Printable View
Well seeing as the new section needs a few threads to get it started, I thought I'd post what I got up to the end of last year with my laptop!
http://xtreme.digitalreport.net/content/view/22/1/
http://xtreme.digitalreport.net/imag...ch/lappy/1.jpg
I've since got a little bit of a bug for laptop benching as you'll see from my hwbot page. ;) I know someone put a LN2 Tube under their keyboard once...don't know if they overclocked it though!
Thoughts? :D
wow... how do you use that laptop?
With one of these thingsQuote:
Originally Posted by Junimrox
http://www.westinghousedigital.com/i...nitor_hero.jpg
Yeah just about...
http://xtreme.digitalreport.net/imag...ch/lappy/3.jpg
Had to plug in a monitor, keyboard and mouse, and hang the computer over the side of the table so I could press the on/off switch which is above the keyboard near the hinge!
What fun... :D
thats insane...you could actually built it in you desk, and make a support for the tuniq so that it sorta hangs but still has enough pressure:D
that is awsome never seen anything like that before. i want to see more of this laptop benching.
thats pretty sweet what were the temps
wow, i find it useless to be true.. you should have gotten a normal mobo and processor 'cause thats what you actually used of the laptop...
That's cool!! But why?
You ask why, I ask "why not?"Quote:
Originally Posted by stocius
awesome!
what temps? default voltages?
congratulations... 1# :clap:
Don't give me ideas! :rofl:Quote:
Originally Posted by Giannis86
The trouble is finding a clockgen that will work. I have benched a lot of laptops but not all of them are overclockable.Quote:
Originally Posted by natedog420
Can't remember, this was a while ago. I did have the patio doors open and it was December - I remember my thumb going number as I held the watercooling block down! ;)Quote:
Originally Posted by Chewb|t
I have two PC's as well. One is benching and testing rig for Digital Report reviews, and the other is my day-to-day web+surfing rig.Quote:
Originally Posted by Junimrox
Quote:
Originally Posted by stocius
Beat me to it :DQuote:
Originally Posted by Rmrdr13
Thanks! As I said, I can't remember temps - don't think I looked at all because the BIOS obviously doesn't let you increase voltages and I don't know how to find vcore mods etc.Quote:
Originally Posted by pxhx
The CPU could have gone a lot further but the laptop hit a brick wall at 120Mhz FSB and 200Mhz DDR1. I don't know which was responsible, but it wouldn't go 1Mhz further, after being 100% stable 1Mhz lower.
I took all the world records for the CPU and GPU, and this was even before I knew about LoD and other tweaks!
Thanks for the support guys, I appreciate it :clap:
is the tuniq fan plugged into your laptop?
i wouldn't think so, but if it is id be interested to know how/where
No it wasn't, I had a standard PSU plugged in running the Corsair Hydrocool unit and a fan controller for the Tuniq.
:)
Anyone else felt like running a few benchmarks becuase of this? I notice a couple of my hwbot records for other laptops have dropped a position or two since I posted this thread! :p:
That's insane :up: (in a good way)
It looks like you managed to bolt the tuniq tower to the mobo... make a hole in the table and you can use your laptop like normal again :ROTF:
Links don't work for me? :confused:
Not bolted, it was just resting on the NB and GPU. No holes are/were drilled! :eek:Quote:
Originally Posted by oohms
Working here, anyone else?Quote:
Originally Posted by Polizei
Must've been because I was at work. I'm back at home now and the links work. Hey, there's even a picture in the first post! :rolleyes:
That's ok then! :)Quote:
Originally Posted by Polizei
I have the same thing at work - all free imaging sites like Imageshack are blocked so I don't see any photos. :shakes:
Not that... I didn't see the picture in the first post and your link didn't work. First time I've ever run into that problem while at work.
hehe love the concept :)
Once a fellow dane did the same... Retired XS member... Tom Holck, he put his cascade on the laptop... :P
It did VERY well in SuperPi, hehe...
I've planned good time to make watercooling INSIDE of an Laptop :D
Need to find freaking small pump and that laptop. Donations plz :rofl:
But yea nice concept indeed :up:
Nice job, no Project should ever be questioned! People get bored, and cool stuff happens.
Pretty sweet mod, not the first thing you would imagine a laptop to look like, but we're not here for the common stuff - you can find that at your local Best Buy. :)
haha nice, definently Xtreme but kinda lacking the mobility :lol:
Thats actually pretty cool, a waterblock on a laptop.. lol
:rofl:Quote:
Originally Posted by afireinside
cant you pad mod the cpu like a desktop cpu?
Very Cool !
I liked the LN2 one as well,can't believe some guys are asking why.
For these wanting "mobility'' there is a possibility:
with enough time and effort any laptop could be put in a car, maybe even hocked up to the car's cooling system ?:p: