Preview to some weekend fun

Printable View

Show 100 post(s) from this thread on one page

02-18-2009, 10:16 PM
chew*

Preview to some weekend fun

Theres going to be a little action going down in the east coast this weekend ;)

Just finished rearanging my cubbyhole to give us some room to work.

http://members.cox.net/bostonreefer4/IMG_0535[1].jpg
02-18-2009, 10:18 PM
Sparky

I want that monitor.

I like your full-board cooling solution there :D
02-18-2009, 10:19 PM
Movieman

Me..Saturday am..
Varoooooom,screeeeech..:D

90 miles and 90 minutes later..
Knock,Knock..:D
02-18-2009, 10:21 PM
chew*

Benching on mobo boxes is the in thing to do :cool:
02-18-2009, 10:29 PM
mikey063

Wow:shocked: That is a cubbyhole!
02-18-2009, 10:44 PM
msimax

gotta do some sit ups:ROTF:
02-18-2009, 10:46 PM
chew*

Its bigger than it looks ;) well unless dave walks in:rofl:

We can migrate out to here if need be, but i can't control ambients in the kitchen ;)

http://members.cox.net/bostonreefer4/IMG_0539[1].jpg
02-18-2009, 10:50 PM
Movieman

Quote:

Originally Posted by chew*

Its bigger than it looks ;) well unless dave walks in:rofl:

Bastage!:rofl:
02-19-2009, 12:20 AM
mikey063

So Chew which Mobo do you like better so far? Gigabyte GA-MA790FXT-UD5P or Asus M4a79. BTW I like your current thread on the Asus mobo :up:
02-19-2009, 05:25 AM
chew*

Quote:

Originally Posted by mikey063

So Chew which Mobo do you like better so far? Gigabyte GA-MA790FXT-UD5P or Asus M4a79. BTW I like your current thread on the Asus mobo :up:

The gigabyte is a solid board and athough it has it's quirks and some limitations it's still capable of putting out TOP #rs....and already has.

I however am chasing 3dmark multi card records atm so I need to pull out all the stops, 16x/16x PCI lanes included.

I'm waiting for the UD5P to mature a little bit.
02-19-2009, 05:41 AM
LowRun

Quote:

Originally Posted by chew*

Benching on mobo boxes is the in thing to do :cool:

Been running my rig this way for the last 3 years :D
02-19-2009, 05:42 AM
EnJoY

Quote:

Originally Posted by Movieman

Me..Saturday am..
Varoooooom,screeeeech..:D

90 miles and 90 minutes later..
Knock,Knock..:D

You should pick me up on the way. :up:
02-19-2009, 06:26 AM
Raiderman

You know, you could swing......err 2500 miles west and pick me up! :eek:
02-19-2009, 07:48 AM
Hemi345

Quote:

Originally Posted by chew*

http://members.cox.net/bostonreefer4/IMG_0535[1].jpg

Better pick up that french fry before you run it over with your chair :D
02-19-2009, 07:54 AM
chew*

Quote:

Originally Posted by Hemi345

Better pick up that french fry before you run it over with your chair :D

That was a butt, after I posted the pic I noticed it. Dropped ashtray earlier that day.
02-19-2009, 10:13 AM
chew*

Now you can see a picture of an ES ;) Lapping not done all the way but good enough for testing, already killed 2 hours.....

http://members.cox.net/bostonreefer4/IMG_0551[1].jpg
02-20-2009, 09:26 AM
chew*

60L ordered, 30 Lbs DI ordered :cool: making final arrangements and plans with those that were invited.
02-20-2009, 10:07 AM
soundood

wow, this is a little more than some weekend fun...lol

i take it you guys will try and crack a couple of records here ehh?

i wish you the best of luck with it, and look forward to some meaty results :up:

on a side note, do you have your own containers fro LN2 chew*? or just decant from the delivered container into flascs?

i have little over 30 mins left of my weekend peace, friends are on their way over, as i post, after that the beer runs freely all weekend :up:

have fun guys
02-20-2009, 12:16 PM
chew*

Renting 2 30L dewars, Apparently I need to get a ladel, msimax is supplying the thermos for pouring.

My pot isn't done yet so we are using Dumo's and msi max's, Mine has an ETA of 3 weeks. Might invest in a dewar then.

Will be running DI on my home made pot.
02-20-2009, 12:23 PM
iandh

Quote:

Originally Posted by chew*

Renting 2 30L dewars, Apparently I need to get a ladel, msimax is supplying the thermos for pouring.

My pot isn't done yet so we are using Dumo's and msi max's, Mine has an ETA of 3 weeks. Might invest in a dewar then.

Will be running DI on my home made pot.

Too bad you're in R.I. I've got a 20L sitting upstairs collecting dust.

Gonna save up for a backup board and another 720B.E. and make sparks fly hopefully very soon.
02-20-2009, 01:02 PM
chew*

Quote:

Originally Posted by iandh

Too bad you're in R.I. I've got a 20L sitting upstairs collecting dust.

Gonna save up for a backup board and another 720B.E. and make sparks fly hopefully very soon.

Interested in selling it? hows the vaccuum on it?
02-20-2009, 03:16 PM
iandh

Quote:

Originally Posted by chew*

Interested in selling it? hows the vaccuum on it?

Hehe the vacuum is excellent. It was an ebay can with bad vac so I tapped and TIGged in a pipe fitting, then added a 1/4" swagelok w/copper tube, helium leak tested it, and fixed the leak that originally caused it to go bad. Then I heat wrapped it and pumped it out for a few weeks, pinched off the pump-out tube with a refrigeration pinch-off tool, and sealed the pinch with high-vac epoxy. Luckily the leak that caused the bad vac was due to damage on the outside (small crack) and there were no internal leaks (not easily fixable).

The cool thing is that once sealed dewar now is renewable vac, so if it leaks in the future, you could just hook a cheapo refrig pump up to it for a couple weeks and as long as you can find a pinch off tool to use, you are good to go.

Kinda handy working at a thin film vacuum dep. system manufacturer. :shrug:

I was thinking on getting rid of it but now with these cheap, high clocking, cold-loving Phenom II chips available, it may find new life. I'll keep you in mind though if I do decide to get rid...
02-21-2009, 01:36 AM
Lightman

How is party going chew*?
Anything to share at this point or is it too late/early for you?

Good luck! :up:
02-21-2009, 05:55 AM
chew*

Quote:

Originally Posted by Lightman

How is party going chew*?
Anything to share at this point or is it too late/early for you?

Good luck! :up:

Expecting arrivals in the next hour, just woke up.
02-21-2009, 06:16 AM
Raiderman

Let the Games begin!
02-21-2009, 06:52 AM
chew*

Hmmm, phone call, people are running late, means I have to run around and do all the errands solo now...BBL.......looking like lunchtime before people show up now...
02-21-2009, 01:38 PM
EnJoY

I am sitting here on the floor in chew's "lab" as msimax, Dumo, and Chew put the final touches on each of their rigs. I'll be playing the role as coach as I don't have my own setup to bench on. We are doing LN2 on two systems and Dry Ice on the other. Movieman will be doing the video in HD. Gotta go we are starting to pour!
02-21-2009, 03:25 PM
Raiderman

Bout damn time ;)
02-21-2009, 03:36 PM
instred

We'll did you guys freeze yourselfs:D
02-21-2009, 06:37 PM
Raiderman

Hello? Ive been biting my nails since Friday! Any results? Quit drinking all that beer and get your butts in here and post ;)
02-21-2009, 06:39 PM
Movieman

Quote:

Originally Posted by Raiderman

Hello? Ive been biting my nails since Friday! Any results? Quit drinking all that beer and get your butts in here and post ;)

Hell of a day.. and great people. msimax, Dumo, and Chew, great to meet them all!:up:
I'll let chew show the results but think SIX+...:wasntme:
Now as to video, I will plead the fifth on this.
Here I am trying to shoot screenies with 4 other guys in a 6x8' room with 2 machines on LN2 and one on DI..
Can you say cramped?
And as to msimax, you don't shoot over him. You move to the side and hope you don't get stepped on.
One big dude but one I will remember. Just good people!
Dumo is sharp, and a real gentleman to speak with.
chew is just one solid bundle of energy.
I got tired just watching him!:ROTF:
OOPS, forgot Enjoy.. Good kid.. All American type..
Has to be a good kid, he spent 4 hours in a car with me and still has his sanity!:rofl:
02-21-2009, 06:47 PM
EnJoY

Dave and I are home, the guys may still be at it. We had left around 7.

Overall the day was a blast with Chew* manning a dry ice rig, msimax running a an ln2, and Dumo and myself tag teaming a ln2 x4/gtx 295 system that was very responsive and very fun to play with. ;)

I won't spoil anything, so you'll all have to wait for the pics and vids to be posted later on.
02-21-2009, 06:56 PM
Raiderman

lol, man you east coast guys....4 hours in a car, probably both ways? I cant travel across my state in 4 hours.
Anyway, sounds like you guys had a blast, cant wait for some results!
02-21-2009, 07:08 PM
Movieman

Quote:

Originally Posted by Raiderman

lol, man you east coast guys....4 hours in a car, probably both ways? I cant travel across my state in 4 hours.
Anyway, sounds like you guys had a blast, cant wait for some results!

Yup, both ways..:rofl:
App 120 miles each way..
02-22-2009, 12:02 AM
Sampsa

enough talking, show us the pics and scores!! :D :up:
02-22-2009, 12:05 AM
WrigleyVillain

Forget the scores just thanks for not killing or maiming Dave, guys! We need that old bastich! :lol: :up:
02-22-2009, 12:50 AM
gOtVoltage

:sofa:................................wherdja put me beer go......Woot....Rsults found...Chew scratches head .......Need Dice to post results loll... Burp.

Sry ... I cant wait the tension is killn me .
02-22-2009, 01:06 AM
Zeus

Quote:

Originally Posted by Sampsa

enough talking, show us the pics and scores!! :D :up:

+1!!
02-22-2009, 02:06 AM
chew*

Quote:

Originally Posted by Sampsa

enough talking, show us the pics and scores!! :D :up:

well sampsa I think we got you beat on NB speed ;) lost 2 hard drives but I got that on HD video.

My Ln2 results will come In a few weeks, my DI results are consistent if anything I guess. My cpu-z validation was broken even at stock speeds, some one got to my HD before I got a chance to bench on a "FRESH" install and borked something :rolleyes: I couldn't even validate at stock clocks......I took screenies of everything though...

We just wrappped it up around 4am, I'm cleaning up and crashing......Pics,results tommorow...

*EDIT* well was gonna post them now, but my ISP hosting is being repaired so I guess later, While reviewing the screenshots I Noticed that my board apparently at some time Knocked out my timings on my ram :( , No wonder why I thought they were a tad low....O well....
02-22-2009, 10:09 AM
Dumo

Hopefully my other hd will rise from the dead...again:)

Thanks for the hospitality Chew:), I wish there a pizza joint like that in the city.

Its been a pleasure meeting Movieman and Enjoy.

http://img201.imageshack.us/img201/9...enshot005q.jpg
02-22-2009, 10:19 AM
msimax

what can i say i had a blast got to meet the faces behind the names, enjoy very funny standup guy, movieman also a very funny stand up guy and very informative. chew well chews a animal i thought i like to oc this guy goes hard he beat me in a oc
marathon session. like chew said hd went crazy but if dumo cant recover it him and enjoy put up crazy oc 6300mhz:clap: also a crazy aquaM3 and pi. me i was about to shed a tear cause i thought my day was done till i found out what it was:am::rofl:

it looks like some pic corrupt to:mad: i beat my personal best pi then dumo top me then icame back hard but i know pics or it didnt happen:(
i also beat my personal best in nb clocking:D and 3d06 single 06 4870x2

so chew thaks for hosting if and when you another one im there dude:up:

damn that drive im gonna comatose
02-22-2009, 10:25 AM
Movieman

Quote:

Originally Posted by msimax

what can i say i had a blast got to meet the faces behind the names, enjoy very funny standup guy, movieman also a very funny stand up guy and very informative. chew well chews a animal i thought i like to oc this guy goes hard he beat me in a oc
marathon session. like chew said hd went crazy but if dumo cant recover it him and enjoy put up crazy oc 6300mhz:clap: also a crazy aquaM3 and pi. me i was about to shed a tear cause i thought my day was done till i found out what it was:am::rofl:

it looks like some pic corrupt to:mad: i beat my personal best pi then dumo top me then icame back hard but i know pics or it didnt happen:(
i also beat my personal best in nb clocking:D and 3d06 single 06 4870x2

so chew thaks for hosting if and when you another one im there dude:up:

damn that drive im gonna comatose

^^ This poor guy made the mistake of commenting about a dual socket board and got me rolling.
Luckily his hearing should return in a month or two!:rofl:
02-22-2009, 10:28 AM
Sparky

Quote:

Originally Posted by Movieman

^^ This poor guy made the mistake of commenting about a dual socket board and got me rolling.
Luckily his hearing should return in a month or two!:rofl:

Ohh man, captive audience. Can't even set down the phone! Poor guy!
02-22-2009, 10:33 AM
Movieman

Quote:

Originally Posted by SparkyJJO

Ohh man, captive audience. Can't even set down the phone! Poor guy!

:hrhr:
It was a great day. You guys keep hearing me say it's all about the people and it is.
You walk into a house with people you've never met and it's not like that at all..no feeling of "strangers" ..
Then there was chew's rottweiler(sp?)
Here I am sitting on the floor with this 80lb beast with her head in my lap looking at me with the expression of:
" You stop scratching me and I'll have you for lunch!":rofl:
02-22-2009, 11:05 AM
msimax

my o6 run in win7

http://img13.imageshack.us/img13/9723/screenshot033.png
02-22-2009, 11:24 AM
msimax

i also had 11.451 but currupted:mad:

http://img13.imageshack.us/img13/8623/screenshot026.png
02-22-2009, 11:24 AM
Zeus

You guys had a blast, looking forward to the sreens. Msimax, nice result man but what cpu/nb clocks?
02-22-2009, 11:25 AM
gOtVoltage

Wowee 3D in win 7.... ,.Nicenesss.

Heehe , I cant wait for the HD version of you guys,, .
02-22-2009, 11:36 AM
msimax

Quote:

Originally Posted by Zeus

You guys had a blast, looking forward to the sreens. Msimax, nice result man but what cpu/nb clocks?

5.4ghz 4000mhz nb:D
02-22-2009, 11:44 AM
EnJoY

Quote:

Originally Posted by Dumo

Hopefully my other hd will rise from the dead...again:)

Thanks for the hospitality Chew:), I wish there a pizza joint like that in the city.

Its been a pleasure meeting Movieman and Enjoy.

http://img201.imageshack.us/img201/9...enshot005q.jpg

Yea! :up: That was sick! What a blast it was when we first hit that and it didn't blue screen! :D

Dumo, next time it'll be my hardware we torture. :D
02-22-2009, 11:51 AM
Zeus

Dumo, i hate to burst your bubble, but do you have any idea why that validation is rejected by CPU-Z? Unknown CPU maybe? :shrug:
02-22-2009, 11:55 AM
msimax

Quote:

Originally Posted by EnJoY

Dave and I are home, the guys may still be at it. We had left around 7.

Overall the day was a blast with Chew* manning a dry ice rig, msimax running a an ln2, and Dumo and myself tag teaming a ln2 x4/gtx 295 system that was very responsive and very fun to play with. ;)

I won't spoil anything, so you'll all have to wait for the pics and vids to be posted later on.

we didnt stop till like 3~4 in da morning:rofl:
02-22-2009, 12:04 PM
msimax

im gonna have to invest in some better ln2 pots:fact:

http://img18.imageshack.us/img18/194/p2070040.th.jpg http://img11.imageshack.us/img11/2521/p2070041.th.jpg http://img18.imageshack.us/img18/9566/p2070042.th.jpg http://img18.imageshack.us/img18/9788/p2070044.th.jpg http://img13.imageshack.us/img13/1579/p2070049.th.jpg http://img24.imageshack.us/img24/6875/p2070050.th.jpg http://img14.imageshack.us/img14/413/p2070051.th.jpg http://img11.imageshack.us/img11/50/p2070053.th.jpg http://img14.imageshack.us/img14/745/p2070054.th.jpg http://img11.imageshack.us/img11/2261/p2070055.th.jpg http://img14.imageshack.us/img14/8539/p2070056.th.jpg
02-22-2009, 12:05 PM
G0ldBr1ck

Any noticable improvment over the c1 ES chip with the c2 ES?
02-22-2009, 12:22 PM
chew*

Webspace is finally back up.... Enjoy next time it will be your fresh install that gets abused ;) ( It was industrial espionage/sabotage :ROTF: )

So I started out around this speed, Mind you I was not under LN2, this is all DI, home made pot.

System specs
Gigabyte ma790GP-DS4H
AMD AM3 x4 PH II
PC P&C 750w quad
2x4850 reference visiontek
OCZ golds 5-8-8-24 ddr400 SPD (running 5-5-5-15 1066+)
36g WD raptor boot
320GWD aks Bench Drive
Homemade DI pot

http://members.cox.net/bostonreefer3/cinebench.JPG

http://members.cox.net/bostonreefer3/wprime.JPG

http://members.cox.net/bostonreefer3/06.JPG

There is a little inside competition going on between Msimax, Dumo and myself.....when limited to phase or DI. The race to 25K 06, So I cranked up the heat a little more :D Almost 25k.

http://members.cox.net/bostonreefer3/061.JPG

Somewhere along the line of chasing that 25K my motherboard changed my memory timings....didn't realize till I started looking at saved pics :(

http://members.cox.net/bostonreefer3/32mpi.JPG

http://members.cox.net/bostonreefer3/everest.JPG

http://members.cox.net/bostonreefer3/pifast.JPG

At this point I realized That none of my CPU-z validations were saving (enjoy :rolleyes: ) PLan B

http://members.cox.net/bostonreefer3/4900.JPG

http://members.cox.net/bostonreefer3/5050.JPG

I think this is a DI WR for an amd chip..
http://members.cox.net/bostonreefer3/5150.JPG

One last run with PI 1m.
http://members.cox.net/bostonreefer3/PI%201m.JPG
02-22-2009, 12:22 PM
EnJoY

Quote:

Originally Posted by G0ldBr1ck

Any noticable improvment over the c1 ES chip with the c2 ES?

Yes, without a doubt. msimax could tell you more with that as he's played with both now. :)
02-22-2009, 12:29 PM
EnJoY

Quote:

Originally Posted by chew*

At this point I realized That none of my CPU-z validations were saving (enjoy :rolleyes: ) PLan B

What did I do? F7 wasn't working for you? Worked for Dumo and I. ;) You have to make sure the cpu-z window has the focus, then press F7 on the keyboard, and assuming your keyboard is transmitting the keystroke it should deposit a validation file in the cpu-z folder.
02-22-2009, 12:47 PM
Movieman

Time to go and unpack the car and post my pics I think! :sofa:
02-22-2009, 12:54 PM
chew*

Quote:

Originally Posted by EnJoY

What did I do? F7 wasn't working for you? Worked for Dumo and I. ;) You have to make sure the cpu-z window has the focus, then press F7 on the keyboard, and assuming your keyboard is transmitting the keystroke it should deposit a validation file in the cpu-z folder.

All validations even at stock 2.4 gig show up as corrupted...and refuse to validate :shakes: Etc my 5.2 validation is gone.....Most likely due to bluescreening attempting that 4.3 on air with the 720 BE and TRUE, Even reinstalling Cpu-z did not help, most likely the registry is/was screwed.

Not a big deal. Would likely get rejected for Unknown Cpu anyway. I would have taken a screenie though had I known.
02-22-2009, 01:27 PM
EnJoY

Quote:

Originally Posted by chew*

All validations even at stock 2.4 gig show up as corrupted...and refuse to validate :shakes: Etc my 5.2 validation is gone.....Most likely due to bluescreening attempting that 4.3 on air with the 720 BE and TRUE, Even reinstalling Cpu-z did not help, most likely the registry is/was screwed.

Not a big deal. Would likely get rejected for Unknown Cpu anyway. I would have taken a screenie though had I known.

Aww...my bad man. Serves you right for eggin me on though! I had to try! :p:
02-22-2009, 01:30 PM
chew*

Quote:

Originally Posted by EnJoY

Aww...my bad man. Serves you right for eggin me on though! I had to try! :p:

All in good fun man :) Next time Ill let you try with your own drive at colder ambients ;) Fwiw although the same model motherboard it wasn't the board I did it on. Sometimes that makes a diff. My board is extremely tough, could be a cut above the rest.
02-22-2009, 01:46 PM
Movieman

Some pics from the day:
First the victims..
Three very sweet chips:
http://img16.imageshack.us/img16/5273/img0176f.jpg

And the players;
Our host, chew*
http://img16.imageshack.us/img16/4848/img0179b.jpg
Enjoy
http://img16.imageshack.us/img16/4834/img0178.jpg
Dumo
http://img440.imageshack.us/img440/6586/img0180.jpg
msimax;
http://img16.imageshack.us/img16/5065/img0181n.jpg

First shot at over 6GHz;
( I think this took Dumo 30 seconds to get to!:rofl: )
http://img16.imageshack.us/img16/584/img0182m.jpg
The guys at work:
http://img440.imageshack.us/img440/9795/img0183.jpg
60 litre's of LN2
http://img440.imageshack.us/img440/2189/img0185.jpg
Some Superpi 1m
http://img26.imageshack.us/img26/825/img0188.jpg
02-22-2009, 01:59 PM
Raiderman

Dang....either that refrigerator is reaaaally small, or msimax is reeaaally big..
I cant see the top of my fridge! :shocked:
02-22-2009, 02:07 PM
Movieman

Quote:

Originally Posted by Raiderman

Dang....either that refrigerator is reaaaally small, or msimax is reeaaally big..
I cant see the top of my fridge! :shocked:

msimax is a big GUY..and a good one..:up:
02-22-2009, 02:14 PM
CyberDruid

Awesome thread! Thanks for the virtual tour into the OC Highlands! Great work.Glad to see AMD has got a winner.
02-22-2009, 02:34 PM
systemviper

EAST COAST ROCKS :up:
02-22-2009, 02:40 PM
freeloader

Some very nice results! :D
02-22-2009, 02:45 PM
chew*

This is just the beginning, running 3 systems at once although sounds nice in theory is rather hectic.

Future plans are in the works and next time I think we will focus on one system as it just makes life simpler.

I however think if there is a guiness book of world records for the most hardware and people overclocking at sub zero temps in a 6' x 10' room we would be #1 :D

I just got my hands on ddr3 so hopefully I can delve into this department as buying high performance ddrII at this point in time doesn't make much sense. All my results were done on a low budget set of OCZ golds.....
02-22-2009, 02:49 PM
Movieman

Quote:

Originally Posted by chew*

This is just the beginning, running 3 systems at once although sounds nice in theory is rather hectic.

Future plans are in the works and next time I think we will focus on one system as it just makes life simpler.

I however think if there is a guiness book of world records for the most hardware and people overclocking at sub zero temps in a 6' x 10' room we would be #1 :D

I just got my hands on ddr3 so hopefully I can delve into this department as buying high performance ddrII at this point in time doesn't make much sense. All my results were done on a low budget set of OCZ golds.....

I'm forgetting my manners;
My thanks to you and your Mrs. for having me down.
Was a great time and a day I'll remember.:up:
02-22-2009, 03:09 PM
chew*

Quote:

Originally Posted by Movieman

I'm forgetting my manners;
My thanks to you and your Mrs. for having me down.
Was a great time and a day I'll remember.:up:

Don't have to thank me ;) the TRUE was more than thank you enough and will be put to good use. Glad we could finally meet up in person.

The Mrs. well No one could ask for someone more understanding and patient. The kitchen is "her space" without her help and patience, yesterday would never have happened as I was a tad short on funds.

I must say that the stars of this show were the cpu's, they are very very resillient and can take quite a bit of abuse......as for some of the reports floating around.....I was cranking 2.2-2.3v to my golds.......and we pushed up to 1.9v ( we ran out of volts :shrug: ) into the cpu's and everything still works fine......
02-22-2009, 03:21 PM
Raiderman

Behind every computer geek/techie/OCer, there is a very patient Mrs. I know my wife puts up with alot from me...."What did you buy now?", "ummm, computer parts."
02-22-2009, 05:09 PM
chew*

It appears that 3d run would place me as 17th in the world for 06 2 x 4850's ;) I'm just getting warmed up, next up LN2, and if needed voltmods and chilled cards :D

Enjoy, Fresh install seems to validate fine now.
http://valid.canardpc.com/cache/banner/514110.png
02-22-2009, 05:40 PM
msimax

:wasntme: one of my reserved settings

http://img9.imageshack.us/img9/9103/p2070052.jpg
02-22-2009, 05:56 PM
chew*

reserved for T - 3 weeks and counting? ;) POT should be here by then, I will give it a go as soon as it does to see how it handles the load.
02-22-2009, 06:48 PM
freeloader

Quote:

Originally Posted by chew*

reserved for T - 3 weeks and counting? ;) POT should be here by then, I will give it a go as soon as it does to see how it handles the load.

Holy :banana::banana::banana::banana:e! That's some pretty wild voltage. :clap::shocked:
02-22-2009, 07:56 PM
chew*

Just checked the footage, caught a few things you guys lost so no biggie, My 5.2+ validation was caught in realtime as well.
02-22-2009, 08:53 PM
msimax

still looking for stuff

http://img10.imageshack.us/img10/1857/scr81e0ee.jpg
By deeodee
02-22-2009, 09:29 PM
chew*

Got you covered on the 4600 NB speed shot, Gonna screenshot it while viewing the video on my rig ;)
02-22-2009, 09:32 PM
msimax

thanks
02-22-2009, 10:59 PM
chew*

Pot is done, now i just have to wait for it in the mail.

1200 grams :cool:
http://members.cox.net/bostonreefer4/LN2%20pot.jpg
02-23-2009, 01:12 AM
N19h7m4r3

Crazy stuff!

Looks like you guys had a blast.

If only you could tell us which CPU that is, I like that it shows Opteron in CPUZ though :p:
02-23-2009, 01:39 AM
jasonelmore

where's a pic of dave? Glad you guys had a great time
02-23-2009, 08:32 AM
chew*

I managed to fit all of him in a few clips on HD video :ROTF:, you guys will see it soon enough.
02-23-2009, 09:41 AM
Movieman

Quote:

Originally Posted by jasonelmore

where's a pic of dave? Glad you guys had a great time

They tried but every time they pointed the camera at me it went :shocked::sofa:
I think Brian got a shot of me sitting on the floor with the dog in my lap!:rofl:
02-23-2009, 10:11 AM
chew*

Found something I forgot to screenshot, 3d05 :up: 2 x 4850's.

http://service.futuremark.com/compare?3dm05=4761410
02-23-2009, 11:57 AM
chew*

Teasers until I can get high quality shots from the video, I took these with my camera while viewing the video in HD.

MSI's rig :cool:
http://members.cox.net/bostonreefer3/4600nb.jpg

My 5211 on DI
http://members.cox.net/bostonreefer3/5211.jpg

My pot 100% ready to be shipped :) Hopefully this won't boil out 2 pot fulls of LN2 in an 06 run.....

http://members.cox.net/bostonreefer3/LN2%20pot2.jpg

http://members.cox.net/bostonreefer3/LN2%20pot1.jpg
02-23-2009, 11:59 AM
Zeus

Very nice pot chew! Have lots of fun with it. :up:
02-23-2009, 12:01 PM
CyberDruid

Already getting set for your next bash:woot: Thanks for the vicarious OC:D
02-23-2009, 12:04 PM
chew*

Quote:

Originally Posted by Zeus

Very nice pot chew! Have lots of fun with it. :up:

I call it the inspired by macci edition on a budget :D

Vince has very nice pots but $:shrug:$ when I do this lint comes out of my pockets.
02-23-2009, 12:24 PM
gOtVoltage

Quote:

Originally Posted by chew*

I call it the inspired by macci edition on a budget :D

Vince has very nice pots but $:shrug:$ when I do this lint comes out of my pockets.

Haaa i know the fealing!

Great Job Chew and Crew:D

Amazing results and the Volts too,, I think PHII can handle it very well i must say.

You definatly pushed the TwilightZone of AMD. hahaahaa 3-4am. OMG:woot:http://i168.photobucket.com/albums/u...ierra/thbb.gif
02-23-2009, 12:41 PM
soundood

what can i say? congrats i suppose, on a wonderful all round fun weekend:up:

nice to see pics of all of you, and some fantastic screens and shots of benches, dumo's 6 gig in under 30 secs....lol.

but yeah i see you all, but no movieman? so he is a ghost after all? :rofl:

i look forward to the video now, thanks for posting the event :clap:
02-23-2009, 01:08 PM
chew*

Hmmmm seems my golds took a dive :( my fault, I crammed 2.3 into them, won't run 5-5-5-15 1066 stable anymore, probably why the board backed off my timings.

Looks like i'm gonna have to grab another set of ddr II.
02-23-2009, 02:06 PM
soundood

that doesnt seem to much of an overvolt 0.1v ? i take it they use 2.2v for EPP 1066 mhz 5-5-5-15?

and i dont think they would ruin that quikly also, bios issue maybe? had a go with them in another board yet chew*?

i will be very surprised if it is the ram
02-23-2009, 02:14 PM
chew*

yah they are rated for 400 5-8-8-4 2.1v SPD :rofl: no biggie its just the spare set I have are the duds from this set.

I can still work with them though for now as you will see in a second.

Felt the need to redeem myself.

Guess I lied No rest for the wicked or weary.

New aquamark 3 WR for 2 X 2600 pro's in Xfire comes home to AMD, kept a backup at higher clocks in reserve but a 25K lead should be fine for now.

http://members.cox.net/bostonreefer3...600%20pros.JPG

http://members.cox.net/bostonreefer3...00%20pros2.JPG
02-23-2009, 02:22 PM
soundood

very nice chew* :clap:

i was never a fan of the 2900's (or any ati for that matter) but very nice to see this coming back to AMD :up:

was this on the M4A79?
02-23-2009, 02:26 PM
chew*

Quote:

Originally Posted by soundood

very nice chew* :clap:

i was never a fan of the 2900's (or any ati for that matter) but very nice to see this coming back to AMD :up:

was this on the M4A79?

nah still on giga, m4a scores higher 16x 16x crossfire ;)

IGP 3300 aquamark 3 going down in a few :D

LMAO I just had it by 2k points and I opened aod and forgot to open as admin :shakes: AOD pwned me
02-23-2009, 03:21 PM
chew*

Here we go aquamark 3 WR hd 3300 IGP 3k point lead ;)

http://members.cox.net/bostonreefer3...3300%20igp.JPG

http://members.cox.net/bostonreefer3...300%20igp2.JPG
02-23-2009, 03:25 PM
msimax

nice:p:
02-23-2009, 03:26 PM
chew*

Quote:

Originally Posted by msimax

nice:p:

and with ram thats almost kicked the bucket to boot :rofl:
02-23-2009, 06:15 PM
Raiderman

Oh man, you know we should do a big shindig in the midwest somewhere. That way everyone that wants to come could meet halfway. Somewhere like Omaha, NE.
I have family in that area, we could probably borrow some space from them, and whoop it up!!!

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 06:44 AM.

XtremeSystems