Printable View
found me 3x256mb D9DCD's stock on them is DDR533 4-4-4-12
http://img.techpowerup.org/090131/Capture032.jpg
http://img.techpowerup.org/090131/Capture033.jpg
@3v
http://img.techpowerup.org/090214/Capture045.jpg
@3.5v
http://img.techpowerup.org/090214/Capture046301.jpg
i appear to have killed my phenom II trying to push these ROFL
sticks and cpu are in the freezer now wonder i they will post again
Doh! So you damaged the memory controller on your Phenom II?Quote:
Originally Posted by cdawall
yep it locks on det dram according to my LCD post readout thingy
albiet i was runnign the ram@3.5v and all the things relating to DRAM @+10mv
Man , why didn't you buy some 1066 DDR2 which are very cheap, i hope that they will replace your CPU amd MB at RMA.:yepp:
pushing older d9's is fun i have a stick of hnh thou it wont go much past 450mhz at cas 6
i have some good 2x2GB that does 1260+ this was just for funQuote:
Originally Posted by xdan
it is these should go higher i have seen cas 5 1200 on these but that was @3.6v and i'm topped out@3.5v need to figure out how to get this mobo up to 4v :rofl:Quote:
Originally Posted by whe3ls
i killed some 1066 Reaper by running them at 1250 for a bit. @2.21v
:rofl: Sorry but that is hilarious. Isn't ~2.2v max for the PII?Quote:
Originally Posted by cdawall
Grab an intel platform for DDR2 overclocking. AMD can't handle it.
oh it will handle it i dont care if i go through 5 more chipsQuote:
Originally Posted by CryptiK
haha :rofl:Quote:
Originally Posted by cdawall
You killed IMC, its similar to problem that has i7. 45nm + IMC = low voltages only.. tough Phenom II can survive much more than just funny 1.65V. :)
Anyway.. nice OC, over 100% :D
haha.. Phen 2 and i7 are pansies.
and you think i'm kiddingQuote:
Originally Posted by madmax999
that was only more than double the voltage killing i7 :pQuote:
Originally Posted by Mescalamba
are not :p although i'm going to give it a crack with my lowly 3500+ it will do over a 300mhz bus speed so this should be interestingQuote:
Originally Posted by Ket
Lmao, just give em to me, don't kill em!:rofl:Quote:
Originally Posted by cdawall
now were is the fun in thatQuote:
Originally Posted by Hockeydude
FM frequencies go over mountains.
http://img.techpowerup.org/090217/Capture047.jpg
just for more :banana::banana::banana::banana:s and giggles
http://img.techpowerup.org/090217/Capture048.jpg
http://img.techpowerup.org/090217/Capture049.jpg
Just insane volts and memory :shocked: 4-4-4-12 1120Mhz...
they are back in the freezer as they are already showing electron migration
lol they dead yet ? I feel like pulling some of my old fatd9's out I have in teh draw.
they didn't want to boot anymore after like 3 days of abuse but i tossed them in the freezer hopefully they will be good as newQuote:
Originally Posted by A||uSiOn
You're totally seek mate, but I love that :D
I have some 512gb sticks by Geil (PC8500) pushed up to 650 atmo with 3v, but should take 3,5v like yours to get 700, but never on PHII or I7 platforme xD
Do you know what "Kurd Staĸle" means ? Imo your a master cdawall in that art :rofl:
Don't care about our jokes mate, we're just kidding and nothing else ;)
hehe i played with them on my athlon 64 90nm chip and they clock just as high with no ill effects on the cpu
OMG! itīs soo crazy 3,5V to the DDR2 :D
I'll be posting some scores with this voltage even if mines ain't D9 :D
Cus that's really fun mate...cool it down, cool it down .... ^^ (just 2x80 enermax on them)