Printable View
benching with Sacha35,Raja on Shamino's Evga Classified
cooling: King pin cpu F1
cpu:retail 920 DO
m/b:Evga classified
Ram: Corsair Dominator GT 7-8-7-20 6GB
http://valid.canardpc.com/show_oc.php?id=558456
http://www.benchtec.co.uk/images/raj...9/web/bclk.jpg
http://www.benchtec.co.uk/images/raj...web/06-248.gif
http://www.benchtec.co.uk/images/raj...b/P1000886.jpg
:eek:no coldbug? I am going to change my C0:)...very nice result
Good work, Corsairs seem exciting!
Cold boot on this CPU at -160 we ran out of LN2. The CPu just keeps scaling and we're on the wall for BCLK HT on up here. More info when we all get back home. tried the same CPU on another board CB only -128. Classified rules plain and simple!
regards
Raja
ye raja
that's nice chip there
congrats for great 920 and very nice classi
astonishing work Basx , Paul & Raja , u got a wolf in sheep clothes ehe
beg up
bahhah I7 920@ 5.2ghz+ nice!!!
Every second thread here is evgas king + D0 :D
Another great score :up:
Someone to break 10k score in CPU test? :)
this has been one of the strangest overclocking days for a long time
today was intended to be a setup and test some 295s with king pins new gpu pots for paul (sasha35) who has a show going down next week @ scan computers
raja brought his classified and now famous 920 round so we would have the best combo to try out working 3x pots
now we had thought the chip toped out @ -130 but after a little testing the chip and m/b finaly toped out @ -190 in windows with a cold boot @ -160 for the bios
now totally distracted from our original goal we started to bench the card that was in the unit 2x4870
and did not get back to the 295s in the end as we just ran out of Ln2
this 920 is just nuts it just keeps giving the cooled you take it
Very nice to say the least. :)
Very nice indeed -188C and 250+ bclk!!
We almost had 250BCL pass 06, but were just pouring the LN2 into the pot during the 06 CPU test. CPU only draws 150w or so at 5.2Ghz in that test, the pot holds good deltas upto -150. Paul was on pouring duty and timed the pull up to a T to bring it back to -160 for idle in OS. BIOS was preset with my cascade settings, so it was almost a case fo fire and go. We just did not anticpate the CPU scaling like this under cold and it sure was a fun thing to do.
later
Raja
i have to say i am as surprised as any one its been a long time since i have seen an Intel chip as cold as this and still running
very enjoyable day
Amazing :eek: , no cold bug on that chip , great chip , great going guys.
chispy.
That is the fastest chip in the Universe!! No one will ever beat those clocks.
You guys must have had a blast.:eek:
Congrats to all of you. :up:
I know what Barrie looks like - Is that picture of Paul or Raja?
That's Paul, I've never seen a pic of Raja, he likes to be mysterious:)Quote:
Originally Posted by runmc
Lol, I'm not that photogenic tbh..
Sick! Congratulations guys!
That CPU would definitely need higher multiplier :shocked:
Raja's mom sent me this, it was the last pic anyone had of Raja.... (great work guys... )
http://img510.imageshack.us/img510/1871/swinej.png
-186 no couldbug...awesome...
Are you saying raja is the one who started the Swine flu epidemic?Quote:
Originally Posted by bingo13
Bazx are you guys going to have at it again anytime soon?
Go BenchTec!!!
Perhaps in a while Ron, I'd like to check out a W3540 too and see how it does. I dunno if I'm gonna be fortunate enough to find another CPU like this one though.
regards
Raja
As i said before this is mental well done boys. I wish i lived in pop round for a cuppa distance:rofl: I look forward to seeing more:up:
BCLK is just sick!!!!
What's max valie for it in bios?
my DFI has only 250
wow... awsome clock...
great chip...:up:
This Classified is incredible :cool:
nevermind the chip etc etc
this board is plain nuts!!!!!!
awesome stuff fellas :up:
Whats this "show" at scan?
It was a good day’s experience we all had, I must say this combo has surprised me also guys as the very low temps in which it could boot and bench at are just un-heard off, I think the benchmark and Bclock says it all.
I cannot wait until we get our hands on this setup again as a lot of ln2 went into finding settings ECT so next time we should be able to run a few more benches.
As for the event I will be attending this is the info: (Scan event) All are welcome to come and watch the action.
I think we also got a boost from your patented NTTS (neoprene thermal transfer system) Paul. :rofl:
Now you know how my secret on how we can get things to run that bit colder, it's all down to the NTTS :yepp:Quote:
Originally Posted by raju
Fantastic! I have the Classified sitting here staring at me now. It's my current memory validation and gaming rig but it is just begging to be OCed. I'm just waiting on a 2000C7 kit and a D0.
Good luck at the SCAN event! Of course, we all want more pix. Someone use a spy cam and get a shot of Raja.
i have the image already:DQuote:
Originally Posted by Yellowbeard
Nice work guys, looks like a lot of fun :)
With or without the :banana::banana::banana::banana:stache? :rofl:Quote:
Originally Posted by bazx
damn MikeQuote:
Originally Posted by Yellowbeard
they always make you wait for good stuff :rofl::D
Terrifying combo I might say, both the Classified and that small dirty bustard (I'm talking of course about the i7 920 D0 you guys have) are simply :eek2:
Good luck on your future overclocking attempts guys ! :up:
Quote:
Originally Posted by Yellowbeard
Do you think we should chip in and buy Mike a set of Blades :rofl::sofa:Quote:
Originally Posted by dinos22
Believe it or not Mike the Elpida is kinda mandatory for stable BCLK benching over 240 on 2:8. The older modules sporting the early 1.65V stuff don't sit well with the i7 IMC up there. I suspect interchannel clock skews and drive strengths to be the issue, but we'll never get control of those as that is not how i7 rolls on that end. Everything is done on the 'matic so BIOS engineers only have to really apply start up timing for power cycles and MRC/MSR setting. Without the Dom GT, some of these benches would not have been possible.Quote:
Originally Posted by Yellowbeard
later
Raja
Quote:
Originally Posted by sacha35
Speaking of temps, I'm thinking of getting one of Otti's pots. I think the extra mass will help us out below -150...
regards
Raja
hey,Quote:
Originally Posted by raju
Great review on anandtech! I saw you compared kingston memory vs dom gt.. you met a wall at 231Mhz with kingston?
Haakon
yeah, could not get the HT stuff to pass on 3d any higher. 2:6 was better for 32m and Wprime but did nothing to make the CPU test of 06 scale on the older memory.
regards
Raja
Wow quite an amazing 920 you have there :up: I love the -188... intel needs to make more chips like this one!
omg congratulations :) push harder we want 5.5ghz!!!!!
Oh man, I am definitely looking forward to using this combo. Classifed, right here beside me, 2000C7 GT on the way, 920 DO on the way, and now I need a proper bracket for my SS LS-1 Jinu modded unit.
I am impressed...
My C0 cant reach -80C
-186 is amazing
Congratulations
Grats, -186c is amazing!
Gio my UD5 hat 1200 :DQuote:
Originally Posted by OverDozeD
but ....U Know what i mean ? :P
Classified is only board able to go over 250Bclk!
Nforce200 takes too much last from NB away
It mustnt handle GPUs directly
thats what this board gains for Bclk
and of course Genial Bios and everithing is perfect
just price ! :D