New System, First Time Water Cooling

I am just about to buy the last few components for the PC itself, and look forward to water cooling it. The computer's specs are/will be as follows:
Case: Lian Li V2000B
PSU: Corsair TX750W
Motherboard: DFI LP UT P35 T2R
RAM: Teamgroup Xtreem DDR2 1066
CPU: Intel Q6600 G0
Video Card: EVGA 8800GTS[G92] 512MB

I was planning on the following loop, was wondering if you could give advice.

CPU Block: MC-TDX 1/2"
GPU Block: IONE for Nvidia G92 GT and GTS 1/2"
Pump: DD12V-D5 1/2"
Radiator: Black Ice GTX360 1/2" High Flow Barbs
Reservoir: Danger Den Dual 5 1/4 Bay 1/2"
Tubing: Tygon 3603 1/2" ID 3/4" OD [Six feet enough? or how much tubing should I get?}
Thermal Paste: Arctic Silver
Additive: Swiftech HydrX Coolant
Main Fluid: Distilled Water


What are your thoughts on this loop and any ideas on what I should expect for temps? Any parts I should change?

Thanks in advance for everything!

Quote:

---

Originally Posted by bizkit35461

I am just about to buy the last few components for the PC itself, and look forward to water cooling it. The computer's specs are/will be as follows:
Case: Lian Li V2000B
PSU: Corsair TX750W
Motherboard: DFI LP UT P35 T2R
RAM: Teamgroup Xtreem DDR2 1066
CPU: Intel Q6600
Video Card: EVGA 8800GTS[G92] 512MB

I was planning on the following loop, was wondering if you could give advice.

CPU Block: MC-TDX 1/2"
GPU Block: IONE for Nvidia G92 GT and GTS 1/2"
Pump: DD12V-D5 1/2"
Radiator: Black Ice GTX360 1/2" High Flow Barbs
Reservoir: Danger Den Dual 5 1/4 Bay 1/2"
Tubing: Tygon 3603 1/2" ID 3/4" OD [Six feet enough? or how much tubing should I get?}
Thermal Paste: Arctic Silver
Additive: Swiftech HydrX Coolant
Main Fluid: Distilled Water


What are your thoughts on this loop and any ideas on what I should expect for temps? Any parts I should change?

Thanks in advance for everything!

---

I'd reccomend going with a d-tek fuzion with the quad nozzle, a mcw 60 with ram sinks, a d5, a mcr-320, a t-line, a bunch of dangerden's new chrome fittings, at least 15 feet of tygon r3603 and some distilled water and pt-nuke. order from petra's

EDIT: Booger beat me to it

I would change the radiator to a swiftech MCR320 or a thermochil 120.3

i would also change the block to a d tek fusion or an EK supreme

Pump choice is good, id go for 7/16" tubing, it fits over 1/2" barbs, but gives a nice seal than 1/2" tubing.

I havent seen the GPU block you list, but a swiftech MC60 would be a good choice

taylor

The IONE works great for me, temps are fine and hard to believe but it has better flow than the MWC-60 in Martins flow tests.

The Fuzion with the o-ring works better.

The other recommended rads are better.

6 ft is not enough, get 10 to start, you might use 8 ft, nice to have an extra couple feet.

remember, if you do frequent upgrades, a fullcover block won't do cause if you get a new v card, then you need a new wb. a mcw60 has great compatibility

After some of the comment I changed the radiator and GPU ideas. I was interested with why people have been saying not to go with the MC-TDX. My reasoning for going with the MC-TDX were as follows:
http://www.techpowerup.com/reviews/DangerDen/MC-TDX and
http://www.xtremesystems.org/forums/...d.php?t=172970

It seemed that it could be superior or equal to the Fuzion. Was wondering what makes the Fuzion a better buy?

CPU Block: MC-TDX 1/2"
GPU Block: MCW-60 1/2" w/ ZALman RAMsinks
Pump: DD12V-D5 1/2"
Radiator: ThermoChill PA 120.3 1/2"
Reservoir: Danger Den Dual 5 1/4 Bay 1/2"
Tubing: Tygon 3603 1/2" ID 3/4" OD [12 Ft.]
Thermal Paste: Arctic Silver
Additive: Swiftech HydrX Coolant
Main Fluid: Distilled Water

well, techpowerup doesn't have a direct comparison with the fuzion, and the fuzion has known performance numbers. the mc-tdx does not. choose either block you want, the difference is probably 3 degrees celcius differnece if not less. wait for martin to finish testing if you really want the best results

Decided to stick with the MC-TDX and went with an IONE for the 8800 due to availability of the MCW60. Waiting for those to arrive but here's the beginning of the project to be:

I Have the cpu, motherboard and case so far : )

http://img215.imageshack.us/img215/6728/img0112lv8.jpg
http://img216.imageshack.us/img216/9066/img0237mp7.jpg
http://img216.imageshack.us/img216/1149/img0483cd2.jpg

No hijack intended... but what is "Fuzion with O-ring"? I see this everywhere and always forget to ask.

fuzion with o-ring is for it to bow and help temps by 2-3 degrees celcius. also, from what i heard, it decreases flow for some reason

If you get the nozzle kit, it comes with a small rubber washer. You place this between the top and the middle section. It forces the water through the hole in the middle section where the nozzle is placed.

The stock washer reduces flow because it seals an internal leak in the block. All the water goes through the main cooling chamber instead of some water going directly to the exit hole. Thus a bit more restriction, thus less flow but better temps. The nozzles that come with the washer kit does block flow. Play with Martins flow rate spreadsheet, you'll see how much.

I don't think the stock washer bows the HS. You have to use a thicker washer (no idea how much) to bow the block.

fuzion is lightly prebowed

Got some of the stuff !! :)
Recieved:
6 Yate Loon's [3 for the radiator, 3 for the case]
Hydrx additive
Danger Den Ione GPU Block
AC Ryan Grill
Thermochill PA120.3
Windowed Side Panel
Logitech G5 Mouse

http://img87.imageshack.us/img87/607...9resizeut4.jpg
http://img100.imageshack.us/img100/6131/img1118hr6.jpg
http://img156.imageshack.us/img156/8425/img1122vt0.jpg
http://img156.imageshack.us/img156/5636/img1123of2.jpg
http://img100.imageshack.us/img100/1480/img1125iq5.jpg
http://img87.imageshack.us/img87/6311/img1127pq4.jpg


Sorry about the quality of the pictures. Just were a bunch of rushed shots. Will take much better pictures later. Still Waiting on the rest of the hardware.....

So now I got everything except for the main blocks tubing and thermal paste. Just waiting for that to really get started. Removed the EVGA heatsink from the 8800 gts. Look's nice.

http://img132.imageshack.us/img132/5...139edituq7.jpg

http://img81.imageshack.us/img81/469/img1142editof0.jpg

http://img301.imageshack.us/img301/6...147editue7.jpg

Will have more Saturday or Monday

NoL and I have been working on this build, sorry for the quality of these pics just to show where we are at in the build. Had to use my cell phone.

http://img357.imageshack.us/img357/4...oto0033ct1.jpg
thats the Microres mounted in drive, the 2 Sata DVD/CD Drives, Floppy Drive, Hard Drive mounted along bottom in center above the 120.3

http://img354.imageshack.us/img354/5...oto0036lw8.jpg
The A.C. Ryan 120x3 Brick Grill that we cut a hole out of the bottom of the lian li and mounted to the bottom. Center fan bolted and cut the edges of the fans so it fits perfectly.

http://img357.imageshack.us/img357/6...oto0034ux8.jpg
The Micro Res Mounted on top drive bays.

http://img354.imageshack.us/img354/2...oto0035we8.jpg
Note where the Hard Drive is. In the center of the bottom section. Modified cage.

http://img357.imageshack.us/img357/3...oto0038se1.jpg
As we began to cut we realized that we didn't know where the dremel holder was. Well.... that's ok. Thanks to NoL's skills we made our own! Motherboard standoffs, screws, drill. It works. Kids, don't try this one at home!

looks good

do you rekon i you fit 3 micro res's next to each in the drive bays...

Can you take a pic of how much clearance you have between the res and the other side of the drive bay

cheers

Course, will take much better pictures tomorrow, I believe you should be able to. as it is "Small size: 4 x 3 x 1.5" (100x76x38mm)" The 1.5 being the Width. So three would be 4.5". But I'll get pictures tomorrow. NoL and I should finish the build tomorrow as the last parts arrive then.

looking forward to it

NoL and I have finished getting everything in and the pc is running. Will post up pictures tonight. It's essentially silent. NoL and I shall be overclocking, tweaking, and cleaning up the insides later as didn't have time last night. We shall add rockers for the cathodes and utilize acrylic to hide and great a better effect of the cathodes themselves. Pics tonight!!!

Looks quite good, just wait to see pics; the glow is justttt right.
And the overall effect is silence :)
That dremel was a bit of intuition, sitting there going hmmm either wait to cut tomorrow or make something tonight; 3 mobo standoffs hahaha. They snapped once or twice and I took a flying disc to the head.

Sorry So Late, But here ya go!!!!

http://img217.imageshack.us/img217/5...1210au3.th.jpg
http://img88.imageshack.us/img88/4581/img1212qm1.th.jpg
http://img207.imageshack.us/img207/6...1214as3.th.jpg
http://img218.imageshack.us/img218/9...1216pn4.th.jpg
http://img219.imageshack.us/img219/7...1217jf8.th.jpg
http://img217.imageshack.us/img217/1...1223bq3.th.jpg
http://img230.imageshack.us/img230/1...1224hr7.th.jpg

More Pics Later!

Looks amazing. Can you PM me some close-up shots of the inside so I can use them for backgrounds on my computer?

Of course, the only thing I'm still trying to figure out is foaming. There seems to be a LOT of foam / small air bubble sections. Worried about that....

I think I figured it out. I moved around the case a bit and got a huge pocket of air to move to the res lowering the water level. I think it was just the fact that I don't know how to bleed the system correctly. I'll bleed it with res open and fill it back up tonight.:)

Nah we were just low on time, tilt the barb end of the radiator way up and air should come out. Add some more of our green liquor ;)

Some Liquor is exactly what the doctor ordered

http://img211.imageshack.us/img211/4...1225ru2.th.jpg
http://img217.imageshack.us/img217/9...1226hg8.th.jpg
http://img215.imageshack.us/img215/5...1227zw8.th.jpg

And this was NoL's fav. part. Not the best pic but better than nothing. Distilled water, Hydrx, and UV Dye =

http://img137.imageshack.us/img137/3...ttleqv1.th.jpg

awesome pics great build

any more pic's of the full case?

Sorry some are out of focus... but overall ok shots...

http://img210.imageshack.us/img210/3...1228vn4.th.jpg
http://img218.imageshack.us/img218/2...1229so0.th.jpg
http://img218.imageshack.us/img218/6...1230yp6.th.jpg
http://img228.imageshack.us/img228/5...1231hg7.th.jpg
http://img210.imageshack.us/img210/11/img1232ss5.th.jpg
http://img221.imageshack.us/img221/1...1233jt6.th.jpg
http://img89.imageshack.us/img89/9259/img1234io5.th.jpg
http://img89.imageshack.us/img89/4651/img1235db6.th.jpg
http://img89.imageshack.us/img89/3736/img1236bl3.th.jpg
http://img228.imageshack.us/img228/19/img1237tl5.th.jpg

Looks madd dude good work :D

Green FTW

Quote:

---

Originally Posted by killswitch_

Looks madd dude good work :D

---

yeh man looks great .
I liked your case - is it a Silverston case ???
I'm considering to buy one , i saw that a PA120.3 can be putted into the buttom case without a problem - can someone confirm thus ???

Thanks for the compliments, it's actually a Lian-Li V2000B Plus. The rad fits barely in between the casters on the bottom. Perfect fit and great for lighting. The PA120.3 is cooling great so far!!!!! All four cores haven't hit over 30C and the GPU is running steady at 32C highest been able to get it so far was 36C. Highly recommend it!

awesome pics mate