Sammy is up and crunching..

Printable View

07-29-2008, 06:29 PM
Movieman

Sammy is up and crunching..

At a firebreathing 1995mhz on 4 cores..:rofl:
Got her up app 18 hours ago, running sweet and quiet..
Max temps are 37C at 100% load.
Claiming at a rate of 8145 PPD on WCG based on the first returned group of WU's.
Specs:
Black Lian LI PC 62 case(EATX of the PC60)
PCP+C 610w Silencer(Overkill but it was here)
Intel SE7520BB2 motherboard
http://www.centrix-intl.com/details.asp?productid=4675
2-2000/2mb/667 Sossaman's(Yonah)
2-1gig Kingston DDR2-400 ECC Reg 3-3-3-8-11
1-36 gig WD Raptor for OS
2-120 gig WD IDE for storage
Pics later..
07-29-2008, 06:32 PM
Philly_Boy

Congrats, Dave....nice addition to your "farm"...

I guess there's no way to overclock the cpu's? No pin mods, etc?
07-29-2008, 06:36 PM
Movieman

Quote:

Originally Posted by Philly_Boy

Congrats, Dave....nice addition to your "farm"...

I guess there's no way to overclock the cpu's? No pin mods, etc?

Well, the answer is maybe..
Meshmesh sent me a pin mod that should take the 2000/2mb/667's to 2400/2mb/800 but not tested yet..There is also another that "should" do 266 but the problem is then with the 12 multi 2000's your at 3192mhz and my gut tells me no way in hell.
The fastest yonah I ever saw was 2950 and they all seemed to die over 245 on the memory.
At 2400 they should pull just about 10,000 a day in WCG and that ain't bad.
07-29-2008, 07:15 PM
road-runner

Congrats Dave...
07-29-2008, 07:50 PM
Omastar

Where'd you find the Sossamans, Dave? ;)

Also, any idea where I could pick up some fairly cheap Noconas?
07-29-2008, 07:57 PM
Movieman

Quote:

Originally Posted by Omastar

Where'd you find the Sossamans, Dave? ;)

Also, any idea where I could pick up some fairly cheap Noconas?

A guy on ebay had 21 of the sossamans, $259.45 shipped for a pair.
Nocona's.. I have 2-3600/2mb/800's..:D
07-29-2008, 07:58 PM
WrigleyVillain

Nice Dave :up:
07-30-2008, 02:59 PM
SiGfever

Congratulations Dave. :clap:

Now overclock those babies until they squeal. :D
07-30-2008, 05:02 PM
WesM63

I got bored, the 1.67ghz Sammy's can be found online for $60ea ;)

Search 39Y6598-02. That is the IBM replacement part #.
08-02-2008, 07:14 PM
Movieman

Quote:

Originally Posted by WesM63

I got bored, the 1.67ghz Sammy's can be found online for $60ea ;)

Search 39Y6598-02. That is the IBM replacement part #.

WOW! That is cheap..
Sammy hade his first full+ day on Jerry's account:
Statistics Date Total Run Time(y:d:h:m:s) Points Generated Results Returned
08/02/2008 0:004:16:54:15 9,259 16
4 cores at 1995/2mb/667..Not too shabby and you can't even hear itr running and the air temp coming out of the exhaust fan is maybe 1-2F above room temp..
08-02-2008, 08:57 PM
[XC] junglemaster

Quote:

Originally Posted by Movieman

WOW! That is cheap..
Sammy hade his first full+ day on Jerry's account:
Statistics Date Total Run Time(y:d:h:m:s) Points Generated Results Returned
08/02/2008 0:004:16:54:15 9,259 16
4 cores at 1995/2mb/667..Not too shabby and you can't even hear itr running and the air temp coming out of the exhaust fan is maybe 1-2F above room temp..

Very nice... :clap:
08-10-2008, 05:42 AM
tiro_uspsss

pics? :D
08-10-2008, 10:41 AM
-Acid-

Were are sammy's pict's Dave!!!!
08-10-2008, 05:25 PM
[XC] moddolicous

I think it is time for a pin mod.
08-10-2008, 05:27 PM
Movieman

Quote:

Originally Posted by tiro_uspsss

pics? :D

coming

Quote:

Originally Posted by -Acid-

Were are sammy's pict's Dave!!!!

see above..:D

Quote:

Originally Posted by [XC] moddolicous

I think it is time for a pin mod.

Agreed, been busy with the Harpertown and almost forgot poor Sammy..
08-10-2008, 05:31 PM
ShootStraight

Now dont hurt Victor's new system. I'd talk with him before you go pin modding it. :ROTF:

-SS
08-10-2008, 05:33 PM
[XC] riptide

^^^ lulzz....
08-10-2008, 05:36 PM
just a noob

whens the looney truck coming to get you? i mean, i think your going :nuts: with your folding lol.
08-10-2008, 05:42 PM
[XC] riptide

Quote:

Originally Posted by just a noob

whens the looney truck coming to get you? i mean, i think your going :nuts: with your folding lol.

The looney truck came already and brought us all here. How the hell you think we got here? :D :ROTF:
08-10-2008, 06:01 PM
Movieman

Quote:

Originally Posted by ShootStraight

Now dont hurt Victor's new system. I'd talk with him before you go pin modding it. :ROTF:

-SS

Touche, very good..you got me!:up:

Quote:

Originally Posted by [XC] riptide

^^^ lulzz....

Oh be quiet you!:p:

Quote:

Originally Posted by just a noob

whens the looney truck coming to get you? i mean, i think your going :nuts: with your folding lol.

It got me back in November 2005 when I came here and saw all these people.
Almost 56.5 years on this planet and I've never met a finer group.
Now it's not "folding" it's "crunching"..
Folding is those "other" guys..
We both attack the same issues but in different ways.
I think this is the way to go.
With the info obtained from both apps the knowledge base is more complete and will cut the time until the cures are found.
08-10-2008, 06:05 PM
ShootStraight

Quote:

Originally Posted by Movieman

Touche, very good..you got me!:up: ...

LOL Just messin' with ya. ;)

-SS
08-10-2008, 06:06 PM
just a noob

i'm kinda tired right now, so i'm probably not going to type what i want at the moment, the one kind of cancer i hope we can find a cure for is for terminal(i should say i hope the most) on a little bit of a different note, i don't believe my great aunt is doing so well, apparently now her cancer has spread to her lungs, and her ribs from what i've heard
08-10-2008, 06:20 PM
Movieman

Quote:

Originally Posted by just a noob

i'm kinda tired right now, so i'm probably not going to type what i want at the moment, the one kind of cancer i hope we can find a cure for is for terminal(i should say i hope the most) on a little bit of a different note, i don't believe my great aunt is doing so well, apparently now her cancer has spread to her lungs, and her ribs from what i've heard

That is why we are here my friend.
To try and stop people from getting this kind of news.
If it cuts the time to save just one person this misery then it has been a worthwhile journey and I think we will do a whole lot better than that.
I think the work we do now will cut years off the time when they say "We have the cure for cancer"
My best to your Great Aunt..
08-10-2008, 06:50 PM
Movieman

Ok, a pic..Just one..:D

http://img523.imageshack.us/img523/1274/img0042ba1.jpg
08-10-2008, 06:53 PM
[XC] riptide

Is that an IDE controller card?
08-10-2008, 06:54 PM
fart_plume

sure looks like it to me.
08-10-2008, 06:54 PM
Movieman

Quote:

Originally Posted by [XC] riptide

Is that an IDE controller card?

Yup, old promise card I had.. Tossed a couple 120 gig drives I had on it for storage..
OS and all the crunching is on a 36 gig raptor..;)
08-10-2008, 06:55 PM
just a noob

if i get the cash, i want to have a party on my desk with that board :P but, is there a crunching client for gpu's?
08-10-2008, 06:57 PM
[XC] riptide

Quote:

Originally Posted by just a noob

if i get the cash, i want to have a party on my desk with that board :P but, is there a crunching client for gpu's?

Nope. Thats is F@H for now. Not WCG.
08-15-2008, 08:19 PM
eXa

Then throw a 8800gs card in there and let that do F@H...
08-15-2008, 08:23 PM
Kayin

There's only a PCI on that board.

That's why I picked what I did...
08-15-2008, 08:39 PM
Movieman

Quote:

Originally Posted by [XC] Kayin

There's only a PCI on that board.

That's why I picked what I did...

Yes, just two slots.
PCI-e X8 and PCI-X 133.. thats it folks but all I need..:up:
08-15-2008, 08:42 PM
tiro_uspsss

Quote:

Originally Posted by Movieman

Yes, just two slots.
PCI-e X8 and PCI-X 133.. thats it folks but all I need..:up:

u could add another slot :wasntme: :rofl:
08-15-2008, 09:15 PM
WesM63

Dave what size fan's do you have on the Heatsinks?
08-16-2008, 06:52 AM
Movieman

Quote:

Originally Posted by WesM63

Dave what size fan's do you have on the Heatsinks?

$2.69 80mm's from new egg..
I used a single 80mm before on the 120-80mm adapter plate but this time I had the fans and no plate so I went this route.
for elec cost the single is smarter and just as effective.
No difference is seen temps between one or 2 fans..
08-16-2008, 09:10 AM
WesM63

Quote:

Originally Posted by Movieman

$2.69 80mm's from new egg..
I used a single 80mm before on the 120-80mm adapter plate but this time I had the fans and no plate so I went this route.
for elec cost the single is smarter and just as effective.
No difference is seen temps between one or 2 fans..

Heh, I just like the looks of it.
08-16-2008, 12:45 PM
Movieman

A bump for the thread as hopefully some from the forum will be looking at it after my thread in wamps today.
Also here's some stats on what Sammy is doing in WCG:
......................Statistics
Date......... Total Run Time Points Generated Results Returned

08/15/2008 0:003:19:01:43 7,240 13
08/14/2008 0:004:22:02:13 9,603 17
08/13/2008 0:004:08:45:51 8,621 15
08/12/2008 0:003:03:55:03 6,199 11
08/11/2008 0:003:19:22:41 7,290 13
08/10/2008 0:004:01:37:10 7,736 14
08/09/2008 0:004:01:15:53 7,889 14
08/08/2008 0:004:07:14:26 8,455 15
08/07/2008 0:003:10:46:08 6,710 12
08/06/2008 0:003:12:31:25 7,073 12
08/05/2008 0:003:18:57:59 7,434 13
08/04/2008 0:004:21:36:05 9,201 17

7787.58 points a day average..
12-24-2008, 09:48 PM
IvanAndreevich

So did you end up pinmodding it?
12-24-2008, 09:52 PM
Movieman

Quote:

Originally Posted by IvanAndreevich

So did you end up pinmodding it?

pin mod didn't work..:(

All times are GMT -8. The time now is 10:00 AM.

XtremeSystems