Trying to take down the big boys (Andre) in 3DMark 2006. Quad GFXS!

Still alittlebit low efficiency, but hey.. second place in the world after OPB got banned from Hwbot.org. Next is 4 cards on LN2, 1100/1100 should boost the scores alittle :D.. hell, I want that first place..

I was in the lead in "lords of overclocking" over at FM until one hour before it ended, I checked FMs sites on a vorspiel/foreplay (whatever its called in english) and got SHOCKED by benchbrothers.. hell, I was drunk then.. couldnt bench :(.. so I decided to take them down afterwards :D

Gotta love the germans ;) Thanks for the asskick Jens!! Love you bro.

This Xeon seems capable, any bids..? :D

I stole OPBs/Jodys HR-03GT mod, I ran with piser before.. seems to work great!

Intel Xeon W3540
EVGA Classified E759
Corsair Dominator GT 1866
4 x ASUS 4890 (one with new cooler)
Corsair HX1000w (yes, ONE psu for this setup.. about 1150w peak in canyon flight :D)
CPU pot by Stoolman called "stoolcan", running -145C with bad sensor.. temps is around -160C
Selfmade MDF "benchtable".. ;)

Will post a picture of ELEET later.. iam using the vcore button(s) on ECP from EVGA.. it rocks!


[/IMG]http://www.diskusjon.no/index.php?ac...post&id=307476

http://www.diskusjon.no/index.php?ac...post&id=307477

http://www.diskusjon.no/index.php?ac...post&id=307478

http://www.diskusjon.no/index.php?ac...post&id=307479

http://www.diskusjon.no/index.php?ac...post&id=307480

Hot damn, nice score. Still a little left to gain with memory/IMC if you can work with lower multi + higher bclk. Looking forward to seeing these cards on cold. Hurry up though, I believe Vince and Shamino are getting together later this month :p:

Quote:

---

Originally Posted by [XC] gomeler

Hot damn, nice score. Still a little left to gain with memory/IMC if you can work with lower multi + higher bclk. Looking forward to seeing these cards on cold. Hurry up though, I believe Vince and Shamino are getting together later this month :p:

---

no chance of running higher uncore.. :( I tried...

hell, Sham + Vince.. might as well sell my rig :D

xtremely impressive mate...keep pushing!

Nice work my friend:up: I run only 36.2k with Quad 4890:( over 950mhz gpu's always problem :mad: But it's enough for FM asia:p: did you mod Classified for Quad CF (Sham's sytle)?

Quote:

---

Originally Posted by Brandybuck

Nice work my friend:up: I run only 36.2k with Quad 4890:( over 950mhz gpu's always problem :mad: But it's enough for FM asia:p: did you mod Classified for Quad CF (Sham's sytle)?

---

thanks ALOT youngpro, its been a LONG time since I talked to you.. good old days.. ;)

brandybuck: the board is not modded, runs like a champ still :) I tried to run with two psus, BUT it :banana::banana::banana::banana:ed up the two last cards, onboard fan went ALL over the place.. spinning up and down.

Killer score dpa, wel done mate :up::yepp:

Wow!! Nice score DPA:up: That Corsair PSU is working over time!:shocked: Are you going to use the mod posted here somewhere so you don't fry the plug??

Edit; Sorry, slow connection...question asked already:D

Impressive score dpa....well done... keep pushing it.... :up:

Sorry, man. My 37.6K is triple CF, not QFX.:D

wicked results & cpu! cant wait to see the LN2 results with 4 gpu pots going!! I hope you have a friend or two to pour for you :D

Quote:

---

Originally Posted by dpa

Gotta love the germans ;) Thanks for the asskick Jens!! Love you bro.

---

Thanks mate. :toast:

As I told you we had another session yesterday. Here is what we got:

http://www.planet3dnow.de/vbulletin/...1&d=1245132470

To be honest we believed that we are in front of you. :D But it seems that we have to do better.

Unfortunately Rampage II Extreme is the limiting factor here. Cpu-tests run perfect up to 5.36 ghz with less then 1.6 volt under cascade (-96 degrees) but gametests crash or slow down massively.

crazy fighting from the germans.. :)

5.36Ghz cpu test at rampage is sick.. and with 4,8Ghz uncore.. my max is 3.7 :(

thanks for positiv response from all!!

I guess Andre has a backup :)

Congrats on second place.

Awsome job Haakon :clap:

Quote:

---

Originally Posted by AndreYang

Sorry, man. My 37.6K is triple CF, not QFX.:D

---

You are evil :ROTF:

Quote:

---

Originally Posted by Marco André

You are evil :ROTF:

---

Andre is c o c k y as hell.. ;)

Well done dpa :toast: congratz on the score :)

great work dpa , lately youve really stepped up the game and been pushing it hard huh

well deserved

keep pushing it

Great work Haakon!

I have to start looking a good CPU too, so I can join the race!

insane score .......keep pushing..:up::up:

thanks all!

my voltages via eleet; (+0.1v vcore by ECP panel from EVGA)

http://www.diskusjon.no/index.php?ac...post&id=307632

Hell of a rig there. :D

Quote:

---

Originally Posted by dpa

Andre is c o c k y as hell.. ;)

---

Ain't that the truth. :p:

awesome results! Nice benching there!!!

Quote:

---

Originally Posted by mikeguava

awesome results! Nice benching there!!!

---

thanks all and mike!

show me that 38k score you are talking about.. gotta have something to aim at :)

Awesome! :up:

Big numbers!!

Yesterday we had a first test with Classified E760 and our Xeon W3540 together with ln2. We could reach this:

http://www.benchbrothers.de/bilder/a...06_37668_s.jpg
(click for larger version)

compare-url

Unfortunately efficiency isn't really good. But we have to deal with a horrible coldboot-bug at -27 degrees. Once the system is up and running we can reset and reboot normally. But once we change uclk, memory-timings and/or qpi-settings, the system shuts down completely and we only can boot again when the temperature is at -27 or less.

So we just set "safe" uclk and memory-timings and started to look for max frequency of our xeon. It passed cpu-test at 5,460 mhz but at full run it only reached frame 39 of cpu-test #2. So maybe with finetuning we can pass the whole benchmark at this frequency.

Quote:

---

Originally Posted by MusicIsMyLife

Yesterday we had a first test with Classified E760 and our Xeon W3540 together with ln2. We could reach this:

http://www.benchbrothers.de/bilder/a...06_37668_s.jpg
(click for larger version)

compare-url

Unfortunately efficiency isn't really good. But we have to deal with a horrible coldboot-bug at -27 degrees. Once the system is up and running we can reset and reboot normally. But once we change uclk, memory-timings and/or qpi-settings, the system shuts down completely and we only can boot again when the temperature is at -27 or less.

So we just set "safe" uclk and memory-timings and started to look for max frequency of our xeon. It passed cpu-test at 5,460 mhz but at full run it only reached frame 39 of cpu-test #2. So maybe with finetuning we can pass the whole benchmark at this frequency.

---

20 points~:up:

Yeah, we noticed that you are only 21 points ahead. But I think you are safe for the next few weeks. We have a few litres ln2 left (maybe 15 litres) but the next two to three weeks we don't have time to bench.

If we can tweak the whole system right I think we can come close to 38k with it. :yepp:

ALL of you, are lossing the Crossfire at GT3....
Run it alone or pick it with the GT4 to run them together and you will see what I mean... ;)

Quote:

---

Originally Posted by MusicIsMyLife

Yeah, we noticed that you are only 21 points ahead. But I think you are safe for the next few weeks. We have a few litres ln2 left (maybe 15 litres) but the next two to three weeks we don't have time to bench.

If we can tweak the whole system right I think we can come close to 38k with it. :yepp:

---

that cpu score is high!! any tweaks? got a 760 myself now, but no time to test.. :( very nice scores Jens!

I just tested the E760 fast on LN2 with four 4890s.. I think I got the EXACT same score as hipro in 06, at a tad lower clock.. 5.3Ghz cpu.. screen is ofcourse on the bench harddrive, will ship it over as fast as possible.

I bumped the uncore up to about 4200Mhz on this run, but the coldbug appeared earlier than before, I was at -115C when it started bugging. I ran about -140C before, anyways.. I will test this board some more, seems to my that 100Mhz = 1000 points in 06.. 38k should be very possible at 5.4Ghz.

http://www.diskusjon.no/index.php?ac...post&id=312862

Was waithing for some updates from you. Glad to see you back on your rig after EM.
Hope you make 38k soon!

:up:
dpa M8.......Uncore is one secret to get high scores... ;)
I've spent ~ 440lt+ of LN2 ONLY for 2k6.... :)

George you are one crazy guy !
The world is soon to be on LN2 crisis if you keep on going that way, that is truly insane man !!

big boys are down ;)

http://plaza.fi/s/f/editor/images/hof_06.png

Lets see the backups: http://www.futuremark.com/community/...fame/3dmark06/

Quote:

---

Originally Posted by dpa

I bumped the uncore up to about 4200Mhz on this run, but the coldbug appeared earlier than before, I was at -115C when it started bugging. I ran about -140C before, anyways.. I will test this board some more, seems to my that 100Mhz = 1000 points in 06.. 38k should be very possible at 5.4Ghz.

---

That sounds like the IMC coldbugging rather than the processor core. When you hit the coldbug at -115°C, did you try increasing the uncore frequency and/or uncore voltage (VTT)?

@ Sampsa: This is with the 9.6 Drivers - because I don't see anywhere in FM that are approved and I see yours are approved.... :)

Quote:

---

Originally Posted by hipro5

@ Sampsa: This is with the 9.6 Drivers - because I don't see anywhere in FM that are approved and I see yours are approved.... :)

---

They are approved, but not yet updated to their site. Try yourself ;)

Quote:

---

Originally Posted by Sampsa

They are approved, but not yet updated to their site. Try yourself ;)

---

OK - Thanks... :D

Quote:

---

Originally Posted by hipro5

:up:
dpa M8.......Uncore is one secret to get high scores... ;)
I've spent ~ 440lt+ of LN2 ONLY for 2k6.... :)

---

lol, 440lt.. haha..!

this still is not my best score.. but if I can manage to run this cpu at same settings and 5.4Ghz+ I will break 38k with a blast :)

the E760 IS faster than my old E759, tried some 4.2Ghz action, and it runs 200-400 points faster.

going for 5.38Ghz later, ran cpu tests at that yesterday :D

Quote:

---

Originally Posted by massman

That sounds like the IMC coldbugging rather than the processor core. When you hit the coldbug at -115°C, did you try increasing the uncore frequency and/or uncore voltage (VTT)?

---

I ran high VTT for this, but havent tried to bump the uncore YET.. iam having the -60 coldboot thing.

how high is high? :D

Quote:

---

Originally Posted by massman

how high is high? :D

---

I believe its about 1.57v.

1.57v should be enough to warm up the IMC at least a bit; I reckon that, as you say, bumping the frequency might help. Or else you can just go bezerk on the VTT, :p:

Quote:

---

Originally Posted by massman

1.57v should be enough to warm up the IMC at least a bit; I reckon that, as you say, bumping the frequency might help. Or else you can just go bezerk on the VTT, :p:

---

ill give 20x a run later... :) just bought a 24 pack of kneaded eraser :D

If 20x doesn't work, test 21x or 22x ... uncore multipliers on i7 are weird :p:

Quote:

---

Originally Posted by massman

If 20x doesn't work, test 21x or 22x ... uncore multipliers on i7 are weird :p:

---

just hoping I have enough LN2 for all that :banana::banana::banana::banana: :)

Quote:

---

Originally Posted by Sampsa

big boys are down ;)

http://plaza.fi/s/f/editor/images/hof_06.png

Lets see the backups: http://www.futuremark.com/community/...fame/3dmark06/

---

Here you go.


http://www.iamxtreme.net/andre/38284.JPG



Any backups? Who knows.;)

Quote:

---

Originally Posted by dpa

38k should be very possible at 5.4Ghz

---

Good luck, that would be killer to see.

Quote:

---

Originally Posted by AndreYang

Any backups? Who knows.;)

---

Here we go! :up:

@AndreYang : INSANE....................:up::up::up:

okey..

COULD the classified 760 coldbug before the 759...?

I have NO chance in h ell of reaching even -130.. I ran at -145 before. exact same settings.

Quote:

---

Originally Posted by dpa

okey..

COULD the classified 760 coldbug before the 759...?

I have NO chance in h ell of reaching even -130.. I ran at -145 before. exact same settings.

---

i have test just one Classified 759 , coldbug at -120°/-125° with 4 x i7 D0 (but the cpus were better at -90°/-100° :)

Iam now limited to about -105C under load.. sucks.. testing some uncore;

http://www.diskusjon.no/index.php?ac...post&id=313088

Quote:

---

Originally Posted by SF3D

I have no idea why Haakons thread have been spoiled like this!

---

Neither do I. I'll be cleaning this up in a little bit...

Quote:

---

Originally Posted by dpa

Iam now limited to about -105C under load.. sucks.. testing some uncore;

http://www.diskusjon.no/index.php?ac...post&id=313088

---

yes it's depends of cpu ,it's "generally" best between -90/-100 ° but there is always the exception that proves the rule :)

my 975 make 5.45ghz at 3dmark05 between -99° and -105° (under my caskade 2 stages) but I need to test under LN2 soon for see the best temp for it (maybe -90°, maybe -120° or more) the i7 are strange with the cold (because of control memory and I think maybe other things) ...

I have removed the ES discussion not because there was anything wrong with it, but because it doesn't belong here. Hope you guys understand.

new record at 150Mhz lower cpu clocks, trying high uncore..

http://www.diskusjon.no/index.php?ac...post&id=313138

Nice score! little bit more tweaking an you got 38k!

That is so nice... Wish i had a system like that to play with, but ill have to stick to 2D for a while

iam giving it hell tomorrow, hoping for 38k.

edit; pic for l.oco

http://www.diskusjon.no/index.php?ac...post&id=313140

Oh! Oh!

Uncore looking very good! :D

Thanks a lot, 4th card is really tempting :D HX1000 is strong :up: Good luck on 38k

Impressive uncore:clap:
VTT?
Thx

Quote:

---

Originally Posted by gandalfone

Impressive uncore:clap:
VTT?
Thx

---

1.62v I think.

bumping the coreclocks on gfxs gives boost in GT3/4.. Petri, where is your 1200Mhz bios??? :D

1200Mhz core would give a 270fps GT3 with clocks at 5.4Ghz, maybe even more..

Quote:

---

Originally Posted by dpa

1.62v I think.

bumping the coreclocks on gfxs gives boost in GT3/4.. Petri, where is your 1200Mhz bios??? :D

1200Mhz core would give a 270fps GT3 with clocks at 5.4Ghz, maybe even more..

---

maybe that huge vtt is making the cold bug come earlier or maybe you are using more/less vcore than you used to.

This is heading somewhere!

How's the new insulation working out?

I admire your determination to get that WR dpa !
Excellent results man, keep pushing it, you are almost there :up:

minor setback.. the eleet profiles is NOT working as they should!

https://www.evga.com/forums/tm.asp?m=653551

The change takes about 8-9sec.. so I tried everything from cpu test to canyon flight. the problem is not the change I believe, its just that the fps goes -+5 ALL the time. places where the fps should be steady 160, the fps is 160-155-160-155-160-155.. any tips? I have a CLOSE to 38k score if this works like it should :D



Higher uncore? :D

* ELEET saves ALL your settings at the current point of time of 'save profile', and will start polling every voltage etc according to this profile when you hot key it. Now, if all you want is to change clockspeeds, then go into your ELEET directory, under profiles folder, open up the profile with a notepad. Delete away all the voltage adjustments, this will shorten a time to load a profile.

i added this info

-edit oops sorry somehow i edited your post!!! I didnt know i can do that!!

finally!!

http://www.diskusjon.no/index.php?ac...post&id=313281

Quote:

---

Originally Posted by dpa

minor setback.. the eleet profiles is NOT working as they should!

https://www.evga.com/forums/tm.asp?m=653551

The change takes about 8-9sec.. so I tried everything from cpu test to canyon flight. the problem is not the change I believe, its just that the fps goes -+5 ALL the time. places where the fps should be steady 160, the fps is 160-155-160-155-160-155.. any tips? I have a CLOSE to 38k score if this works like it should :D



Higher uncore? :D

* ELEET saves ALL your settings at the current point of time of 'save profile', and will start polling every voltage etc according to this profile when you hot key it. Now, if all you want is to change clockspeeds, then go into your ELEET directory, under profiles folder, open up the profile with a notepad. Delete away all the voltage adjustments, this will shorten a time to load a profile.

i added this info

-edit oops sorry somehow i edited your post!!! I didnt know i can do that!!

---

* ELEET saves ALL your settings at the current point of time of 'save profile', and will start polling every voltage etc according to this profile when you hot key it. Now, if all you want is to change clockspeeds, then go into your ELEET directory, under profiles folder, open up the profile with a notepad. Delete away all the voltage adjustments, this will shorten a time to load a profile.

38K is yours soon.:up:

Jeez your smokin haak :clap: 38k is yours for sure. Try higher uncore yet?

Quote:

---

Originally Posted by k|ngp|n

Jeez your smokin haak :clap: 38k is yours for sure. Try higher uncore yet?

---

so mr.uncore.. you want me to go higher than 5000Mhz NB freq..?

LardArse: thanks for the input on freq. do you have any tips on the fps not being steady..?

i asked peter the same thing about eleet
nvm >> will test and report

would be nice to have it change withing a second
heh

great scores dpa. doing really well :up:

Quote:

---

Originally Posted by dpa

so mr.uncore.. you want me to go higher than 5000Mhz NB freq..?

LardArse: thanks for the input on freq. do you have any tips on the fps not being steady..?

---

run an nvidia vdieo card? :P j/k
its just some thing many users face , i think 4890/4870 crossfire has this symptom, sometimes it felt like too cold or too high cpu frequency,m but doest explain why nvidia cards dont exhibit this

Quote:

---

Originally Posted by LardArse

run an nvidia vdieo card? :P j/k
its just some thing many users face , i think 4890/4870 crossfire has this symptom, sometimes it felt like too cold or too high cpu frequency,m but doest explain why nvidia cards dont exhibit this

---

:D

I only get this problem when I use eleet profiles to fix cpu speed.. (the not steady fps)

Quote:

---

Originally Posted by dpa

so mr.uncore.. you want me to go higher than 5000Mhz NB freq..?

LardArse: thanks for the input on freq. do you have any tips on the fps not being steady..?

---

hehe yah for sure haak try up to 5300mhz! :D

Quote:

---

Originally Posted by k|ngp|n

hehe yah for sure haak try up to 5300mhz! :D

---

max it can do is 5280Mhz uncore thru 06.. 24x wont work at 5.3Ghz cpu speed :D

Holy moly thats nice, you get a boost?

Quote:

---

Originally Posted by k|ngp|n

Holy moly thats nice, you get a boost?

---

yes, please do tell....very nice 06 benching your doing dpa:up:

Quote:

---

Originally Posted by k|ngp|n

Holy moly thats nice, you get a boost?

---

I get a tiny boost...

http://www.diskusjon.no/index.php?ac...post&id=313260

cheating...
http://www.hwbot.org/hwbot.post.do?postId=1107

Quote:

---

Originally Posted by railmeat

WHY? :shrug:

---

A bit OT, but PLEASE stop quoting pics...

starting my Bachelor in Finance this year (now actually).. so, selling all my gear, sorry guys.. no more benching from me :(

Best of luck, I'm sure you'll be back sometime :up: