Pictures needed of installed MCR320 radiator

We intend to release a new kit based on the MCR320 radiator within the next 30~60 days. We are looking for pictures of user installations to include in our packaging and installation guide.

It does not matter if your installation shows a competing water-block btw, what is important to us is to show consummers as many choices as possible in using our triple rad. Internal installation, external installation, use of the radbox, extensive mods, simple mods..

We will reward any picture that ends up being published either on our packaging, installation guide, or web site by a free MCR320 radiator.

*cough* double thread *cough*

http://images23.fotosik.pl/259/302167587c3b05e1med.jpg
http://images23.fotosik.pl/259/302167587c3b05e1.jpg
Without radbox on Lascala 03

Here is mine on one of my test benches. And yes the one fan was backwards but was fixed before being put into operation. :)

Uh, not really your standard mounting..... I can get some more glamorous shots if need be.....

I can get more pics if you like what i have done :)

All I did was use Velcro (FTW) and stuck it to the bottom of my case :) (I'm not a fan of drilling in cases!)

The radiator them started to go forward from the weight of the fans, I then stuck a bit of spare tubing infront to stop it as you can see from the first pic (You could use something else instead of tubing :P eg. Better quality Velcro! "

http://i38.tinypic.com/29xsv2e.jpg
http://i33.tinypic.com/20f9mib.jpg

now thats buck!

Quote:

---

Originally Posted by Cptn Vortex

Uh, not really your standard mounting..... I can get some more glamorous shots if need be.....

---

Thanks

the pic to the left is a good example . can you please send to gabe@swiftech.com with name & address. max file size is 9.9Mb

Will do, I'll send some when I get home from work.

I think gabe is looking for pics that make the rad look very good guys not just standard pics.
Gabe: You should look at milliondollarpc.com and see do any of the guys there have 320's in their setups.

With the way mine is mounted I can't seem to get a good shot of it. Similar setup to Cptn Vortex but the fans are between the rad and the top of the case so it isn't very visible, and from below it is hard to get a shot of it.

I posted this in the other thread of the base LC section, already sent to gabe :D

http://img522.imageshack.us/img522/5624/mcr3205uc9.jpg

funny how your PSU fits, today i gone have one off those too :D

Quote:

---

Originally Posted by NiscoRacing

funny how your PSU fits, today i gone have one off those too :D

---

anyone else? I need more pics ---

Quote:

---

Originally Posted by gabe

anyone else? I need more pics ---

---

If you ever need any MCR220 pics I've got ya! :)

Quote:

---

Originally Posted by Gir92

If you ever need any MCR220 pics I've got ya! :)

---

thanks bu we need MCR320 for a kit packaging..

Quote:

---

Originally Posted by gabe

thanks bu we need MCR320 for a kit packaging..

---

I have some from last year on another machine.
Let me dig them out..

Quote:

---

Originally Posted by gabe

anyone else? I need more pics ---

---

With all of the standard roof mounts, I'll submit my Rocketfish Door Panel fixture mount.

http://s83.photobucket.com/albums/j3...h_IMG_1962.jpg http://s83.photobucket.com/albums/j3...h_IMG_1963.jpg

http://s83.photobucket.com/albums/j3...h_IMG_1970.jpg http://s83.photobucket.com/albums/j3...h_IMG_1974.jpg

Click the images for the full size image. :D

Quote:

---

Originally Posted by NPI

With all of the standard roof mounts, I'll submit my Rocketfish Door Panel fixture mount.

http://s83.photobucket.com/albums/j3...h_IMG_1962.jpg http://s83.photobucket.com/albums/j3...h_IMG_1963.jpg

http://s83.photobucket.com/albums/j3...h_IMG_1970.jpg http://s83.photobucket.com/albums/j3...h_IMG_1974.jpg

Click the images for the full size image. :D

---

Thanks.. any good pics of the finished product ?

Gabe, I can get you a few on a Radbox if you'd like. Something a bit different from the status quo.

Quote:

---

Originally Posted by gabe

Thanks

this is a good candidate. please email original (up to 9.9Mb file size) with name & address to gabe@swiftech.com

---

Hey gabe ive lost the originals, will this be okay?

http://img.photobucket.com/albums/v3...mountsmall.jpg

If so shall i send the original?

And do you want a shot of this too?

http://img.photobucket.com/albums/v3...j/DSCF3333.jpg

Quote:

---

Originally Posted by Burn

Gabe, I can get you a few on a Radbox if you'd like. Something a bit different from the status quo.

---

sure. let me see..

Quote:

---

Originally Posted by taylormsj

Hey gabe ive lost the originals, will this be okay?

http://img.photobucket.com/albums/v3...mountsmall.jpg

If so shall i send the original?

And do you want a shot of this too?

http://img.photobucket.com/albums/v3...j/DSCF3333.jpg

---

Thanks for submitting :-)

Sorry Gabe been away for awhile. Here are a few that I'll submit. I have alot more but can't post everything. Don't have such good pictures of the purple one, but it is using the rad grill, and a 2 fan Swifty rad mounted inside top of the case for good measure haha. Some retouched, others still need background removed.

http://www.algidpc.com/Retouched/SideFullOpen.JPG


http://algidpc.com/Retouched/red1.JPG


http://algidpc.com/Retouched/blue5.JPG


http://algidpc.com/Retouched/blue4.JPG


http://algidpc.com/Retouched/purple.JPG


http://algidpc.com/Retouched/purple1.JPG


http://algidpc.com/Retouched/purple2.JPG


http://algidpc.com/Retouched/purple3.JPG

sorry for the bump but I was planning on buying that rad anyways and could really use it. Gabe sent me a PM asking for the 680i pics, I've (finally) replied.
now im all pissed off at myself for not checking my PM's often enough :shrug: :shakes:

edit: here are a couple of the pics I sent him in PM, the rest are under my profile on photobucket... way, way back... lol. 7 pages of misc computer crap. But yeah, early rev's had some kind of playtoh extruder which just shot this crap at the NB and SB (and probably Vreg which might have been what killed my board) I'll keep it to the NB but the SB was just as bad:

Before:
http://i119.photobucket.com/albums/o...2869443201.jpg
http://i119.photobucket.com/albums/o...2869437185.jpg

After an hour of 99% alcohol, I wish I had some kind of stronger solvent or maybe even an acid (the surface of the NB copper wasnt flat or fully clean or properly milled), but alas, just alcohol, so i got it as clean as I could. I replaced this crap with good old AS5.

After:
http://i119.photobucket.com/albums/o...2869455489.jpg
http://i119.photobucket.com/albums/o...2869697665.jpg

I also trimmed down the blac NB brackets (seen in the pic, the black box around where you can see the northbridge made contact with the heatsink) which were providing a resistive force to that of the springs and the screws.

I didn't have anyway of really taking an accurate temperature measurement, but I was able to sqeeze an several extra MHZ out of the board after.

http://img209.imageshack.us/img209/7986/dsc09077br2.jpg

Rbs.
:wave:

wow very clean install Rbs...

Mine is sloppy it just sits on top of my case on the outside, but the temps are GREAt for low speed fans, got it down to 21c during the cold last night :)

http://images36.fotosik.pl/19/bd67fd01abb05505med.jpg

very nice, may get one myself

you need examples of radbox?