Flowrates V2

http://i24.photobucket.com/albums/c5...5/P1020165.jpg

the xspc top +microreservoir performed rather ok, but there is a better solution.
http://i24.photobucket.com/albums/c5...25/xspctop.jpg

the favorite(xspc reservoirtop), will stay another day when the new pumps come in
http://i24.photobucket.com/albums/c5...servoirtop.jpg

my new stantart setup(ekv2+microres) :D
http://i24.photobucket.com/albums/c5...ity25/ekv2.jpg


the bar units is in liter per minute...gpm is sorta misleading for me..

loop:

res==>pump==>pump2==>waterblock==>flowmeter==>rad= =>res
http://i24.photobucket.com/albums/c5...flowmaster.jpg


for the extreme...
http://i24.photobucket.com/albums/c5/hondacity25/3.jpg
http://i24.photobucket.com/albums/c5...pppplepump.jpg

single pump was around


* all three will be tested, then retested with the newer pumps
* silver coils + true silver barbs + acryllic top

look forward to the results, love the MCP355 and XSPC top.

thanks for the effort!

Would you kindly also try XSPC Res top connected in series with XSPC top ? Just curios about the double top hype. :)

I must say, I do rather like the look of a single MCRes on top of a standard DDC top. It looks nice. The asymmetry is appealing.

What sucks about the restop and the MCres is that they are difficult to clean internally.

Quote:

---

Originally Posted by CedricFP

I must say, I do rather like the look of a single MCRes on top of a standard DDC top. It looks nice. The asymmetry is appealing.

What sucks about the restop and the MCres is that they are difficult to clean internally.

---

MCres, pipecleaner is your friend

i hope my XSPC Restop + MCP355 wins =)

then again, i'm just happy as long as it doesn't perform horribly

results are in.

thermal tests: started

Which results are which? :confused:

(granted, they're all close enough that the performance difference is tiny)

I can see the different flow rate indicators, but can't quite follow which is which. Any more clues?

it is indeed tiny...hahahah

sorry i was having fun...added the necessary info on post #1

how did you connect the XSPC top and the micro res together?

I used a koolance (male to male) and and extender(male to female)

Links? :)

http://www.koolance.com/water-coolin...product_id=632
http://www.koolance.com/water-coolin...product_id=633

:)

Quote:

---

Originally Posted by Sparda

Would you kindly also try XSPC Res top connected in series with XSPC top ? Just curios about the double top hype. :)

---

sorry won't do that...

i already boxed the xspc tops:D

dual ekv2 and tripple ekv2 coming up

I like the MCrestop on regular top idea.

Finally a reservoir top that bleeds like a reservoir should..

Quote:

---

Originally Posted by Martinm210

I like the MCrestop on regular top idea.

Finally a reservoir top that bleeds like a reservoir should..

---

yeah it bleeds so fast...i'm already done..1hr worth of testing :D

now editing pics for...
1. dual and tripple pump flows
2. waterblocks with dual pumps

Honda, withe the male female extender from koolance can a BP comp fitting work on the bottom of the mcres v2? I couldn't use one because the hole is recessed.....

Quote:

---

Originally Posted by BringerOdeath

Honda, withe the male female extender from koolance can a BP comp fitting work on the bottom of the mcres v2? I couldn't use one because the hole is recessed.....

---

i'm not sure you have all my compression fittings :D

i laugh at my at setup...:rofl:

results are in... :D

Quote:

---

Originally Posted by mcoffey

Nice mounting,

Been done long ago, in a land far away:D This was mounted with a male to male g 1/4, but BP D-Plugs work much better. I like using a EK res now myself. Much more volume, and much easier to work with when filling the loop. The new V2 Micro Res is much easier to work with than the older Micro res I used with the side ports.

http://lh5.ggpht.com/_BTn9YHMni9Y/R2...0/DSC_0018.JPG

http://lh3.ggpht.com/_BTn9YHMni9Y/R2...0/DSC_0010.JPG

andyc

---

Nice, I like that side mount set, I think I might use that idea..:up:

Quote:

---

Originally Posted by mcoffey

Thanks,

If I were to do it now, I'd use BP D-Plugs. It was tuff getting just the right male to male fitting so everything was just right without being to tight, or to lose. At least on the pump and inlet connections.

andyc

---

Have you used the D plugs? I'd just be a little worried the vibrations and res might work the plugs apart.

I was thinking of a rotary T or something. I've got one MCres, but thinking of buying one more and swapping out my last D5 with a DDC 3.25 whenever those become readily available...Maybe try out Eddy's new V2 DDC top as well.

update:

added ek's dual turbo top...i read in one review..and they say its good...i say some things better with two pumps

Quote:

---

Originally Posted by Hondacity

i'm not sure you have all my compression fittings :D

---

:rofl: Yeah, your right! I forgot about that!!:ROTF:

Quote:

---

Originally Posted by mcoffey

Nice mounting,

Been done long ago, in a land far away:D This was mounted with a male to male g 1/4, but BP D-Plugs work much better. I like using a EK res now myself. Much more volume, and much easier to work with when filling the loop. The new V2 Micro Res is much easier to work with than the older Micro res I used with the side ports.

andyc

---

i still remember alex's comment going WTF when he saw your order for that many. :rofl: