-
Asus/NCIX Competiton Entry - 2Chesapeakes
-
I look forward to your DICE runs. Nice speed on the memory there as well. :up:
-
-
Looks like fun. Hurry up and post them dice results up.
-
Ooooh! Good runs :up:
Can't wait to see what you can do with a lump of solid CO2. I'll bring my finaces lappy on the road so I can keep updated while at work ;)
-
loosen up the timings, 10-11-11-31 should be able to get about 1125 out of decent HCF0.
-
Nice run, keep pushing.:)
Peace, Chuck
-
Congratz Very nice memory clocks!
Its good to see some new competition!
-
Lookin good buddy boy, keep pumpin her full of.......err........voltage?:clap:
subscribed!
-
Quote:
Originally Posted by
Gunslinger
I look forward to your DICE runs. Nice speed on the memory there as well. :up:
It should be fun to get the CPU under some cold.
Quote:
Originally Posted by
drnip
Looking great so far!
Thanks
Quote:
Originally Posted by
chuchnit
Looks like fun. Hurry up and post them dice results up.
For me it is fun until the wife thinks I'm spending too much time in the basement.
Quote:
Originally Posted by
komadyret
Ooooh! Good runs :up:
Can't wait to see what you can do with a lump of solid CO2. I'll bring my finaces lappy on the road so I can keep updated while at work ;)
I'm hoping for a 5Ghz + OC on the CPU with Dice.
Quote:
Originally Posted by
Slovnaft
loosen up the timings, 10-11-11-31 should be able to get about 1125 out of decent HCF0.
SHHHHH now you've gone and told everyone. I will give that a try this weekend. Thank You
Quote:
Originally Posted by
clwoodwork
Nice run, keep pushing.:)
Peace, Chuck
I will push it to the edge and then over if it won't cooperate
Quote:
Originally Posted by
V2-V3
Congratz Very nice memory clocks!
Its good to see some new competition!
Thank You you also have some very impressive numbers.
Quote:
Originally Posted by
HawaiianSupermn
Lookin good buddy boy, keep pumpin her full of.......err........voltage?:clap:
subscribed!
AHH being a licensed electrician I am a firm believer in providing more than enough voltage.
-
Quote:
Originally Posted by
2chesapeakes
For me it is fun until the wife thinks I'm spending too much time in the basement.
:rofl: Now I don't feel like the only one :ROTF:
-
-
Keep it up Peaks, you can pull out some pretty amazing oc's when you put your mind to it. Can't wait to see what you do next. :up:
-
I'm all rigged up to keep up to date on this while at work. Now, start giving us updates :)
-
Hello 5ghz, very nice work 2peakes, keep her rolllin bro.
-
Thanks guys my DICE vendor opens in 2 hours then the fun begins
-
Great!
Please do frequent updates. We might be able to help nurse the rig to higher clocks if we know what is going on :)
If you're able to put up an effort like in early march, this will go a long way!
-
updates? It's been 12 hrs....
-
Need updates.
Peace, Chuck
-
Maybe he's done for.... CO2 poisoning? Did anyone tell him to use a well ventilated room? That basement-cave of his might not be the best suited site for D-icing? :eek:
Or he's probably just too busy having fun with the stuff to care about us :ROTF:
-
Sorry guys I habe been battling BIOS corruption and OS corruption. Here is what I have accomplished so far. I will be working on the CPU OC today. All my saved profiles were wiped out of the BIOS and it revereted back to the original it was shipped with.
http://i521.photobucket.com/albums/w...res/th_219.jpg
http://i521.photobucket.com/albums/w...es/th_1140.jpg
-
Ouch! That we know all too much about.
Well, as long the hardware is still performing, it's just a small setback. How did the dice work out? Good fun?;)
-
I will be posting updates tonight unfortunately I had to spend most of the day Sunday in the ER with my son. Fortunatly it was nothing serious so I will post what I was able to accomplish this week end.
-
Original post updated w/ results of this weekends DICE results
-
5.158ghz!!! Keep it coming man!!!
-
nice to see you aren't killing anymore qx9650s, great results.
-
Looking good bro, she got more left in her?
-
Quote:
Originally Posted by
lesstutrey
nice to see you aren't killing anymore qx9650s, great results.
Yeah three dead QX9650's was not a good start to my OCing Hobby. I since learned that stability does not always come from more Vcore
Thank You
-
Quote:
Originally Posted by
HawaiianSupermn
Looking good bro, she got more left in her?
I pretty sure if I could get my hands on some LN2 I could get more from the board / CPU. The temps on these processors are crazy. If I have a chance Saturday I will be picking up more DICE and see if Ican get a little more from it.
-
EXCELLENT clocks!
I actually found that LN2 was a LOT harder to work with than DICE, especially with this board and its pwm's relatively horrible transient load balancing. a better buck would produce better LN2 results, but for my chip on R2E LN2 brought down the voltage threshold.
For clocking LN2 is relatively useless, if not acually a bit annoying to deal with in this combo. IMO the only place it's helpful is in Vantage; that's some CRAZY swing.
-
2peakes that's one sick i7 you got there buddy. Keep pushing.:up:
-
Dude, that is a sick clock on your chip....keep pushin it!!
-
Very good d-ice results. Looks like that chip will be your friend ;) (and you desreve it after killing all those qx cpus, but one learns as one goes :) )
Given time to tinker, you might get it stable and good for a few screenies at even higher speeds. D-ice seems to be doing really well with the core i7s.
Sorry to hear about your son, and endlessly happy he's ok.
-
BTW, what happened that he had to go to the ER?
-
Great Job 2peakes, keep on rocking :up:
-
Quote:
Originally Posted by
2chesapeakes
I pretty sure if I could get my hands on some LN2 I could get more from the board / CPU. The temps on these processors are crazy. If I have a chance Saturday I will be picking up more DICE and see if Ican get a little more from it.
Do you have a dewar? Both PraxAir and AirGas have dewar rental programs for 80L and bigger dewars where they deliver right to your door. LN2 is less costly this way also. Before I was paying $85 to fill my 60L dewar now I pay $125 for 240L!!:up:
-
Quote:
Originally Posted by
Slovnaft
EXCELLENT clocks!
I actually found that LN2 was a LOT harder to work with than DICE, especially with this board and its pwm's relatively horrible transient load balancing. a better buck would produce better LN2 results, but for my chip on R2E LN2 brought down the voltage threshold.
For clocking LN2 is relatively useless, if not acually a bit annoying to deal with in this combo. IMO the only place it's helpful is in Vantage; that's some CRAZY swing.
So it sound like I can save a little bit of money and wait for the 975 to be released instead of buying a Dewar. I have also had the board shut down on cold bug when I was using an F1E for dice. I let the CPU sit too long and it would shut down. When I tried to power back up I was only getting .5V on the CPU Vcore. I actually increased the Vcore to keep from cold bugging and not because the CPU needed it.
-
Quote:
Originally Posted by
chuchnit
2peakes that's one sick i7 you got there buddy. Keep pushing.:up:
Hopefully I can get this upcoming weekend to push it harder but I have my nephews Bday on Saturday so it may be a short benching day. The wife would not understand if I told her I had to bench and not attend the party.:mad:
-
Quote:
Originally Posted by
Philly_Boy
Dude, that is a sick clock on your chip....keep pushin it!!
I think she has more left in her however I have spent hours just to get 10Mhz more out of the Bclk.
-
Quote:
Originally Posted by
komadyret
Very good d-ice results. Looks like that chip will be your friend ;) (and you desreve it after killing all those qx cpus, but one learns as one goes :) )
Given time to tinker, you might get it stable and good for a few screenies at even higher speeds. D-ice seems to be doing really well with the core i7s.
Sorry to hear about your son, and endlessly happy he's ok.
I think I can get it stable if I can get the heat under control. I've seen a delta of almost 35C + from Dice pot temp to CPU temp and I am confident I had a very good mount on the pot.
-
Quote:
Originally Posted by
Philly_Boy
BTW, what happened that he had to go to the ER?
The doctor thought he had appendisitis and decided to have him brought to the ER for blood test and cat scan. Fortunatly it was a false alarm however we spent most of the day waiting for the news.
-
Quote:
Originally Posted by
Buckeye
Great Job 2peakes, keep on rocking :up:
Thanks Buckeye I have seen your results from your bench session and they are nothing less than impressive.
-
Quote:
Originally Posted by
Philly_Boy
Do you have a dewar? Both PraxAir and AirGas have dewar rental programs for 80L and bigger dewars where they deliver right to your door. LN2 is less costly this way also. Before I was paying $85 to fill my 60L dewar now I pay $125 for 240L!!:up:
In my area they are not allowed to deliver to residential areas. I have spoken with them and they have a 30l they loan out however they were unsure where it was or what customer had it. I plan on calling them again to see if they located the dewar. One of my biggest issues is the big temp swings with the dry ice. If I could hold a tighter temp range I think I could get even higher.
-
Quote:
Originally Posted by
2chesapeakes
In my area they are not allowed to deliver to residential areas. I have spoken with them and they have a 30l they loan out however they were unsure where it was or what customer had it. I plan on calling them again to see if they located the dewar. One of my biggest issues is the big temp swings with the dry ice. If I could hold a tighter temp range I think I could get even higher.
We should talk. I am thinking of selling my 60L pressurized dewar as my room is now 5 steps away from where the 240L dewar lives. Email me or pm me on 411.
-
nice runs... now get to it.... i know you can do better :shocked: :P
-
I'll bet he's sandbagging a few runs for when others post better results....:up:
-
Quote:
Originally Posted by
Philly_Boy
We should talk. I am thinking of selling my 60L pressurized dewar as my room is now 5 steps away from where the 240L dewar lives. Email me or pm me on 411.
what does a 60L go for?
@2Chesapeakes - Keep pushin it! I wish i could join you guys but i dont have the funds for an i7 setup atm.
-
Quote:
Originally Posted by
Philly_Boy
We should talk. I am thinking of selling my 60L pressurized dewar as my room is now 5 steps away from where the 240L dewar lives. Email me or pm me on 411.
I will hit you up over at 411. I just need to review some finance I have a (2) trips and taxes I have to prepare for and the wife won't let me out of the trips.
-
Quote:
Originally Posted by
punx223
nice runs... now get to it.... i know you can do better :shocked: :P
With motivation like this the wife will hate me this weekend. I will be hiding in the basement, then go to the Bday party, and then hide out in the basement again.
Come to think of it maybe sitting in a 40C basement is the reason I can not get rid of this cold.
-
Quote:
Originally Posted by
Mpetrosino
what does a 60L go for?
@2Chesapeakes - Keep pushin it! I wish i could join you guys but i dont have the funds for an i7 setup atm.
Thanks I will keep pushing. Are you from the NY area? One of the contractors on my project has the same first initial and last name.
-
Quote:
Originally Posted by
2chesapeakes
Thanks I will keep pushing. Are you from the NY area? One of the contractors on my project has the same first initial and last name.
Haha, its funny you say that. My family is originally from the east coast (Im in southern California), but ive never met any of them and as far as i know there isnt too many of us left. Sounds like were making a COMEBACK!!!!:rofl:
JK.
Keep up the good work! :up::up::up::up:
-
-
What is the cost per litre of LN2
-
Cheap. I used to pay about 1.50 a liter I now pay like .50 cents a liter.
-
Quote:
Originally Posted by
Cpt.Planet
Cheap. I used to pay about 1.50 a liter I now pay like .50 cents a liter.
That cost per liter is less than I pay per pound of dry ice. I usually get 50lbs of dry ice and with the 965XE this will last me around 14 hours benching.
How many liters would a typical 12 hour benching session use and how hard is it to keep from cold bugging the board?
-
Quote:
Originally Posted by
Philly_Boy
We should talk. I am thinking of selling my 60L pressurized dewar as my room is now 5 steps away from where the 240L dewar lives. Email me or pm me on 411.
I've got that same thermos :up:
If my cpumhz entry holds up, I will take that dewar off your hands.
LWD incl.?
-
