-
TecnoFront HWD Bench Table/Case PleXiGlass Triple Radiator
-
WaterCooling Setup :
1 x Ybris® ECLIPSE FULL CHROME S775/1366
1 X Ybris® A.C.S.-G FULL CHROME L.E.
1 X Flow Trap
1 x SANSO PDH 054 12V Attacchi filettati
1 X TFC Xchanger - Triple Radiator 360
3 X TFC Xtender - Radiator Shroud 120 -
1 x TFC Stop Fitting - G1/4 - with O-Ring
3 x Feser Tube - ID 3/8 OD 1/2- UV BLUE
2 x TFC Fitting 45° G1/4 3/8ID - 1/2OD - High Flow
8 x TFC Raccordo compressione G1/4 3/8ID - 1/2OD - High Flow
10 x Swiftech BGA RAM SINK MC14
AC Ryan Blackmagic2 - UV
3 x Scythe Slip Stream 120mm Case Fan - 1900rpm
Vizo Starlet UV LED Fan - 120mm blue
Zalman ZM-MFC1 Plus - black
2 X nanoxia IceGlow blue100ml
-
-
sort of like:
http://www.virtual-hideout.net/revie...ew1_600w_F.jpg
Very nice design!
How thick is the acrylic? Can you Get custom colors?
-
-
Quote:
Originally Posted by
DarthBeavis
sort of like:
Very nice design!
How thick is the acrylic? Can you Get custom colors?
no i think they have just clear
i think it's the first with 360 radiator support
:up:
-
Quote:
Originally Posted by
hiwa
no i think they have just clear
i think it's the first with 360 radiator support
:up:
Two 360 rads . . . on my desk at this moment ;)
http://img406.imageshack.us/img406/1...4037497088.jpg
-
That's a nice case. I was debating on getting the Microcool Banchetto 101 but this looks like it is possibly a little more flexible with better airflow for the rad i.e. you've got a separate deck for the rad and pump whereas on the 101 the pump looks like it is fairly close to the rad and the rad is drawing air from the psu, hd cage etc. Maybe this doesn't matter too much though.
-
nice made DarthBeavis i ment the first native 360 radiator support ,i think for 99.90 euros it's really cool
-
Where did you order this from Darthbeavis?
-
Quote:
Originally Posted by
DarthBeavis
Two 360 rads . . . on my desk at this moment ;)
ohhh my one and only time to outdo the lord of bling so ima take this oportunity.
twin 480's on the simular case DB showed ya.
http://i125.photobucket.com/albums/p...a/IMG_1339.jpg
http://i125.photobucket.com/albums/p...a/IMG_1341.jpg
Hey OP how much was that rack?
-
Quote:
Originally Posted by
mhw100
Where did you order this from Darthbeavis?
Danger Den Torture rack w/ top panel
-
Quote:
Originally Posted by
mhw100
Where did you order this from Darthbeavis?
should be in stock soon in us and europa dunno exact date sorry
mine is a sample
-
Quote:
Originally Posted by
NaeKuh
Hey OP how much was that rack?
:rofl: Why does this sound like you just asked a chick how much she paid for a boob job? :rofl:
-
Quote:
Originally Posted by
Waterlogged
:rofl: Why does this sound like you just asked a chick how much she paid for a boob job? :rofl:
Well if hiwa is a girl and has a boob job, that can be another question to ask as well.
-
Quote:
Originally Posted by
NaeKuh
but you have 90s on there so it is a banable offense ;) check out the mobo in mine ;)
OP, if they make that case with thicker panels and with configuration options it say with would be awesome . . . .as it is, it is a nice option for our brothers over the pond.
-
they are both good but the only difference is the tecnofront has another comparment for your rads
-
Quote:
Originally Posted by
DarthBeavis
but you have 90s on there so it is a banable offense ;) check out the mobo in mine ;)
:rofl:
nah according to martin's numbers im fine. :rofl:
-
It's a nice looking bench, but a little tall, and it could really do with provisions for aiming a fan at the socket area, which is often the first place to start heating up once you start using water.
-
Just had a reply from the company who said they are selling to Frozen and PPCs. Didn't give a date but the implication was soon.
-
-
-
-
-
-
[QUOTE=Waterlogged;3745932]What are these made of?
Looks like Nylon.
-
Quote:
Originally Posted by
aspire.comptech
Quote:
Originally Posted by
Waterlogged
What are these made of?
Looks like Nylon.
I sure hope so . . because to me, they have the shine of a "certain metal with a certain electrochemical process". ;)
-
Quote:
Originally Posted by
Waterlogged
Black PVC ;)
-
Quote:
Originally Posted by
hiwa
Black PVC ;)
Excellent news :up:
-
-
You guys seen the Banchetto Tech station? Much better looking but missing the bottom rack. Still room for a 120x3 rad or two 120x3 vertical rad mount.
Sidewinder link.
http://www.sidewindercomputers.com/miba101clmoc.html
A build link, only CPU watercooled.
http://www.ocforums.com/showthread.php?t=594060
Mine shows up today, build will begin.
-
How stable is this thing? I like the Torture Rack because you can pick it up and carry it with no problem. You use them as LAN cases.
-
it's stable u can carry it without any problem
-
-
nice 18 by 12 inches sure is a small footprint for this rack.
any pictures of you lifting this piece?
-
Would like to see it with UV blue acrylic and these cathodes in teh columns (make them clear with hollow centers):
http://www.performance-pcs.com/catal...dneonanime.gif
-
Man that is a sweet bench, had the torture rack and it was too small,
using my H2go as bench now, but it looks like this bench covers it all..
Very Very Sweet.
this pick sells it to me.....
-
-
now you should spend some time quitting smoking ;) hate to see all that fine building skill go to waste
-
-
Nice Review !
The Spacing is for "normal" Radiator (not Thermochill), am i right? Possible to get 2 Loops on it ?
Btw you can order it from http://www.aquatuning.at/product_inf...ock-Plexi.html
I´m going to buy a benchtable soon, but haven´t decided yet, which one to get
-
Thanks for showing this. Now I can work with 'friends' to design one only better ;)
-
Here is my Tech station, Banchetto, Sidewinders has it.
http://i245.photobucket.com/albums/g...hettofront.jpg
-
Quote:
Originally Posted by
Conumdrum
you forgot the case walls
-
Awsome bench station. I also like the one at sidewindercomputers. looks fancy.
-
Quote:
Originally Posted by
Mpetrosino
Awsome bench station. I also like the one at sidewindercomputers. looks fancy.
This is from Sidewinders.
Darth, who needs walls? I guess your starting to think inside the box, getting older?
-
Quote:
Originally Posted by
Conumdrum
....starting to think inside the box, getting older?
I am always thinking of getting inside of the box! :up:
-
Quote:
Originally Posted by
Conumdrum
This is from Sidewinders.
Darth, who needs walls? I guess your starting to think inside the box, getting older?
I meant the Banchetto like Conumdrum. Which Bench are you using?
-
Spiffy looking station. You certainly manage to pack a lot of stuff into it :)
I still like wood better :p:
-
Quote:
Originally Posted by
CyberDruid
I still like wood better :p:
<Insert>
That is what she said
</Insert>
-
-
So when and how could I get one of these in the U.S.?
Looks very nice! I want one.
-
Quote:
Originally Posted by
Spoiler
So when and how could I get one of these in the U.S.?
Looks very nice! I want one.
I wrote the company who said they will be retailing them out of Performance PCs. I believe there are some European sites that already have them. You cannot order direcly from the manufacturer.
-
-
Quote:
Originally Posted by
DarthBeavis
Two 360 rads . . . on my desk at this moment ;)
Nice, looks alot like mine...:D
Except I did 480's on each side..
http://img401.imageshack.us/img401/5...rklog13op4.jpg
http://img401.imageshack.us/img401/2...rklog14tz9.jpg
Nothing fancy, but it works well for my needs.:up:
-
Quote:
Originally Posted by
Martinm210
...snip...
Nothing fancy, but it works well for my needs.:up:
:rofl: Says the guy with built in flow meters. :rofl: :up:
-
gah...I need a new bench! This thread is making my wallet wince.
-
Nice case design. There really is some quality cases coming out these days, spoilt for choice :)
-
nice and big enuf to fit my ma's Karaoke machine...
maybe i can watercool that one...
but very nice..
love the pass thru's...
-
I just bought this case. For some reason seeing every picture include the 5.25" bay res, the res on the side and all the fan grills
http://img196.imageshack.us/img196/6...fronthwd01.jpg
I assumed that that came with the case. I could be wrong, but I thought normally when you are at a site that sells things and all the pictures shows the item you are interested in as having alot of different parts and nowhere does it say "xx part not included", then it is reasonable to assume that it comes with it. Especially considering it's $179. Well, appearntly it does not. Also, this case does not come with an On/Off or reset switch, so be sure you have other options to turn the computer on, otherwise you are SOL.
Ok, np. However mine came without the HDD rack as well and I should diffinently have gotten that. Gonna give it till maybe tuesday to see if PPC and Technofront comes through with mailing me the missing part, before I see about a refund.
-
Heres mine, waiting for GTX 295 to get back from RMA :(
http://img195.imageshack.us/img195/4249/dsc01215u.jpg
-
Will the Airbox 360 fit a TC PA120.3? I assume it is 15mm spacing and not 25mm spacing. I would love to get one if it does.
-
Quote:
Originally Posted by
Waterlogged
What are these made of?
snip (img)
I'm sure you could have made the same guess, but I would say black nylon or acetal, maybe polyproplyene.
-
Quote:
Originally Posted by
bluehaze
Nice Banchetto, I'll hopefully have mine fully together next week.
-
Quote:
Originally Posted by
tamu80
Will the Airbox 360 fit a TC PA120.3? I assume it is 15mm spacing and not 25mm spacing. I would love to get one if it does.
Does anyone know the answer to this...I can probably guess, but I can't find a damn thing on thier website about it!
-
Quote:
Originally Posted by
iandh
I'm sure you could have made the same guess, but I would say black nylon or acetal, maybe polyproplyene.
Well, that's what I was hoping they were but, I couldn't rule out anodized alu due to the way the fittings shined in that image. As it turned out, they are PVC. :up:
-
Sorry to bring up this thread, just wanna ask if the part below can be replaced by an metal version? Or does one exist? Thanks in advance.....
http://photodorp.com/images.php/i264_IMG1215.jpg
-
Quote:
Originally Posted by
maxxx
This is the closest I have come up with. I have spent hours looking for bulkheads.
http://www.performance-pcs.com/catal...ducts_id=24000
-
-
Quote:
This is the closest I have come up with. I have spent hours looking for bulkheads.
Thanks for the reply. Was hoping that there would be some metal counterpart for it.
Quote:
Looks like nylon to me.
Read in earlier post that they are PVC.
-
Quote:
Originally Posted by
maxxx
Sorry to bring up this thread, just wanna ask if the part below can be replaced by an metal version? Or does one exist? Thanks in advance.....
sure, you can use any "Schott-Fitting" or metal fillport for replacing those plastic connectors !
http://www.aquatuning.de/index.php/l...n/cPath/50_140
-
TFC fillport looks like it will fit...
-
Got a question for those that own the Tecnofront HWD. I am looking at buying one and want to make sure that my Rampage Extreme III motherboard will fit without hanging over the front edge as it is an inch deeper than my old x58 mobo. If anyone can take a quick measurement for me I would greatly appreciate it.
-
-
Sorry to derail... but lowfat.. how do those ssd's compare to revo's?
-
Quote:
Originally Posted by
NaeKuh
Sorry to derail... but lowfat.. how do those ssd's compare to revo's?
The ioXtreme? For small file queue depth = 1 files it stomps the competition. Even huge RAID arrays don't even come close. However in real world performance there is almost no different between this any most other SSD's. http://smiliesftw.com/x/embarasseddance.gif
I doubt it would be worth the $12/GB that it costs for most people.
-
Thanks a lot lowfat. My wallet just cried out in pain when I saw that picture. Definitely getting one of them now. Appreciate it.