Printable View
629FSB with ASUS' fan-less cooling solution and no vmods hehehe
http://img82.imageshack.us/img82/3152/629fsbcpuzkz2.jpg
http://img401.imageshack.us/img401/6439/93421862pf8.jpg
http://img82.imageshack.us/img82/5816/48135698by8.jpg
http://img82.imageshack.us/img82/954...p5bdlx1hy1.jpg
http://img148.imageshack.us/img148/9...p5bdlx2ew3.jpg
CPU- E8500
MB- P5B DLX P965 C2
RAM- Adata 8500
CPU Cooler- Scythe Infinity
VGA- MSI HD3870 X2
HDD- Hitachi 40gb 7200rpm
PSU- Giga-EZ 1000w
Room temp- 26c
Very nice! :D P5B is definitely the queen of boards!
very nice board :D, and cpu too !
PcCI2iminal, any chance you could do FSB comparison with P35? I see a lot of nice results with 965 :)
Great :up: 1M@620fsm is always nice to see on air :) , I believe it can pass 32m @ 600~605, you have nice 8500 can u try it below zero?
P5B = FSB Queen!! :shocked: :clap:
Congratulations for the results!
Very impressive on this old mobo :shocked:
Congratz ,you've got a nice cpu :up:
Impressive clocks...
Keep pushing it.
P5b dlx :eek:
What's the stepping of the e8500 ?
:clap:
This setup could reach >5,9 Ghz theoretically :cool:
yes, normaly, more cold more fsb, fsb will not be the limit for 6ghz :)
how much vmch for 620fsb??
so much for nbcc theory :p or if it was true, penryn changes it
Very nice! P5B DLX, the best for Conroe and Wolfdale, What's the stepping of the E8500? thanks and Congratz ,you've got a nice cpu
Wow very nice man!
hehe, 965 renaissance :lol:
impressive result mate ;)
Is this with pci-e link at x16? Nice fsb :toast:
P5b dlx just keeps on kicking, what a sweetie
Amazing!!:shocked:
This cpu same as last time tested? Try under subzero!
Keep pushing Junior!:up:
Very nice PcCriminal. Wondering if its only rev C2 that does this good? Anyone have a Wolfdale and both revisions of 965 P5B?
hahah nice man
is that my new chip :D
really p5b is a monssTER
Bios version?
Great results.
Wa! Amazing chip!
How stable was that? Barely Pi 1m?
some people will never be happy ^^^^ :p: hehehe
i have the C1 and they don't do special FSB compared to C2Quote:
Originally Posted by loc.o
i am getting a C2 for testing that i know does monster FSB for sure next week so that pair with one of PCCriminals CPUs will me awesome :D
Unbelievable! :toast:
thx guys
you know better than me heheheQuote:
Originally Posted by before
thx
:)
I`ve tried many E8XXX on blitz and premium and getting only 560-570 on airQuote:
Originally Posted by kiwi
I`ve tried 32m at 600FSB and i got an error @ 16loop ,what i need is more vmch than 1.65vQuote:
Originally Posted by Misko
the batch is 45A703Quote:
Originally Posted by antoine76
i can`t wait to give some cold for this setup ,i will be happy with more 20FSB...nah the goal is +30FSB heheheQuote:
Originally Posted by |RickY|
bios setting onlyQuote:
Originally Posted by ziddey
vnb->max and vsfb->max
:up:Quote:
Originally Posted by Zucker2k
yep ,the same wolfyQuote:
Originally Posted by over@locker886
X38->587/590 on air
1226Quote:
Originally Posted by RatusNatus
only pi1m hehehe,the board is unmoded and its hard to keep that frequency at only 1.65v(mch)Quote:
Originally Posted by Speederlander
do you have any memset screenies at high fsb so can see what memory timings you using ?
Quote:
Originally Posted by dinos22
No, this is a fresh run hehehe, you got the #2 hehehe but both are the same, 580-590FSB on air(P5E3 WS)
and I know what you want to do and if the #2 not reach your goal i will help you ,i will send the #1 :)
ah so dinos is buying one of these gems :)
boarded a flight alreadyQuote:
Originally Posted by eva2000
man with that P5B i am getting it will do way over 600 hahaha
race ya to 6GHz junior :D hahahah:D
lol i'm sure it will be perfectQuote:
Originally Posted by PcCI2iminal
you are way too nice :p:
Quote:
Originally Posted by eva2000
no George :(,but i will re-run and i will post everything you need,just give me two or three hours :)
Quote:
Originally Posted by dinos22
#1 will land in australia at sun or monday hehehe
sure :DQuote:
race ya to 6GHz junior :D hahahah:D
Just get 9650 open multi and done with stability problem in any fsb/mhz:)Quote:
Originally Posted by Speederlander
Nice 8500 there PC:up:
Amazing FSB for aircooling
P5B never die, cold storage -26C,The topmost PcCI2iminal.
I've bought me today an P5B Deluxe :) I hope it will run much better than my DFI DK :D
OMG more P5B-D goodness :) I love it!
Bring out more of your P5B-D's from the woodwork people. You need to find the C2 version.:yepp:
dino, would that P5B-D you're getting next week be at all familiar to me? :D If it is, I hope it serve you guys well, that thing is a complete overkill for me :p:
P965 madness!
What is the reason these wolfies run so well in these 965 boards?
Is it the strap?
My P35 won't take it over 530FSB, seriously considering getting a P965 board .
How about the cpu's end speed, do these wolfies run higher end speed as well or is it just better for FSB?
Very nice results there PCcriminal, did you sell all cpu's or do you have some left?
Amazing motherboard O_O
looks like a real FSB killer that chip.. bet u can finde some more in it :)
yeah your old board buddyQuote:
Originally Posted by davemelb
i'm going to mod it and stick it under LN2 with my new high FSB chip from OP here :cool:
really looking forward to it next weekend :)
The commando has good, too.:D
Because one piece of memory was broken, I carried it out with a single channel.:(
on air
http://tokyo.cool.ne.jp/yasukazusimo/652.gif
LN2
http://tokyo.cool.ne.jp/yasukazusimo/5928.08.gif
HOLY DUCK :p:
Almost 6ghz on wolfdale... Extreme... Please inform vcore :)
great E8500..
Why is 965 better than P35 with these chips?
yeah i saw that the other dayQuote:
Originally Posted by duck
shame no 6GHz :( but AWESOME overclock :up:
GO TEAM.AUQuote:
Originally Posted by dinos22
GO YOU GOOD THING :D
Golden chip here, congrats Duck-san. :up: Could you please tell us the FPO/BATCH code?Quote:
Originally Posted by duck
>M.Beier
1.7v on air
2.01v boot 550MHz LN2
>PPInDaHouse
I feel uncertain, but probably BIOS is unfinished.:confused:
>dinos22
I have used up LN2 on the way.:(
I intend to achieve 6GHz on the next time.
I saw your activity well.
There is not the events in Japan, and so I fill with envy at AU.
Good Luck Team AU !:up:
Hi PcCI2iminal
Your record seems to improve better.:)
Do your best toward 6GHz.！
:up: :up: :up: :up: :up: :up: :up:Quote:
Originally Posted by duck
Quote:
Originally Posted by before
Hi before-sama
FSB-652MHz Q748A203(35****) (air)
MAX-5928MHz Q745A703(2V****) (LN2)
Sweet Duck... impressive work and that chip is just nuts...
Keep pushing it.
Quote:
Originally Posted by eva2000
here George
http://img98.imageshack.us/img98/2774/memsetat7.jpg
they are great clockers and no more E8XXX left :(Quote:
Originally Posted by Zeus
Junior, you are the king! Awesome result, especially since it's p965!!! :eek:
very impressive Duck - san ,congrats
I was searching for a Commando in my place but no more Commando to buy in Hiroshima area :(
my chip needs more voltage and i will vmod the P5BQuote:
Your record seems to improve better.
Do your best toward 6GHz.！
PM sent
:)
thx AlexQuote:
Originally Posted by EnJoY
i like Asus P5B series but the PCI-e 1x bug on P5B is killing me :( i tried to raise the pci-e frequency and vNB and sometimes it works and some times no...
yeah that really sucks about P5B :(Quote:
Originally Posted by PcCI2iminal
Ln2 Direct ...
Great motherboard, great results.Quote:
Originally Posted by PcCI2iminal
Did you guys try better NB cooling. :confused: With the NB & SB watercooled, the pcie 1x problem never happen again for me.Quote:
Originally Posted by dinos22
good ideaQuote:
Originally Posted by Learn
thanks for the screenie.. gives me something to try out.. as i think part of the fsb limit is memory related hehQuote:
Originally Posted by PcCI2iminal
Hmm, I've just asked ASUS Scandinavia for a board, hope they'll get it shipped swiftly, please, this pci-e 1x issue... What is it exactly.. And how can it be bypassed ?
congratz PcCI2iminal-San & Duck-San :)
Impressive Chips i965 with the E8500 Wolfdale !!
If I remember right just set pci-e to 100-110 or you had to increase pci-e (sb vcore) volts to smth like 1.6 or soQuote:
Originally Posted by M.Beier
I got the same problem with DFI LP UT P35 but i solved it with pci-e @ 110MHzQuote:
Originally Posted by dinos22
Learn
i will try to get a better cooling but with max voltage(and the NB works hot) and stock clocks the PCI-E works fine at 16x,the problem is when i try to run at 400FSB+,the PCI-e droop to 1x.
thx
I`ve tried to increase the vsb without any luck and checking the cpuz the PCIE-x seems to be 16x but i got 75% less than normal.Quote:
Originally Posted by kiwi
here is a good run when everything works properly
http://img201.imageshack.us/img201/7...3870x22rz6.jpg
Hey guys!
What about "FSB Termination" voltage...? In some post i am reading is should be lowered... i mean we got use to the settings we used with conroe, now wolfdale needs less...
So my question is.
If now I am running 8*480MHz, 1.276V, FSB termination can stay at 1.40V..? Or go lower?
hey guys
lol we tested one of E8500 chips i got off junior........we couldn't pass 580MHz FSB 32M SuperPi stable on P5B DLX that does 600MHz with other chips :( :shrug:
maybe it was the RAM we were using (bunch of corsair dominator PC10000 sticks in single and dual channel and Cellshock single and dual channel CAS4/5 >> but all my dominaotors can bench 650+ MHz no problem so donno eek)...i just can't think of anything else since the chip does 570 prime stable on air with one of junior's boards and around 550 with mine here heh
guess no 6GHz for us heheh
we were able to bench the same with 1.67v and later 1.8v ..... i'll certainly be hammering other boards with this CPU until i do some 600+ MHz FSB benchmarks :D
we had gradually increased NB volts to 1.85v while under watercooling and never going past 26C lol
http://img401.imageshack.us/img401/8673/79724010fb8.jpg[/URL]
http://img175.imageshack.us/img175/6066/86790726nx4.jpg[/URL]
http://img211.imageshack.us/img211/4822/22410751jr8.jpg[/URL]
http://img405.imageshack.us/img405/3373/84199700jt4.jpg[/URL]
this is as high as we could go untweaked running CAS5
http://img86.imageshack.us/img86/935...superpifa9.jpg
Very nice overclock :D
Nice pics. Too bad for the MB :( 590 is not bad FSB with this MB.
Oh man, sucks that it didn't work out dino :(
You guys put in alot of effort, but always seems to be running into a wall somewhere :cussing: . It doesn't seem fair.
But good pics and good work so far. I'll continue to cheer for Team.AU. :YIPPIE:
dinos22, its probably chipset :) I could do validation @ 636 but anything above 570 was not 32M stable. 600 was ok for 1M
Chipset DI/LN2 cooled + 2V should help, I am going for 9x640 next week and 6Ghz when I get 8500 :)
Nice Clocks
Tried the same today Dinos. Same E8500 and Commando that wil do 600mhz FSB 32M with 6 multi on air. Problems to get over 593 with 9.5 multi though. Chip boots at -100 and runs -140 fine. No tweaks or pmem and cas5:
http://img.photobucket.com/albums/v6.../5611E8500.jpg
Great clocks mate, do you think you were fsb limited at 9.5 multi or was it just the cpu speed coming to a grinding halt?
I can imagine 5611MHz is pretty much all it had in it.
Not sure Zeus. Ran it at Extera's, thanks a lot my friend it was good fun :up: Gained a lot goin up from 1.64 to 1.84v but not a mhz from 1.84 to 1.95v. Think/hope it was board but we ran out of time unfortunately.
i don't think that's the caseQuote:
Originally Posted by kiwi
i was 32M stable at 580 on 6 and 9 multi as well 585 8M SuperPi spotty and 1M 590
so i was just maxed out by FSB here donno
davemelb has done dual 32M SuperPi on air cooling at 600MHz (well it stopped 3/4 way which is very close to stable with some other CPUs) >> I have them at home
the chip i benched was happy doing the same tests with 1.67v as 1.8v so my chip certainly had plenty of steam left in it :)Quote:
Originally Posted by Zeus
nice clock my friend ,congratsQuote:
Originally Posted by loc.o
Dino-san, its bad to hear about the FSB limit on P965,with the same chip i was benching at 600+ on X38 and no more than 590 on P35 ,both dice cooled,i think the fsb limit is memory(divider?!?) related or imature bios (Blitz 1402 ),anyway i got a spare E8500 ,630FSB on air and its enough for 6ghz,and how i promisse to u i will send it for you (but you send me back after finishing :) )
hey dudeQuote:
Originally Posted by PcCI2iminal
nah man i am not posting in your thread to complain or anything it's all good lol
btw i finally received those VRs and sending it all to kayl today to send with the goodies :up:
i will test it on X38 boards on LN2 soon
fingers crossed 600 stable :D for some 5.7GHz benching hehehe
dinos22
Hmm, maybe I misunderstood you. You have p5b dlx that maxes out @ what fsb (on air) with other chips, 600+? So, you also have 8500 that maxes at 590 1M on the same dlx?
If that's the case then it is cpu wall already on air. Freeze it and wall will rise up to 50-60fsb in the best case :)
I have tested 4 chips on 965. They all max out 620fsb flat on air. I must be either very luck or many 45nm will do 600+ easily :)
it must be my explanation hehe
this board used to below to a member called davemelb who tested 3xE8400 CPUs and all of them benchmarked 590MHz FSB with ease on air cooling
i don't know where the wall on this E8500 is as i haven't got the right board yet that can give me the FSB i need but i would not be surprised to take 6GHz screenshots if i found the right board as this CPU is a great overclocker with very low vcore and also it's a very hot CPU as well.....all the makings of a great chip :D hahahah
dinos22 when we are talking about high fsb CPUs, what did u do with 620mhz air 6850?
i just tested it on air and did some 580 32Ms from memory and sent it owards because yorkfield was in town...who'd waste time on old tech right :pQuote:
Originally Posted by Misko
right :)Quote:
Originally Posted by dinos22
it's a real shame i was so late to the race with these because i've had soo many nice CPUs but just a touch too lateQuote:
Originally Posted by Misko
right now i'm trying to get some great dual cores for current platform
it seems that it's more of a motherboard hunt now than CPU hunt :rofl:
Quote:
Originally Posted by before
Can you please let me know what settings you've made to rise the memory frequency above 1200 MHz on Asus Commando?
Thanks!!
which X38 board you used to get 600+ fsb??
Quote:
Originally Posted by dinos22
NewBeetle-san done 6Ghz, but not share here yet..:D
why is that not unusual to hear :DQuote:
Originally Posted by over@locker886
As far as I can see, I reckon that about 85% (or even more) of the E8500 cpu's are capable of 6G screenshots with the right motherboard :) .Quote:
Originally Posted by dinos22
Quote:
Originally Posted by massman
ill have one of those mother boards please :yepp:
lol meeeeeee toooooooooooooo :DQuote:
Originally Posted by kayl
nice clock you all have.
really tempting to buy one of those chips when my commando comes back from rma.
What do these puppies on air ???
hehe:D http://valid.x86-secret.com/show_oc.php?id=309702Quote:
Originally Posted by dinos22
The only boards I'd try out for high clocks are the Asus Commando and DFI LP P35, I think. However, you just have to be very lucky (like always LOL) ... once the P35 biosses are tuned well for Wolfdales, we'll see more and more 6G's :DQuote:
Originally Posted by kayl
Quote:
Originally Posted by dinos22
lol,I know my friend but mine seems to be a bit better and probably will hit 6ghz,of course i want that number and I'm searching for LN2(thx Duck-san & Omega-san for helping) for a 6ghz screen but I need some time (weeks i think)and you are ready to do it now,so you go first hehehe,thats it :)
Quote:
Originally Posted by sunny7day
Asus P5E3 WS Pro with no mods hits 600FSB+
Tested on 45nm cpu ?Quote:
Originally Posted by PcCI2iminal