Vapor's Club Sandwich....now Rev 1.1!

Okay...so awhile ago I bought one these to play with:
http://img397.imageshack.us/img397/6135/h20220yp1.jpg

It already has a name though...H20-220 Compact :p:

And I wanted to modify it a little bit...I really liked the two-part form factor (it's an external 'play' unit...so the lack of pump and res is really beneficial :)).

But I wanted to take it a step further...so I improvised and also removed all external moving parts (no damn fans to get my fingers chopped up in!)
http://img55.imageshack.us/img55/6571/h20520ys6.jpg

Oh yeah...and that's just Rev. 1 :p:

So any ideas for a name for it? I have some performance numbers somewhere in my Documents folder...well, a few .XLSX files filled :p:

"damn strong cpu cooler" ?

just off the top of my head

Project "Vapor being Bored"

:rofl:

Or the compact 600.

Icooler...........

The Vapron!!!

Sweet Mother of All Overkill, or SMAO for short :D

How do you make sure the MCR320 is bled fully? I'd bet there'd be a huge air bubble at the top if you always keep that res/220 upright.

As for a name, I haven't the slightest idea.

So far I'm definitely liking "Vapor Being Bored Rev. 1" :p:

FWIW, the shrouds are 19mm thick fans that I removed the giblets from. 25mm required screws that were too long to get 'into' the San Aces :lol::(

Rev. 2 will be a big step closer toward overkill :yepp:

Bleeding took time, that's for sure...fortunately it's fully external so I can bleed it, fill it, and position it in any and all orientations until it's just right :) (basically have to make sure the entire loop is full before you even turn the pump on and then let it work).

I reversed the flow order since I took that picture and it was a lot easier to bleed that time :)

The Vapenator.............

Quote:

---

Originally Posted by fart_plume

The Vapenator.............

---

+1 for that one.

How about the "Slacker's Stacker"?

Vapor's Club Sandwich

Quote:

---

Originally Posted by systemviper

Vapor's Club Sandwich

---

This.

Vapomatic Rev.1
Vaponaitor
Vaponheimer
Vapo Sandwich
Vapotron 9000

Double Sandwich Vaporizer. :D

Quote:

---

Originally Posted by systemviper

Vapor's Club Sandwich

---

this gets my vote:up:

Radical Rev1

or, don't make it at all and call it Vaporware :rofl:

Quote:

---

Originally Posted by Rise

Radical Rev1

or, don't make it at all and call it Vaporware :rofl:

---

Yeah, don't name it rofl. :rofl:

Quote:

---

Originally Posted by systemviper

Vapor's Club Sandwich

---

gets my vote.

Some performance numbers are below :)

Average of 2 mounts on the TRUECu (from my HSF testing), 3 for the WC systems.

I tested 10 fan configs for the VBBr1, but the notation for expressing it is a little difficult....here's the best I've come up with: a 0+1, 1+0, 1+1, 2+0, and 2+1. All at 1300RPM and then again at 2500RPM.

0+1 = 0 sandwich fans, 1 outside fan
1+0 = 1 sandwich fan, 0 outside
1+1 = 1 sandwich, 1 outside
2+0 = 2 sandwich, 0 outside
2+1 = 2 sandwich, 1 outside (all three fans on)

For the graphs below, 1+0 = single, 2+0 = dual, 2+1 = tri :)

H20-220 was in pull, shroudless, stock fans....single fan results should emulate an H20-120. :) TRUECu was in pull for single fan and push/pull for dual fans....Noctua P12 was used for 1300RPM fan, S-Flex Fs were used for 1600RPM fans, UK2s were used for 2000RPM fans, Panaflo U1As were used for ~2500RPM fans. Because the fans aren't consistent throughout (TRUECu testing was for a HSF roundup I did...just felt like carrying the data over for comparison reasons and changing out the San Aces in the sandwich is a veritable PITA), there is some fuzziness in the data to be considered :)

Sustained load:
http://img135.imageshack.us/img135/8053/vcsr1susmc1.png

Peak load:
http://img149.imageshack.us/img149/7947/vcsr1pksx7.png

...I'll go copy over my methodologies from my HSF comparison thread, the datalogging techniques were identical throughout :)

(and fwiw, the TRUECu is a really, really good aircooler....a lapped TRUE is pretty far behind and that's was known as the 'best' until the TRUECu came out ;))

Call it Vapo Rub.

Vapor Raper 4000

Anyway, have you got anything.... hotter to test it with? Quads?

That was with a QX6700...bah...that's what I get for doing copy and paste in a hurry! :(

Changed name to Vapor Club Sandwich r1 in the graphs, my favorite so far :p:

EDIT: uploading the graphs with the correct title now...here's the thread with all the testing info goodness :p: http://www.xtremesystems.org/forums/...d.php?t=209230

I see. Was starting to think it was some REALLY crap ES E6700 dual core that burns.

It's an "England Bus"...one of those big double decker busses. :D

Rip, I have an E6700 like that...just it's not crap when you look at the clockspeeds :p:

Call it 'Dave'. Never fails...

But its not old enough, nor does it have white hair and bushy eye brows. And to truly be called Dave, it needs a pink tutu. :rofl: :rofl: :rofl:





I'll just see myself out for a short vacation and save Dave the trouble.

Quote:

---

Originally Posted by karbonkid

Call it 'Dave'. Never fails...

---

WINNER!! :up:


sure pick on dave while he's at CES. :rofl:

WE can also pick on marty too! oops.. *praying they dont get wifi in hotel*

Quote:

---

Originally Posted by skinnee

I'll just see myself out for a short vacation and save Dave the trouble.

---

dayam i better join ya... i got marty on me now too. :rofl:

Vapor H20 Squared

VaH20?

H20 Vaporad

That avatar I had Marty swap for him is never going to die is it?

Quote:

---

Originally Posted by fart_plume

That avatar I had Marty swap for him is never going to die is it?

---

Nope.

I am so Dead................

I'm really surprised by the lapped TrueCu. It's amazing.

Vrankenstien:shrug:

Vapowich

And with shrouds... Vapowich with Cheese.

Quote:

---

Originally Posted by skinnee

Vapowich

And with shrouds... Vapowich with Cheese.

---

Not bad me like:)

I think I'll stick with "Vapor Club Sandwich r1" :)

Rev2's goal will be to integrate an excessive and adjustable pumping system into the rad/res ;)

It'll give me the ability to use any block(s) I want :D. Hopefully I'll be able to add on to the plethora of thermal testing already here at XS :D

EDIT: I just saw skinnee's "Vapowich" and I'm starting to like that as well! :)

Heatbuster

vapor bust out the scareface accent and go meet my little friend.

VAP 9000 should do nicely.

Heat Vaporizer?
Fan Squeeze?
Fan Channel?
Fan Tunnel?
Vapor Channel?
Vapor AirStream Channel?
FIFO Tunnel?

VapoRad 120.5!

VCSr1.1 results! :p:

VCSr1.0 is exactly as above with the following loop order:
Apogee Drive -> MCR-220 Res -> MCR-320 -> Apogee Drive

VCSR1.1 has the following loop order (was done so it's easier to bleed more than anything, but the results were great!):
Apogee Drive -> MCR-320 -> MCR-220 Res -> Apogee Drive

Blue = gets airflow FIRST, red = gets airflow SECOND

Average core temps:
http://img179.imageshack.us/img179/7...sr11susxy0.png

Peak core temps:
http://img185.imageshack.us/img185/2348/vcsr11pkro3.png

VCSr1.2 will probably get running tonight :)
VCSr1.3 tomorrow :up:
VCSr2.0...probably 10 days :) Need some ideas for which CPU blocks to buy for testing (am 99% sure I'm going to buy Koolance 350, Swiftech GTZ, and EK Supreme so far...considering AC XT Di as well....LGA1366 and compression fitting compatibility is greatly preferred).

EDIT: clarification of terms: "All out" means lapped + insane pressure mount. "Stock" means stock, so stock fans (maxing out at 2000RPM, not 2500 as in the graph) and HydrX were used. "All 1300RPMs" and "All 2500RPMs" means that two fans at said speeds were used for the TRUE(Cu) and the H20-220 Compact and that three fans were used for the VCSr1.X!

you're already going to have a rev 2.0 that quickly?

sit back and enjoy the results for a change :p:

Vapor, how about you give the Enzotech Luna a shot? It's a new block that is supposedly quite good (albeit rather expensive). And maybe a gelid RT12 fan :wasntme:.

Hmmm, completely overlooked it, but it looks interesting for sure. 3/4" compressions not working is a minus, but survivable :p:

As for the Gelids, I think I'm done with fan testing...and getting 25mm fans in the sandwich would be basically impossible the way I have set it up now :-/ (I'm guessing that's what the RT12 is....google search turns up nothing :()