Project: my lil LianLi v2000

Actually I don't have that much time at all but well, my GF's tower looks like :rofl:
Atm she uses my old Skulltrail for video and audio editing so it is time for a nice tower too and ofc watercooled :D

But I think I gonna buy her a new Nehalem server board too, we'll see.

The tower, a v2000:
http://alexiel.stor.li/v2000/04.08.%20front.jpg
http://alexiel.stor.li/v2000/04.08.%20mb.jpg

Alrdy unmounted the hdd racks to have room for the watercooling equip.

The watercooling will consist of:
1x XSPC Quad Radiator
2x XSPC Dual Radiator
1-2 Laing D5 (depends if 1 or 2 loops)
EK Res
black 19/13 tubing
Bitspower comp fittings
Feser One clear/blue uv fluid

The idea is, to mount the quad, one dual and the pumps in the bottom area and one dual in the top.
Gonna use a Lian Li psu extender to get more room in the bottom area for the watercooling and mount a Koolance shroud at the top.

At first, the top. Taped the shroud to have a look how it will fit:
http://alexiel.stor.li/v2000/08.08.%20koolance.jpg
And a few minutes later, the jig saw did the rest ^^
http://alexiel.stor.li/v2000/08.08.%...e%20fertig.jpg
There should be enough room for the second radiator in the front part of the shroud.

Hope that the other parts will arrive at the weekend so I can go on. I alrdy replaced the stock LianLi fans with some Enermax Everest and gonna replace one of the bay covers with a hot swap hdd cage from LianLi.
But atm, I don't know which fans I gonna use for the radiators. They should be strong enough but on the other hand I don't want any fan controllers.

That's all for now, hope I can show you more during the next days =)

nice cable management there, i love the V2000 builds! completed mine yesterday hehe

good luck! :up:

ty =)
I love em too but actually it is to small for my system ^^

btw: any recommendations for the radiator fans? don't want to use any fan controllers and on the other hand, they should be strong enough...

Quote:

---

Originally Posted by sargatanas

btw: any recommendations for the radiator fans? don't want to use any fan controllers and on the other hand, they should be strong enough...

---

For applications without monitoring/controller, I've always had success with the Scythe S-Flex SFF21F model. :up:

Or you can go for gentle typhoons, many belive they preform better than the Scythe S-flex's cause they have higher static pressure, if your running without a fan controler, id personally go for either 1450's or 1850's......they make virtually no noise!

i have two 1850's atm, waiting for 4 more to be deliverd..... there is litraly NO stock of these fans in the uk at the moment :(

well they aren't in stock at local shops too...gonna have a look for some fans so i can place the last order.
my side panels should be laser cutted atm...hope they arrive on monday ^^
the watercooling parts should arrive these days so i can finally go on.

Looking foward to this log - hoping to steal some ideas :)

well I gonna give my best since this is made for my gf :D
I will use some slipstream 1200 till the scythe gt's are available.
at least, the panels are done and rdy to ship =)
http://alexiel.stor.li/v2000/22.08.%...echts%20fertig
http://alexiel.stor.li/v2000/22.08.%...links%20fertig

looking good, will be interested as to how the rads will be fitted in the bottom with the PSU :up:

Out of curiosity, how many hard drives are you planning to put into this beast? One thing I've noticed about all the "beautiful" WC builds is that they've got a lot of flexibility chopping off hard drive mounting brackets, etc, because they tend to have a minimal amount of HDDs. I'm looking forward to seeing what you are doing with this guy :)

Good to see the v2000 still has it :)

Quote:

---

Originally Posted by diredesire

Out of curiosity, how many hard drives are you planning to put into this beast? One thing I've noticed about all the "beautiful" WC builds is that they've got a lot of flexibility chopping off hard drive mounting brackets, etc, because they tend to have a minimal amount of HDDs. I'm looking forward to seeing what you are doing with this guy :)

---

well that's true but it depends on the tower too. for example, I have 9 hdds and 2 ssds in my mm and could mount a few more ^^
but for the v2000...well I will use the lian li ex-h34 hdd cage for 4 drives. don't know where to mount the 2 ssds atm, maybe at one of the fans, directly to the 5,25" plate or maybe somewhere else :D

the bottom part will be for the watercooling parts but I have to wait for the radiators to check the possibilities.
my first thought was to mount one dual in the front part of the top and a dual + quad at the bottom. on the other hand, I should be able to mount a quad at the top and a triple + quad at the bottom...well I have to wait till the parts arrive, at least I ordered 2x dual, 1 triple, 2 quad xspc to have all options left :)
and in the end...my gf has to decide :rolleyes:

Quote:

---

Originally Posted by sargatanas

well that's true but it depends on the tower too. for example, I have 9 hdds and 2 ssds in my mm and could mount a few more ^^
but for the v2000...well I will use the lian li ex-h34 hdd cage for 4 drives. don't know where to mount the 2 ssds atm, maybe at one of the fans, directly to the 5,25" plate or maybe somewhere else :D

the bottom part will be for the watercooling parts but I have to wait for the radiators to check the possibilities.
my first thought was to mount one dual in the front part of the top and a dual + quad at the bottom. on the other hand, I should be able to mount a quad at the top and a triple + quad at the bottom...well I have to wait till the parts arrive, at least I ordered 2x dual, 1 triple, 2 quad xspc to have all options left :)
and in the end...my gf has to decide :rolleyes:

---

That's true ;)

I know what it's like having a "boss." I was just curious because I have 10 HDDs, no SSDs (yet) and I'm working in a LL V1000 :eek:

I just bought one of the ABS/Tagan black pearl cases (V2000 rebadge), and i was curious to see what others are doing. I have an EX-34NB 3:4 converter, but it won't help me much if I need at least 6 other bays. I still have to look around at the layout of the case to really decide what I want to do...

I always enjoy your builds sargatanas, I'll be watching this one as well. At least if you go missing for a while, we know the lady friend was not happy about the design decision you made. :D

u could use 2 ex-34, keep one of the original hdd racks and there should still be enough room for a triple at the bottom ^^

well I think she will like it since she uses a very old one, something like these old IBM towers xD
...hope I can finish my external unit after this one =)

subscribed, looking forward to seeing this thing finished. Looking good so far :up:

few case parts arrived today and the tower is already loaded with feser ^^
http://alexiel.stor.li/v2000/24.08.%20feser.jpg
the hdd cage or shall I say, a hdd trap?
http://alexiel.stor.li/v2000/24.08.%20hdd1.jpg
http://alexiel.stor.li/v2000/24.08.%20hdd2.jpg
http://alexiel.stor.li/v2000/24.08.%20hdd3.jpg

it's a bit longer than I thought but it still fits =)
http://alexiel.stor.li/v2000/24.08.%20hdd%20mounted.jpg
but actually...I think I won't be able to mount the Velociraptors, think their sata/power connector is different. gonna check that later on.

the psu extender, don't know if I will use it. could gain 6cm but on the other hand it would stand outside the case
http://alexiel.stor.li/v2000/24.08.%20psuextended.jpg

but I have a huge problem....this is my last one :(
http://alexiel.stor.li/v2000/24.08.%20drpepper.jpg
have to order some or I won't be able to go on :D

hehe, I drink Dr Pepper when I build my systems too! I had about 10 on the final day of building before the noreaster lan :rofl: the builders drink of champions :up:

looking great so far :yepp:

well it isn't that easy to get dr pepper @ germany :(
this works too :D
http://alexiel.stor.li/v2000/24.08.%20ouzo.jpg
cools the whole system but to much + summer temperatures = causes system shutdown :D

still thinking bout the front...think it would look better if the dvd drive would be at the lowest spot...but then, there is no possibility to mount the bezel.
http://alexiel.stor.li/v2000/24.08.%20front.jpg

the hdd cage is quite nice, have to hide the key for it :D
only thing that suxx is that the connectors are pointed at the wrong direction.

I like that hot swap bay, pretty nice. The length is actually good, covers that gap perfectly.

I had some time today and thought I should check the psu extender.
took the dremel and few minutes later it was done ^^
http://alexiel.stor.li/v2000/25.08.%20psu1.jpg
http://alexiel.stor.li/v2000/25.08.%20psu2.jpg
http://alexiel.stor.li/v2000/25.08.%20psu3.jpg

but well I don't know if I should keep it or take the other backplate again.
about 6cm more space and the psu fan is pointed in the right direction but on the other hand, it's 6cm standing outside the case.

I don't think it's that big of a deal if you have your computer against a wall, or something, you'll hardly see it.

Think of it this way, you can hide a can or two of Dr. Pepper back there as a secret stash http://www.xtremesystems.org/forums/...ilies/rotf.gif

well that's true :D
but at least the panels arrived a few minutes ago :cool:
http://alexiel.stor.li/v2000/25.08.%20panelrechts.jpg
http://alexiel.stor.li/v2000/25.08.%20panellinks.jpg

+ a lil gift :yepp:
http://alexiel.stor.li/v2000/25.08.%20gift.jpg

that PSU extender is nice man. Did you make it yourself, or did you buy it?

The panels came out great!

the extender is made by lian li. only increased the hole to fit the psu through the plate ^^

Side panel modification seems good but only negative issue is that you will not see your reservoir when you look your panel directly. By the way, you should hide your cables on bottom well.

Keep up the good work mate. :up:

ofc, all the other cables will be sleeved and hidden too ;)

well it doesn't matter at all that I won't be able to see the reservoir after bleeding.
but it depends on the angle, u can actually look at the reservoir to check if everything is ok
http://alexiel.stor.li/v2000/25.08.%20mbmounted.jpg

The panels did come out great.

Why so much view on the bottom though?

well this was my first idea
http://alexiel.stor.li/v2000/panellinks2.jpg
but it was to risky that the stripes probably bend during cutting.

finally, the other parts arrived these days:
http://alexiel.stor.li/v2000/29.08.%20d5.jpg
feser clear/uv blue and mastercleer black/uv blue
http://alexiel.stor.li/v2000/29.08.%20feser.jpg
http://alexiel.stor.li/v2000/24.08. feser.jpg
http://alexiel.stor.li/v2000/29.08.%20tubeuv.jpg
http://alexiel.stor.li/v2000/29.08.%20tube.jpg

actually I made a lil mistake with the width of the radiators...so I have to mount them a bit different than I thought since I don't buy other radiators.
http://alexiel.stor.li/v2000/29.08.%20quad1.jpg
http://alexiel.stor.li/v2000/29.08.%20quad2.jpg

gonna mount the second dual at the midplate...
http://alexiel.stor.li/v2000/29.08.%20bottom1.jpg

...and mount the other one at the top
http://alexiel.stor.li/v2000/29.08.%20dualtop.jpg
http://alexiel.stor.li/v2000/29.08.%20dualtop2.jpg

looking good mate, cant wait to see this one all finished!

Good thing it's on wheels :p:

Nice build...I'll be watching :)

looking good! Are you running 1 or 2 pumps for your setup??

thx guys =)
well don't know yet, maybe I'll add a second pump or just split it in 2 loops.

Quote:

---

Originally Posted by sargatanas

thx guys =)
well don't know yet, maybe I'll add a second pump or just split it in 2 loops.

---

Could grab that new top skinnee just posted :P. It looks pretty shweet.

mh don't know. gonna check that later on.
and a lil update: finished the side panels
http://alexiel.stor.li/v2000/30.08.%20mesh1.jpg
http://alexiel.stor.li/v2000/30.08.%20mesh2.jpg

I like your choice of case. Your mods are very unique and makes a TJ07 look bad. Heh I am looking forward to the end of this build. You should use some nice UV colors because I like it. HAH Have fun as I am having fun reading this

good job man

LIAN LI should start producing this case again with the looks of the v2010, huge bottom space of the V2000 and inverted atx , and maybe 8x 5.25" :P

that would be a BOMB of a case:)

yeah the v2000 is just perfect.
would love to see a tower like the v2000 but with even more space ^^

I thought about the v2000 and came to the conclusion that won't work for her.
There is just not enough room for all hdd's at all.
She will get my second MM Ascension and I gonna take the v2000 for my second system. It's way better for a workstation board + watercooling + the amount of hdds.
So there will be another log for that one too =)

Let's get back to the v2000.
http://alexiel.stor.li/v2000/31.08.%20quad1.jpg
http://alexiel.stor.li/v2000/31.08.%20quad2.jpg
the quad fits perfect but the dual won't fit at all cause the quad is a bit to high.

but I had an idea, actually I do not need a dvd drive, so lets mount the dual at the front
http://alexiel.stor.li/v2000/31.08.%20dualtop2.jpg
and the other one a bit further
http://alexiel.stor.li/v2000/31.08.%20dualtop.jpg
gonna mod the original hdd racks and mount em in the bottom too, so there won't be a prob at all.
but there would be no possibility to mount 2 gpus. Or I could get a 295gtx.

Don't know yet which way to go:
1. use the quad + 1 dual for cpu+mb+1-2gpus
2. use the quad + 2 dual for cpu+mb+1 gpu

What do you think? Would the quad + dual (fans @ push'n'pull) enough for lets say the mb, a i920 and uhm 2x 4890's ?

hmmm, im gonna say be safe and use all the rads. But there is a way u can also have 2 gpus with all those rads. don't mount it on the top. U can either sandwich the two smaller ones together in the front racks. Or u can re-arrange the whole setup. mount the quad on the floor board, ur gonna have to cut up that floor board though. and then u should have room in the bottom for the 2 duals, sorta sandwiched together. Give it a try before doing anything else, it should work.

Btw, did u cut the side panels on ur own? Im looking to do something similar to my v2k but using a feser 360 and 240.

hm gonna give it a try to sandwich em. I wanted to mount the hdds at the bottom, so there is no room for any radiator and it will stabilize the tower.

the sidepanels were laser cut ;)

Alright tell me how the sandwich goes.
Btw i only have a small hdd holder from the v1000 in my v2k. stability isn't really an issue for my v2k.
Mind telling me where u got it laser cut? i need to get my v2k project up and running already lol.

well it would actually work but sry for the pic quality ^^
http://alexiel.stor.li/v2000/31.08.%20sandwich3.jpg
http://alexiel.stor.li/v2000/31.08.%20sandwich2.jpg
http://alexiel.stor.li/v2000/31.08.%20sandwich1.jpg

yeah I know that stability isn't a prob at all but that would work perfect. better stability + room for 4 hdd ^^
well do u live in germany? otherwise won't work ^^

Quote:

---

Originally Posted by sargatanas

yeah the v2000 is just perfect.
would love to see a tower like the v2000 but with even more space ^^

---

me too, bigger basement (30cm high ( top room 35cm high? or even higher, (40cm ? :P)

that would be a bomb case

come on lian li, read this and start producing it !

wow are you running two 2x120mm in the drive cage? you should just run the 4x120mm on the bottom with a 2x120mm vertically mounted imo. Btw, are those the silverstone rd09 mounting brackets for the radiator?

Nice panels man. I'm really digging the clean cuts with the mesh.

Quote:

---

Originally Posted by sargatanas

well it would actually work but sry for the pic quality ^^


yeah I know that stability isn't a prob at all but that would work perfect. better stability + room for 4 hdd ^^
well do u live in germany? otherwise won't work ^^

---

Glad it worked.
And no i don't live in germany lol. But does the company do international?

Quote:

---

Originally Posted by idleuser

wow are you running two 2x120mm in the drive cage? you should just run the 4x120mm on the bottom with a 2x120mm vertically mounted imo. Btw, are those the silverstone rd09 mounting brackets for the radiator?

---

Those brackets look like the Aquacomputer ones. I was trying to get a hold of some but they're near-impossible to find.

http://www.kustompcs.co.uk/acatalog/info_7925.html

Quote:

---

Originally Posted by Oli4v

me too, bigger basement (30cm high ( top room 35cm high? or even higher, (40cm ? :P)

that would be a bomb case

come on lian li, read this and start producing it !

---

uhm yeah. like 30cm basement and let's say 10x5,25" :D

Quote:

---

Originally Posted by idleuser

wow are you running two 2x120mm in the drive cage? you should just run the 4x120mm on the bottom with a 2x120mm vertically mounted imo. Btw, are those the silverstone rd09 mounting brackets for the radiator?

---

Quote:

---

Originally Posted by eponymous

Those brackets look like the Aquacomputer ones. I was trying to get a hold of some but they're near-impossible to find.

http://www.kustompcs.co.uk/acatalog/info_7925.html

---

you are right, these are from aquacomputer.

Quote:

---

Originally Posted by cobra_kai

Nice panels man. I'm really digging the clean cuts with the mesh.

---

ty :)

Quote:

---

Originally Posted by Tim1

Glad it worked.
And no i don't live in germany lol. But does the company do international?

---

well it is possible to mount them but the problem is that I'm not able to mount the drive bay covers.
don't know if he does but I could ask him.

You got some really good progress out there my friend. I liked your mesh work a lot, it looks pretty original actually. Congratulations. :up:

Cheers,
Arthur

did some tubing today but still don't know which gpu it might be :)
http://alexiel.stor.li/v2000/02.09.%20tubing.jpg
http://alexiel.stor.li/v2000/02.09.%20tubing2.jpg

and a few cables are alrdy hidden
http://alexiel.stor.li/v2000/02.09.%20cables.jpg

mh don't know yet but I could mount 1 radiator like this:
http://alexiel.stor.li/v2000/02.09.%20raditest.jpg

Quote:

---

Originally Posted by sargatanas

......

http://alexiel.stor.li/v2000/02.09.%20raditest.jpg

---

please don't pursue this idea :(

Quote:

---

Originally Posted by dro

please don't pursue this idea :(

---

+1
That looks hideous! How about a new mid-plate in the case and mount the rad to that??? I've been toying with the idea of getting a Black Pearl and doing exactly that. :)

already thought about a new midplate.
cuts for a dual +cables/tubes. gonna get one laser cut + new backplate for the psu :)

Hi Sargantas! Great build so far I love the case! I was wondering if you could do a quick point and shoot for me if you have a spare 3x120mm laying around or just point out where the 3rd fan from the front ends? I'd just like to see where that end point is so I can guage whether or not my 320mm will fit there and I'll be able to use some of the pins covered up on the mobo. Thanks!

Quote:

---

Originally Posted by dro

please don't pursue this idea :(

---

Yes, this is not 'so' elegant solution than the others.:rolleyes:

nah I won't mount a radiator outside the case. I'll give it a try with the quad and the dual.

uhm Stvwndr219 have a look at page 2. I mounted the dual in the middle of the 4 fans, so it's the same like a triple. the shroud won't give you more space in height, it's the same like mounting it directly to the top plate.
hope these 2 more pic gonna help you but keep in mind, that these only show the end of the fan.
http://alexiel.stor.li/v2000/04.09.%20fans1.jpg
http://alexiel.stor.li/v2000/04.09.%20fans2.jpg

checked some locations for uv, looks ok for me
http://alexiel.stor.li/v2000/04.09.%20uv3.jpg
http://alexiel.stor.li/v2000/04.09.%20uv2.jpg
http://alexiel.stor.li/v2000/04.09.%20uv1.jpg
http://alexiel.stor.li/v2000/04.09.%20uv4.jpg
damn reflection...but you won't see the uv cathodes =)

Finally I was able to go on. Alrdy tested the pc with some of the parts from the mm. But after all, I had time to get an i7 920, 2 Sapphire Toxic 4890 and found 6gb 1600 Gskill in my cupboard.
Cute one isn't it :D
http://alexiel.stor.li/v2000/ati4890.jpg
http://alexiel.stor.li/v2000/12.09.%20ati.jpg
Quite a tight fit...a gtx 28x wouldn't fit at all. There would be more space if I turn the radiator about 180° but that doesn't matter at all since this isn't the gaming pc =)
I've alrdy ordered a second 4890 cause it's a bit lonely :D and ofc 2 EK blocks for em.

The i7 920 looks promising, only 0,87v-0,9v @ stock load...could be a nice overclocking one.

Had no time atm to go for overclocking since I'm working on my Mountain Mods/Deathangel6 too but I hope I make progress this weekend.

looking nice, how you like the 4890?

well actually I am a bit impressed by the stock cooler and didn't know that I bought the overclocked versions...
quite silent compared to the 4870 and it does its job well.
funny one is, it has a higher win7 index than my 3way :D

Quote:

---

Originally Posted by sargatanas

well actually I am a bit impressed by the stock cooler and didn't know that I bought the overclocked versions...
quite silent compared to the 4870 and it does its job well.
funny one is, it has a higher win7 index than my 3way :D

---

three way? you had tri sli 280's right?


Well I had a Sapphire 4870, the cooler sucked when it sped up man, it was loud as hell!

well I'm using 3x280 (at 750/1614/1150) in my main rig, well at least till there are benchs from the gt300/5870.
the single 4890 has an index of 7, the 3x280 only 6,4 and I doubt that the single 4890 is as fast as the oced 3way ^^
but well, doesn't matter, it's just a poor m$ index which doesn't show the true performance.

I had 2 sapphire 4870 too...even at idle loud as hell and almost 70-80°c.
the 4890 stays quite cool and u don't recognize the fan at all but well doesn't matter, the blocks should arrive on monday =)

quite a busy day today since I'm working on my main rig and the external unit too...changed the fans for some 1200 slipstream and some enermax everest (the 17 kaze 3000 were getting on my nerves :ROTF: ), started to sleeve the pcie cables of the silverstone.
ok the red tubes are looking damn ugly with blue fans, gonna change that too.

the 920 could be a nice one, first test with 20x200 & 1,3v worked flawlessly @ 45-50°c at load.
gonna check max core speed and minimum vcore tomorrow =)

Quote:

---

Originally Posted by sargatanas

well I'm using 3x280 (at 750/1614/1150) in my main rig, well at least till there are benchs from the gt300/5870.
the single 4890 has an index of 7, the 3x280 only 6,4 and I doubt that the single 4890 is as fast as the oced 3way ^^
but well, doesn't matter, it's just a poor m$ index which doesn't show the true performance.

I had 2 sapphire 4870 too...even at idle loud as hell and almost 70-80°c.
the 4890 stays quite cool and u don't recognize the fan at all but well doesn't matter, the blocks should arrive on monday =)

quite a busy day today since I'm working on my main rig and the external unit too...changed the fans for some 1200 slipstream and some enermax everest (the 17 kaze 3000 were getting on my nerves :ROTF: ), started to sleeve the pcie cables of the silverstone.
ok the red tubes are looking damn ugly with blue fans, gonna change that too.

the 920 could be a nice one, first test with 20x200 & 1,3v worked flawlessly @ 45-50°c at load.
gonna check max core speed and minimum vcore tomorrow =)

---

thank god they improved the cooling for the 4890, the 70's as we both said were pretty loud and hot. I also agree that the index is wrong, the 3 way sli setup should outperform a single 90 by a good margin!

All that cooling just for the CPU & NB and aircooled graphics cards ?
Im liking ur work tho, going to finalize my own V-2000 build soon, just having trouble deciding radiator placement :up:

Heya, I'm sorry for the delay but I was quite busy.

@hewi:
Actually, I wanted to watercool the 2 4890s too. But maybe I just switch the GPUs as soon as I have some new ones for my main rig.

At the moment, I'm working on the v2000 and my main one.

v2000:
Changed the fans to add some airflow
http://alexiel.stor.li/v2000/08.11.%20radiator.jpg
http://alexiel.stor.li/v2000/08.11.%20radiator2.jpg
http://alexiel.stor.li/v2000/08.11.%20radiator3.jpg

But at the moment I have to finish the main one.
First step:
Rebuilding the external unit
Bought some huger 400 EK Res's, the old ones were just too small and some Feser Fluid.
http://alexiel.stor.li/single%20stag...20ek%20res.jpg
http://alexiel.stor.li/single%20stag...1.%20feser.jpg
Don't know why or how...but seems like that there was a lil rest of the red Feser...and now...well it looks pink
http://alexiel.stor.li/single%20stag...deathangel.jpg

Loop setup:
loop 1/cpu: res -> D5 -> 3x360 -> D5 -> Cpu -> res
loop 2/gpus: res -> D5 -> 2x360 -> D5 -> Gpus -> res
loop 3/mb: res -> D5 -> 360 -> Mb -> res

I will add the sensor displays and the mesh later on.

And the main rig. Actually I love my Mountain Mods Asc but there is a reason for switching the cases. U'll see why later on too =) (maybe someone finds the lil hint at the pics, why I choose the smaller Lians)
http://alexiel.stor.li/single%20stag...ianlifront.jpg
http://alexiel.stor.li/single%20stag....10.%20hdd.jpg
http://alexiel.stor.li/single%20stag....11.%20hdd.jpg

System is the same like before, just added a new Silverstone Strider 1500 and 2 Intel Postville.
And pls don't kill me for the cable management ^^ I'm glad that I had enough time to switch the cases but ofc, gonna do that cause it looks like %/&$ atm ;)
http://alexiel.stor.li/single%20stag....%20system.jpg
http://alexiel.stor.li/single%20stag...%20system2.jpg
http://alexiel.stor.li/single%20stag...%20system3.jpg

That's all for the moment. Hope I have more time to sleeve and hide all these ugly cables.

Holy cow dude! WOW man, massive airflow! Massive loops

sry for the delay, still waiting for the single stage....
at least some new parts arrived today :)
http://alexiel.stor.li/ati%205970.jpg
and a lil, naked cpu for benching
http://alexiel.stor.li/intel%20w3520.jpg

ordered some ek blocks...hope they will arrive early next week.
more updates of sleeving, tower mods and so on as soon as the cam battery is loaded.

5970's! Some nice hardware, can't wait to see this finished already.

hey sargatanas, nice system you got there. quick question, what brand are those temp displays on your Lian Li PC-A71F build.

think should be innovatek ones but I changed em since they didn't work very well with the aquacomputer sensors.
ordered some new scythe ones with phobya sensors.

at least I had some time to mount the gpu blocks :)
http://alexiel.stor.li/single%20stag...2.%20atiek.jpg

drool:O lol nice work man!

how did you attacht the mesh to the sidepanels?

planning to do smth similar to mine (catched a v2000b up in january), bit inspired by yours, only mine's gonna be 3 loops I hope, or at least 2