I got the board few days ago and I did a little mod. ...
The QPI can fly up quite high now, I will try to investigate deeper into it to see if I can get it higher before I will finally post up my conclusions together with the mod. guide. :)
http://valid.canardpc.com/show_oc.php?id=473235
http://valid.canardpc.com/cache/screenshot/473235.png
I managed to do 220 BCLK but the 450W PSU was just too weak to support the core i7 CPU,
all the cables went very hot as if they were going to melt!
Right now I am waiting a 1000W PSU to arrive and replace this old stuff... don't want my CPU to get burnt...
ES shouldn't have any warranty...
I feel sad to have started this thread...
do u have any pics, and what mod did u do
I don't want to post misleading information, or a wrong guide, before I confirmed by myself that it works.Quote:
Originally Posted by zanzabar
please understand my concern...
what kind of mod was it, and any pics of the board
show us some pics of the board, thanks.
I took some, will upload them later.Quote:
Originally Posted by GAR
Have to go now...
220MHz QPI success... still, I am waiting for the new PSU to come before trying to clock higher...
http://valid.canardpc.com/show_oc.php?id=473937
http://valid.canardpc.com/cache/screenshot/473937.png
thank you.
somewhere around the northbridge, thanksQuote:
Originally Posted by zanzabar
how about an overview of the board, we need some pics comeon
The slots, 3-Way SLI capable @ x16-8-8, good spacing
http://i369.photobucket.com/albums/o...re/X58i002.jpg
The PCIe chips for turning x16 to x8?? (P)
http://i369.photobucket.com/albums/o...re/X58i003.jpg
The Clockgen chip, I don't know what is it... IDT xxxxxxxxx
http://i369.photobucket.com/albums/o...re/X58i004.jpg
One of the ICs for overclocking?? The CPU power IC I found is Intersil 6336, I don't know is it good or not but somebody here should do.
http://i369.photobucket.com/albums/o...re/X58i006.jpg
6 RAM slots, not 3, not 4, sorry for my bad picture...
http://i369.photobucket.com/albums/o...re/X58i007.jpg
Lovely Power On and Reset buttons, 2 BIOS chips
http://i369.photobucket.com/albums/o...re/X58i008.jpg
SATA and IDE ports, my camera's problem, not the board bended
http://i369.photobucket.com/albums/o...re/X58i009.jpg
The I/O Panel, all I need are there...actually...more than I need...
http://i369.photobucket.com/albums/o...re/X58i011.jpg
Two Gigabit LANs, Marvell, I love it
http://i369.photobucket.com/albums/o...re/X58i012.jpg
The Audio chip, hope they will further upgrade it soon, 888 is ok but I know there is something better
http://i369.photobucket.com/albums/o...re/X58i013.jpg
nvidia designed the board i am guessing, foxconn made it, and is being distributed by XFX.
I found the information from Intersil!
The ISL6336, ISL6336A is compliant with Intel’s VR11.1 specification. Features include a pin (IMON) for current monitoring and a Power State Indicator (PSI#) input pin to initiate a proprietary phase dropping and diode emulation scheme for higher efficiency at light load by dropping to 1- or 2-phase operation with optional diode emulation (ISL6336) to reduce switching and core losses in the converter. After the PSI# signal is de-asserted, the dropped phase(s) are added back to sustain heavy load transient and efficiency.
actually i think that its a dfi design like what evga has been doing with there digitals. it looks just like the DK from the SB up then some stuff moved on the bottom and esataQuote:
Originally Posted by GAR
http://www.xtremesystems.org/forums/...d.php?t=212712
and its got the mini bios blocks that foxconn loves
This will upset some cross border peeps, XFX is dirt in my house, for more than this thread would allow me to spam it [!]
oh sooo much backup is available...
show some full shots of the board
did you buy it somewhere or is it a testing board from them ?
You made me feel really embarrassed.Quote:
Originally Posted by dinos22
I didn't take full shot because I knew I would take very bad picture...
very very bad... damn it...
http://i369.photobucket.com/albums/o...re/X58i015.jpg
actually designing this board is horrible:down::down::down::down:
I am not an expert so I won't comment about the design.Quote:
Originally Posted by Solid Snake
So far I am satisfied with the board.
Do you mean the position of the floppy port?Quote:
Originally Posted by Solid Snake
If yes I agree with you then.
Because other parts are just so similar that I can't tell the differences.
http://media.bestofmicro.com/B/M/165...x58_layout.jpg
http://media.bestofmicro.com/,B-N-165011-3.jpg
I just noticed that the eSATA of EVGA's needs a cable, XFX's eSATAs don't need.
EVGA's got 2 more USB at the back while XFX's got one more eSATA and they don't require a cable to work.
Update, the new PSU arrived,
and I am ok to overclock now
http://valid.canardpc.com/show_oc.php?id=477474
http://valid.canardpc.com/cache/screenshot/477474.png
I can't say the compatibility is not good now after a crazy trial just for fun
http://i369.photobucket.com/albums/o...re/X58i016.jpg
Kingston x GEIL x OCZ :D
higher BCLK x lower CPU multi.
http://valid.canardpc.com/show_oc.php?id=477524
http://valid.canardpc.com/cache/screenshot/477524.png
x20/x36/x8/x16 4GHz no problem :D
http://i369.photobucket.com/albums/o...x36_x8_x16.jpg
Forgot to mention it was running at CL8-8-8 above.
Ready to break 10s Pi :D 3,999MHz
http://i369.photobucket.com/albums/o...re_1275vtt.jpg
looks ok to me
i like green and black look
those PCI slots stand out like dogs balls on both evga and XFX boards heheh
Sorry, haven't seen anything special here.
I managed to pull 217Blck on my Asus P6T Deluxe with just Watercooling:
http://img266.imageshack.us/img266/2...4531mhzdo5.jpg
Here is the Validation link:
http://valid.canardpc.com/show_oc.php?id=476622
That is a very nice 920 OC. What temps did you have? everything looks top draw, however with those setting I'm calculating 350w and temps 48C or so above ambient. You were able to get the 1333 memory to 1733 with just relaxing the clocks? Did you raise the voltage? Was this Prime95 stable?
What kinda wattage can the PWM handle? Also how many phases?
Yahh, that is a nice sets of clocks for a shabby retail i920 :DQuote:
Originally Posted by DavidNJ
That wasn't prime stable but I managed to pull about 3 Super 1M runs, as I was eagerly trying to brake the 9.000s barrier untill it crashed on me :mad:
But I manged to pull a steady run at 215x21.
Ran SuperPi 1m/8m/32m with the memory running at x8 multi resulting in DRAM 1720Mhz with timings running 8-8-8 18 1T, at 1.64 Dram voltage :yepp:
Those OCZ surpassed my expectations without a doubt, I just can't wait to see what they will do with 2v :)
They low timings of 7-7-7-18 1T run out at about 1650Mhz, again, at stock voltage, 1.64v.
If I want to go Above ~1700Mhz I relax the timings a bit to 8-8-8-18 1T or even 8-8-7-18 1T @ 1.64v.
BTW, here is a SS:
http://img91.imageshack.us/img91/499...988sxm2.th.jpg
"JUST" watercooling?Quote:
Originally Posted by The-Fox
I am under air......:(
hi vapour
clocking bus is no big deal
every board can do that on air as well
show us efficiency of the board
or really high loads with suzero cooling and lots of volts, show us some killer RAM OCs, timings, frequencies..etc
something that would excite XS members a lot more than trying to take a screen of 215/220 bckl heh :up:
I am not an expert,Quote:
Originally Posted by dinos22
I don't have the equipments you mentioned...
maybe you give it a try, I send you the board :D
well the nvidia SLI board of X58 looks like some kind of low-end mobo:down::down::down::down::down: the NB heatsink should've been like the 790i ultra, those are called sexy:eek:
but good work on OC :D
agree with you :DQuote:
Originally Posted by lkiller123
the oc is simple
I only adjusted the vcore to 1.4375v, vdimm to 1.65v and vtt to 1.275v,
that's all I've touched for oc to 215*19.
I am happy with my results done by a board much cheaper than yours. :)Quote:
Originally Posted by The-Fox
Thank you for your comments. :)
Yahh, your results are actually very good considering it is kind of a "budget" board (no offense here).
Air/Water is not really a difference when running 1 instance of SuperPi,
It differs when you run 8 threads if SuperPi or a Multi threaded app like 3DMARK or wPrime.
Not really, when I oc to 4.2GHz with this cooler, the idle temp. goes over 60C already. It can't stay long.Quote:
Originally Posted by The-Fox
lets make the SOB squeal for mercy :rofl:Quote:
Originally Posted by VapourWare
Dinos: we got a saying in my country: "god gives nuts to those who are teeth less" LOL.
I don't understand...sorry... :(Quote:
Originally Posted by dinos22
I was not kidding... I am serious. :(Quote:
Originally Posted by The-Fox
just noticed that your HT is OFF,Quote:
Originally Posted by The-Fox
I will try to disable it,
but don't expect anything too high by air cooling...
too hot to go higher with air-cooling... I tried my bests...
http://i369.photobucket.com/albums/o...rWare/4190.jpg
http://valid.canardpc.com/show_oc.php?id=480477
http://valid.canardpc.com/cache/screenshot/480477.png
almost the highest I could get on air...
http://i369.photobucket.com/albums/o...rWare/4315.jpg
What mod did you use to do the overclocking here Vapour? I need specifics, I just got the board and as of yet have been unable to do any overclocking.