Silverstone Raven

Printable View

03-23-2009, 01:26 AM
ben549

Silverstone Raven

I’m just going to start this thread with general information that usually gets requested anyways

Silverstone Raven WORKLOG
http://www.flickr.com/photos/2734171...7615770135803/

Current hardware:
Case: Silverstone Raven RV01
CPU: Intel QX6850 (up to 4ghz)
MOBO: EVGA 790i FTW
MEM: 4GB Super Talent Project X D3-1800
GPU: Custom Case Mod EVGA 9800GX2 with EK-FC9800 GX2 Nickel-Plated
HDD: 4x 150GB WD Raptor X Drives, 2x SAMSUNG Spinpoint F1 1TB
Vista Ultimate 64bit - Raptor X’s in Raid 0
XP Pro 32bit - Raptor X’s in Raid 0
Work/Media – Samsung F1’s in Raid 1
PSU: CORSAIR CMPSU-1000HX 1000W ATX

MON: Gateway 24” LCD
Server: HP MediaSmart EX485 (4.25TB Total)

Water cooling Hardware:
Swiftech Apogee GTZ
Radiator: Feser 240 (push and pull via S-flex F’s)
Pump: Swiftech MCP655-B
Reservoir:
Tubing: Tygon 1/2" ID, 3/4" OD
Feser One - UV Black

Photography:
Camera: Nikon D300
Flash (if used): SB-900
Lenses: Tamron 17-50 f/2.8 (Pro glass), Nikon 50mm F1.8

---------------------------------------------------------------------------------
So I gutted my TJ-10 for a few reasons:
-I’m impulsive
-Dust started clogging the PSU -> Caused the system to freeze
-Ungodly amounts of dust were being sucked in through the top (and I hate cleaning with a passion)

On a lighter note the temps were actually very solid (mid 30’s at stock).

Presently, I’m stuck in a small dorm room in San Francisco and all my tools are back in Minnesota so modding might be limited.

Parts on order:
EK-BAY SPIN Reservoir - Acetal
Various Bitspower fittings

Current thoughts:
I’m hoping to replace my GPU since I had a revelation that it was pointless since I don’t play PC games. lol
I hope the room I’m in can support the new power supply.
I haven’t seen anyone with EK’s new reservoir so it should be interesting.
I’m hoping to mount the D5 directly to the Reservoir but there might not be enough clearance.
I forgot all my sleeving supplies back with my CNC so I’ll have to order some more. (Maybe something from MurderMod)
03-23-2009, 07:01 AM
b@llz0r

sweet... been looking forward to a raven build

subd :up:
03-23-2009, 12:47 PM
ben549

A few quick pictures…….

http://farm4.static.flickr.com/3594/...17bd1591_b.jpg

http://farm4.static.flickr.com/3457/...b66bcdb8_b.jpg

I mounted an ESA controller to the Antec Mult-Station Elite in the top drive bay which has resulted in a lot of wiring…..

http://farm4.static.flickr.com/3609/...2e0327f5_b.jpg

My current work area…….So small :(
03-23-2009, 01:54 PM
Devil_Dog

Quote:

Originally Posted by b@llz0r

sweet... been looking forward to a raven build

subd :up:

Ditto:up:
03-23-2009, 02:04 PM
Papa.Smurf

looks like its gonna be a great build!

Sub'd
03-23-2009, 02:16 PM
HuffPCair

Very cool love this case and here is the thread I started a while ago with some builds on it from some chaps on here.

http://www.xtremesystems.org/forums/...d.php?t=216373
03-23-2009, 03:18 PM
elite.ire

woo, raven build :), sub'd
03-23-2009, 04:01 PM
theseeker

Nice pics!
03-23-2009, 04:15 PM
jollyjoker

looks good cant wait to see more
03-23-2009, 04:42 PM
shazza

Yep - looks good. I like the Raven, and it will be fun to see what you do with it.
03-23-2009, 05:15 PM
ILikeCosmosS

Raven is hard to watercool i want to see how this is done maybe might spark me some idea's for cosmos s build :)
03-23-2009, 06:24 PM
ben549

I’m not sure where I should put a fill port…….any ideas? I’ve marked a few spots such as: next to the pci slots on top, on the side of the 5.25” bays, or on the plastic pointing towards the back of the case.

Quote:

Originally Posted by HuffPCair

Very cool love this case and here is the thread I started a while ago with some builds on it from some chaps on here.

http://www.xtremesystems.org/forums/...d.php?t=216373

Very cool, I missed that thread when I was doing research on the raven. There are a few mods in that thread that I’ve done as well.

Quote:

Originally Posted by ILikeCosmosS

Raven is hard to watercool i want to see how this is done maybe might spark me some idea's for cosmos s build :)

Why is it difficult to watercool?
03-23-2009, 06:25 PM
HuffPCair

Can't wait to see how it comes out. Great looking pictures so far though.
03-23-2009, 07:05 PM
NameTaken45

ive been dying to see a raven build. good work so far. sub'd.
03-23-2009, 07:21 PM
Jhors2

I love it! One question what are those covers for the extra PCI and PCI-E slots??
03-23-2009, 07:37 PM
Papa.Smurf

Were do you plan on putting the rad btw?
03-23-2009, 08:23 PM
Mr_Mike

looks good cant wait to see more
03-24-2009, 12:28 AM
skane

Quote:

Originally Posted by Papa.Smurf

Were do you plan on putting the rad btw?

I was wondering about this as well.
03-24-2009, 01:32 AM
bianco

nice project ben549.
i remember your previous build, full of nice ideas and was on a challenging case as well...
watching your log for more good stuff!
:up:
03-24-2009, 02:47 AM
ben549

Updates:
Security loop installed to prevent theft
PCI-E power cables have been routed behind the motherboard tray (tray had to be trimmed)
I had a revelation about how to manage cables behind the mobo tray…..Pictures will explain everything.

Pictures coming soon (Roommate is sleeping)

Quote:

Originally Posted by Jhors2

I love it! One question what are those covers for the extra PCI and PCI-E slots??

They are covers I use when I water cool to prevent any leaks from damaging the empty slots. They also work great as dust covers. I also have them covering the empty memory slots. I believe the brand I’m currently using is LampTron.

Quote:

Originally Posted by Papa.Smurf

Were do you plan on putting the rad btw?

There are actually brackets that come with the case for mounting radiators to the back of the case. They are designed for triple radiators so I had to mod them…..

Quote:

Originally Posted by bianco

nice project ben549.
i remember your previous build, full of nice ideas and was on a challenging case as well...
watching your log for more good stuff!
:up:

Thanks!!!! Don’t worry I’ve got plenty of tricks up my sleeve for this build.
03-24-2009, 04:19 AM
BlueAqua

I've been wondering about the Raven and I'm glad to see you back Ben. If you need somebody to use your tools here in MN, just let me know. :up:

Where are you going to install the rad?
03-25-2009, 01:05 AM
ben549

Finally some more picture updates!!!

http://farm4.static.flickr.com/3548/...0d248866_b.jpg

Just a taste of what I have planned for cable management. What makes this setup unique is that the clips are screwed in, instead of being stuck on!

http://farm4.static.flickr.com/3600/...c1705ccf_b.jpg

Fittings as they exit the case….

http://farm4.static.flickr.com/3547/...9af99961_b.jpg

Fillport location

http://farm4.static.flickr.com/3585/...bbf9e2aa_b.jpg

Radiator test mount to demonstrate how it can be done. Please also notice the security loop above the power supply.

http://farm4.static.flickr.com/3464/...bd7407a3_b.jpg

PCI-E cables routed through trimmed motherboard holes.

http://farm4.static.flickr.com/3609/...a73a81c6_b.jpg

HDD Hot swap Cable and power cable for Antec Mult-Station Elite
I’m torn with regards to the hot-swappable cables. I love the idea of being able to swap out HDD’s but I don’t want my HDD’s connected via Molex connectors.
As for the Antec cable, i might use one of the sleeveing kits from MurderMod to make it a bit more presentable.

http://farm4.static.flickr.com/3448/...4d9c0ecb_b.jpg

My order from Sidewindercomputers.com…… That was fast!!! I’ve just got to say….I love this new reservoir, it’s so choice.

http://farm4.static.flickr.com/3541/...4e34ecb8_b.jpg

EK Spin Reservoir – Front Left

http://farm4.static.flickr.com/3464/...0643a06b_b.jpg

EK Spin Reservoir – Front Right

http://farm4.static.flickr.com/3464/...d6e0ec60_b.jpg

EK Spin Reservoir – Rear Right

http://farm4.static.flickr.com/3631/...0c3a8977_b.jpg

EK Spin Reservoir – Rear Left

Quote:

Originally Posted by BlueAqua

I've been wondering about the Raven and I'm glad to see you back Ben. If you need somebody to use your tools here in MN, just let me know. :up:

Where are you going to install the rad?

In truth I never really left; I will always rely on XS for news, information, and inspiration.

Lol the CNC isn’t even running yet; just the drill press, vacuum press/clamping system, and computer control center are fully operational.
03-25-2009, 01:33 AM
dro

s-u-b-s-c-r-i-b-e-d-d- =D
03-25-2009, 01:57 AM
HESmelaugh

Nice log so far! :)

Looking forward to more.
03-25-2009, 01:57 AM
MomijiTMO

Nice photos! Keep on going.
03-25-2009, 02:09 AM
dingdong555

Just went through your old worklog and now I know what to expect.....pure awesomeness :D

Keep it up, the pictures really make me want to get the case and mod it for a secondary computer.
03-25-2009, 04:59 PM
cstkl1

tried that routing the pcie cable that way before..
couldnt reach the card..
also curious since u have two free blue 12v connectors on the psu..
isnt it cleaner and nicer to use the moudalr black cables that comes with the hx1000??? for the gc pcie and cpu 8 pin
03-25-2009, 05:39 PM
ben549

Quote:

Originally Posted by dingdong555

Just went through your old worklog and now I know what to expect.....pure awesomeness :D

Keep it up, the pictures really make me want to get the case and mod it for a secondary computer.

And I plan to deliver!!! HA HA

Quote:

Originally Posted by cstkl1

tried that routing the pcie cable that way before..
couldnt reach the card..
also curious since u have two free blue 12v connectors on the psu..
isnt it cleaner and nicer to use the moudalr black cables that comes with the hx1000??? for the gc pcie and cpu 8 pin

I’m not sure how you routed them but for my setup they should be long enough. There’s always extension cables lol.

Ultimately I want to minimize the number of cables in the case. At some point I plan to single sleeve the PSU cables so that should make them more presentable.
03-25-2009, 06:10 PM
evil-98

ben549, nice to see you back. hows the CNC??
raven is an interesting choose should be good.
03-26-2009, 02:11 AM
ben549

Quote:

Originally Posted by evil-98

ben549, nice to see you back. hows the CNC??
raven is an interesting choose should be good.

Its great to be building again! I live for this stuff!

The CNC is coming along nicely; I have to get the parts I designed cut via water jet. Very expensive ($800) so I’m still getting some quotes. I also acquired a new drill press and built a vacuum press/clamping system(Capable of over 21 atmospheres :o).

Current setup:

http://farm4.static.flickr.com/3121/...a58a10da_b.jpg

I’m moving to a larger space when I get back to Minnesota.

More pictures here:
http://www.flickr.com/photos/2734171...7608992895158/
03-26-2009, 02:56 AM
ben549

Impulsive moment…….

Just ordered:
murderMod MDPC-X Psychopack
Pin Extractor: Deluxe (+ 24.39 USD)
Accent Sleeving: +10ft of 1/4 inch Red (+ 4.88 USD)

I’m still debating whether or not the red spinner for the EK reservoir is really needed. (I’m sure I’ll get it eventually lol)
04-20-2009, 06:08 PM
Mr.Guvernment

man this build is looking sexy! i want my own cnc machine :D
04-21-2009, 05:54 PM
lkiller123

It is such an unique case. Nice to see you working on it! Looking foward to it:D
04-21-2009, 05:58 PM
breathemetal

Im starting to like this case.
Hmm...
04-23-2009, 04:35 PM
lkiller123

I love the way you modded the Dominator Airflow fan:D How'd you do it?
04-23-2009, 05:07 PM
ILikeCosmosS

ben start the dam ek waterfall res and take a video of it as a sneak peak to what comes next
i am dying to see the waterfall res in action
04-23-2009, 11:11 PM
ben549

I don’t know what’s going on with XS with regards to my previous posts… I don’t have a clue what I typed before; so if anyone received email updates of my posts please email me a copy of them and I will re post them.

Here are the pictures that were lost in the downtime.
Full sizes available here: http://www.flickr.com/photos/2734171...7615770135803/

http://farm4.static.flickr.com/3554/...8189db5b_b.jpg

http://farm4.static.flickr.com/3572/...46e8f925_b.jpg

http://farm4.static.flickr.com/3367/...34159e54_b.jpg

http://farm4.static.flickr.com/3299/...df831cac_b.jpg

http://farm4.static.flickr.com/3408/...e6b46b4a_b.jpg

http://farm4.static.flickr.com/3307/...7b3ccaed_b.jpg

http://farm4.static.flickr.com/3561/...af834a74_b.jpg

http://farm4.static.flickr.com/3323/...8f3d0ed5_b.jpg

http://farm4.static.flickr.com/3353/...0e0f610c_b.jpg

http://farm4.static.flickr.com/3392/...679128e0_b.jpg
04-24-2009, 01:25 AM
ben549

Update:

UPDATE:
The radiator mounting, as simple as it is, has been stressing me out. It’s too close when the ports are facing the case and too sharp of an angle when they’re facing away. I guess given the radiator (TFC 240) and the fans (s-flex) what kind of performance differences will I see between these setups?

<-| | < - Case
<-| | < - Case

| | < - Case
| | < - Case

<-| | Case
<-| | Case

| |<- < - Case
| |<- < - Case

<- <-| | Case
<- <-| | Case

Orders:
Performance-PCs - Delivered
MurderMods – Delivered
MNPC Tech – Delivered
Various cable sleeving stores – ship date delayed…..ug
Silverstone – Still consulting (more Drive trays, and more)
Petras Tech Shop – Delivered (I’m close enough that shipping is next day)
Newegg - Delivered

http://farm4.static.flickr.com/3478/...07065232_b.jpg

Performance-PCs Shipment:
murderMods order:

AAHHHHH!!! The EK BAY RESERVOIR spinners I ordered are the WRONG COLORS!!! I guess I’ll just have to stick with the white spinner. I’ve been toying with a few designs which incorporate them in a custom flow meter….

It looks like the D5 Mod kit might have some aesthetic defects. Hopefully they can be cleaned off easily. I wasn’t expecting the kit to make the D5 this big!! Ultimately it looks better so I plan to stick with it.

In truth, I’m not entirely sure what I had intended for the custom bios reset switch……don’t worry I’ve got some ideas I’m still playing around with so I’m not going to spoil the surprise just yet. Ha ha

I received my murdermods order and it’s topnotch as always! I’m suffering because I’m stuck sitting here with 200ft of custom sleeving and I have yet to receive my hot knife!!!!
-Update: I started using it…..ghetto style and I’ve already burned through 80ft
04-24-2009, 03:30 AM
ben549

Newegg Shipment

Silverstone has let me down……..
Their SST-CP05 cables are rubbish…..By this I mean they are total :banana::banana::banana::banana:. Not only are they poor quality but they are riddled with defects and pose an electrical hazard. Let me be very clear, the right angled adapter that is included with the case appears to be acceptable quality. I contacted Silverstone about ordering more of the right angled versions but was told they were unavailable. I’m just so infuriated; I mean what the hell am I going to do now? I will have hot swappable bays; it’s just going to take more work than I had expected.

http://farm4.static.flickr.com/3602/...ae38f8cb_b.jpg
04-24-2009, 03:36 AM
ben549

MNPCTECH Shipment
*Note* the red and silver vinyl was included as samples

http://farm4.static.flickr.com/3647/...d0f0aefd_b.jpg

http://farm4.static.flickr.com/3554/...b706bcfa_b.jpg

The matte black is to cover the logos on the back of the 120mm fans.
http://farm4.static.flickr.com/3519/...bdb8c037_b.jpg

I plan to use the gloss black to cover the DVD Drive

So I finally find the radiator grill that I’ve been looking for and what happens? It doesn’t fit. FML
04-24-2009, 03:42 AM
ben549

Petras Tech Shop Shipment

http://farm4.static.flickr.com/3529/...b72995f2_b.jpg

Most of this order is for other modding projects but I just had to order some silver coils!
04-24-2009, 03:48 AM
ben549

Various cable sleeving shipments

No longer will I be forced to use a scissors to cut and the side of a soldering iron to melt the edges of my sleeving.

http://farm4.static.flickr.com/3506/...251655db_b.jpg

I don’t think I ordered enough. This isn’t even the entire shipment………

http://farm4.static.flickr.com/3637/...f9f4bb63_b.jpg
04-24-2009, 04:01 AM
ben549

Quote:

Originally Posted by lkiller123

I love the way you modded the Dominator Airflow fan:D How'd you do it?

I stripped the logos off and replaced the fans. Incase you were wondering, they're 40mm fans and you can wire them the same way as the stock fans.
04-24-2009, 04:13 AM
arkadur

very nice parts you got there!
not enough? i can agree with you.. it's never enough ...
04-24-2009, 04:38 AM
oggie

Gonna love this one, keep it coming
04-25-2009, 08:00 AM
norim_13

You're going very well!
That's a great case!

Waiting by the end :)
04-29-2009, 11:50 AM
ben549

No one has any comments about my previous questions? Seriously?

I’ve been busy finalizing the order to get the parts for my custom cnc cut via waterjet so they will be ready when I return to MN.

I’ve also been working on a side project that unfortunately may not be a feasible as originally planned.
Awhile back I was amazed and inspired by the Optimus Tactus but totally put off by the price; so I started my own concept. Like all my concepts, I feel I must build it, here comes the fun. I’ve been searching for a supplier for a couple of 7” or larger touch screens. They must be relatively inexpensive, slim, and possess multi touch capabilities. I have been looking at a few on ebay that come with an arm9 development board. Unfortunately multi touch capable touch screen are relatively new and very expensive….

As for my current build:

Waiting on parts AGAIN….

I want to drill out all of the rivets (I believe a 1/8 drill bit is what is commonly used) and replace them with black screws….Can anyone tell me what size screws I need or recommend any places that stock them?
04-29-2009, 12:18 PM
sniperbob

clean looking build so far! keep up the good work on this different style case!
04-29-2009, 02:01 PM
MomijiTMO

Yo, I cannot answer the dominator fan question since I don't have one. With the rivet question, M3 bolt and nut worked for me. You could tap the hole but I like nuts.
04-30-2009, 05:08 PM
ben549

Update

Just as I was leaving for class, another package arrived. Even though I was running late, I decided to just bring it with. Inside was the two San Ace Fans I ordered. Unfortunately one of them had a broken fin and support bracket………..so after some X-ACTO work it’s now a shroud. Ha ha

I’m debating whether or not to replace the 4 S-Flex fans for two Sanyo Denki San Ace fans.

I’m debating which fan I should use for the case exhaust.

Here are a few stills from my reservoir testing. This test setup was also used to observe the effects of having a 90 fitting connected to the pump intake.

http://farm4.static.flickr.com/3584/...aac47152_b.jpg

http://farm4.static.flickr.com/3323/...3291e45f_b.jpg

http://farm4.static.flickr.com/3215/...45ab4a4a_b.jpg

http://farm4.static.flickr.com/3352/...7bdd335f_b.jpg

http://farm4.static.flickr.com/3391/...956ebc70_b.jpg

I also shot a brief video demonstrating the effects of varied flow rates. Because this is XS I even shot the footage in HD!!! Unfortunately my HD camera uses a proprietary file format and I don’t have the software to convert the files. Hopefully this will just be a minor delay.
04-30-2009, 05:12 PM
ILikeCosmosS

ben i didnt expect it to be what i thought of the waterfall

if the waterfall was set back a little bit more in the res it would let the water have a chance to curve
04-30-2009, 11:04 PM
Oli4v

I like it :)

it's looking very clean allready ;)
05-04-2009, 05:25 PM
ben549

Good News!

The video demonstrating the EK-BAY SPIN Reservoir Flow Rate Effects is now online!
http://www.youtube.com/watch?v=kaz5k1IF82s

Please keep in mind that pump is connected directly to the reservoir and in most cooling loops there will be lower flow rates.

One concern I have with the liquid being directed at the front of the reservoir is that people may notice erosion over time when using liquids with small particles (such as Primochill or Feser).

Quote:

Originally Posted by ILikeCosmosS

ben i didnt expect it to be what i thought of the waterfall

if the waterfall was set back a little bit more in the res it would let the water have a chance to curve

That would be a relatively simple mod ;)

Quote:

Originally Posted by Oli4v

I like it :)

it's looking very clean allready ;)

Lol well I still have a ways to go, don’t worry.
05-05-2009, 03:13 AM
LucasR

nice twister ;D
05-06-2009, 02:33 AM
ben549

For some reason I seem to collect fans……It’s not intentional, they just build up lol.
http://farm4.static.flickr.com/3308/...249d3f97_b.jpg

I will be using the Noise Blocker fan as the rear exhaust fan
http://farm4.static.flickr.com/3387/...9a776904_b.jpg

DVD drive and Testing Bench

Since I have nowhere to paint I decided to try a vinyl adhesive….. Seeing how it was my first time working with vinyl adhesive I’m quite pleased with the results.

http://farm4.static.flickr.com/3640/...ff37fbbe_b.jpg

http://farm4.static.flickr.com/3662/...1a0a9140_b.jpg
05-10-2009, 12:02 AM
ben549

Update!

Blacked out the PSU
DVD drive mounted
Pump and Reservoir mounted (with custom Antivibration pads)
ATX Cable mounted to fan
Fill Port attached with D-plug to facilitate easy top panel removal
White LED’s mounted and painted

Epic Shot
http://farm4.static.flickr.com/3261/...04a51b5c_b.jpg

Case Exhaust
http://farm4.static.flickr.com/3356/...94f55e97_b.jpg

Updated Fill Port (with Dplug)
http://farm4.static.flickr.com/3384/...1e07c176_b.jpg

ATX Cable Management
http://farm4.static.flickr.com/3323/...2da02823_b.jpg

Case Interior - Low Angle
http://farm4.static.flickr.com/3350/...bd1bd54e_b.jpg

Cable Management System - Low Angle
http://farm4.static.flickr.com/3342/...475b10f1_b.jpg

Pump Mount
http://farm4.static.flickr.com/3566/...c9ce53e9_b.jpg

Pump Mount - Top View
http://farm4.static.flickr.com/3595/...9bb06418_b.jpg

Full res here: http://www.flickr.com/photos/2734171...7615770135803/
05-10-2009, 12:44 AM
hmmisee

Yay your alive!! n__n
This looks beautiful. I was thinking of buying a Raven. All black interior, good cable management as you have shown, whats not too like.
Whats the cooling like in this beast?
Cant wait for pictures of the hardware :yepp:

Great job!
05-10-2009, 01:33 AM
dingdong555

w00t!

Keep em' coming.

Really nice work so far Ben :up:
05-10-2009, 01:55 AM
MomijiTMO

Ummmmmmmmmmmmmmm

:up:
05-10-2009, 02:20 AM
Ming@s

Great Work.

:up:

Keep Going
05-10-2009, 03:04 AM
Dangals

WOW :shocked: :shocked: :shocked:

That looks really nice ...... wait that doesn't quite do it justice - that looks :banana::banana::banana::banana:n awesome!!

More pics please :D
05-10-2009, 03:09 AM
ben549

In case anyone was wondering, the stickers/logos on the PSU have not been removed.

Quote:

Originally Posted by hmmisee

Yay your alive!! n__n
This looks beautiful. I was thinking of buying a Raven. All black interior, good cable management as you have shown, whats not too like.
Whats the cooling like in this beast?
Cant wait for pictures of the hardware :yepp:

Great job!

OMG I WAS DEAD?? To be honest, im not a fan of the hotswappable HDD setup at this time. The cooling is very good. Unfortunately there aren’t many choices if you want to replace the 180mm fans.

Quote:

Originally Posted by dingdong555

w00t!

Keep em' coming.

Really nice work so far Ben :up:

Thanks!

Quote:

Originally Posted by MomijiTMO

Ummmmmmmmmmmmmmm

:up:

Yes?

Quote:

Originally Posted by Ming@s

Great Work.

:up:

Keep Going

Will do!
05-10-2009, 03:17 AM
ben549

Quote:

Originally Posted by Dangals

WOW :shocked: :shocked: :shocked:

That looks really nice ...... wait that doesn't quite do it justice - that looks :banana::banana::banana::banana:n awesome!!

More pics please :D

Thanks!

I have to finish the VFD display then I will get some pictures of it and the LEDS that will illuminate the 5.25” bays.
05-10-2009, 01:13 PM
LucasR

looks pretty good :) keep going Ben
05-13-2009, 10:49 PM
ben549

Last Thursday/Friday night (I don’t sleep Tuesday or Thursdays) I had something of a revelation. I realized how often I change hardware not to mention cases. To simplify this process in the future I’ve decided to build a radiator enclosure. Depending on the size and complexity of the enclosure I might start yet another build log.

Unfortunately I have already shipped my computer but the good news is I have more parts coming!!
Aqua Computer Ball valve internal thread G 1/4 without fittings
Bitspower Anti-Vibration Rubber Bolts M4 - 4pcs/Set
Custom Cut Length 1/2 Expandable Sleeving
Custom Cut Length 3/8 Expandable Sleeving
Custom Cut Length 1/4 Expandable Sleeving
Custom Cut Length 1/8 Expandable Sleeving
UN Designs Z-Bracket for 3G or Absolute Pump Brackets
Tygon R3400 1/2in. ID 3/4in. OD Laboratory
Bitspower Silver Shining Rotary 90-Degree G1/4 Adapter
Feser TFC Xchanger - Monsta Extreme Radiator 420/360
Bitspower Black Freezer EIX58NSC for EVGA X58 Classified
Bitspower Black Freezer MOS EI58DP II POM Version - for EVGA Classified
05-14-2009, 03:49 PM
MomijiTMO

Yes it's a great thing to do, especially if you upgrade/move cases yearly.

I really like mcoffey's rad enclosure.
05-14-2009, 06:33 PM
dro

you have done justice to the case ben549
i love the outcome of this build
05-15-2009, 12:34 PM
WatZp

Looks awesome, Ben.
05-15-2009, 02:29 PM
Chris1985

incredible build!
can't wait to see more

very nice :up:
05-21-2009, 02:14 AM
ben549

Unfortunately, none of my stuff (including my case) has arrived from SF!!

I went ahead and ordered some new hardware for this build:
EVGA E760 CLASSIFIED 1366 Intel X58 EATX Intel Motherboard
2x CORSAIR Dominator GT 6GB (3 x 2GB) DDR3 2000 (PC3 16000) Triple Channel Kit Desktop Memory
Creative Sound Blaster X-Fi Titanium Fatal1ty Professional 7.1 Channels PCI Express Interface Sound Card
05-21-2009, 04:05 AM
D0BR0

Excellent build in this Raven!! ;)
05-21-2009, 07:38 AM
dreamaxx

Wow some crazy awesome hardware going in! :)
05-22-2009, 12:50 AM
ben549

Hardware Updates!!!

http://www.flickr.com/photos/2734171...7615770135803/

http://farm4.static.flickr.com/3557/...2e9b8187_b.jpg

http://farm3.static.flickr.com/2425/...2127c175_b.jpg

http://farm3.static.flickr.com/2456/...d5b767e2_b.jpg

http://farm3.static.flickr.com/2428/...d957e2f8_b.jpg

http://farm3.static.flickr.com/2469/...97141c11_b.jpg

http://farm4.static.flickr.com/3596/...aab0e25c_b.jpg

http://farm4.static.flickr.com/3588/...d4eb2151_b.jpg

http://farm4.static.flickr.com/3302/...ae68fe60_b.jpg
05-22-2009, 01:31 AM
jpm804

:shocked: Nice hardware... what CPU you matching up that Classified and Domninator GT's... thing is gonna fly
05-22-2009, 01:43 AM
Dangals

:slobber: me wants

Those dominators and the classified alone are almost as much as I spent on my entire build last time (in Aus $ that would be around $1800-$2000 - bloody exchange rate :shakes:)
06-01-2009, 03:58 AM
hmmisee

Any more updates/
I just love this build :D
06-06-2009, 04:00 AM
ben549

Well the case finally arrived…….Buuuuuut……..a small black cog broke off from the front door assembly. I may end up giving this case to my younger brother seeing as he needs a new case and I’ve been interested in the RAVEN 2. For those unaware, the Raven 2 allows for a radiator to be placed in the bottom of the case.

Well I was planning to run an I7 920 D0 but since they are getting replaced its kind of up in the air at this point…….

Quote:

Originally Posted by jpm804

:shocked: Nice hardware... what CPU you matching up that Classified and Domninator GT's... thing is gonna fly
06-07-2009, 02:37 AM
hmmisee

Ah yes the raven 2, It looks great, but a little cramped :down:
http://www.techpowerup.com/img/09-06-01/raven2_6.jpg

Maybe Get the Raven back, quickly finish it, Maybe try to get it into MDPC if you do an unbelievable job? :yepp:

:)
07-23-2009, 08:58 PM
menace2society

Is this project cancelled. :shrug:
07-23-2009, 09:12 PM
metachronos

Yeah I wanna see some updates on this one.
08-03-2009, 03:53 PM
MaxHardware

Quote:

Originally Posted by menace2society

Is this project cancelled. :shrug:

x2 :shrug:
08-07-2009, 06:30 AM
Bill Owen

Quote:

Originally Posted by ben549

MNPCTECH Shipment
*Note* the red and silver vinyl was included as samples

http://farm4.static.flickr.com/3647/...d0f0aefd_b.jpg

Glad you liked the samples. Let me know in advance before you place your next order, drop by Mnpctech's studio and pick it up :up:
08-07-2009, 02:46 PM
[DGK]

Like the Project so much,dunno what happened, but im still looking forward for an update.
08-15-2009, 12:02 PM
Wezly

This is the first thing that came up when I saw this case in the warehouse at the Micro Center I work at. This thread convinced me to get one; it's an incredible case and it's a shame to see no new updates after so long :[

Does anyone know if there's a thread for his CNC machine? I forget...
09-15-2009, 02:15 AM
kilowatt

any update?

All times are GMT -8. The time now is 07:15 AM.

XtremeSystems