Biostar Tpower I45 Hits 645mhz FSB

Printable View

06-11-2008, 11:50 PM
Pt1t

Biostar Tpower I45 Hits 645mhz FSB

http://www.overclex.net/data/images/...powerI451B.jpg

Yesterday i tested a new E8400 on the Biostar Tpower I45 :rolleyes:

E8400 in AIR , 1 core & single channel (630mhz on air 2 cores & dual channel)

Boot to 555*6 and jump to 645 ^^ , memset setting was 5-6-6-15-18 -6-45-11-14-16-5-8-6-6-3120T-2T

http://valid.x86-secret.com/show_oc.php?id=374126

http://valid.x86-secret.com/cache/screenshot/374126.png

I tested the board before with a E8500,

E8500 under Cascade , (625mhz on air on this board)

http://valid.x86-secret.com/show_oc.php?id=367447

http://valid.x86-secret.com/cache/screenshot/367447.png

I will do more test under cold :D
06-11-2008, 11:52 PM
Monstru

Great results. How much FSB do those 2 CPU's get on Commando? :)
06-12-2008, 12:02 AM
K404

To celebrate, you have to send that board to me :p:

nice to see Biostar bringing the goods :) Lets see some SPi32M at a higher multi ;)
06-12-2008, 12:06 AM
loopy83

Nice to see a very good FSB on a Biostar.... try higher multi and push it :)
06-12-2008, 12:07 AM
I34z1k

Awesome work as usual man :)
06-12-2008, 12:15 AM
kiwi

Do you know if biostar planning to release DDR3 + P45?
06-12-2008, 12:21 AM
massman

I want to see that same FSB using multiplier 7x, please :-)
06-12-2008, 12:24 AM
Pt1t

Quote:

Originally Posted by kiwi

Do you know if biostar planning to release DDR3 + P45?

Yes , but for 10-11 /2008
06-12-2008, 12:26 AM
Pt1t

Quote:

Originally Posted by massman

I want to see that same FSB using multiplier 7x, please :-)

i want to see 646 with 9X ;)
06-12-2008, 12:29 AM
Sadhiq

Quote:

Originally Posted by kiwi

Do you know if biostar planning to release DDR3 + P45?

I'm also waiting for this ! :up:

Would be great to have a P45+DDR3, high fsb and good scores.

Does 8x/8x CF bridle the performances ?
06-12-2008, 12:37 AM
massman

Quote:

Originally Posted by Pt1t

i want to see 646 with 9X ;)

:D:D:D
06-12-2008, 12:57 AM
kiwi

Quote:

Originally Posted by Pt1t

Yes , but for 10-11 /2008

socket 1366? :D 775 will be obsolete soon ;)
06-12-2008, 01:00 AM
Pt1t

Quote:

Originally Posted by kiwi

socket 1366? :D 775 will be obsolete soon ;)

Yes i know :)
06-12-2008, 01:04 AM
StellaNor

Darn, thats incredible performance, congrats :-)

Wish it would support DDR3 sooner.
06-12-2008, 01:07 AM
kiwi

Then why release old socket :confused: DDR3 for average Joe? :D
06-12-2008, 02:56 AM
massman

Quote:

Originally Posted by kiwi

775 will be obsolete soon ;)

Then you're misinformed ;).
06-12-2008, 03:14 AM
Bullet92

Seems that P45 mobo's like Wolfdale cpu's. First P5QE Dlx (ddr3 board) an now Biostar's TPower. Want to see Commando vs. TPower vs, P5QE Dlx soon :D
06-12-2008, 04:08 AM
kiwi

Quote:

Originally Posted by massman

Then you're misinformed ;).

Boards for average Joe don't count :D
06-12-2008, 04:10 AM
Pt1t

the TP45 HP also :D , just out of box and first boot ^^

http://valid.x86-secret.com/show_oc.php?id=374346

http://valid.x86-secret.com/ccpuz.ph...4346&nocache=1
06-12-2008, 05:49 AM
hey

Quote:

Originally Posted by Sadhiq

I'm also waiting for this ! :up:

Would be great to have a P45+DDR3, high fsb and good scores.

Does 8x/8x CF bridle the performances ?

in case of 06, only 100p difference with 16-16,vantage 50-70p difference. but in case of gaming performance it differs up to 7fps at bioshock 95-102fps..:up:

again nice results Thomas, lets see some xtreme benching session :up:
06-12-2008, 05:59 AM
massman

Quote:

Originally Posted by kiwi

Boards for average Joe don't count :D

I don't think you'll switch to Nehalem if you can't get a decent frequency out of it :p:
06-12-2008, 06:04 AM
dinos22

:eek::eek:
06-12-2008, 06:12 AM
Oliver

Impressive work Thomas...

Keep pushing it.
06-12-2008, 06:13 AM
ZoLKoRn

That's insane motherboard :D

Very nice FSB Thomas :up: so how lower Perf Lvl of memory is can get about ~600FSB ?

wait to see more benching buddy ;)
06-12-2008, 07:04 AM
Benny Lodewijk

great board !!! Any bench ???
06-12-2008, 07:16 AM
SeLecT

This is holy sh*t :banana:

I like this board! :D
06-12-2008, 08:25 AM
metro.cl

Here youy can read a BIOS OC Guide made by Biostar :)

http://www.biostar.com.tw/app/en-us/...45oc/index.htm

It has several SS from BIOS.
06-12-2008, 08:32 AM
Pt1t

Quote:

Originally Posted by Benny Lodewijk

great board !!! Any bench ???

This week end :D

now i m testing DS5 :)

and before to test all board under cold , i want to know max fsb on air on all :p
06-12-2008, 10:55 AM
jugeen

GJ Pt1t! :clap:
06-12-2008, 11:05 AM
[XC] gomeler

Holy Cheap Motherboard! Nicely done Thomas, wonder how much more you can pull out of those chips. You are an FSB clocking master.
06-12-2008, 06:19 PM
Glow9

Biostar is good stuff, every once in awhile they throw something real solid out there
06-12-2008, 07:02 PM
kenofstephen

obviosuly a Duo oc board,

no expectation on Quad at all.
06-12-2008, 07:12 PM
dinos22

Quote:

Originally Posted by kenofstephen

obviosuly a Duo oc board,

no expectation on Quad at all.

who cares about quads :yepp::D
06-12-2008, 07:30 PM
AceGoober

Wow! Nice FSB on that inexpensive board. Good job! :D
06-12-2008, 11:33 PM
Pt1t

Quote:

Originally Posted by kenofstephen

obviosuly a Duo oc board,

no expectation on Quad at all.

My QX9650 C0 did 515 on air

and

2* QX9650 C1 did 520mhz.
06-13-2008, 12:02 AM
Tony

Quote:

Originally Posted by Pt1t

My QX9650 C0 did 515 on air

and

2* QX9650 C1 did 520mhz.

Unfortunately thats not the norm m8, quads have FSB issues and 450 is usually good going.

Plus quads push a heavy load onto the MCH which will lower its ability to run FSB.
06-13-2008, 12:14 AM
Slay0r

Quote:

Originally Posted by Tony

Unfortunately thats not the norm m8, quads have FSB issues and 450 is usually good going.

Plus quads push a heavy load onto the MCH which will lower its ability to run FSB.

Pt1t says he's had 3 quads do 500+, perhaps this board/chipset allows a little bit more fsb than we've seen so far

any word on stability at those speeds Pt1t? good job on 645 by the way :up:
06-13-2008, 12:20 AM
Pt1t

Quote:

Originally Posted by Tony

Unfortunately thats not the norm m8, quads have FSB issues and 450 is usually good going.

Plus quads push a heavy load onto the MCH which will lower its ability to run FSB.

i tested the QX950 C0 on P5QE and it did also 515mhz, Boot @ 500mhz .

This chip did 490 on X48T DQ6 and 470 on foxconn blackOPS.
06-13-2008, 01:00 AM
erickwok

Quote:

Originally Posted by Pt1t

http://www.overclex.net/data/images/...powerI451B.jpg

Yesterday i tested a new E8400 on the Biostar Tpower I45 :rolleyes:

E8400 in AIR , 1 core & single channel (630mhz on air 2 cores & dual channel)

Boot to 555*6 and jump to 645 ^^ , memset setting was 5-6-6-15-18 -6-45-11-14-16-5-8-6-6-3120T-2T

http://valid.x86-secret.com/show_oc.php?id=374126

http://valid.x86-secret.com/cache/screenshot/374126.png

I tested the board before with a E8500,

E8500 under Cascade , (625mhz on air on this board)

http://valid.x86-secret.com/show_oc.php?id=367447

http://valid.x86-secret.com/cache/screenshot/367447.png

I will do more test under cold :D

amazing motherboard!

could you tell me what is the voltage settings ? (Vcore, Vnb... etc.) ;)
06-13-2008, 01:18 AM
Pt1t

Quote:

Originally Posted by erickwok

amazing motherboard!

could you tell me what is the voltage settings ? (Vcore, Vnb... etc.) ;)

Vcore 1.2
VBN +0.4v (~1.5v real)
VFSB +0.3v
Vpll 1.6v
06-13-2008, 03:03 AM
hixie

Quote:

Originally Posted by Pt1t

Vcore 1.2
VBN +0.4v (~1.5v real)
VFSB +0.3v
Vpll 1.6v

Thomas you geek, i still can't believe you picked this board over that Biostar chick :rofl::p:
Back on topic, this board seems very tempting, might have to get one to play around with.
06-13-2008, 03:04 AM
Pt1t

Quote:

Originally Posted by hixie

Thomas you geek, i still can't believe you picked this board over that Biostar chick :rofl::p:
Back on topic, this board seems very tempting, might have to get one to play around with.

:rofl:

Her ?

http://img261.imageshack.us/img261/8932/dsc08105fp1.jpg
06-13-2008, 03:12 AM
hixie

Quote:

Originally Posted by Pt1t

:rofl:

Her ?

http://img261.imageshack.us/img261/8932/dsc08105fp1.jpg

:yepp:
I'll see if i'm lucky enough to get both the board and the chick to play around with :D
06-13-2008, 03:21 AM
Harshal

Hehe.. Andrew, good luck with multi tasking man :D
Thanks for info Thomas :up:
06-13-2008, 03:31 AM
hixie

Quote:

Originally Posted by harshal

Hehe.. Andrew, good luck with multi tasking man :D
Thanks for info Thomas :up:

Don't compare me with some computer, i have enough processing power and threads to multi-task with the whole of computex. Just limited to one johnson :rofl:
06-13-2008, 04:11 AM
Oliver

Lol hixie...
06-13-2008, 04:29 AM
kenofstephen

Quote:

Originally Posted by dinos22

who cares about quads :yepp::D

no, I mean it.

my P45 can do 4.8GHz on air with 1.55v vcore.

I wonder how much can this 4-phase board can handle. :rolleyes:

in reality we need high main clock for daily operation instead of 1:1 FSB high.
06-13-2008, 04:30 AM
sofarfrome

Quote:

Originally Posted by Pt1t

Vcore 1.2
VBN +0.4v (~1.5v real)
VFSB +0.3v
Vpll 1.6v

and vdimm? those sticks must be begging for mercy
06-13-2008, 04:33 AM
kenofstephen

as most ppl can't get a 6xx FSB CPU, especially on Retail Box as all of us should know.

while it is much more easy to get a 5xx one,

so it would be nice to see this board runs at 5xx FSB, divider at 5:6 so that memory runs at 12xx-13xx.
06-13-2008, 04:47 AM
Pt1t

Here is pics of retail Board

http://www.overclex.net/data/images/...I45_bundle.jpg
06-13-2008, 05:29 AM
PcCI2iminal

nice work man
keep pushing :)
06-13-2008, 08:31 AM
Benny Lodewijk

i will have this board next week... hopefully the result will be the same :D
06-13-2008, 08:50 AM
Pt1t

a quick stability test @ 600mhz fsb :D

http://www.overclex.net/data/images/...tho_600mhz.PNG
06-13-2008, 09:26 AM
erickwok

Quote:

Originally Posted by Pt1t

Vcore 1.2
VBN +0.4v (~1.5v real)
VFSB +0.3v
Vpll 1.6v

thank you Pt1t!:up:
06-13-2008, 09:27 AM
Atal

what about the cpu batch number?? or did I miss it? gj with that FSB insaaane!!
06-13-2008, 11:16 AM
BlueAqua

Quote:

Originally Posted by Pt1t

i want to see 646 with 9X ;)

Why do you want to see that? :lsfight:

Best of luck to you, these P45's look killer.
06-13-2008, 11:27 AM
Pt1t

Quote:

Originally Posted by BlueAqua

Why do you want to see that? :lsfight:

Best of luck to you, these P45's look killer.

euhmmm :rolleyes:
06-13-2008, 11:30 AM
Pt1t

Quote:

Originally Posted by Atal

what about the cpu batch number?? or did I miss it? gj with that FSB insaaane!!

Q815Axxx E0
06-13-2008, 11:41 AM
jozzy

great job !! awesome numbers :up::up:

http://www.plikimage.com/images/pI685867.gif
06-13-2008, 12:29 PM
okorn

Thats some nice motherboard ;)
06-14-2008, 07:05 PM
kenofstephen

Quote:

Originally Posted by Pt1t

Q815Axxx E0

Q815A"518" through my brain scanning device.:ROTF:
06-14-2008, 08:54 PM
TheKarmakazi

nice work man these p45s are clocking very nicely!
06-15-2008, 10:26 PM
Kain XS

Hi Bro.
Very nice Mobo.
Can you try that 600 FSB with priority 9 on orthos or Large FTT?

Congrats man!
06-20-2008, 01:32 AM
Hutch

Sweet... I have one on it's way!

All times are GMT -8. The time now is 03:57 PM.

XtremeSystems