Project 900 Airbrushed

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

Starting new project on the 'Antec 900', old one is scrapped, starting from scratch. Been busy this weekend prepping a few panels for sprayin, and 'streamlinning'! :wink: the case, more room for airbrushing :)
Anywayz heres the pics so far, few more to follow later enjoy

Converted the shed where i do my airbrushing, spraying,modz etc;
http://img232.imageshack.us/img232/373/12345307on4.jpg[/url]

The airbrushes/sprayguns i use, iwata/sata only the best will do :D
http://img231.imageshack.us/img231/9509/25101752dj2.jpg[/url]

After laying down the primer panels looked pretty bad, scratches and dents all over them, being my old case been thrown around abit :P , out comes the body filler:
http://img231.imageshack.us/img231/7963/25471671po2.jpg[/url]
http://img229.imageshack.us/img229/4590/50358295uc3.jpg[/url]

I wanted a flat surface ontop, so i removed the plastic vent thing, that holds dat massive fan (gona use it on my other case, somhow!) of the top, and glued some metal from an old case underneath the fill the gaps:
http://img229.imageshack.us/img229/6084/69813964kx4.jpg[/url]
http://img229.imageshack.us/img229/2788/31964439td2.jpg[/url]

Time for the bodyfiller, sandin this stuff is a big pain dust everywhere, shed is gona need a good clean before spraying:
http://img373.imageshack.us/img373/7125/75gm1.jpg[/url]
http://img229.imageshack.us/img229/8199/30535242gg3.jpg[/url]

I reccomend you get one of these mouse sanders, make the job alot quicker and easier:
http://img373.imageshack.us/img373/2407/50149044ek8.jpg[/url]

10mins later ive sanded it down and its pretty level few little holes, final coat of putty, smother finish than body filler:
http://img229.imageshack.us/img229/7259/10gt6.jpg[/url]
http://img225.imageshack.us/img225/2150/11qi5.jpg[/url]

more pics later

Welcome to XS :toast:

What will be the theme for this case and what will you paint on it?

prob real flames, duno, change mind half way through

Quick update

Panels sanded, you can see old flame job underneath one panel, hope dosn't show through primer :P
http://img176.imageshack.us/img176/3007/41193681uj0.jpg[/url]

Top panel came out good, another coat of primer/sand, and dats ready for airbrushin
http://img160.imageshack.us/img160/5983/62548591pk9.jpg[/url]

This stuff is called intercoat clear, use it as protective layer to stop primer lifting
http://img223.imageshack.us/img223/6527/12513256st7.jpg[/url]

Panels preped ready for paintjob, startin dat tomoz its gettin late :wink:
http://img176.imageshack.us/img176/7641/71281902sj9.jpg[/url]

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

cool case, although i don't like that window.

Suscribed :d i love Antec 900 but i sold my last one :p

i love air brushed cases, it takes such skill to pull it off nice, and much props to anyone who can do it nicely, great skill.

I really hope it turns out great.

:up: subbed

Prep work looks good, be sure to update everyone once you get those painted.

:yepp:

Love your shop. I'm watching this one closely. Keep us posted.:up:

Had a few hours to spare 2nite, started on one of the panels, heres da pics so far

Trying a new stone effect, and gona spray somthing ontop like a skull, anyone got any ideas?

First of spray some gray lines to create a uneven texture;
http://img227.imageshack.us/img227/3779/28672940qp8.jpg[/url]

Next using a technique called stippling i tink? lots of grey dots! :P
http://img227.imageshack.us/img227/6242/54466408it2.jpg[/url]

Do the same with black, then a little white
http://img227.imageshack.us/img227/4482/42653359pm9.jpg[/url]
Closeup

http://img233.imageshack.us/img233/8518/70771118nz4.jpg[/url]

Outlining the cracks with black:
http://img81.imageshack.us/img81/7289/43757811xy1.jpg[/url]

Add shadows, and water weathered look with transparent black
http://img227.imageshack.us/img227/9839/19283200tm4.jpg[/url]

White highlights, job done
http://img227.imageshack.us/img227/8940/37583058et6.jpg[/url]

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

I've never seen a stone textured case except maybe the uber modded doom 3 case, should be interesting :).

:welcome: to XtremeSystems, awesome work, and a great intro. since this will be an ongoing project can you post some of your other artwork?

I did a stone texture on my 360, and I really like the way it turned out

http://a926.ac-images.myspacecdn.com...5a0f58cd25.jpg

good luck with your 900!

Looks excellent so far!

Looks promising, might finally see a 900 that looks good.

I don't like stone paintings, because most of them turn to be very ugly and don't look like stone, but let's see this one, i think it might come out really good.

Cheers for comments, finished the other panel, just needs clearoat.
Couple of pics, was thinking bout adding graphic popping out of the stone saying 'Antec 900', and maybe skull/gargoyle any other ideas?

http://img229.imageshack.us/img229/640/91490617lw9.jpg[/url]

http://img80.imageshack.us/img80/6803/61896971kx1.jpg[/url]

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

Quote:

---

Originally Posted by LuckyX2

I did a stone texture on my 360, and I really like the way it turned out

http://a926.ac-images.myspacecdn.com...5a0f58cd25.jpg

good luck with your 900!

---

Nice 360, did you use airbrush to do that?

Quote:

---

Originally Posted by dean0

Cheers for comments, finished the other panel, just needs clearoat.
Couple of pics, was thinking bout adding graphic popping out of the stone saying 'Antec 900', and maybe skull/gargoyle any other ideas?

---

Its not a matter of asking us for ideas, it is your piece, you present to us what ever your ability allows you to do, or you want to do.:up:

I love seeing creativity @ its finest.

looking awesome, you could offer your talents to other's.

keep updating us

that does look really cool :). can't wait to see the finished piece!

Finished sprayin the primer for inside panels, just need quick sandin down. gona be black with nice shiny clearcoat, heres da pics, enjoy!

http://img227.imageshack.us/img227/1073/dscf0183td5.jpg[/url]

http://img227.imageshack.us/img227/4316/dscf0184sm9.jpg[/url]

cant wait 2 sand these ;)
http://img88.imageshack.us/img88/7671/dscf0185hw7.jpg[/url]

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

Painted the case frame basecoat black, you can see in the pics it is matt and requires a clearcoat to protect the paint from chipping and gives it nice deep shinny finish :P Anough talk heres da pics

http://img231.imageshack.us/img231/712/dscf0186wh8.jpg[/url]

http://img223.imageshack.us/img223/2109/dscf0189kb6.jpg[/url]

http://img214.imageshack.us/img214/4215/dscf0190jc3.jpg[/url]

This is 2k laquer, nasty stuff, use a respirator ibn well ventilated area. I put tissue in the respirator for extra protection, and open both doors in shed.

http://img214.imageshack.us/img214/1659/dscf0192bp7.jpg[/url]

First apply very light tack coat then 2-3 wet coats
http://img214.imageshack.us/img214/7321/dscf0194fb4.jpg[/url]

You can see the fumes in the pic and that with both doors open, iam getting an extractor soon, that should take care of dat
http://img214.imageshack.us/img214/3082/dscf0195fn9.jpg[/url]

Just waitin for tack coat to dry and ill update with pics later

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

This is looking good so far! can't wait to see it finished!

Ps. nice xbox luckyx2! very nice indeed!

very beatiful,

good luck

I've never really been a fan of the Antec 900, save a few custom cases. This is definitely one of them. Great Job! :up:

Noice!

can't decide how to mod the front of the antec 900 anyone gt ne good! ideas? heres a few pics from sketchup what i plan to do 2 da top, the holes are gona have a lip, usin body filler and those 120mm fan duct tingz :P , not flat like in the pic.
Heres pics from sketchup, firrst time ive used it, took quite a while to figure out.
Any you guys know where i can get a sketchup file for the lian li 343g, startin dat project next month some time, gt da case waitin for w/c parts.

http://img145.imageshack.us/img145/1...opless1fd2.png[/url]

http://img145.imageshack.us/img145/8...pless11zb9.png[/url]

http://img222.imageshack.us/img222/1...pless12xz9.png[/url]

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

:welcome: to XtremeSystems dean0 :) Thanks for sharing your skills with us. The more info the better.

1. How big is the tank on your compressor?
2. What pressure do you use with the cup gun?
3. What pressure do you use with the airbrush?
4. Where are you from?

Quote:

---

Originally Posted by runmc

:welcome: to XtremeSystems dean0 :) Thanks for sharing your skills with us. The more info the better.

1. How big is the tank on your compressor?
2. What pressure do you use with the cup gun?
3. What pressure do you use with the airbrush?
4. Where are you from?

---

1 I use a loud 25ltr compressor, built a box frm mdf with foam paddin and you cant evemn here it! great money saver, those silent compressor are a small fortune 4 a decent one with a good output.
2 about 40psi, the compressor i use is constantly runnin when i use the spraygun, need a bigger tank realy 50ltr would be ideal
3 depends on what your doin detial work can be as low as 15psi up to aroun d 40psi. For general work i use around 35psi, all depends on needle size and how reduced the paint is.
4 London, hope da info is useful :D

Nice job on the stone... I've never seen that on a case before. :up:

As far as suggestions for what to paint over it... cave paintings maybe? Ironic that there are primative cave paintings on the outside and then computer inside. Or writing on it like an engraved stone tablet or something like that.

Wot you think of this desgin? the front 3 fans will be the turbine style fans, and mayb top 2 aswell :p: .

http://img81.imageshack.us/img81/4858/67751128ub6.png[/url]

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

maybe have some water leaking through the cracks of the stone, with a bit of mos or grass growing out of the cracks as well.
just some thoughts :)

Quote:

---

Originally Posted by Ghost742

maybe have some water leaking through the cracks of the stone, with a bit of mos or grass growing out of the cracks as well.
just some thoughts :)

---

:up:

Adding some green or brown for dirt/moss/vegitation would make it look more real.

iam havin 'Antec 900' logo on the side panel. its gona look like lava/magma spliing out of cracks in the stone. should add a bit of color to the design.

Looks awesome so far! I will be watching this one. Great work.

Honestly the idea of cave paintings and what not on the outside sounds hilariously ironic to me, i'd love to see that.

@ dean0

again, awesome job

you should pimp out your services. my friend paid £250 (over 540 dollors) to have a welsh dragon sprayed into the side of his van a year or so back. the blending of colors and tones were like your case above.

have seen a few boy racers and work vans with such work. you should advertise your capabilities

Update time! riveted the frame together, strartin on the two front fan's, heres da pics, enjoy :P

As you can see the frame isnt clearcoated, decided not to bother in the end, to much hassle sandin the frame :lol: . Don't worry im still clearcoatin everything on the outside! You may notice that the base panel is metalic blue on the outside, had a can on da shelf, fort i would use it.
http://img225.imageshack.us/img225/1525/53542128vs3.jpg[/url]

http://img354.imageshack.us/img354/3508/88189229ru0.jpg[/url]

Layout of the fans, might add a 3rd aint decided. See what two looks like first
http://img88.imageshack.us/img88/1821/99490171wv5.jpg[/url]

110mm platic pipe, marked and ready for the dremal!
http://img88.imageshack.us/img88/4152/77350246iq8.jpg[/url]

Safety first wear googles, you might look like a prik but its beta than lookin like a pirate for rest of ya life
http://img88.imageshack.us/img88/4571/41764981gl7.jpg
[/url]

Quick gridin down so the 110mm pipe fits nicely
http://img88.imageshack.us/img88/8987/73782588gs1.jpg[/url]

Nice!
http://img88.imageshack.us/img88/8589/14651096kz1.jpg[/url]

Couple coats of bodyfiller (p38 i tink), ready for the mouse sander.
http://img88.imageshack.us/img88/859/58639436yi5.jpg[/url]

http://img354.imageshack.us/img354/2861/31457632ug0.jpg[/url]

Next coat
http://img88.imageshack.us/img88/1199/10jl8.jpg[/url]

Update tomoz

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

Looking good!!
Whats this mold stuff you used?

Quote:

---

Originally Posted by smee

Looking good!!
Whats this mold stuff you used?

---

body filler, get it from any autoparts store

bondo? for a minute it looked like plaster, that would have been exaggerating the hole stone theme lol

Nice Sketchup of the 900. Now is that my original antec 900 sketchup model?
http://sketchup.google.com/3dwarehou...17a316bcc2959a

Or is it the modified version of mine done by GreyRadean?
http://sketchup.google.com/3dwarehou...0f&prevstart=0

Love what your doing with the case. Puts an all new look to it. Looks like the 120mm fans in the top will be a tight fit since there isn't allot of space above the motherboard. The tree front fan mod is easily done but you will have to find a way to get a CD/DVD ROM in the system. Most people who do the 3 front fans generally mod a slot load into the bottom of the case. I've considered removing the IO and buttons from the top bezel of the case and putting a slot loaded there at that angle.

Update, managed to gt the fans sanded into shape and first coat of primer, which showed up couple of blemishes but noin major, bit of putty and quick sand should sort it out, few pics of progress:

First up i had so give workshop good claean after sandin bodyfiller, stuff was everywhere, wont stay like this long :P
Before, and you cant see the state of the floor!
http://img210.imageshack.us/img210/6828/b4di2.jpg[/url]
After, FRESHNESS!
http://img120.imageshack.us/img120/3912/46923627us8.jpg[/url]

Happy with the finish on the top panel after the primer, quick sand then ready for the airbrush! and mayb a couple of fans :wink:
http://img169.imageshack.us/img169/6045/44539569yn2.jpg[/url]
http://img524.imageshack.us/img524/9877/98753560aw0.jpg[/url]

nearly finish fans, aint decided whether to airbrush these or paint black what you tink?
http://img166.imageshack.us/img166/571/64654538ii2.jpg[/url]
http://img156.imageshack.us/img156/9909/92249898kq3.jpg[/url]
http://img407.imageshack.us/img407/9498/88483506zh1.jpg[/url]

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

Dean where do you live? Would you like to see your rig on the cover of CPU Magazine?

http://www.pdxlan.net/forums/viewtopic.php?t=4493

So far at least 4 PDXLAN modder have had our rigs on the cover (my Autopsy, Dead Guy's red acrylic tower, Qtips Digg rig, and the Trash 80 mod on the cover this month).

PDXLAN and CPU Magazine are holdig an Antec 900 ONLY case mod contest at PDXLAN 12. Top spot is 1500 bucks, front cover plus two pages inside, and usually other hardware is also awarded.

Quote:

---

Originally Posted by DarthBeavis

Dean where do you live? Would you like to see your rig on the cover of CPU Magazine?

http://www.pdxlan.net/forums/viewtopic.php?t=4493

So far at least 4 PDXLAN modder have had our rigs on the cover (my Autopsy, Dead Guy's red acrylic tower, Qtips Digg rig, and the Trash 80 mod on the cover this month).

PDXLAN and CPU Magazine are holdig an Antec 900 ONLY case mod contest at PDXLAN 12. Top spot is 1500 bucks, front cover plus two pages inside, and usually other hardware is also awarded.

---

Yeh mate sounds gd, i live in london, how do i apply?

you have to attend

Quote:

---

Originally Posted by DarthBeavis

you have to attend

---

where is it?

Quote:

---

Originally Posted by dean0

where is it?

---

Portland, Oregon

Had some time to spare today, made a start airbrushing the top panel, i'll explain over the pics, enjoy :P

Prepped and ready for spraying
http://img87.imageshack.us/img87/2449/92915924xl0.jpg[/url]

Same as side panels grey, black then white stippling to create stone effect, test fit, nice 8)
http://img136.imageshack.us/img136/4079/40004980kq8.jpg[/url]

Mark out the cracks on the top panel with trans black
http://img87.imageshack.us/img87/3748/11232809ki5.jpg[/url]
http://img217.imageshack.us/img217/904/11857002il3.jpg[/url]

Join them up!

http://img217.imageshack.us/img217/3888/28586790is6.jpg[/url]

Base is done ready for the graphics, then clearcoat. Should be starting the graphics tomoz, more pics to follow :wink:
http://img87.imageshack.us/img87/7499/89851878rn2.jpg[/url]
http://img217.imageshack.us/img217/3794/55176873zn3.jpg[/url]
http://img217.imageshack.us/img217/5453/53019120ql4.jpg[/url]

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

Looks awesome thus far.

Nice work.

nice work so far
i've always been a nut for airbrushed cases

now...
...what hardware are you installing there? :p:

Quote:

---

Originally Posted by Janno

nice work so far
i've always been a nut for airbrushed cases

now...
...what hardware are you installing there? :p:

---

Cheers mate, well this is my old case aint decided yet, im using a lianli 343 atm project coming soon! :cool: Iam getting a new x48 mb/45nm cpu soon so it will prob have my current i35pro and q6600.
What is the best x48 motherboard for overclocking? i had a look at the 'Asus P5E3 Premium/Wifi@N Intel X48 (Socket 775) PCI-Express DDR3 Motherboard', very nice indeed is this the best? anything else coming soon? ow yeh iam getting phase cooler from Dimas Tech :D first one! (http://www.dimastech.it/scripts/sp.php?Id=47&lang=EN), anyone bought from here before? are they anygood? cheers for the comments as allways, should have interesting update tomoz :p:

Damn nice job on that case! :up:

Quote:

---

Originally Posted by dean0

Cheers mate, well this is my old case aint decided yet, im using a lianli 343 atm project coming soon! :cool: Iam getting a new x48 mb/45nm cpu soon so it will prob have my current i35pro and q6600.
What is the best x48 motherboard for overclocking? i had a look at the 'Asus P5E3 Premium/Wifi@N Intel X48 (Socket 775) PCI-Express DDR3 Motherboard', very nice indeed is this the best? anything else coming soon? ow yeh iam getting phase cooler from Dimas Tech :D first one! (http://www.dimastech.it/scripts/sp.php?Id=47&lang=EN), anyone bought from here before? are they anygood? cheers for the comments as allways, should have interesting update tomoz :p:

---

Link dosn't work for some reason :confused: anywayz its the DT008 - DimasTech EVO Beast Controlled, gona be about £600 including postage is this a good price? i was told by the guy who builds them it could cool a quad core

Dimas is a good guy. Should work well.

Check the phase change forum here for some of his work.

man this case is coming out beautiful :up:

Love the case!

wow that is just crazy :up:

Wow!!!! it's Crazy man...
Congratulations, real nice job....

Quote:

---

Originally Posted by dean0

http://img166.imageshack.us/img166/571/64654538ii2.jpg[/url]

---

I love what you've done with those!

starting work on the front bezal and final sand primer coat on fan modules before they get airbrushed. finally finished using body filler, the stuff realy fu*ks you off after a while. Anywayz heres the pics, just waitin for the parts to dry then mayb airbrush them later.

Filling in the holes at the top of the bezal;
http://img233.imageshack.us/img233/7871/42054707bc7.jpg[/url]

..and the antec logo;
http://img396.imageshack.us/img396/4631/32375756gn2.jpg[/url]

Sanded the top part down ready for primer;
http://img233.imageshack.us/img233/9137/13268513vd1.jpg[/url]

..and the logo
http://img233.imageshack.us/img233/8073/14307032ul5.jpg[/url]

Finished, primer still wet in pic;
http://img396.imageshack.us/img396/6879/91742649xs2.jpg[/url]

No more cheap Antec logo 8)
http://img160.imageshack.us/img160/8933/38322750ql9.jpg[/url]

sanded fan modules and another quick coat of primer;
http://img396.imageshack.us/img396/15/51434819dd2.jpg[/url]

You may notice something missing from this fan module;
http://img217.imageshack.us/img217/353/59272210uu6.jpg[/url]

Here it is! i broke the fan :lol: , bit ruff with the sandin. o well i have spare one somwhere.
http://img160.imageshack.us/img160/600/81098577hc9.jpg[/url]

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

ow ye i just bought this phase change unit for £325 is it worth it, is it anygood? i know nothing about phase :D
heres the link

http://cgi.ebay.co.uk/ws/eBayISAPI.d...TODAY.m238.lVI

Bit from the description;

'Has only been used for bench testing my new rig
with very little use, also some gaming whilst testing
my tri Sli rig you can run this unit 24/7 if you wish to and it
cools down to around -69 with no load and cools my
core 2 duo E6850 down to around -48 overclocked at 4.20 Ghz
1.560 Vcore.
This unit would be ideal for a heavy overclocked Qaud core
around 300 watts or more offering far better cooling
than a Mach 2 GT or Ls'

Doesn't say who built it, but sounds like a good unit. It's designed to deal with high heat output, like that of quad cores. No processor out no outputs more than 300w, so you are set.

If he said who built it and what evaporator design is in it, it would be easier to give you a thumbs up or down. Looks to be thumbs up though. Post a link in the phase change forum here, someone should be able to help you.

man that is looking really good. I have been looking around for some good 900 builds to give me ideas for what to do with mine, and I am really liking what you are doing. I can't wait to be able to post my work log! I just need the balls to actually go tear my case apart :D

Quote:

---

Originally Posted by nOcLuE98

I just need the balls to actually go tear my case apart :D

---

Haha me too :rofl:

Very nice! First time iv seen fan mods on top of the 900. Looks like you have an awesome workshop.

Primer is dry, quick sand with 1500 grit get the surface nice and smooth ready for airbrushing;

First mask off the area that is be airbrushed, using 'low' tack masking tape or it might lift the primer;
http://img231.imageshack.us/img231/9781/12so9.jpg[/url]

The area that is coverved in masking tape will be sprayed black to match the case frame;
http://img388.imageshack.us/img388/394/48724835vn5.jpg[/url]

Bezel is being airbrushed aswell;
http://img388.imageshack.us/img388/7687/73968600nc6.jpg[/url]

Fan modules finished just need to add some weathering and cracks;
http://img388.imageshack.us/img388/4232/30600035mn3.jpghttp://<br /> <br /> ...same with ....jpg&#91;/img]

no more holes;
http://img388.imageshack.us/img388/9681/97658825qd7.jpg[/url]

antec logo gone forever;
http://img388.imageshack.us/img388/24/36656687yz7.jpg[/url]

fans with the masking tape removed;
http://img220.imageshack.us/img220/20/82dk1.jpg[/url]
http://img231.imageshack.us/img231/3709/61570666at4.jpg[/url]
http://img388.imageshack.us/img388/3423/35803328sr5.jpg[/url]
http://img220.imageshack.us/img220/9632/10mt5.jpg[/url]

Update tomoz, need to spray the fan module frames black, and add weathered/cracks onto modules and bezal to match panels. Start graphics on the panels, and thats about it :lol: thanks 4ya comments :wink:

Interested in getting any airbrushing done? pop over to http://i88.photobucket.com/albums/k1...rjosh/logo.gif

nice work! the fans look really nice! you did really excellent work.

I hope the fans don't burn out on you. With all that paint on them they are sure to be off balance now so your sure to get more noise coming from them. But everything looks great.

amazing work!

That is an amazingly sexy case. I really love the stone look.

Eller

Quote:

---

Originally Posted by dean0

http://img407.imageshack.us/img407/9498/88483506zh1.jpg

---

Looking goooood..! Nice job with the brushing, looking forward for the Lian-Li case too. This is by far the best 900 case I've seen:yepp: That stony look came up pretty good, I had my doubts about it at first but now that I see it all coming together..:up:

WOW!!
OMG!!
You definetely deserve another post bump from me.
You're going to have a bright future..Excellent job you've accomplished thus far. :up:

Excellent job!
I would easily classify this as art, instead of just a mod.

Whoa man!! This looks awesome!
I want pics with hardware in i!! :D :clap: :clap:

Hows this coming?

Although I like the antec 900 looking more or less like stock, this mods looking great so far!

looking really good man can't wait to see it finished.

I gotta subscribe here!!
Lots of great work man, IT LOOKS LIKE STOOOONE :-O

Any more pics? Look good mate, very clean and professional.

Any Updates???

there it is there .. Lookin good mang . Nice guns too . I need your shop area to work in LOL. This is my latest project . Antec
NSK 4480B case ,, AMD 5600 2.8 gig 800 fsb dual core CPU,
ECS 6100-SH-M motherboard
OCZ TITANIUM pc 6400 ddr2 800 RAM 2 gigs
Zalman 9700 CPU HEATSINK w 120 mm blue led fan w arctic 5 paste
BFG g force 7300 256 mb pci E video card w/dvi, fan cooled
Aver Media tv go 007 cable tv card , watch cable tv on PC !!
Creativer Labs AUDIGY 2 value 24 bit 192 khz
SeaGate barracuda 500 Gig sata 2 hard drive 7200 rpm
Lite On DVD/CD burner 20x48x16x12x12
USB 2 x 6
380 watt pwr sply, Modified by Radical pcs 2 rail , 12 v 17a
5V 20a,3.3 v 20 a. Custom wired. 120 mm blue led rear fan, ,80
mm Blue led fan in front.. All hard wired . no adapters. Runs well
for a 2.8 hardly warmed up.