-
BCLK 233 on DFI LP UT X58-T3eH8....
-
wow.. please share voltages - i have a template you can use at http://i4memory.com/f80/dfi-lp-ut-x5...emplate-12919/
-
nice achievements! congrats! :up:
-
-
Very nice results. One thing though....did you try this CPU on other MB's and it couldn't hit the same BCLK?
-
:clap::clap: nice Bclk man ;)
-
nice, good to see the 222mhz wall can be broken. :)
seems the key to higher bclck is qpi voltage, just noticed that 232mhz needs 1,63V...
-
-
-
1 Attachment(s)
What voltages? here is my 226bclk Vanatge run with a Rampage II
http://valid.canardpc.com/show_oc.php?id=467154
226 bclk
-
Great Job Mr HAZZAN :up::up:
-
Quote:
Originally Posted by
Bootsy
What voltages? here is my 226bclk Vanatge run with a Rampage II
[url]http://valid.canardpc.com/show_oc.php?id=467154/url]
226 bclk
If you look at the pics you can know. ;)
-
unfortunately not all voltages from bios shown in SG heh
-
Nice Results :clap:
Waiting for Hazzan @ LN2 ;)
-
Congrats Pakdhe Hazzan :up: :up; :up:
-
nice work man :cool:
go Ln2 !!!!
-
Great run 232MHz max Pakdhe :up:
Is that WR BCLK??? :confused::confused:
-
GREAT clocking Hazzan.. now i cant wait to get this board from germany ggggrrrrrr waiting sucks lol
-
The bClk is limited by the QPI, so this is a CPU capability and not Motherboard.
The DFI mobo is nice but its not what gives you high bCLK.
You can probably reproduce same bclk with other boards as well.
-
great Job Hazzan ;)
Evil that you spent 2 days getting there :D
Keepit up man :D
Question is if it is cpu or board :D
Either way it is good news :D
-
nice job
nice job.
Fyi, hazzan also have ASUS X58. But he said, he can not reach with Asus, still trying how to do. Pls share if done, hazzan!
-
Excellent work!
Might just ditch this Rampage2Crap on ebay and pick up one of these!
-
It looks like I have to order right away ... been waiting for someone to get this board ... :up:
-
Nice clocking, Hazzan!
Fantastic results.
-
Quote:
Originally Posted by
Slovnaft
Excellent work!
Might just ditch this Rampage2Crap on ebay and pick up one of these!
I have to agree. When will this board be available in the States?
-
Really heavy clocking, man! :up:
I guess this is a cpu bonus and does not directly depend on the board's capabilities (leaving out that ASUS crap ;) ^^ j/k).
-
Great bclk Hazzan :clap:
I think you will run better with subzero cooling cpu:D
-
hopefully Hazzan posts his bios settings for us :D
-
Quote:
Originally Posted by
tripgood
I have to agree. When will this board be available in the States?
I ordered mine from the 'Egg last night for $299.99!! :up:
-
thanks All Guys......:):):):)
I dont have any special setting on bios:):):) think maybe I just lucky...this my setting :
Quote:
DRAM Timing
Memory Control Setting: AUTO
Memory LowGap: 1024
DRAM Command Rate: AUTO/1N/2N : 1N
CAS Latency Time (tCL): 8
RAS# to CAS# Delay (tRCD): 8
RAS# Precharge (tRP): 8
Precharge Delay (tRAS): 18
REF to ACT Delay (tRFC): AUTO
Write to PRE Delay (tWR): AUTO
Rank Write to Read (tWTR): AUTO
ACT to ACT Delay (tRRD): AUTO
Row Cycle Time (tRC): AUTO
Read CAS# Precharge (tRTP): AUTO
Four ACT WIN Time (tFAW): AUTO
Voltage Setting
O.C. Shut Down Free: Disable O.C.S.D.F
CPU VID Control: 1.4250=================with my Processor
CPU VID Special Add Limit: Enabled
CPU VID Special Add: Auto
Vcore Droop Control: Enabled
DRAM Bus Voltage: 1.78 =============== with my Memory
DRAM PWM Switch Frequency: Reduction 15%
DRAM PWM Phase Control: 2 Phase Operation
CPU VTT Special Add: AUTO
CPU VTT Voltage: 1.55 Volt
VTT PWM Switch Frequency: Reduction 15%
VTT PWM Phase Control: 2 Phase Operation
CPU PLL Voltage: 1.80v
IOH/ICH 1.1V Voltage: 1.21v
IOH Analog Voltage: 1.20v
ICH 1.5 Voltage: 1.7v
ICH 1.05V Voltage: 1.05v
DIMM 1/2 DQ/DQSTB Bus VREF: -00.0%
DIMM 3/4 DQ/DQSTB Bus VREF: -00.0%
DIMM 5/6 DQ/DQSTB Bus VREF: -00.0%
ADDR/CMD VREF Control: Disabled
x DIMM 1/2 ADDR/CMD Bus VREF: 110
x DIMM 3/4 ADDR/CMD Bus VREF: 110
x DIMM 5/6 ADDR/CMD Bus VREF: 110
CPU QPI Drive Strength: Normal
IOH QPI Drive Strength: Normal
Exit Setup Shut down: Mode 2
O.C. Fail Retry Counter: Enabled
O.C. Fail CMOS Reload: Disabled
PPM Function: Disable
Turbo Mode Function: Disabled
1 core Max Turbo Ratio: 26x
2 core Max Turbo Ratio: 25x
3 core Max Turbo Ratio: 25x
4 core Max Turbo Ratio: 25x
CPU Non-Turbo Clock Ratio: 18x
* BCLK/UCLK/QPI Controller Settings *
QPI Control Settings: Enabled
QPI Link Fast Mode: Enabled
QPI Frequency: 4.8GT
CPU Base Clock (BCLK): 223 Mhz
Boot Up CPU Base Clock: AUTO
PCIE Clock: 103 Mhz
DRAM Frequency: 1067Mhz
UnCore Frequency: 1600
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
I will start with BCLK 223 from bios and raise with higher BCLK ...if have some BSOD raise your CPU VTT/QPI Voltage.... step by step..better running with SPI every time you raise BCLK on OS...that my point..:):)
@eva2000 : George..... thanks for your template :)
-
Thanks Hazzan, the only things I haven't tried much of are
IOH/ICH 1.1V Voltage: 1.21v
IOH Analog Voltage: 1.20v
ICH 1.5 Voltage: 1.7v
PCIE Clock: 103 Mhz
and pushing uncore frequency above 2x dram frequency
so will test and see :D
-
-
Keep up the good work ... I want to see some fantastic clocks ... better than ASUS R.E. II ... :rofl:
-
Thanks all my freind ........:):):)
Quote:
Originally Posted by
Bootsy
Nice.... but you can get BCLK on 226 with NB Frek 3600 .......mine BCLk 227 with NB frek 4100 :D:D .......any way nice you BCLK you get there....:up::up:
