http://en.expreview.com/img/2008/08/16/gainwand.png
more@Expreview:D
Download
Printable View
perfect, does it works with 4870X2?
yes,just tested on my sapphire 4870x2 but why u can only choose between 50-100% ?Quote:
Originally Posted by BobyTT
ATT work with fan, frequency and VGPU now guys
Good idea but unsusable for me since you can't set the fan below 50%, why not?
it gives temps for both cores also right?Quote:
Originally Posted by Keiki
cowie!Quote:
Originally Posted by cowie
Exactly, no need for fancy tool if ATI Tray tools can do everything without useless bling.Quote:
Originally Posted by madcho
I have two questions, does it still let you create your own profile with temperatures and fan speed and does it work in sup com? I could use a little more agressive fan settings in 3d but I still want it to be dynamic settings, and I do not want to sacrifice 2d silence.Quote:
Originally Posted by Kasparz
Ati tray tools did not work with sup com and my old x1950, it corrupted the hud no matter what settings I tried out. I had to switch to ccc to get it to work. I haven't tried it ony my 4870.
you have a link to the new version that works?Quote:
Originally Posted by madcho
Vgpu on RV770 is changeable through software now ? This is the first time i've heard it.
Great find
Thanks :up:
Great tool, does it support just Gainward 4850/4870 cards or it is necessary to flash Gainward bios?
yep , it works here too , with Powercolor HD4870X2Quote:
Originally Posted by Keiki
also minimum fan speed is 50%
regards
Can you set fanspeed for two cards if your using crossfire?
nice one gainward =]
AgreedQuote:
Originally Posted by Jamesrt2004
Finally something nice for 4***
Yea I kinda wish I could choose lower then 50% but hey I am not complaining. ATT doesn't work with hd4870x2 sadly.
about time...:clap:
Great news, I´m trying it right away!
here's the beta 6.4 version from Gainward website
Download
That beta won´t work on 64bit Vista :(
for those who may still have questions, this program does work for non-Gainward cards, but it does not work with CrossFire. i can only adjust my primary card's fanspeed. the bottom video card is unaffected by this program.
6.4 beta works on my vista x64Quote:
Originally Posted by BulldogPO
EDIT: disabling driver signing was not necessary, and it's Vista x64 with SP1
you can edit the file DFC.INI and you can use less than 50%.
the cach is if you make any change (open the program and click save) it will go to 50%.
the solution will be to put the modified DFC.INI in another folder and start the program whit a bat file that first copy the file and then start the program.
I use 35% almost no noise and idle at 55.
Bah, they should update program to allow 20-50% fan speeds.
Exactly. I only have it at 30% most of the time.Quote:
Originally Posted by BulldogPO
sub'd