Printable View
Attached is the First version of the XtremeSystems Compression fittings Chart!
I will add to it on a weekly basis and update the root file here :)
Please post new findings on this thread and they will be added :up:
V1 was by our member zlojack and I have now taken over maintenance of it, thankyou for your contribution man :)
http://img120.imageshack.us/img120/6007/chartpiccs5.jpg
Danger Den Tieton GPU block works with 7/16ID 5/8OD BitsPower compression fittings, on the copper side only and not using the back plate (only using RAMSinks).
Also, D-Tek FuZion V2 works with the 7/16ID 5/8OD fittings as long as you use 45degree rotary fittings.
OCZ Hydroflow, all compression fittings in the chart above fit.
k guys, it will be a few hours before I can recreate the spreadsheet ;) I will format it in a more XS themed manner :D
can someone hook me up with a 400x120pixel wide koolance logo for the chart? thanks
Why bring up the past...
I dont care what he wishes, he has no copyright on a compatibility chart and all XS users have a right to data that was compiled from our postsQuote:
Originally Posted by Eddie3dfx
Then compile it yourself, or at least ask me...Quote:
Originally Posted by SNiiPE_DoGG
That was pretty low.
No lower than yanking it.Quote:
Originally Posted by zlojack
Do you even know why I yanked it?Quote:
Originally Posted by Waterlogged
Have you asked me?
Both you and Sniipe_Dogg are making some assumptions about me without even asking.
All Sniipe had to do was shoot me a PM and ask what had happened. Instead, he decided to steal my work. Great! :clap:
I know that most of the information was put up there by the community and that all I did was compile it. I also had everything hosted with Bobly and was looking for a different place to host it.
But whatever...
That was a complete lack of respect by you Sniipe_Dogg. I've never been anything but courteous with you. All you needed to do was PM me and we could have sorted this in no time if you wanted to recreate the stuff here.
Bad move...bro. Bad move.
I've been told by a little birdy
If this is not the case, please, do inform us.Quote:
They are removing all "information" from various sites and only posting it on "his" site. They are looking to market it to vendors and manufacturers for exclusive deals on parts and testing.
BP 3/8 (5/8) will not work on the AquagrattiX for HD 4870 X2.
Posted for the benifit of XS community ...
I don't know anything about that.Quote:
Originally Posted by Waterlogged
I know that I had the info hosted with someone else, so I took it down.
If Sniipe wanted to rehost it and put it back up, all he needed to do was PM me.
I thought that he and I at least were at that level. :shakes:
:stick:Quote:
Originally Posted by zlojack
Wait, you mean to tell me that you deleted the entire topic because you needed to re-host an image? :rofl:
guys stop fighting, SNiiPE_DoGG had the right to do it, as we the XS guys gave you what to put down :)
right SNiiPE_DoGG, with The BP and TFC the same measument fittings have the same measuments so whatever you have done on the BP do on the TFC and so on
understand?
Ok, I'll ask. Why did you pull it from XS?Quote:
Originally Posted by zlojack
edit: Just read, ok, if rehosting was the issue then snipedog did you a favor and saved you the time.
My thanks for taking the time to make this chart.
No worries.
As I said...I have no problem with the information being made available since it came from the users themselves and I just collected it. My issue is just the way Sniipe went about it and the continued sideswiping in which you'll notice I haven't taken part. (At least MM had the decency to edit the snide remarks from the first post). I've now PMd Sniipe about this so I'll leave off with the continued commenting in the thread. Happy watercooling people and :welcome: for the chart ;)
And yes, Waterlogged, I deleted the post, not realizing that it would kill the whole thread (I thought only mods could do that). It was not my finest moment. :down:
I am creating a new spreadsheet now, it will be maintained by me and this is all a moot issue
After reading all it is quite possible that all of this was a misunderstanding of what was happenning and I'd suggest to all that we look at it that way and move on.
Happy New Year to all of you.
Dave
Happy New Year FTW!!!
:sofa:
Actually on a serious note, will feser ever make 7/16 compression fittings?
haha, yerp >http://www.feser-one.com/site/produc...roducts_id=317Quote:
Originally Posted by Eddie3dfx
Happy new year.
Please don't ban me :rofl:
He meant 7/16" I.D. ;)Quote:
Originally Posted by bentleya
i knew that i was just testing, that you all clicked my link :) and the answer is yes haha :) but TFC will have lots of new stuff next year, so i would guess there would be some unless they are not allowed to make them
That...is the first step to shilling....and shills are shot on sight. :frag:Quote:
Originally Posted by bentleya
...and honestly, you should be shot just for posting a link to that :banana::banana::banana:gy site in the first place. :p: (j/k)
well i'm sorry if i tried to make a joke out of a mistake i man :shakes:Quote:
Originally Posted by Waterlogged
and just turn your sound of, it;s a well designed website, if you have the sound off :up:
I think you misunderstand. I just don't want to see you make the same mistake some other "Fester" loyalists have made in the past.Quote:
Originally Posted by bentleya
i think i have miss understood, what mistake have they made?Quote:
Originally Posted by Waterlogged
Well my dyslexia (got it big time) i just get confused and mis understand, i can;t help it :shrug:
First post updated with new spreadsheet, can someone who has a big monitor SS the spreadsheet, I'm on my laptop so I dont have enought resolution ;)
YGPMQuote:
Originally Posted by bentleya
Quote:
Originally Posted by SNiiPE_DoGG
Had to zoom out a bit to get it the whole thing to fit on my 24", let me know if this is fine:
http://img187.imageshack.us/img187/8...ittingsnj0.jpg
Who said Bitspower 3/8" compression would fit the FuZion v1?? :mad:
Tried it this afternoon but it was a no go! I was going by this list so assumed it would fit but found out the hard way it wasn't to be.
Fortunately i had 1 Bitspower 45º angled piece so i could finish my loop but i had planned this 45º piece on top of my XSPC reservoir top.
Will redo my loop when i have a new 45º piece.
Please corrrect this in your list.
It depends on the OD Zeus. Which OD are you using? 1/2" or 5/8"
The chart has no data on 5/8" OD because it hadn't been confirmed.
Only 1/2 OD. 10mm/13mm. No fit, not even with the barbs touching each other, couldn't get the second one in when the first one was in, not even with brute force.
Did BP redesign their fittings maybe?
I will make an edit, thanks for the heads up, sorry we didn't get that right :(
I was just wondering if the Fuzion V1 fits these Bits Power fittings? :)
http://www.performance-pcs.com/catal...ducts_id=24267
I dont think so, the 5/8" OD 3/8 comps dont fit on the V1 so I dont think those will either.
yups, its confirm by my friend, 5/8 OD will not fit on V1 or V2, but don't know with the koolance one, coz they have a bit profile besides BP/feser/DD com fttings..
Do anyone know what I will be able to use with my Fuzion V1?
Is there not a single BP fitting I can use to get a clean and pretty seal over my 7/16" tubing from Masterkleer? :( :( :(
:cry:
I just got these from DD for use with my MasterKleer 7/16"ID 5/8" OD >>>>
http://www.sidewindercomputers.com/bi7cofifor5o.html
There is also black sparkle ones at Performance-PC's
Are you saying you do not think they will fit, or you just did not see them yet?
Plan to use them on a Aqua Computer Cuplex XT DI, seem to fit for sure but have not put them into use yet.
Why is there no 7/16" Listed in the first post? I came into this thread to check and add my findings about 7/16"
I will post my images/findings about the cuplex and 7/16" Fittings once I get it up and running tonight or tomorrow
if you want to use comps on a fuzion of any type just buy some 45 degree rotary adapters, they work great :up:
Then I will have buy some then. :)
The only problem is that they look a little bit big. =)
Quote:
Originally Posted by a573573
I'm gonna say that no ones bothered to test and report yet. This is how this topic is supposed to work, if ppl don't test and report, this topic is going to become kind of stagnant...so get crackin' ppl.:D
Ahh, Ok! Just wondered why no 7/16" had been added! I will post my findings for sure, for BP 7/16" fittings with MC-TDX and Cuplex XT Di
Someone correct me if I'm wrong (haven't had much sleep), but I assume the 7/16" ID x 5/8" OD compression fittings should fit whatever works with the 3/8" ID x 5/8" OD fittings ... since the outside diameter is the same...Quote:
Why is there no 7/16" Listed in the first post? I came into this thread to check and add my findings about 7/16"
I will post my images/findings about the cuplex and 7/16" Fittings once I get it up and running tonight or tomorrow
Logic would indeed dictate that this is the case...unfortunately, real life is not always logical, safer to have someone physically check/confirm. ;)Quote:
Originally Posted by shazza
I've got both sizes of the Bitspower fittings, but I won't be home until Friday. If memory serves me, they are the same size - as the only way I could tell them apart was the inside diameter but agree it's always best to double check.Quote:
Originally Posted by Waterlogged
Confirmed BP 7/16" Compressions Fit Aqua Computer Cuplex XT DI
Looked to be a bit tight on one of the acrylic threads bit sealed up no problems
I want to put some 45 degrees bitspower 1/2 (3/4) on a mcw-60 and a mcw-30. will its fits?
This is great info to have, thanks all
1/2 (3/4) compressions from Bitspower does not fit the Danger-Den MC-TDX.
EK Water Blocks EK-NB/SB 5 - Acetal & The Feser Company Fittings 3/8 (1/2) don't fit :/
This must be the right thread to ask this question. :)
Do anyone know if it's possible to fit the Bitspower Compression fittings together with the Swiftech MICRO-res? Without any mods I mean.
Reservoir:
- http://www.performance-pcs.com/catal...ducts_id=24649
Fittings:
- http://www.performance-pcs.com/catal...ducts_id=24267
Note to myself: Read the description on the webpage. "The reservoir is now 1/4" BSPP (G1/4) compatible." :)
Phobya CPU block
BP 1/2-3/4 - No
Koolance 1/2-3/4 - No
Koolance 3/8-1/2 - Yes
Koolance 3/8-5/8 - Yes
[QUOTE=LockBreaker;3569621]This must be the right thread to ask this question. :)
Do anyone know if it's possible to fit the Bitspower Compression fittings together with the Swiftech MICRO-res? Without any mods I mean.
Reservoir:
- http://www.performance-pcs.com/catal...ducts_id=24649
Fittings:
- http://www.performance-pcs.com/catal...ducts_id=24267
Note to myself: Read the description on the webpage. "The reservoir is now 1/4" BSPP (G1/4) compatible." :)[/QUOTE In which outlets are you wanting to add the compression fittings
ooooh I need to make an update on this, I will work on it tomorrow during my useless physics class (I already know all of phys 1 and 2 haha, I just need the college credits to prove it ;))
EK FC 4870 fits 1/2-3/4 BP Compression
Add BP 7/16 will be nice.Quote:
Originally Posted by SNiiPE_DoGG
Hey guys, just some info. The TFC and Bitspower compression fittings are not made by the same manufacturer. They are close but not the same size.Quote:
Originally Posted by bentleya
I spoke with Gary last week, regaurding these same problems we are all trying to figure out. "What fits and what does not." Gary spent a great deal of time and effort testing and measureing each fitting he does stock. Although he does not carry every fitting and no Koolance, his list is exact.
I am only trying to be helpful so please don't flame the crap out of me :) Seems to be alot of fighting about this list.
Last thing, with the Bitspower comp. fittings and the GTZ you need to add an extra washer to be sure it fully compressess, because of counter sunk groove on the GTZ and the counter sunk o-ring on the Bitspower comp. fittings. That is my settup, and what I thought was the fitting tightend down, was actually the metal hitting the top of the block. I had some major leaks and could not figure out why till I read the review of the GTZ from Martin.
Just my 2 cents.
Sniipe....fwiw, I was unable to get Koolance 3/8(1/2) fittings to work on a Fuzion V2 CPU....even my BP 3/8(1/2) are scraping together as I tighten down.
k, and I will try to work with gary's dimensions too.Quote:
Originally Posted by Vapor
as for the update, I am sorry it has been so long.... I don't have excel on my big rig ATM and its too tempting to play with solidworks. I will get it done sometime very soon, my apologies for the delay :\
it can but with slightly hassle ..i just got my koolance comp fit 3/8-1/2 fit yesterday...and yes, it is scraping together when i'm put it my Fuzion V1,but after few times, i managed to put the koolance into Fuzion V1...all you have to do is give a slighty pull on which comp fit to opposite direction and go for the second comp fit to put...i can't give any ss now, my cam still borrowed, but i'll try to give pics asap..Quote:
Originally Posted by Vapor
Mine are totally interlocked unfortunately :-/ I had to pull the BPs apart to mount them and they're noticeably smaller.
I guess there's some variability in these products :p:
It's a tight fit but it's work with mine,Quote:
Originally Posted by Vapor
http://www.plikimage.com/images/61o22492.jpg
Vapor, Boyu,...very odd, you guys are starting to scare me a bit. I'm planning on moving away from my quick-fits and go with Koolance on some of my planned builds, but not if this becomes a problem. I have 1 set of 3/8"x 1/2" here and they fit both the v1 and v2 well enough.
This was a bit of a bad angle but you can still see some of the gap between the fittings. I can take a better pic if needed.
http://img291.imageshack.us/img291/6...lexedv2gk8.jpg
My v1 was a bit closer though, but still didn't touch at all.
http://www.xtremesystems.org/forums/...0&d=1207291094
wow waterlogged, you do have at least a gap between them...
but in my V1 they go really tight, much worse than Boyu i think..i tried to pull them opposite to see if they can create a gap little bit, like you do, but to afraid i will damaged the thread mouth on my v1....or perhaps koolance comp fit sometimes does have a slightly different diameter :shrug:
Mine are totally interlocked :( If I screw one down, I can't get the other down. Boo :(
Oh well, at least my BP fittings fit (barely) and I don't mind which I use--I prefer the Koolance ones, but have the BPs here for when the Koolances are too big for a block :p:
EDIT, I'd put the 'blame' on the D-Tek tops...the fact that my BP fittings are still grinding together when I fasten makes me think that my D-Tek has a smaller spacing than the blocks of others.
Vapor, do you have any means to accurately measure the nut diameter on the Koolance? They should be 20mm O.D., if they're bigger, I'd suspect they're 3/8" x 5/8".
I have 8 in use elsewhere in my test loop already (actually the two I tried to put on my D-Tek, since I still have two in the plastic). (so I doubt any are 5/8, or else I'm boned, haha0
All at or just under 20mm.
Measured a spare BP 3/8(1/2) I have here and it's definitely larger at the base (21mm)....sigh....I have no clue why mine weren't working. When I disassemble tomorrow I'll investigate further, maybe I was being too hasty or maybe the natural curvature of the tubing was forcing them toward each other. :shrug:
I'd really like to be able to keep my fittings consistent through my testing and getting the Koolance fittings to work on the D-Tek would be sweet...esp since they don't have the same ID :cool:
Hmm, OK thanks. If they don't fit "upon further review", I'd have to guess it's down to D-Tek injection molding then, not sure why that would be the case though. :shrug: I have 2 more v1's and a v2, I'll test mine on in that case when I get some time.Quote:
Originally Posted by Vapor
here's my V1...pretty tight but it work..
http://i10.photobucket.com/albums/a1...V1koolance.jpg
and here is a few stuff that works with Koolance Compression Fitting 3/8 ID 1/2 OD
MCW 60 ....fit !
http://i10.photobucket.com/albums/a1...lanceMCW60.jpg
Enzotech SCW REV.A ....fit !
http://i10.photobucket.com/albums/a1...chkoolance.jpg
sorry about the dark pics, sniipe...but i guess people can get the picture :)
EK Mosfets Asus 3a - Koolance Compressions 3/8 (1/2) = Fits nicely
EK NB/SB 5 - Koolance Compressions 3/8 (1/2) = they are close, but still work
EK Fullcover GPU for 9800 GTX - Koolance Compressions 3/8 (1/2) = fits nicely
It seems the updates are coming few and far between, I have to go now and I have a lot of work over the coming few days, if anyone else feels they would like to contribute drop me a PM, the excel spreadsheet and the exported image that is loaded in the first post are both hosted on an FTP server, so far Sniipe Dogg and I have been updating it but as I've become less active I'm sure Sniipe dogg won't mind if someone else contributes too :)
yes indeed, update away.Quote:
Originally Posted by Bobly
my second semester here at school is proving more taxing time-wise than I expected, especially because I have been spending more time than usual with my girlfriend ;).
OK, here's my little update on what I've found out with my FuZions.
My second v2, same as the first one...every thing's perfect. :up:
The v1's were a little different story. I have 1 that is going to be tricky if I use Koolance 3/8 x 1/2 on it and the other one I'm going to have to rule out the use completely. I had some serious touching on the second one I mentioned which I think could be a big problem. Don't get me wrong, the fittings fit both blocks but in reality, this test was just the block and fittings outside a case and without tubing. Throw in those variables and I'm under the impression that I'd wind up throwing something at a wall after a few tries. ;)
HeatKiller LT:
BP 1/2" ID 3/4" OD - No
Koolance 1/2" ID 3/4" OD - No
Koolance 3/8" ID 1/2" OD - Yes
EK LT:
BP 1/2" ID 3/4" OD - Yes
Koolance 1/2" ID 3/4" OD - Yes
Koolance 3/8" ID 1/2" OD - Yes
Koolance CPU-350:
BP 1/2" ID 3/4" OD - Yes (centers touch)
Koolance 1/2" ID 3/4" OD - Yes
Koolance 3/8" ID 1/2" OD - Yes
Koolance CPU-345:
BP 1/2" ID 3/4" OD - Yes (centers touch)
Koolance 1/2" ID 3/4" OD - Yes
Koolance 3/8" ID 1/2" OD - Yes
XSPC Delta V3:
BP 1/2" ID 3/4" OD - Yes
Koolance 1/2" ID 3/4" OD - Yes
Koolance 3/8" ID 1/2" OD - Yes
Thanks for the info skinnee, will BP 7/16 work with the HK LT?
:up:Quote:
Originally Posted by pphx459
I doubt it, the Koolance 3/8" ID 1/2" OD barely fit on the HK LT. There was enough to fit a credit card in between and thats about it.
Said this on the last thread but got ignored. BP full sized will fit if you attach rotaries 45's to both of them.
Yes, that can be said for every block. The question is what natively fits compressions and which size/manufacturer. So every block I get my hands on, I check with the 3 sets of compressions I have.Quote:
Originally Posted by DeathWalking
Has anyone tried heatkiller rev3.0 with feser or bitspower 3/8" ID 1/2" OD?
Feser 1/2in (3/4) 45 degree angled compression fittings fit on the D-tek Fuzion v2, Watercool Heatkiller GPU-X2 full cover gpu block (with some persuasion!) and Swiftech MCW-NBMAX North Bridge block.
http://img186.imageshack.us/img186/8382/fes1.th.jpg
http://img98.imageshack.us/img98/6421/fes2.th.jpg
Primochill Ghost 3/8" x 5/8" don't fit on the Heatkiller 3.0.
I just personally verified, Bitspower 7/16ID compression fittings just barely do NOT fit on the HK3.0 LT.
Feser 3/8" ID 1/2" OD fits perfectly to Heatkiller rev3.0.
I need to update the cart... ugh - when my laptop battery gets replaced I will sit down and do it, but currently that is my only comp with excel :\
send me the sheet...I can knock it down. I think I do the most updates anyhow. :p:
What about Feser 3/8" ID 5/8" + HK 3.0
Not sure about the fesers, but the bitspower ones don't fit. I think 3/8-1/2 are going to be the max for this one.Quote:
Originally Posted by SwIeRsZcZ
Watercool HK LC + 13/10mm (10x1,5mm) screw-on fitting outer thread 1/4
http://i448.photobucket.com/albums/q...e/pure2018.jpg
:up:
Where's the sheet update?
I can confirm:
Heatkiller 3.0 - BP 3/8-1/2 fits
Swiftech NB max- BP 3/8-1/2 fits
Dtek FuZion rev1- BP 3/8-1/2 does not fit! does fit with 45º angled adapter
EK NB max- BP 3/8-1/2 fits
EK Asus 1 NB/SB block- BP 3/8-1/2 fits
EK Supreme LT - Any compressions fit.
Ybris Black Sun:
BP 1/2" ID 3/4" OD - No
Koolance 1/2" ID 3/4" OD - Yes
Koolance 3/8" ID 1/2" OD - Yes
Does anyone know if these TFC compression fittings fit the HK 3 LT 775 with this tubing? Maybe one of these could make it work.
Heatkiller 3.0 - Bitspower 7/16ID, 5/8OD Matte Black Compression Fittings
Are these two compatible?
Would it work without the need of a rotary adapter?
If not, would it work with one compression and one of these + a compression?
I read somewhere that it didn't work with earlier heatkiller 3.0s but that watercool did a small modification and widened the spacing a tad earlier this year, can anyone confirm this?
Has this been updated recently? This could be a lot of help for a new build.
that tubing (6mm thick) will probably fit in the 45 rotary but not in the simple compression fitting you linked first, which needs approximately 3mm thick thubingQuote:
Originally Posted by zippit
you can use both fittings for the 775 hk3.0 lt but i would avoid as many rotary's as possible
Absolutely not.Quote:
Originally Posted by zippit
If you have 3/8" x 1/2" fittings, you will need 3/8"(10mm) x 1/2"(13mm) tubing to match them. With compressions, the size of the tubing must match the size of the fittings.
Nope, they won't fit, unless BP made a small modification to their compression fittings, which I doubt.Quote:
Originally Posted by WeeMaan
I have both the HK3.0 (older and newer revision) and I had to use a 45° rotary adapter (same as you kinked to) for it to fit.
this thread is a huge live saver, be sure to look here when upgrading blocks etc