Enzotech Rampage II Extreme Northbridge / Southbridge Chipset Liquid Cooling Block

Printable View

08-24-2009, 10:29 AM
Enzo-Tech(Dav)

Enzotech Rampage II Extreme Northbridge / Southbridge Chipset Liquid Cooling Block

http://www.enzotechnology.com/images/as_reii_sn.gif

http://www.enzotechnology.com/images/as_reii_mos.gif

http://www.enzotechnology.com/images/as_reii_ram.gif

ETA: 9/20
08-24-2009, 10:52 AM
Blizzy

Looking great o.o

any internal shots ?

Price ?
08-24-2009, 11:32 AM
Sadasius

Nice to see another choice. :up: Would love to see some internals on this as well.
08-24-2009, 11:34 AM
Vapor

Wow, these really meet my eye well...I like the way they look and the solid-pipe design :yepp:
08-24-2009, 12:01 PM
Malik

Dav one set pleeeeeaaaaseee :D
08-24-2009, 12:06 PM
crustytheclown

looks great...very beautiful!!!
08-24-2009, 12:16 PM
AnjinSan1966

Great design,looks really good!
08-24-2009, 12:17 PM
HESmelaugh

More pics, please! :D
08-24-2009, 12:20 PM
rjkoneill

i would like the mosfet blocks - but your UK distribution makes it difficult
08-24-2009, 12:23 PM
Malik

Dav please tell as more about this blocks. I think that's very good looking set ;)
08-24-2009, 12:25 PM
psyconut713

Quote:

Originally Posted by Blizzy

Looking great o.o

any internal shots ?

Price ?

:slobber::slobber::slobber::slobber::slobber:
08-24-2009, 12:26 PM
Hondacity

WWWWWWOOOOOO thats refreshing..thanks

can we ask for a new nb block..something with flat design instead of looking like a small hill? :D
08-24-2009, 12:38 PM
damtachoa

wow, I like that glossy pipe attach to the block. I wish they can re-design the rampage extreme heatsink with that pipe.
08-24-2009, 05:49 PM
nyeah

if it's at the same price as koolance i'll buy it :D

i see no block for the qpi, or it doesn't need cooling?
08-24-2009, 05:56 PM
Utnorris

Quote:

Originally Posted by nyeah

if it's at the same price as koolance i'll buy it :D

i see no block for the qpi, or it doesn't need cooling?

Third block is the QPI.

Looks sweet, although I would like to see it mounted on the board. I wonder what the diameter of the tube going between the two blocks is? 1/2"? 3/8"? 1/4"?

Also, any Classified blocks planned?
08-24-2009, 06:10 PM
Lu(ky

This version looks like it would fit a Asus P6T Del V1/V2 North side keeping other stock parts attached... Like picture below...

http://i274.photobucket.com/albums/j...reHeatsink.jpg
http://www.enzotechnology.com/images/as_reii_ram.gif
08-24-2009, 10:31 PM
nyeah

Quote:

Originally Posted by Utnorris

Third block is the QPI.

Looks sweet, although I would like to see it mounted on the board. I wonder what the diameter of the tube going between the two blocks is? 1/2"? 3/8"? 1/4"?

Also, any Classified blocks planned?

didn't realize it :D

but it's a shame it doesn't connected directly
08-25-2009, 03:46 AM
Boyu

Quote:

Originally Posted by Utnorris

Third block is the QPI.

Looks sweet, although I would like to see it mounted on the board. I wonder what the diameter of the tube going between the two blocks is? 1/2"? 3/8"? 1/4"?

Also, any Classified blocks planned?

it's look like 3/8, it look kind of small
08-25-2009, 05:12 AM
Malik

Im intresting in that this: Compression Fitting Designed For ID 7/16" (11MM) with OD 5/8" (15.875MM) will work with qpi block.
08-25-2009, 05:55 AM
Tigris STI

Quote:

Originally Posted by Malik

Im intresting in that this: Compression Fitting Designed For ID 7/16" (11MM) with OD 5/8" (15.875MM) will work with qpi block.

Hope it will, but the other question is - how will it look like ? I, personally, also like the sleek minimalistic look if this new QPI block but the problem is that I intend to use 1/2" ID 3/4" OD compressions and have some kind of feeling that it won't look good with them :shrug:
08-25-2009, 06:16 AM
Welshman666

mmm if i decide to get a Rampage i may consider these blocks.... they are very nice
08-25-2009, 08:53 AM
Enzo-Tech(Dav)

Quote:

Originally Posted by Utnorris

Third block is the QPI.

Looks sweet, although I would like to see it mounted on the board. I wonder what the diameter of the tube going between the two blocks is? 1/2"? 3/8"? 1/4"?

Also, any Classified blocks planned?

Yes, EVGA Classified is on the way.

The OD of the copper pipe is 9.8mm
09-24-2009, 12:02 AM
Malik

Still nothing in shops :( Dav when i can buy this blocks ?
09-24-2009, 12:07 AM
Ced-G60

Damn, I just ordered a Kollance Kit... I like this one better... But I can't find it anywhere either.
09-24-2009, 05:14 AM
Ketzer7

Same three. None of the places I've looked at has any of the new Enzotech stuff (i.e. they also show an FC block for the EVGA X58). Is it going to be available soon? The ETA was 9/20 in the OP :)
09-24-2009, 06:15 AM
Caoder

They said october for the similiarly designed EVGA SLI x58 board block... so i'm guessing around the same time?
09-30-2009, 05:10 PM
headala

Any updates on this? I'm really interested in the MOS block.
09-30-2009, 05:22 PM
RADCOM

Why is Enzotech gear so hard to get in the Uk and Europe and when they do have it it's like twice the price of our American cousins! Should I be looking at becoming a reseller :)
09-30-2009, 07:34 PM
headala

Quote:

Originally Posted by RADCOM

Why is Enzotech gear so hard to get in the Uk and Europe and when they do have it it's like twice the price of our American cousins! Should I be looking at becoming a reseller :)

Heh, you can be encouraged that right now we're all in the same boat! :(
09-30-2009, 08:16 PM
NaeKuh

Quote:

Originally Posted by Enzo-Tech(Dav)

The OD of the copper pipe is 9.8mm

Whats the inner diameter?

guys incase ur wondering 9.8mm is less then 3/8.

10mm would be about 3/8.
09-30-2009, 11:13 PM
Waterlogged

Quote:

Originally Posted by NaeKuh

Whats the inner diameter?

guys incase ur wondering 9.8mm is less then 3/8.

10mm would be about 3/8.

3/8" = 9.525mm ;)
10-23-2009, 01:23 PM
punkrockpolak

So, about this... Anyone see this yet?
10-23-2009, 03:02 PM
Feklar

I contacted them at the beginning of this month and they said it was due to be released sometime next month (November).
10-23-2009, 03:05 PM
autobot

It generally takes Enzotech about 2 or 3 months before an announced product is actually available. So these new motherboard blocks should be available around Christmas time.
10-24-2009, 01:19 AM
affiliate13

Ive emailed their support twice, been ignored twice too.:shakes:
Bought EK blocks instead:rolleyes:
10-24-2009, 07:00 AM
nyeah

Quote:

Originally Posted by affiliate13

Ive emailed their support twice, been ignored twice too.:shakes:
Bought EK blocks instead:rolleyes:

yea same for me, but ii bought BP block instead :rolleyes:
10-29-2009, 01:33 AM
headala

Unless they come up with something soon, I'm going to go BP or Koolance as well. Paper launches suck.
10-29-2009, 01:42 AM
Tackleberry

I love the look and pearl like shiny color:up:

@crustytheclown And I adore your avatar. May I use it on my ID card?PLIZZZZZ:p:
11-21-2009, 03:27 PM
Malik

Something new about this block ? Are they available in EU ?
11-21-2009, 04:59 PM
Edward88

Frozen cpu have them ;)

No one have try them???

I really would like to see them before i make a decision
11-21-2009, 08:00 PM
bigx333

I'm wondering if the AS-REII-MOS would fit in a P6T6, the mosfet area looks really like as in the R2E and the black freezer's fit on both :confused:
11-22-2009, 01:26 AM
Malik

Quote:

Originally Posted by Edward88

Frozen cpu have them ;)

No one have try them???

I really would like to see them before i make a decision

But this in not in EU :)

FrozenCPU.com
311 East Chestnut Street
East Rochester, NY 14445
11-22-2009, 11:57 AM
Edward88

Quote:

Originally Posted by Malik

But this in not in EU :)

FrozenCPU.com
311 East Chestnut Street
East Rochester, NY 14445

Know! :p

I dont know what i was thinking :p

By the way malik, i have r2e too. I know that you try diferents blocks with it, which one do you recommend?
11-22-2009, 01:09 PM
Malik

Quote:

Originally Posted by Edward88

Know! :p

I dont know what i was thinking :p

By the way malik, i have r2e too. I know that you try diferents blocks with it, which one do you recommend?

I will made custom mode block for qpi :)
11-22-2009, 01:36 PM
Edward88

Lol!

Looking forward for seeing that :p

Do you think that bp full cover solution + mosfets, worth it?
11-22-2009, 01:46 PM
Malik

Quote:

Originally Posted by Edward88

Lol!

Looking forward for seeing that :p

Do you think that bp full cover solution + mosfets, worth it?

This one: LINK

I think that is good idea. If you don't have yet any set for this mobo, and you want have cool qpi - buy this set from bipi.

All times are GMT -8. The time now is 02:00 PM.

XtremeSystems