E8500 meets LN2

Setup:

Intel C2D E8500 Batch Q740A
Asus P5K Vanilla full moded
2048 MB DDR2 Kingston 9600
LN2 Container "Lazar"


http://www.abload.de/img/imgp2255svf.jpg

Spi1M sub 8 Result :

http://www.abload.de/img/7985hai.jpg

images are missing ???

Very very nice :eek:

congrats m8..very nice chip,
and also nice to see p5k vanilla still rocks with wolfdale :up:

very impressive.,

Nice CPU and nice Ram :clap: Oh and nice Motherboard :) The vanilla PK5 always amazes me.

But i don't like the VR's being too far away from the soldering points. Keep them closer. There is a lot going on and they will pickup interference.

But hey doesn't look to have held you back :up:

Quote:

---

Originally Posted by eva2000

images are missing ???

---

please refresh your browser.

Quote:

---

Originally Posted by 4Qman

very impressive.,

Nice CPU and nice Ram :clap: Oh and nice Motherboard :) The vanilla PK5 always amazes me.

But i don't like the VR's being too far away from the soldering points. Keep them closer. There is a lot going on and they will pickup interference.

But hey doesn't look to have held you back :up:

---

Vanilla is the choise on LN2 !
I have good experience with the VR's far away from soldering points.
On QX9650 this Setup performs good as well.
Check this thread
http://www.awardfabrik.de/forum/showthread.php?t=2691

The Session with stummerwinter and joe_cool.

;)

ah now i see it sub 8 seconds congrats!

nice one, did you compare max fsb on air vs ln2 ?

Quote:

---

Originally Posted by Pt1t

nice one, did you compare max fsb on air vs ln2 ?

---

max fsb on water 580 / Spi1m stable ;)
VID : 1,0500V :eek:

Quote:

---

Originally Posted by monteboy

max fsb on water 580 / Spi1m stable ;)
VID : 1,0500V :eek:

---

Same Vid as mine :D

http://www.pt1t.net/E8500/CPUZ_E8500_5ghz_WC.PNG

Quote:

---

Originally Posted by Pt1t

Same Vid as mine :D

http://www.pt1t.net/E8500/CPUZ_E8500_5ghz_WC.PNG

---

lucky guy :) ;)

I have same VID on a e8500 but has COLD BUG :(

jebus...what a chip :slobber: makes me feel like selling my qx9650 and get 4 of those for testing instead lol :)

Cool...

Nice shot...

Very nice run. Great FSB on wolfdale :). Did you gain anything by disabling one core through windows?

Keep the good work up!

Amazing cpu
great frequency

nice cpu :toast:

That is a very impressive Sp1m:shocked:

Impressive frequency, I'd expect 0.15-0.2s faster 1M though :\

Quote:

---

Originally Posted by M.Beier

Impressive frequency, I'd expect 0.15-0.2s faster 1M though :\

---

That's right, but not with a Multi of 9 :D
An older Bios is faster but you can't use half multis.
And this is the main advantage of QX for SPI1M performance , you can see it here :

http://www.abload.de/img/7875o42.jpg

Very nice

}{

very impressive result

i think running with 2 cores enabled instead of 1 will lower your spi time.

Bravo :yepp: :worship:
Nice cip

Very nice CPU! :shocked:

Man, i don´t know where to start... great CPU and FSB, SPI is not bad :D

Is 6GHz feasible? I know that it could be demanding too much of the old vanilla, but can she make it? ;)

great clocks there monte

you think you'll be able to push it further?

Quote:

---

Originally Posted by lazy

great clocks there monte
you think you'll be able to push it further?

---

Who knows ? One more LN2 session is planned.
We will see , i have some ideas to push it further:)

Nice result! :D

I will see the results from the next session... to play to long with the cat :D

some great results again from you - i think one of the few who made sub8s on quad and dual core already :toast:

Bravo ...

When you want to sell it ,tell me .... please ...

I love the motherboard mods. Just fun to look at.

Great job.
I think we will be seeing 6GHz soon.

Well done :clap:
What a pity about efficiency lost. :(
Did you test max clock?

Quote:

---

Originally Posted by Hyperhorn

Well done :clap:
What a pity about efficiency lost. :(
Did you test max clock?

---

It's realy pity!
I didn't test max clock.

Respect bro. I admire your effort. What do you suppose your max stable would be on good WCing, maintaining respectable temps?

Did you test max FSB under air?

Thank you

Quote:

---

Originally Posted by 4Qman

Did you test max FSB under air?

Thank you

---

CPU-Z validation : 603 MHz
SPi1M : 580 MHz

http://valid.x86-secret.com/show_oc.php?id=301659

Impressive chip altough...

Keep pushing it.

monteboy congratz for those impressive clocks! :clap:

Can you please tell me what bios version you using on P5K? I played a bit yesterday with my QX9650 and im facing really big problems using the latest bios (0902). After 1.76v things getting crazy :confused:

Quote:

---

Originally Posted by Astri

monteboy congratz for those impressive clocks! :clap:

Can you please tell me what bios version you using on P5K? I played a bit yesterday with my QX9650 and im facing really big problems using the latest bios (0902). After 1.76v things getting crazy :confused:

---

For Spi1M you should use Bios 603 :) , your CPU will not be recognized but it's faster for spi1m.

For Spi32M you should try 803 :)

Sorry if I'm being offtopic, but could you list the mods you have on the p5k and, maybe, how they are done - a link if they are posted somewhere, please.

Thanks!

Here can you find some pictures/info how they were done:

http://www.awardfabrik.de/forum/showthread.php?t=2616 (pictures)

http://awardfabrik.de/forum/showpost...7&postcount=45 (how to do this mods, scroll down)

great proc :)

odlicni rezultati, sve cestitke monteboy!

very nice results, I have Same batch E8500 as yours :)
I just have to get my but into gear and bench ln2 now

Very nice:up:

thank you guys

@illidan
hvala stari , sledi popravka uskoro

nice clock:up: congrats :clap:

Great work man ,
I see that these 8500 and 8400 are beasts !!