-
Feser DDC Pump Top Pictures
-
Sorry but that looks dire! :eek:
-
My poor eyes... I need sunglasses.. maybe a welder's mask..
-
lol this one looked like some robotic cyclops bug or something :lol2:
http://i255.photobucket.com/albums/h...s/DSC_1285.jpg
-
-
Needs more shots without the LEDs, with them on the details are lost.
-
yeah, whats the price? if it's more expensive than the xspc top, not a whole lot of people will buy IMO.
-
Quote:
Originally Posted by
IanY
My poor eyes... I need sunglasses.. maybe a welder's mask..
IM BLINDDDDDDDDDDDDDDDDDDDDDDDDDDDD :cool:
-
Does it not SPEAK VOLUMES about the company Feser ?
-
No option for intake on top and front? They should get one from DD or Koolance to see a good hole configuration. Way better than that of even the XSPC.
-
That is fricken ugly :shakes:
-
Wow, those pictures are horrible for marketing. You can't just shove some led's in a plastic box on a pump and get us to buy it. I want a welder's mask too.
-
Eww... terrible pics for a terrible looking top.
-
what's it made out of? looks kinda like LEGOs. I like LEGOs... but not to cool my PC :/
-
Quote:
Originally Posted by
RealRedRaider
Let it be known, Blingville and it's Chairman, will NOT support the Feser DDC top...:down:
Can i be a board member? I support this decision.
-
Quote:
Originally Posted by
RealRedRaider
All Blingers are welcome in Blingville.......
Sweet... ill need my compression fitting shipment asap.
-
Quote:
Originally Posted by
mcoffey
Ya know, I was just thinking. I could get one of those tops with the LED and put it on top my house to ward off low flying planes. Damn sure looks brite enough in those pics to work.
andyc
I thinking more along the lines of putting a few on the roof of my car and go joy riding.
or use them as exit signs.
or put them in a old school photography room.
or use them as a ground effects kit.
or ... you get the picture :rofl:
-
Any money shots of the interior?
Could care less about the led's, i want to see where the rotor goes lol.
-
Maybe Feser stole all the plane landing track lights and sold under the DDC name... I need a soldering mask now !
-
I must say that is f'ng ugly
-
Quote:
Originally Posted by
Rise
what's it made out of? looks kinda like LEGOs. I like LEGOs... but not to cool my PC :/
someone should get some legos and make a pump top. imagine how easy it would be to break that. :yepp:
-
Quote:
Originally Posted by
bentleya
:shock:
The great Satan has risen! You shall be smitten like the rest.
Seriously though, it might be high flow but that means more than likely it won't perform as well as the top tops (XSPC, Petra's, Alphacool). ;)
-
Oh, watercooled stop lights!!
-
Quote:
Originally Posted by
Xilikon
Oh, watercooled stop lights!!
:rofl::ROTF:
-
best looking and best performing top no doubt!
O_o
-
Quote:
Originally Posted by
disruptfam
O_o
QFT :ROTF:
-
Quote:
Originally Posted by
RickCain
I must say that is f'ng ugly
+1 :down:
-
-
Woha - I don't think I've ever seen so much hate a few dark pictures =/
I had a chat with Mario about this a couple of days ago; Laing have helped in the design of the product, and the flow rate should be the top of the market so I'm guessing they've put an emphasis on this.
Give them a chance to get some decent photos and some testing results out onto the market before you start throwing abuse at it; they are trying to help you improve your systems with a better top :)
-
Well, it's better than dog poo and I recall reading that some guys would be okay with that as long it performed. (But honestly, geez, I agree... not so attractiv in the pics. The 4 LEDs are pretty overwhelming)
-
Quote:
Originally Posted by
mcoffey
Then they need to tone down the bling a little bit then IMO
The LEDs are optional for a reason - not everyone likes them.
:)
-
At least it is so ugly that it might be the hottest :banana::banana::banana::banana: ever in Bizarro world!
-
I wonder, say if you had a dual loop and were stealthing the pumps somewhere (eg. I think a few guys have put pumps in one of the hdd trays on a Cosmos 1000), you'd have quite the cool glow from that 8-LED light show without having to look directly at the mega-glow source. Though nothing that couldn't be done with separate LEDs and would really only be a convenience, so I guess it would again boil down to performance.
-
-
So the whole purpose of all those slits and ridges and what not is to make it blindingly-shiny? No thanks.
-
Still looks like it's made of thin, cheap plastic...
-
Quote:
Originally Posted by
majestik
So the whole purpose of all those slits and ridges and what not is to make it blindingly-shiny? No thanks.
It actually just makes it look cheap and weak :stick: , tops made of milled acrylic solids FTW!
-
Still looks ugly.. only redeeming quality is the mounting system which will allow cooling of the DDC
-
Quote:
Originally Posted by
Akuma2000
I guess these pictures are better :D
Keep guessing! :p:
-
Quote:
Originally Posted by
twwen2
That is fricken ugly :shakes:
Yup
-
the plastic does look really thin and "cheap" but not more so than the DDC base itself. eh.. I still wouldn't buy it :down:
-
Quote:
Originally Posted by
marcus000
Keep guessing! :p:
Well the pictures are better... but the top is still just as ugly as before.
-
WOW time for some replys :p:
Quote:
Originally Posted by
marcus000
Sorry but that looks dire! :eek:
Marcus my friend, :) cant say anything :p:
Quote:
Originally Posted by
IanY
My poor eyes... I need sunglasses.. maybe a welder's mask..
Will get some pictures with no leds :p: but some have been posted on page 3
Quote:
Originally Posted by
SparkyJJO
lol this one looked like some robotic cyclops bug or something :lol2:
ERmmmmm ........ got no answer for this
Quote:
Originally Posted by
Arni
Ugliest top ever
remeber this is pre production model there have got to make few changes :shrug: dunno what yet.
Quote:
Originally Posted by
Ashraf
Ew. I'll pass...
Ashraf i think we shound wait to full release and some testing before saying that :cool:
Quote:
Originally Posted by
mcoffey
TBH, looks very toy like IMO. And even though they are low voltage LEDS, they still create heat and I wouldn't want to use them. And I like shinny things that glow:D I would be interested to see how it performs. Might bring that whole "cat turd" mentality back into play if it performs well. But it would have to be one kickass performer with them looks.
andyc
It is a moulded top not like most which are machined out of a plexi, alu, copper, brass, derlin and any other thing. :up:
Quote:
Originally Posted by
Zaskar
Needs more shots without the LEDs, with them on the details are lost.
:up: some on page 3 but will get my own
Quote:
Originally Posted by
philbrown23
yeah, whats the price? if it's more expensive than the xspc top, not a whole lot of people will buy IMO.
Not sure on price yet as its not been released yet, still in testing and changing mode :)
Quote:
Originally Posted by
NaeKuh
IM BLINDDDDDDDDDDDDDDDDDDDDDDDDDDDD :cool:
:ROTF: DDDDDDDDDDD not sure with leds my self
Quote:
Originally Posted by
IanY
Does it not SPEAK VOLUMES about the company Feser ?
Not sure what you mean :confused::confused:
Quote:
Originally Posted by
mcoffey
yeah,
Evidently they like brite shinny things that glow too:D A little to much I would say, as a matter of fact. I mean I'm all for things looking nice with a little pazazz, but OMG it hurts me to look at that thing.
andyc
andy will see if can get some pics as well with not as many leds in :cool:
Quote:
Originally Posted by
DarthBeavis
No option for intake on top and front? They should get one from DD or Koolance to see a good hole configuration. Way better than that of even the XSPC.
the setup is done purly to get best performnce out of but from a modders view nothing is right :D there cant please everyone :D but i guess there can try
Quote:
Originally Posted by
twwen2
That is fricken ugly :shakes:
Cant comment :)
Quote:
Originally Posted by
BlueAqua
Wow, those pictures are horrible for marketing. You can't just shove some led's in a plastic box on a pump and get us to buy it. I want a welder's mask too.
these where the pictures feser gave me :D will see if you can get discount for a mask tho, but it is a chose if you want to use the leds or not :yepp:
Quote:
Originally Posted by
eXa
Eww... terrible pics for a terrible looking top.
:shakes:
Quote:
Originally Posted by
Rise
what's it made out of? looks kinda like LEGOs. I like LEGOs... but not to cool my PC :/
no lego :( wound be cool, moulded plastic
Quote:
Originally Posted by
lyl
Can i be a board member? I support this decision.
:up::up: up to you
Quote:
Originally Posted by
RealRedRaider
All Blingers are welcome in Blingville.......
you do same some wired things :rofl:
Quote:
Originally Posted by
mcoffey
I don't know dude, I wouldn't be putting down LEGO's like that.:ROTF: LEGO's are much nicer looking IMO.:up:
andyc
sounds like you all like lego like me ermm got some spare lego, lets see if i cound make a pump top :ROTF::ROTF:
Quote:
Originally Posted by
lyl
Sweet... ill need my compression fitting shipment asap.
:D:D glad someone likes it, i'm not sure if you get compression fittings with it like you do with the rad :cool:
Quote:
Originally Posted by
mcoffey
Ya know, I was just thinking. I could get one of those tops with the LED and put it on top my house to ward off low flying planes. Damn sure looks brite enough in those pics to work.
andyc
:ROTF::ROTF::ROTF:
Quote:
Originally Posted by
Rise
I thinking more along the lines of putting a few on the roof of my car and go joy riding.
or use them as exit signs.
or put them in a old school photography room.
or use them as a ground effects kit.
or ... you get the picture :rofl:
:ROTF::ROTF::ROTF::ROTF: Depends on the car :D
Quote:
Originally Posted by
mcoffey
I don't know, now that I think about it more, I'd be afraid to put that thing on top of my house.
I live to close to a Railway Yard. That things so ugly it might make a incoming freight train jump its tracks.
andyc
:ROTF::ROTF::ROTF::ROTF: right :p: lol
-
Quote:
Originally Posted by
_G_
Any money shots of the interior?
Could care less about the led's, i want to see where the rotor goes lol.
Like i said in the reply's above will try to get some more in depth pictures :cool:
Quote:
Originally Posted by
RealRedRaider
The "rotor", it goes in the middle of the LEGO block...:up:
:ROTF::ROTF:
Quote:
Originally Posted by
Xilikon
Maybe Feser stole all the plane landing track lights and sold under the DDC name... I need a soldering mask now !
Germany is not a big place prob why there not many air ports :ROTF:
Quote:
Originally Posted by
RickCain
I must say that is f'ng ugly
No comment
Quote:
Originally Posted by
mcoffey
Oh Lawd yes!
If I had a dog that ugly I'd shave it's ass and make it walk backwards when I took it out.
andyc
i wound defo buy that dog :p: any chance of a release in the uk soon
Quote:
Originally Posted by
roofsniper
someone should get some legos and make a pump top. imagine how easy it would be to break that. :yepp:
said i wound try :p: need a few ddc first
Quote:
Originally Posted by
Waterlogged
:shock:
The great Satan has risen! You shall be smitten like the rest.
Seriously though, it might be high flow but that means more than likely it won't perform as well as the top tops (XSPC, Petra's, Alphacool). ;)
just because it is different don't knock it to the tests :D
Quote:
Originally Posted by
Xilikon
Oh, watercooled stop lights!!
:confused::confused:
Quote:
Originally Posted by
C'DaleRider
:rofl::ROTF:
:rolleyes:
Quote:
Originally Posted by
mcoffey
LMAO:rofl:,
Just get some amber and green LED's and your all set.
andyc
Govements could save thousands and use them as traffic lights
Quote:
Originally Posted by
disruptfam
best looking and best performing top no doubt!
O_o
O_o O_o O_o O_o
Quote:
Originally Posted by
Rise
QFT :ROTF:
love this smily
Quote:
Originally Posted by
holwill
+1 :down:
+1 :up:
Quote:
Originally Posted by
drbhatti
disgusting
No comment
Quote:
Originally Posted by
prosser13
Woha - I don't think I've ever seen so much hate a few dark pictures =/
I had a chat with Mario about this a couple of days ago; Laing have helped in the design of the product, and the flow rate should be the top of the market so I'm guessing they've put an emphasis on this.
Give them a chance to get some decent photos and some testing results out onto the market before you start throwing abuse at it; they are trying to help you improve your systems with a better top :)
thank you bro, james :D well said :)
Quote:
Originally Posted by
TedShred
Well, it's better than dog poo and I recall reading that some guys would be okay with that as long it performed. (But honestly, geez, I agree... not so attractiv in the pics. The 4 LEDs are pretty overwhelming)
:cool: don't use leds then :P its a option
Quote:
Originally Posted by
prosser13
The LEDs are optional for a reason - not everyone likes them.
:)
2 posts in my thread bit of a change for you :D well said again
Quote:
Originally Posted by
mcoffey
Then they need to tone down the bling a little bit then IMO, and only IMO. Why 4 LED holes, give me a break if they're that concerned with performance. Again just my opinon, but there seems to be another agenda with Feser equal too, or greater than their gears performance.
andyc
:cool::rolleyes::cool:
Quote:
Originally Posted by
HaCKs
At least it is so ugly that it might be the hottest :banana::banana::banana::banana: ever in Bizarro world!
me not a fan of banana's :(
Quote:
Originally Posted by
TedShred
I wonder, say if you had a dual loop and were stealthing the pumps somewhere (eg. I think a few guys have put pumps in one of the hdd trays on a Cosmos 1000), you'd have quite the cool glow from that 8-LED light show without having to look directly at the mega-glow source. Though nothing that couldn't be done with separate LEDs and would really only be a convenience, so I guess it would again boil down to performance.
1/2 fat boys with this and a ddc ultra = best pump available so there say :cool:
Quote:
Originally Posted by
Akuma2000
I guess these pictures are better :D
thanks will get my own soon :D
Quote:
Originally Posted by
majestik
So the whole purpose of all those slits and ridges and what not is to make it blindingly-shiny? No thanks.
:D i'm not to sure i fort there where to stop it breaking under pressure :)
Quote:
Originally Posted by
D-Cyph3r
Still looks like it's made of thin, cheap plastic...
moulded plastic :cool:
Quote:
Originally Posted by
Koen
It actually just makes it look cheap and weak :stick: , tops made of milled acrylic solids FTW!
just wait for tests :P you never no there may end up doing that :D
Quote:
Originally Posted by
Bojamijams
Still looks ugly.. only redeeming quality is the mounting system which will allow cooling of the DDC
:p: i do like the mouting system but profer my ones i got designed up here :up:
-
Quote:
Originally Posted by
marcus000
Keep guessing! :p:
not good at guessing like you know :(
Quote:
Originally Posted by
Stealth42o
Yup
no comment
Quote:
Originally Posted by
lennox
the plastic does look really thin and "cheap" but not more so than the DDC base itself. eh.. I still wouldn't buy it :down:
like said few times wait for tests and wait for me to get better photos :D
Quote:
Originally Posted by
eXa
Well the pictures are better... but the top is still just as ugly as before.
:(:(
-
Dear Lord! You answered to ALL posts :eek:
Do you work for Feser? Honestly!
-
yer i went quote mad, i fort i i quote some not fair on others so did the whole lot :D :p: and no i don't work for feser :D i am sponsored by them :D for my modding work :D wound be cool to work for them wound have so many more products out now :p:
-
Good grief!!! LONGEST ANSWERS I'VE EVER SEEN!! THIS MAY GO INTO THE GUINESS BOOK OF RECORDS!
-
This top is quite ugly for sure...
But, I don't really think TFC will produce such a top without some perf'.
In one of my rig, i've got X-changer 360+tube+FeserONe and i'm very happy with that. It just needs a better design... I'm waiting for test results.
BTW look at the XSPC's top: quality is really really bad, plastic suxXx... But it's not a problem just because it roxXxes.
-
Mmm make a solid one out of acrylic or the black stuff...
Looks better IMHO.
Molded means it is cheaper to make than a solid one.
Less material and a no milling machines...
Give one to martin for a test ;)
Then we can say something about performance!
-
More info guys
Price, 19.90 (euros)
Fittings, 2 x feser compression fitting (1/2" version)
Oring, 1 x feser O ring (blue if you get blue leds, green if you get green leds, red if you get red leds and orange if you get orange leds)
LED's, 1 x feser module with 2 LED's (blue if you get blue Oring, green if you get green Oring, red if you get red Oring and orange if you get orange Oring)
NO LED's Pictures, (will also put in OP) (repeat not my photos but uploaded to my pb)
http://i255.photobucket.com/albums/h...ps/top60pz.jpg
http://i255.photobucket.com/albums/h...ps/top33bl.jpg
http://i255.photobucket.com/albums/h...ps/top1crg.jpg
http://i255.photobucket.com/albums/h...s/top171aa.jpg
right heres some more pictues with leds :D again not my pictures but my photobucket thanks bundymania for these :up::up:
http://i255.photobucket.com/albums/h...mg_375644i.jpg
http://i255.photobucket.com/albums/h...mg_374793f.jpg
http://i255.photobucket.com/albums/h...mg_37381qe.jpg
-
Quote:
Originally Posted by
mr-rob
This top is quite ugly for sure...
But, I don't really think TFC will produce such a top without some perf'.
In one of my rig, i've got X-changer 360+tube+FeserONe and i'm very happy with that. It just needs a better design... I'm waiting for test results.
BTW look at the XSPC's top: quality is really really bad, plastic suxXx... But it's not a problem just because it roxXxes.
few people have had nosie issue with xspc top so there not perfect :up: but best at the moment :) tests will revel which is best :)
Quote:
Originally Posted by
Yozzman
Mmm make a solid one out of acrylic or the black stuff...
Looks better IMHO.
Molded means it is cheaper to make than a solid one.
Less material and a no milling machines...
Give one to martin for a test ;)
Then we can say something about performance!
the black stuff is delrin / actel BTW and i'm sure there will be glad to give one to martin to test, just not sure he will test it tho with his retument
-
Against all.....I like it.....
I'll hope to test one in the next weeks.... ;)
-
Quote:
Originally Posted by
bentleya
few people have had nosie issue with xspc top so there not perfect :up: but best at the moment :) tests will revel which is best :)
the black stuff is delrin / actel BTW and i'm sure there will be glad to give one to martin to test, just not sure he will test it tho with his retument
I know that's delrin :P
Yeah, 2bad... But he will finish his CPU roundup tho! :up:
Price is on par with other tops... :(
-
So wait, maybe I missed it, but why is the outlet on this protrusion on the top that hangs over the side of the pump?
-
Quote:
Originally Posted by
SparkyJJO
So wait, maybe I missed it, but why is the outlet on this protrusion on the top that hangs over the side of the pump?
Was wondering that myself. Maybe it's purely visual? Perhaps it helps to ensure the top is properly centered and mounted on the pump?
-
Looks like a jello shot :)
I kind of like it, but personally I like the petra black or xspc top better.
Wonder how it performs though
-
Looks crap but I lose those 5.25" mounts.... *prepares to defend self*
~Bex
-
Quote:
Originally Posted by
vkbms
Against all.....I like it.....
I'll hope to test one in the next weeks.... ;)
NOT AGIANT ALL :D me likes :p: and i hope to, to be testing one very soon :D
Quote:
Originally Posted by
Yozzman
I know that's delrin :P
Yeah, 2bad... But he will finish his CPU roundup tho! :up:
Price is on par with other tops... :(
lol, ok where you say black stuff then :p:, he still needs to see if can get a XSPC Edge V2 and test it against the V1:up:
Quote:
Originally Posted by
SparkyJJO
So wait, maybe I missed it, but why is the outlet on this protrusion on the top that hangs over the side of the pump?
I wound guess that it is something to do with barb getting in the way of inside so if the move it out, better performance maybe :up:
Quote:
Originally Posted by
orclev
Was wondering that myself. Maybe it's purely visual? Perhaps it helps to ensure the top is properly centered and mounted on the pump?
^^^^^^^ :up:
Quote:
Originally Posted by
Eddie3dfx
Looks like a jello shot :)
I kind of like it, but personally I like the petra black or xspc top better.
Wonder how it performs though
Like i have said loads of times in my mad quote sessions above :p: wait to tests to revel which is the best, maybe not best look wise but performance wise maybe :D will see
Quote:
Originally Posted by
mcoffey
Looks like it's some sort of injected molded plastic or something doesn't it? Much better pics now. At least you can get a sense of the design. Be interesting to see how it does.
andyc
yer the first lot an't very nice, but still need a picture of the inside :D
Quote:
Originally Posted by
RCG_Bex
Looks crap but I lose those 5.25" mounts.... *prepares to defend self*
~Bex
elllo BEX :D lose them 5.25" mounts :confused::confused:
-
You don't happen to work for Bentley, Audi or VW do you ? :) Nevertheless, its good taste lol :)
-
no bentley is my 2nd name :D
-
Quote:
Originally Posted by
bentleya
no bentley is my 2nd name :D
All the better! What pedigree lol :)
-
Quote:
Originally Posted by
bentleya
no bentley is my 2nd name :D
If it makes you feel any better, when I was 17, we took my friend's dads bentley over a huge bump and scraped the front end in the ground.
Yeah, needless to say I'm sure he got a lashing for that :rolleyes:
Car was amazing though
-
" a face only a mutha could luv" :shakes:
-
How strong is the top? It looks like it could crack easily..
-
Quote:
Originally Posted by
prosser13
Woha - I don't think I've ever seen so much hate a few dark pictures =/
Cuz its too bright, and looks like the stop light at an intersection.
:rofl:
:cool:
Fesser make a dual top with dual inlets please like this:
http://i125.photobucket.com/albums/p...a/IMG_0950.jpg
Dual Inlet FTW!
-
Quote:
Originally Posted by
IanY
All the better! What pedigree lol :)
not sure what you mean :confused: you asking for my first name?
Quote:
Originally Posted by
Eddie3dfx
If it makes you feel any better, when I was 17, we took my friend's dads bentley over a huge bump and scraped the front end in the ground.
Yeah, needless to say I'm sure he got a lashing for that :rolleyes:
Car was amazing though
what how cound you :(
Quote:
Originally Posted by
RealRedRaider
The name Feser picked for this product, says it all to me, "Reflector"...
Apparently all those crisscrossing braces are to increase reflection..??
IMO, all they increase is a more ugly product.
Not that it matters, but I personally don't care how it performs, they won't get my hard earned $$$...
then why keep posting in here then :spam::lsfight:
Quote:
Originally Posted by
menace2society
" a face only a mutha could luv" :shakes:
what? :rolleyes: just wait to i get some really nice photos :D
Quote:
Originally Posted by
ls206
How strong is the top? It looks like it could crack easily..
not sure, haven't got one yet :D but will do as soon as there avible to buy
Quote:
Originally Posted by
NaeKuh
Cuz its too bright, and looks like the stop light at an intersection.
:rofl:
:cool:
Fesser make a dual top with dual inlets please like this:
Dual Inlet FTW!
:ROTF::ROTF::ROTF::ROTF::ROTF:
feser have got some grest new products for 2009 maybe one of them is that? who nos? no me any way :p:
Quote:
Originally Posted by
RealRedRaider
+1... Dual Inlet Top ........ FTW
more of the spamness :spam: lol
-
All I meant was that its great to have a prestigious name like Bentley.
-
yeppers wound reither be called speedy with no sir name or aero or something really cool :p:
-
Quote:
Originally Posted by
bentleya
yeppers wound reither be called speedy with no sir name or aero or something really cool :P
rofl...
i reminds me of a scene i read on a japanese manga book from bleach.
He was naming his animated stuff animal, and it wanted the name SKY. Ichigo (protagonist) said no, that name is too cool and named it KON instead.
:rofl:
-
All the ridges are to provide mechanical strength. Each side of the mold has deep cavities to create the part thickness. Remember in injection molding uniform wall thickness is king. Then it looks like they glue a couple covers on the top for some reason, probably to keep it from looking like an egg crate and to add branding. The overhang on the outlet is merely to provide enough structure to support the G1/4 tap.
Production costs for something like this should be very low (way less than $5) unless it was extremely low volume. The problems with it I see are depending on the resin, people will crack it screwing in barbs, and it will be difficult to get a uniform flat surface for the o-ring seal due to all the walls. You could probably solve those problems by using polycarbonate and a slightly larger o-ring than stock. It should be much cheaper than anything else available tho.
-
Quote:
Originally Posted by
HaCKs
I am sorry to keep spamming the spamming going, but damn that spam musubi looks GOOD!
spam all you want :p: dosent bother me in my threads :p: me no care :D
Quote:
Originally Posted by
101
All the ridges are to provide mechanical strength. Each side of the mold has deep cavities to create the part thickness. Remember in injection molding uniform wall thickness is king. Then it looks like they glue a couple covers on the top for some reason, probably to keep it from looking like an egg crate and to add branding. The overhang on the outlet is merely to provide enough structure to support the G1/4 tap.
Production costs for something like this should be very low (way less than $5) unless it was extremely low volume. The problems with it I see are depending on the resin, people will crack it screwing in barbs, and it will be difficult to get a uniform flat surface for the o-ring seal due to all the walls. You could probably solve those problems by using polycarbonate and a slightly larger o-ring than stock. It should be much cheaper than anything else available tho.
this man does his stuff :D I'm sure there are doing the right testing so all them problems don't happen :D
-
Quote:
Originally Posted by
Akuma2000
Its grown arms, Grinchville shall soon be under attack from the army of feser DDC tops! Ready your defenses!
-
^^^^ haha :ROTF::ROTF: think it looks like a darlik, :rofl:
EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE
:ROTF::ROTF::ROTF::ROTF::ROTF::ROTF::ROTF::ROTF: ^^^^
for anyone, who dosn't know about DR Who and Darliks heres a you tube vid
http://www.youtube.com/watch?v=c4UJiBmVEMk
-
One thing don't fit on bundy pic
-
Urgh that top looks like a cheap plastic toy. Honestly, whats up with all the "cross beams". Why couldn't they simply mold it into a solid "block". Would be much better.
-
Quote:
Originally Posted by
Arni
One thing don't fit on bundy pic
:confused::confused::confused:
Quote:
Originally Posted by
NysoO
Urgh that top looks like a cheap plastic toy. Honestly, whats up with all the "cross beams". Why couldn't they simply mold it into a solid "block". Would be much better.
answer in the quote below
Quote:
All the ridges are to provide mechanical strength. Each side of the mold has deep cavities to create the part thickness. Remember in injection molding uniform wall thickness is king. Then it looks like they glue a couple covers on the top for some reason, probably to keep it from looking like an egg crate and to add branding. The overhang on the outlet is merely to provide enough structure to support the G1/4 tap.
-
Quote:
Originally Posted by
bentleya
:confused::confused::confused:
answer in the quote below
Well, a solid plexi top would look just as good with some LED's on. And without any lights, no matter what those ridges do, the whole piece looks really cheap.
Oh well, we'll see how it performs.
-
Quote:
Originally Posted by
NysoO
Well, a solid plexi top would look just as good with some LED's on.
yes it might do :) not arguing there
Quote:
Originally Posted by
NysoO
no matter what those ridges do, the whole piece looks really cheap.
with out them ridges my fiend you will have coolant spayed all over you system as the top wound most prolbley just crack under the pressure :(
Quote:
Originally Posted by
NysoO
Oh well, we'll see how it performs.
:D :D just want them to be doing that soon
-
Quote:
All the ridges are to provide mechanical strength. Each side of the mold has deep cavities to create the part thickness. Remember in injection molding uniform wall thickness is king. Then it looks like they glue a couple covers on the top for some reason, probably to keep it from looking like an egg crate and to add branding. The overhang on the outlet is merely to provide enough structure to support the G1/4 tap.
I don't get this...wouldn't solid acrylic be stronger than any kind of fancy ridged egg crate structure? :confused:
How is injection molding better than milling out of a solid block? Is it cheaper? I must say cheaper is not really in line with TFC philosophy...
-
Well if you put it in the right place you would just get the glow effect.
-
Quote:
Originally Posted by
Kibbler
I don't get this...wouldn't solid acrylic be stronger than any kind of fancy ridged egg crate structure? :confused:
MMMMM ....... maybe we should invent a triangle shaped one then it wound be strong :yepp: he he
Quote:
Originally Posted by
Kibbler
How is injection molding better than milling out of a solid block? Is it cheaper? I must say cheaper is not really in line with TFC philosophy...
we don'f no if moulding is no good, no test yet but there will come :D just because feser haven't fowled the trend dosnt mean it is no good :rolleyes:
Quote:
Originally Posted by
USFORCES
Well if you put it in the right place you would just get the glow effect.
to right my friend have it in you hd rack with a window, and your frineds will wonder whats the glow :cool:
its like my dvd open floor switch i modded a switch into my floor to open my dvd drive :) then got my friends round to see it :cool: and before i press down i say open dvd and i press down when i say :D and there think my dvd drive opens by voice :ROTF::ROTF::ROTF::ROTF:
-
I gotta be honest, that second set of pictures that you put up... the pump actually looks pretty good with what appears to be a softer more diffused glow to the tops. I still think that the tops look a bit cheap - I know that they are not because of the various mold flanges and what not but maybe there is some way to smooth that look out a bit? Maybe tone down the flanges some how. I want to know the flow results as well before I make final judgement.
-
-
Quote:
Originally Posted by
Rise
I gotta be honest, that second set of pictures that you put up... the pump actually looks pretty good with what appears to be a softer more diffused glow to the tops. I still think that the tops look a bit cheap - I know that they are not because of the various mold flanges and what not but maybe there is some way to smooth that look out a bit? Maybe tone down the flanges some how. I want to know the flow results as well before I make final judgement.
:cool::cool::cool:
just fort i may share this with you guys, spoke to the feser company around lunch time and there have changed the mould slightly to what you see here :D i will try get some pictures out as soon as i can :D
Quote:
Originally Posted by
71 (Bryan)
wtf is that [confused]
it is a ddc pump top made by the feser company :rolleyes:
-
Quote:
Originally Posted by
bentleya
:confused::confused::confused:
looks like
http://img517.imageshack.us/img517/2...ostow03gm9.jpg
that was cheapest pump 2 years ago in Poland :eek:
Today if i need some stuff i need great looking product not only working fine.
Who cares 0,5 Lpm than cheap and nice looking XSPC.
Feser never was cheap.
