to post this in your thread Thomas, just comparison with old Hyper chips on the same board

DDR3-2400 C8 air cooling 1.8v with GSkill Perfect Storm F3-16000CL7-6GBPS

http://img90.imageshack.us/img90/943...88241t18vz.jpg

Impressive kit but do you really need fans @ 1.65v??? :confused:

Just wondering if there's any use of that included fan or not, I was under the impression DDR3 ram doesn't require cooling unless you go to some crazy suicide volt runs for DDR3.

Quote:

---

Originally Posted by RPGWiZaRD

Impressive kit but do you really need fans @ 1.65v??? :confused:

Just wondering if there's any use of that included fan or not, I was under the impression DDR3 ram doesn't require cooling unless you go to some crazy suicide volt runs for DDR3.

---

I think no but fan are noiseless ... and it s always better to cold memories to preserve it :D

Quote:

---

Originally Posted by Benny Lodewijk

sorry to post this in your thread Thomas, just comparison with old Hyper chips on the same board

DDR3-2400 C8 air cooling 1.8v with GSkill Perfect Storm F3-16000CL7-6GBPS

http://img90.imageshack.us/img90/943...88241t18vz.jpg

---

benny, ur super pi effiency is very fast in lynnfield, 2400C8 and gskill rocks

It's very close between 6-7-6 2000 and 8-8-8 @ 2400, but I think 6-7-6 can just about beat it. Cas 8 is around .66ns off, although the extra bw helps a little (maybe tighter subs possibe at CAS 6 though), a side by side compare will be nice. I guess for higher CPU clocks at 22X, 8-8 might be the only option.

Nice module stick..

:shocked:

Quote:

---

Originally Posted by raju

It's very close between 6-7-6 2000 and 8-8-8 @ 2400, but I think 6-7-6 can just about beat it. Cas 8 is around .66ns off, although the extra bw helps a little (maybe tighter subs possibe at CAS 6 though), a side by side compare will be nice. I guess for higher CPU clocks at 22X, 8-8 might be the only option.

---

I have comparison screenshot 6-7-6 @ 2000

http://img269.imageshack.us/img269/9...76241t186v.jpg

FYI , no tweaks, no CW... just tighten subtimings.. you can see the efficiency is not better than 2400C8 (my previous 2400C8 screnshot also the same no tweaks on OS, no CW, just tighten subtimings)

Thx for clearing that up, will be interesting to see how far you can scale tRCD 8 vs tRCD 7 @ CAS 6.


I'm only just starting to play with mine,

http://img300.imageshack.us/img300/9...5268981788.jpg

what s the difference between 8-9-8 and 8-8-8 for your kit ?

Quote:

---

Originally Posted by Pt1t

what s the difference between 8-9-8 and 8-8-8 for your kit ?

---

for voltage or 32m?

Quote:

---

Originally Posted by raju

for voltage or 32m?

---

for 32M with same Vdimm

My CPU's IMC does not seem to like tRCD 8 over/at 2400MHz for 32M at all (tried 2 different kits now from 2 vendors). I think the jump is 0.04V+ at the same freq if I guess. Can you try on yours and see how much the voltage increases?

I'm having some fun with these sticks cold (I have not cross compared to the other kit I have yet so this will be interesting).

http://img40.imageshack.us/img40/4070/gs26008981788.jpg

Last one for today;

http://img246.imageshack.us/img246/5...6228981788.jpg

did you run 2k6 at 213 bclock/2560 mem and then bumped it up before you took the screenshot or is fm still not reading cpu speed properly?

very impressive either way!

I did not close 06 when I ramped BCLK so yeah the real clock was what is shown in CPU-Z (it did run the bench at the speed shown).


here's the everest (i need to update this to the latest beta too).

http://img2.imageshack.us/img2/7987/...m2622898gs.png

Quote:

---

Originally Posted by raju

I did not close 06 when I ramped BCLK so yeah the real clock was what is shown in CPU-Z (it did run the bench at the speed shown).


here's the everest (i need to update this to the latest beta too).

http://img2.imageshack.us/img2/7987/...m2622898gs.png

---

so it IS 2k6 stable at 2600 but on this screenshot the 2k6 run is actually from 2560? does 2k6 scale at all with more mem bw?
how is real world mem scaling in 1156 seeing as its only 2 channels?
at 1366 it pretty much stops at 1333, how about 1156? is there notable real world scaling above 1333?

Quote:

---

Originally Posted by saaya

so it IS 2k6 stable at 2600 but on this screenshot the 2k6 run is actually from 2560? does 2k6 scale at all with more mem bw?
how is real world mem scaling in 1156 seeing as its only 2 channels?
at 1366 it pretty much stops at 1333, how about 1156? is there notable real world scaling above 1333?

---

No the run in the screenshot is from 2622MHz (you can cross confirm with the CPU score). 06 was left open for every run from first boot, I ramped BCLK then re-ran the bench every time - so the score you see is from 1311. I just wanted to show that you can bench at these speeds, I'm sure you've seen people do that before.

Dunno about real world effects, I have not tested that kind of stuff (it's not what I do). I'd imagine its the same as it's always been, in that it makes jack difference..

later
Raja

hey raja was your RAM subzero?
very nice clocking
have you done any 32M SuperPi at those speeds :up:

hey Thomas nice kit of RAM
:up:

Very nice stcks raja,were them under cold? :up::up:

2622 even... hmmm its a real shame uncore cant be ramped up on 1156...
any word from intel if theyll fix that with 32nm or future skus? :/

Yeah guys, the sticks are cold - cascade was at -87 but contact is poor so I'd imaging the sticks are at -40.

Need to get one of the pot builders to make a good DDR pot (a platter with sliding heatspreaders will suffice).

Dinos, 32M is beyond my CPU up this high. 3D is fine. Aq3 will be interesting for the guys that like it.

Quote:

---

Originally Posted by raju

Yeah guys, the sticks are cold - cascade was at -87 but contact is poor so I'd imaging the sticks are at -40.

Need to get one of the pot builders to make a good DDR pot (a platter with sliding heatspreaders will suffice).

Dinos, 32M is beyond my CPU up this high. 3D is fine. Aq3 will be interesting for the guys that like it.

---

Aha... it's under cold.....really nice

Quote:

---

Originally Posted by raju

Yeah guys, the sticks are cold - cascade was at -87 but contact is poor so I'd imaging the sticks are at -40.

Need to get one of the pot builders to make a good DDR pot (a platter with sliding heatspreaders will suffice).

Dinos, 32M is beyond my CPU up this high. 3D is fine. Aq3 will be interesting for the guys that like it.

---

Do you have a picture of cascade evap on ram? i need to try also this king off ghetto stuff :D

Quote:

---

Originally Posted by Pt1t

Do you have a picture of cascade evap on ram? i need to try also this king off ghetto stuff :D

---

Lol, I'll send you a pic when it all dries out. Get some nice big zip ties :)

Quote:

---

Originally Posted by Pt1t

Do you have a picture of cascade evap on ram? i need to try also this king off ghetto stuff :D

---

you didnt see it in the graveyard thread? :D

raja, i still dont get it, i think fm is still not reading cpu speed properly...
it says 4050, and mem is 2600/12=217 bclock...
4050/217=18.7 cpu multi :D

2622/12=218.5 bclock
4050/218.5=18.5 cpu multi :D

so either you took this shot after just upping mem and before you ran 2k6 again and the 2k6 run was 213x19=4050 and mem at 2560, or fm detects cpu speed wrong, STILL :rolleyes: and it was actually 216x19=4100 or 218x19=4140

Ignore the reading in FM Sascha - BCLK is around 218.5 approx X19 CPU clock on 2:12 - this gives the 2622.

I upped the BCLK by 1-2 each time and then reran 06. The first time I opened 06 was when I first loaded windows. I eneded up at 218.5 when I re-ran 06 - I did not close 06 between ramping BCLK (apart from on the very first run) that is why it is still reoprting the CPU speed from the 213 run (I did not post all screenshots in between). WHat you see in CPU-Z in each screenshot is where 06 was run each time. Can't put it any simpler. I hope that is starting to make sense for you now. :)

the GPU tests have a habit of jumping around, the CPU test does not.

Keep reading this until it makes sense as I'm not going to explain it all again :)

The initial run which I did not post here as I got it higher was at 213, that is what FM read when 06 was loaded at 213, it just does not pick up when you change BCLK (it does not probe clocks again after it's launched).

Quote:

---

Originally Posted by raju

Keep reading this until it makes sense as I'm not going to explain it all again :)

---

geez clam down...

that really sux then, fm promised theyd get hardware detection right with their new patch... then again if they detect the speed correctly when its launched the first time thats good enough, if thats really reliable :D

Quote:

---

Originally Posted by saaya

geez clam down...

that really sux then, fm promised theyd get hardware detection right with their new patch... then again if they detect the speed correctly when its launched the first time thats good enough, if thats really reliable :D

---

I'm calm dude, no worries.

yeah, it is accurate on first launch (at least it has been so far).

Quote:

---

Originally Posted by raju

I'm calm dude, no worries.

yeah, it is accurate on first launch (at least it has been so far).

---

how well does this stuff with cas5? not worth it compared to cas6 i guess?
id die if id see 1800 or even 1866 cas5... that would be so sweet... :D

oh and what about ddr3 cas4? i remember some people saying its possible in theory a while back? there was a bug of a giga board showing cas4 when it was cas5, but several people saif cas4 is actually possible in theory?
i def prefer tight timings over high speed... :D

Quote:

---

Originally Posted by saaya

how well does this stuff with cas5? not worth it compared to cas6 i guess?
id die if id see 1800 or even 1866 cas5... that would be so sweet... :D

oh and what about ddr3 cas4? i remember some people saying its possible in theory a while back? there was a bug of a giga board showing cas4 when it was cas5, but several people saif cas4 is actually possible in theory?
i def prefer tight timings over high speed... :D

---

Not sure on CAS 4 or 5 really. I did fool around for a while with CAS 5 on some older sticks and was benching around 1400. I have no idea if these modules will go higher than that at this point (the Corsair seems better at CAS 6 than the GSkill (per mv) so might be the better choice).

2600 CAS 8, is like CAS 4 1300 for real latency so there is some progress for DDR3 I guess. Just goes to show how well Intel have nailed IMC setup, it's all automated and works very well.

regards
Raja

I reran just for you Sascha. Ambient are a bit higher now so had to up Vdimm by 0.02V due the the warmer evap temp (1.808V real);

Anyway, I hope this clears up the 06 reading the CPU speed stuff etc. Its from a fresh boot as the scores always seem best on the first run..

http://img36.imageshack.us/img36/5556/gs26228981788.jpg

hah, no worries man, was just trying to figure out what bclock it was, and the cpu speed was the first i saw, with the obvious 12x mem multi that didnt add up tho :D
so what ever happened to those 270 and rumored 300 bclocks with 1156 on giga and biostar boards? was it a bug? or only screenshot stable?
have you pushed for max bclock on this evga board yet? this is the one with 2 clockgens isnt it? :D

The boards are all very very close. I have the GB board on it's way so I'll have some better news on all of that once I test all of them fully and compile the results. 270+ is certainly doable, the 300 stuff I'm not sure yet, depends on the CPU. I do know that someone posted a cheeky Win 7 misread at 308 over on one of the Taiwan/Chinese forums. I have benched 3d around 260 and I know someone else who did at 265, so CPU permitting I'd expect some validation overhead.

Quote:

---

Originally Posted by raju

The boards are all very very close. I have the GB board on it's way so I'll have some better news on all of that once I test all of them fully and compile the results. 270+ is certainly doable, the 300 stuff I'm not sure yet, depends on the CPU. I do know that someone posted a cheeky Win 7 misread at 308 over on one of the Taiwan/Chinese forums. I have benched 3d around 260 and I know someone else who did at 265, so CPU permitting I'd expect some validation overhead.

---

That 308Bclk is Bug raja the user write it in 3rd post :D

Quote:

---

Originally Posted by hiwa

That 308Bclk is Bug raja the user write it in 3rd post :D

---

Yeah, that is why I said 'cheeky'..

i'll continue here
here was my thread one thread is better than 2 ;)
i am finishing review on them before push them @ max :D

http://www.xtremesystems.org/forums/...d.php?t=233390

You re Welcome Hiwa :D

Here is some pictures of the kit wjile i m fighting to get 2600 CL9 stable on air with tight B2b :)

http://www.pt1t.eu/public/GSkill_220...600CL8_800.jpg

http://www.pt1t.eu/public/GSkill_220...d-haut_800.jpg

http://www.pt1t.eu/public/GSkill_220...ntillo_800.jpg

sorry buddy but in these days we are damn busy with reviews
i'll start soon :D

G.Skill DDR3 3250 !! :eek:

http://img9.imageshack.us/img9/8166/20090910213431.png

holy moly :D

CRAZY DDR3-3250Mhz validation!!!!

Quote:

---

Originally Posted by stasio

G.Skill DDR3 3250 !! :eek:

http://img9.imageshack.us/img9/8166/20090910213431.png

---

Blue Ant? :rofl: looks like someone saved a bunch of validation files in a single session and flooded the HOF with different names - ram co, or mb co :D

After fight with different bios i can do 2600CL8 with B2B 4 on tpower i55 all on air.

http://www.pt1t.eu/public/P55/Biosta...600CL8B2B4.png

Woooo.....nice :clap:
VDimm?

1.79V VDIMM and 1.52V VTT

:eek: love to see 2600 cl8 :yepp: i want my platformmmmmmm :( :D

Nice stuff on air Pt1t

This is where I'm at so far cold 8-9-8-24 1N 2692MHz (1.82 Vdimm);

http://valid.canardpc.com/show_oc.php?id=703426

EVGA board B2B is disabled at these speeds..

Quote:

---

Originally Posted by raju

Nice stuff on air Pt1t

This is where I'm at so far cold 8-9-8-24 1N 2692MHz (1.82 Vdimm);

http://valid.canardpc.com/show_oc.php?id=703426

EVGA board B2B is disabled at these speeds..

---

Retail Board raja?

Cool freq under cold :clap: what about RTL's raja ? can you boot with RTL's over 65 ?

Quote:

---

Originally Posted by hiwa

Retail Board raja?

Cool freq under cold :clap: what about RTL's raja ? can you boot with RTL's over 65 ?

---

I have not tried to boot with looser RTL yet - it was at deafult for 2544 MHz Cas 8-9-8 (this was boot into OS). Board is an early sample, but performs exactly like the 657 retail I have here.

Finaly Review finished :D tomorrow will update here with Ln2 on memories

all tests done with B2B disable

Here is liquid on memory and phase -30 on cpu

http://forum.nexthardware.com/galler...1_IMG_0261.JPG


http://forum.nexthardware.com/galler..._screen015.jpg

http://forum.nexthardware.com/galler...934/1_2280.jpg
http://valid.canardpc.com/show_oc.php?id=707724

http://forum.nexthardware.com/galler..._screen011.jpg
http://forum.nexthardware.com/galler..._screen013.jpg
http://forum.nexthardware.com/galler..._screen014.jpg

That memory setup is way cool, I am waiting for your subzero tests to see how the sticks scale under cold.

Quote:

---

Originally Posted by raju

That memory setup is way cool, I am waiting for your subzero tests to see how the sticks scale under cold.

---

i love that WB for ram testing
:up:

I ordered that ram heatsinck too to put my cascade evaporator on it :d

Quote:

---

Originally Posted by Pt1t

I ordered that ram heatsinck too to put my cascade evaporator on it :d

---

:up: you'll see
easy insulation :D, with you kit i wanna see +3k :)

Gskill on fire? no on Ice this time :D
Also B2B disable


http://forum.nexthardware.com/galler.../1_2688cl9.jpg
http://valid.canardpc.com/show_oc.php?id=708831

http://forum.nexthardware.com/galler..._screen016.jpg
http://forum.nexthardware.com/galler..._screen019.jpg
http://forum.nexthardware.com/galler..._screen022.jpg

http://forum.nexthardware.com/galler.../1_2650cl8.jpg
http://valid.canardpc.com/show_oc.php?id=708891




http://forum.nexthardware.com/galler...1_IMG_0252.jpg
http://forum.nexthardware.com/galler...1_IMG_0258.jpg
http://forum.nexthardware.com/galler...1_IMG_0262.jpg
http://forum.nexthardware.com/galler...1_IMG_0273.jpg
http://forum.nexthardware.com/galler...1_IMG_0276.jpg
http://forum.nexthardware.com/galler...1_IMG_0283.jpg

hey man, the Italians are on cold again huh , sweet work man

keep pushing it

Haha Hiwa!

You are memory addict for sure! Nice work!

Nice :D

Subzero mem is the way of the future :p:

Quote:

---

Originally Posted by Oliver

hey man, the Italians are on cold again huh , sweet work man

keep pushing it

---

Thanks oli :D ye change temp here in italy :ROTF:

Quote:

---

Originally Posted by SF3D

Haha Hiwa!

You are memory addict for sure! Nice work!

---

Thanks pete
who have this kit can do it easy ;)

Quote:

---

Originally Posted by Gautam

Nice :D

Subzero mem is the way of the future :p:

---

:rofl: yes, we all need to switch sunzero mem, there is just one funny thing in this platform :p:

Quote:

---

Originally Posted by hiwa

Gskill on fire? no on Ice this time :D
Also B2B disable


http://forum.nexthardware.com/galler.../1_2688cl9.jpg
http://valid.canardpc.com/show_oc.php?id=708831

http://forum.nexthardware.com/galler..._screen022.jpg

http://forum.nexthardware.com/galler.../1_2650cl8.jpg
http://valid.canardpc.com/show_oc.php?id=708891

http://forum.nexthardware.com/galler...1_IMG_0273.jpg
http://forum.nexthardware.com/galler...1_IMG_0283.jpg

---

My friend I love these pic, G.skill on ICE are very well :D:D great work!! :up:

thanks, sorry will put in Cas2Cas next

sweeeet RAM pot
got one just like it :D

Quote:

---

Originally Posted by ZillaPct

My friend I love these pic, G.skill on ICE are very well :D:D great work!! :up:

---

:) thanks buddy and yes here is review
http://translate.google.com/translat...heda%2F238.htm
:up:

Quote:

---

Originally Posted by LardArse

thanks, sorry will put in Cas2Cas next

---

without mobo was impossible peter ;) good job as usual
Boot @ 2560 cl8 and 9 without any problem :yepp:
the limitation is IMC (not a bad one but not the best) :(

Quote:

---

Originally Posted by dinos22

sweeeet RAM pot
got one just like it :D

---

haha this is Mips WaterBlock + Duniek NB pot :)

Everest playing :D
226XX 2000 7-7-7-21 ....
http://forum.nexthardware.com/galler..._screen029.jpg

@hiwa

two things. first, how low can you test tRAS and tRFC and can P55 do 6-7-5 or 6-6-5 at any clocks? Could you open cpu tweaker or memset for your future screens?

for tigh cl6 subs sorry i can't test my kit is not special on cl6 and 7

here is tight tRFC and tRRD

http://forum.nexthardware.com/galler..._screen040.jpg

also good RTL set

Great memory package. Great testing. =)

:shocked:

Quote:

---

Originally Posted by GSKILL TECH

Great memory package. Great testing. =)

---

thanks

here is some Everest test with C1E (C3/6/7 enable) :up:

3800 cpu 2400 cl8 memory

http://forum.nexthardware.com/galler..._screen018.jpg

Higher Cpu
http://forum.nexthardware.com/galler..._screen021.jpg
http://forum.nexthardware.com/galler..._screen028.jpg

and here 2000 cl7 beat 2400 cl8 :D
http://forum.nexthardware.com/galler..._screen029.jpg

and 23k 2040 7-7-7-21-60-4 easy
http://forum.nexthardware.com/galler..._screen036.jpg

This memory CAN same working on x58-platform?!

Quote:

---

Originally Posted by BrooT

This memory CAN same working on x58-platform?!

---

yes but in dual channel , exept if you take 2 kits :D

@Hiwa
some awesomely tweaked runs in their, great work!
Normally tRFC 60 can be taken down to 57 without sacrificing any stability.

tFAW looks really high? does tweaker read it correctly or am I confusing it with another timing?

Also does anyone know or have the skill to write a program that will generate a clock diagram based on IMC/RAM timings/clkfreq?

Quote:

---

Originally Posted by Slovnaft

@Hiwa
some awesomely tweaked runs in their, great work!
Normally tRFC 60 can be taken down to 57 without sacrificing any stability.

tFAW looks really high? does tweaker read it correctly or am I confusing it with another timing?

Also does anyone know or have the skill to write a program that will generate a clock diagram based on IMC/RAM timings/clkfreq?

---

dipend on memory for Trfc,i'll try in next runs a bit tighter subs,still don't work on tFAW and other subs tRTP...
maybe eva2000 can help you about tool
Let us know and update here if u found info, should be intreressting.

Quote:

---

Originally Posted by hiwa

dipend on memory for Trfc,i'll try in next runs a bit tighter subs,still don't work on tFAW and other subs tRTP...
maybe eva2000 can help you about tool
Let us know and update here if u found info, should be intreressting.

---

just FYI on my hypers I would set tFAW=20

Gskill too killer :up:

Quote:

---

Originally Posted by Slovnaft

just FYI on my hypers I would set tFAW=20

---

i tried very tight tFAW on X58 :D but on P55 don't work ;)
http://forum.nexthardware.com/galler..._screen005.jpg

8GB Testing

PerfectStorm 2000CL7 + 2200CL8

8GB 2000 7-8-7-21-88-5 1.63 32M +3D 06 passed
http://forum.nexthardware.com/galler..._screen022.jpg
http://forum.nexthardware.com/galler..._screen023.jpg

8GB 2100 8-8-8-24-8-5 1.63 3D 06 paased
http://forum.nexthardware.com/galler..._screen024.jpg


8GB 1700 6-7-6-21-88-5 1.63 32m + 3D06 + Linx 5min passed

http://forum.nexthardware.com/galler..._screen027.jpg

2820 9-9-9- Dual channel with 1,8V Vdimm

Testes with Xeon X3470 under -70° on cheap Biostar T5 XE

http://www.pt1t.eu/public/P55/Biosta...e_ram_2820.png

wow gulftown IMC is going to kick ASS.

Quote:

---

Originally Posted by Slovnaft

wow gulftown IMC is going to kick ASS.

---

Where Did you see Gulftown RAM test ?