New DDR2 Dual Channel World Record 829.7Mhz

Hey!

Had an epic bench session at a 600 man lanning Set fsb'ing my OCZ Flex to glory!

On the Gigabyte EP45- UD3R
This Gigabyte board is exceptionally well with ram clocking. they dont say DDR2 1333+ for nothing :D... solid clean volt feed to the ram and kept it very stable.
3.04V (was the max)

psu: Gigabyte Odin 1200W
Motherboard: Gigabyte EP45-UD3R
Ram: OCZ Flex 1150mhz 2x1gb
VGA: Msi 9600GT 512

Ram is stil fine! (round 2 after board vmodded)
How did i cool it?
LN2 -100 to -178 (no coldbug on ram)
i insulated around the mems and creating a cup holder like thing (flex heatsink is thick, holds the cold), so i was pouring directly onto the ram.

1659mhz Dual channel DDR2 :up:

http://img401.imageshack.us/img401/5121/wootzo9.jpg

http://valid.x86-secret.com/show_oc.php?id=449952

Submitted this one for that Giga comp! hopefully i can get atleast 3rd :P!


http://img70.imageshack.us/img70/1698/40182661nz2.jpg
http://img125.imageshack.us/img125/1753/32196509jh9.jpg

OMG thats awesome :up::shocked:

:clap::clap: oooooo man that's crazy fast ddr2 !!!
my flex 9200 wont come close to that .......yet
looks like your do some winning :D grats!!

nice going:up:
hope you get first place gl

wow that's really sick :eek: your chances in the competition are real good I think :D

Awesome mobo and ram, congrats :clap:

What model of your ram chips ?

I hope so 2 SoF. But pt1t got some sick rams himself. + he is french Oh NO!

eugh, just dashed my hopes. I'm having trouble getting a 750 validate....sigh

bravo!

awesome work. if you can't find rampots, this is the next best thing haha

Woow awesome job m8, congratz!

not sure if this is WR

any benchs??? congrats men , for u there is no need for DDR3 update

Quote:

---

Originally Posted by Vivi2

I hope so 2 SoF. But pt1t got some sick rams himself. + he is french Oh NO!

---

Be careful, he's belgian, not French :D

Really amazing. I like your setup :p:

Will you try to get the WR of all DDR2 in single ? Or perhaps you already tried and failed...for the moment ;)

OMG !!! Really sick result... Congrats !

Excellent work Vivi2, amazing result :up:

Quote:

---

Originally Posted by proxis

not sure if this is WR

---

huh? This result is even better than the old single channel world record.......

Quote:

---

Originally Posted by CryptiK

Excellent work Vivi2, amazing result :up:



huh? This result is even better than the old single channel world record.......

---

The WR on C5 single is 836.9Mhz ;)

Really I must have an old link. Who has the single channel WR? Got a link to it?

EDIT - found it

http://valid.x86-secret.com/show_oc.php?id=314560

Yep, under SS ;)

wow your dual channel was only a few mhz off from the single mode. congrats!

Very Cool, Congrats!!!

I have not yet tried the sinlgle chan wr :P, i will do that next time, because the insolation was frozen and could not remove 1 stick.

Dedal the chips are D9GMH

thanks guys!

yea rampots would be cool :D

Sick LN2 set up on the ram! :up:

great job there m8 :clap:

now just let me see someone get that on a board 1:1 :shocked: :ROTF: - I jest (but would love to see it)

that really is stellar :up:

I like my old P35 DS4 board as it also overclocks D9 ram exceptionally easy and well I think but this UD3R board seems even more crazy in RAM clocking. Nice result!

Very nice, good job.

thank you guys i respect your comments :)

Damn those clocks are crazy:shocked:Congrats on the WR:up:

Wow ! :eek: I wonder what this kit could do on 444 or 555 ... But first o/c it on single channel ;)

Now THAT is Some SICK Dual-Channel Clock !! Keep pushing It Bro !!!
The Gigabyte contest will be yours for sure, that's damn HARD to beat...

omfg wtf
lets see some super pi runs
Any luck loosening up timings to get the frequency up?

Congrats again Goddy :clap: Crazy ram clocks! :D

ouch , 4mhz to go :)

DDR2-1696MHz CL5.5.5.15

http://img242.imageshack.us/img242/4927/1696mm6.jpg

OMG !! Hicookie you just broke Dual Channel DDR2 WR... Congratulation !!! Btw what cooling on those rams ?

Quote:

---

Originally Posted by Benny Lodewijk

OMG !! Hicookie you just broke Dual Channel DDR2 WR... Congratulation !!! Btw what cooling on those rams ?

---

LN2 -30c

OMG so close anyway awesome :up::shocked::clap:

What sticks?

BTW -30c for LN2 isn't that a bit hot?

Nice work hicookie, congrats on the WR :up:

Quote:

---

Originally Posted by Vivi2

Dedal the chips are D9GMH

thanks guys!

---

OCZ still makes d9's? and they go in the flex series?

Flexes have been sweet surprises sometimes :)

dammit hicookie thunder stealer :D

WELLDONE that is a SICKKKKKKKKK REsult!!!!!!!


damn only have a 800mhz 512k PI result, i probly would have gotten 800mhz pI 1m but cpu speel is low so it takes too long :(

PS: im coming for you hicookie :)

congrats, awesome work

keep pushing it

i will i will :)

that rocks buddy.................awesome result:up::up:

Quote:

---

Originally Posted by WhiteFireDragon

OCZ still makes d9's? and they go in the flex series?

---

Has to be an older kit, OCZ hasn't used D9 since December 2007.

very old kit yes :)

Quote:

---

Originally Posted by hicookie

ouch , 4mhz to go :)

DDR2-1696MHz CL5.5.5.15

http://img242.imageshack.us/img242/4927/1696mm6.jpg

---

OMG :shocked:

Now, that's a sick race to 850MHz ! :eek: That's amazing guys, grats to both of you :up:

do you think this board performs better than my p35 ds3
Yesterday i hit 778mhz on it ... but there are only 2,5 volt possible real may 2,6

UD3P is for sure 100% better than your ds3 ;) And not only as far as ram o/cing is concerned, we 're talking overall here ;)

rofl hicookie
those Team sticks are on fire :p:

OMFG
Very high frequency ,hard to break this amazing WR . :clap:

hicookie kit is a from a present from god :D

here is my new kit :) http://valid.x86-secret.com/show_oc.php?id=451052 i'm waiting for ud3p may i can push it :D

how high was the voltage hicookie ?

Quote:

---

Originally Posted by teurorist

hicookie kit is a from a present from god :D

here is my new kit :) http://valid.x86-secret.com/show_oc.php?id=451052 i'm waiting for ud3p may i can push it :D

how high was the voltage hicookie ?

---

3:5 is wrong 2:3 in reality . Check with 1.45 Cpu-z ;)

Quote:

---

Originally Posted by redratamd

3:5 is wrong 2:3 in reality . Check with 1.45 Cpu-z ;)

---

it´s a P35-board so it should be correct ;)

OMG :shocked: :shocked:
That's very and very nice :up: :up:

Quote:

---

Originally Posted by klEb

it´s a P35-board so it should be correct ;)

---

nope it isnt
it's still bugged

Quote:

---

Originally Posted by hicookie

ouch , 4mhz to go :)

DDR2-1696MHz CL5.5.5.15

http://img242.imageshack.us/img242/4927/1696mm6.jpg

---

It's amazing!:)
Why you didn't submit your score here:
http://ddr2-1508.gigabyte.com.tw/
?
What Team Group memory kit do you use?
PC-6400 - 4-4-4-10, 3-3-3-8 timing?
PC-8000-8500 - 5-5-5-15 or
PC-9600-10400?

Quote:

---

Originally Posted by redratamd

3:5 is wrong 2:3 in reality . Check with 1.45 Cpu-z ;)

---

i checkt 1.45 nothing changed but i also test a *3,20 and you are right ... :mad::mad::mad::mad::mad::mad::mad:

Great results. These new UD3 boards are really exceptional, especially for the price.
Can anyone point out the vDIMM read point on this board?

Great Results.

Fastastic Flex.

:clap:

Wow, that is simply amazing!!!

Sexy numbers. COngrats!!

Freakin A man...that's crazy!! Congrats!

Midget Mariachi http://www.image-jump.com/img/5cce8d...3962fb669f.gif

very VERY nice :up:

More Pics.

:up:

hi guys im new here, and i don't know much about overclocking etc but wot does ram overclocking do? Since this topic is about ram overclocking (i think), wot happens, does the ram perform better or go faster or something?

Quote:

---

Originally Posted by shadowz1337

hi guys im new here, and i don't know much about overclocking etc but wot does ram overclocking do? Since this topic is about ram overclocking (i think), wot happens, does the ram perform better or go faster or something?

---

overclocking is overrated, the only reason 99% of us do it is to help keep warm in the winter. More volts means more heat:yepp:

umm wot...? i don't understand......seriously, wot benefit do u get if u overclock the ram to 829.7mhz like posted in this topic? Does it go faster etc?

Quote:

---

Originally Posted by shadowz1337

umm wot...? i don't understand......seriously, wot benefit do u get if u overclock the ram to 829.7mhz like posted in this topic? Does it go faster etc?

---

SHORT Answer
Dig man, higher memory speed(without adding too much extra latency) gives you more memory bandwidth which gives the CPU more bandwidth TO and FROM the memory. This gives better performance in certain ways which require A LONG Answer or another thread.
Welcome to XS:welcome:
Inquire Within:yepp: