-
E8500 + IX38 QuadGT + LN2, 5713MHz
-
Great results man.
This Abits can rock in high fsb.
Interesting how high can Quad GT play your modules.
-
-
damn those are really impressive numbers.. that NB container is pretty extreme :D
-
Really nice scores !! What bios are u using for the E8500 ??
-
thx all, NB needs to be as cool as possible.
I used the lastest official bios m704d12, not the best performer, but FSB is good (and does not crash everytime)
-
@zbogorgon : thats you set from bios or UGURU ? btw NICE SCORE .....:up: :up: my chip E8400 come to my house this weeks I try later with LN2
-
I got headache because of bios, so I have one setting for bios saved in profile and I don't touch them ever again, thank god that uGuru is as good as it's supposed to be, only multiplayer set is missing, during benching I set everything with Guru :D
-
Hm, overall spi score seems to be a bit low - problems due too slow BIOS?
-
yes, with bios 11, perf. rating 45100, but max FSB ~500, so only good for QXes
p.s. and 32M run not optimized at all, I got milion errors, so first one that finished was it.
-
45100 sounds much better :).
X38 doesnt seem to be the right choice for wolfdale at all yet. Maybe a Asus WS board does the trick?
-
Very nice The zbogorgon :toast: I expecialy love that 01 system score (nature a little low with these cards) the high FSb makes wonders in this bench:D :)
-
Quote:
Originally Posted by
symphy
45100 sounds much better :).
X38 doesnt seem to be the right choice for wolfdale at all yet. Maybe a Asus WS board does the trick?
true, but I have this one (don't like asus, expensive in our country, stupid distributors, harder to buy) and I got wolfdale, so I did what I could, I'll much rather have a retail QX9XX0 :D
Quote:
Originally Posted by
SIOUX
Very nice The zbogorgon :toast: I expecialy love that 01 system score (nature a little low with these cards) the high FSb makes wonders in this bench:D :)
yes, Nature sux, no LOD yet and card is only a bit overclocked
-
nice cpu and cooling mate :up:
did you try p35 or 965 mobo? maybe you could go higher...
good luck on more!
-
I didn't, I don't have any here right now and none of my friends has one suitable for heavy benching and I know that I'll probably reach higher FSB than that with it :D
-
-
-
-
What kind of voltages were you running for such high FSB?
-
-
very nice score bro.... :up:
what was the vcore for 3D Bench??
-
-
thx to all, here are voltages, vcore was always aroun 1.80-1.85, higher didn't do any difference, same goes to other voltages.
http://img118.imageshack.us/img118/2...4166yd3.th.jpg
-
Good job.
lepi rezultati,bravo komsije :)
-
How extreme is cooling the NB with LN2?!?!
NICE!
Great results...some more tweaking and you'll reach 100k in `01!
-
Zbogorgon may I ask what were you getting on the pwm temps. I been eyeing this board to go under phase. But the temps on the pwms been scaring me lately.
-
Quote:
Originally Posted by
Crazystang01
Zbogorgon may I ask what were you getting on the pwm temps. I been eyeing this board to go under phase. But the temps on the pwms been scaring me lately.
I honestly don't know, I didn't pay attention, so far I used only dual core in such an extreme way, when I'll use QX, I'll probably use water cooling on PWMs, I already modified one of EK mosfet blocks for that.
-
Hmm thanks for the fast update and yeah I was planing on putting my x6800 in it but looking forward to your updates on quad and got any pics of the modified mosfet block ?
-
i can take a pic of it, but it's really nothing special, EK mosfet block for EVGA i680 with two holes in it :D and one pointy thing sawed off
