Micron GTS on dice

Printable View

06-11-2009, 04:23 PM
Nanok

Micron GTS on dice

Hade some dice left from bench, and decided to abuse my OCZ 1600 7.6.6
They are my best kit out if 5 or 6 iv hade, bench stabel at + 800 6.5.5.16 2.1V

Pot with some g.skill 8000HZ
http://peecee.dk/uploads/062008/Billede8.jpg

5.4.4.15@2.45V
http://peecee.dk/uploads/062009/screen008.jpg

6.5.5.15@2.45V
http://peecee.dk/uploads/062009/screen003.jpg

Superpi 1m was stabel around the same speed as everest
06-12-2009, 01:09 AM
Mafio

good work mate...1000+ cas6 is awesome

which mobo did you use???
06-12-2009, 01:13 AM
Kabauterman

Everest says Rampage Extreme ;)
06-12-2009, 02:12 AM
Nosfer@tu

Great Job Nanok :D

Like always you deliver power :D
06-12-2009, 02:13 AM
Sam__

Great work!!
06-12-2009, 02:18 AM
teurorist

nice rampage :)
good work
06-12-2009, 03:15 AM
Shahryar_NEO

great work mate .
06-12-2009, 03:35 AM
iddqd

now try the same thing without dice
06-12-2009, 06:41 AM
tech

oh no???....
good result..!!!
06-12-2009, 08:15 AM
audigy

excellent, Cas 6 1000mhz :shocked::shocked::shocked::up:
06-13-2009, 02:29 AM
Nanok

Quote:

Originally Posted by iddqd

now try the same thing without dice

Without extreme cooling is not posibel sure.
06-13-2009, 06:38 AM
saaya

very nice :toast:
did your mem degrade at all after that session?
06-13-2009, 06:59 AM
Mean Machine

Nice frequencies... Might I just ask, how do you insulate your pot? I have one of your pots, wrapping them in paper doesn't seem to be enough. (Mobo is of course insulated around the mem sockets)
06-13-2009, 08:02 AM
WaterFlex

Very well done :up:
06-13-2009, 08:36 AM
Gautam

Badass, awesome work. :clap:
06-13-2009, 08:22 PM
Nanok

Quote:

Originally Posted by saaya

very nice :toast:
did your mem degrade at all after that session?

The ram did not degrade at all, i did not want to "push" to hard becourse it was my best, and only kit.
The mainboard was Insulated with eraser, around the dimms.
The rampot was Insulated with Armorflex tape, i can make pic. later and post if you want.
By the way, i wold like soo see your result with rampot Mean Mashine !
06-13-2009, 08:33 PM
zanzabar

what kind of timings dose a good gts kit normally do with 800mhz on an x48 on air
06-13-2009, 08:57 PM
Hyperhorn

Nice RAM-OC from you again. I like that you prefer tight timings and no lazy MHz hunting. Congrats, awesome results! :up:
Maybe I should finally use your RAM-pot (same model, bought 2nd hand), I`m just watching it for months. :rolleyes: Atm my limit for my 2 x 1 GiB D9GTR are 2.03 V for reasons of safety^^, but that`s good enough for >800 MHz 6-5-5-13 @ SPi 32M (or 6-5-5-14 @2.00) at least. 5-4-4 should give an very nice extra boost for my lowclock competition. :D
06-14-2009, 07:40 AM
Mean Machine

Quote:

Originally Posted by Nanok

The ram did not degrade at all, i did not want to "push" to hard becourse it was my best, and only kit.
The mainboard was Insulated with eraser, around the dimms.
The rampot was Insulated with Armorflex tape, i can make pic. later and post if you want.
By the way, i wold like soo see your result with rampot Mean Mashine !

I'm more than happy to oblige. Crucial Ballistix PC16000 9-9-9-24 these are, 2.48V. Just a pretty quick test. D9GTS as well.
http://img132.imageshack.us/img132/9020/1024c6.th.jpg
http://valid.canardpc.com/show_oc.php?id=584940

That was at about -75c. The weird thing is that the mems run absolutely fine even at -130c, I never went below that. There's probably some more to gain, I think the NB was the limiting factor.
06-14-2009, 07:46 AM
iddqd

Quote:

Originally Posted by Nanok

Without extreme cooling is not posibel sure.

should be. capacitors are the limiting factor, right? so as long as you can cool them down enough to prevent failure, you should (theoretically) get the same results.
06-15-2009, 03:58 PM
Nanok

Cooling on ram works, or else everybody would run at those speeds.
06-15-2009, 05:30 PM
M.Beier

Impressive work John, however, I cant help wondering whats wrong with the 1060mhz, the BW seems very low, might be PL or strap :(
5.3ghz and 1060mhz ram 6-5-5- I would have expected above 16GB/s
06-16-2009, 02:21 AM
Nanok

pl9 strap 400
06-16-2009, 02:22 AM
dejanbinladen

omg this is brutal latency on that freq :shocked:
06-16-2009, 05:42 AM
iddqd

Quote:

Originally Posted by Nanok

Cooling on ram works, or else everybody would run at those speeds.

I'm still curious what this ram can do without dice ;)
06-16-2009, 07:14 AM
Nanok

Quote:

Originally Posted by iddqd

I'm still curious what this ram can do without dice ;)

Im not willing to put 2.45V without better cooling than air, call me sissy boy :rolleyes:
06-16-2009, 12:35 PM
iddqd

Quote:

Originally Posted by Nanok

Im not willing to put 2.45V without better cooling than air, call me sissy boy :rolleyes:

so that's what it is
06-20-2009, 07:23 PM
Sn0wm@n

any pic of the actual setup how tight it is on a mobo?????
06-20-2009, 07:34 PM
TheGoat Eater

Nanok - this was done with the EVGA - I am bewildered how it is higher than your DICE score - was probaby 2.25v and air cooled - with DICE cold runoff
http://www.xtremesystems.org/forums/...1&d=1221085738
06-20-2009, 08:24 PM
Gautam

790i naturally owns everest read.
06-20-2009, 08:50 PM
Mean Machine

Quote:

Originally Posted by TheGoat Eater

Nanok - this was done with the EVGA - I am bewildered how it is higher than your DICE score - was probaby 2.25v and air cooled - with DICE cold runoff

The CPU frequency also makes a difference, and you can't really compare between chipsets. Also, if 790i was good, everybody would've bought it...
06-22-2009, 09:10 AM
Vivi

Guys your missing the point.

Nanok just checked his max read.

all of us know, pl9 and strap 400 is the weakest ass strap there is. If he is at strap 266 (2:3) or 333 with PL8 and that freq the score would be WICKED. but he didnt have FSB to support it.

its a SICk result tho. really insane stuff nanok :D
AND MM , loving the ram vibes.